| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 88.2.2. [TC-DGGEN-2.2] Event Functionality [DUT as Server] |
| |
| PICS: |
| - DGGEN.S |
| |
| config: |
| nodeId: "0x12344321" |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| "https://github.com/project-chip/connectedhomeip/tree/master/examples/all-clusters-app/linux#readme |
| Events to be executed as following |
| 1. Compile app using below command in connectedhomeip folder |
| a. ./scripts/run_in_build_env.sh "./scripts/build/build_examples.py --target linux-arm64-all-clusters-no-ble-asan-clang build" |
| 2. Build respective app (all-clusters-app) |
| 3. Commission DUT to TH |
| 4. Open 2nd terminal of DUT and provide the below command to obtain PID of DUT |
| ps -aef|grep all-clusters-app |
| 5. Follow the Verification step below to generate the event in 2nd terminal of DUT " |
| disabled: true |
| |
| - label: "Step 1: Commission DUT to TH" |
| verification: | |
| execute the below mentioned command to put DUT into a commissionable state, Pls use equivalent command on the respective DUT |
| ./chip-all-clusters-app |
| |
| Once DUT reach the commissionable state pls send below mentioned command on TH. Pls use equivalent command on the respective DUT |
| ./chip-tool pairing onnetwork 1 20202021 |
| Verify the commissioning completed with success on TH(chip-tool) from DUT |
| [1650455358.501816][4366:4371] CHIP:TOO: Device commissioning completed with success |
| |
| This step can be skipped if done in a preceding test |
| disabled: true |
| |
| - label: |
| "Step 2: Induce a DUT hardware failure two times as addressed in |
| HardwareFault ENUM table 11.11.6.1. (Ex. Pull the DUT power plug off |
| causing power source failure, and rejoin DUT back to previous TH |
| fabric. Next, repeat power plug off and rejoining DUT back to previous |
| TH fabric one more time.)" |
| PICS: DGGEN.S.E00 |
| verification: | |
| Optional Event so its not compulsory to get the expected outcome |
| |
| To trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor Dut should have capability to generate this event) |
| echo '{"Name":"HardwareFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event hardware-fault-change 1 0 |
| |
| Verify that HardwareFaultChange Event SHALL indicate a change in the set of hardware faults currently |
| detected by the Node. The current and previous field SHALL represent the set of faults as per Section 11.11.6.1, |
| “HardwareFault enum”, On TH(chip-tool) |
| |
| [1684144494.712474][50333:50335] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0000 |
| [1684144494.712481][50333:50335] CHIP:TOO: Event number: 4 |
| [1684144494.712487][50333:50335] CHIP:TOO: Priority: Critical |
| [1684144494.712491][50333:50335] CHIP:TOO: Timestamp: 1684144478245 |
| [1684144494.712532][50333:50335] CHIP:TOO: HardwareFaultChange: { |
| [1684144494.712549][50333:50335] CHIP:TOO: Current: 4 entries |
| [1684144494.712578][50333:50335] CHIP:TOO: [1]: 1 |
| [1684144494.712588][50333:50335] CHIP:TOO: [2]: 2 |
| [1684144494.712595][50333:50335] CHIP:TOO: [3]: 5 |
| [1684144494.712602][50333:50335] CHIP:TOO: [4]: 8 |
| [1684144494.712610][50333:50335] CHIP:TOO: Previous: 2 entries |
| [1684144494.712617][50333:50335] CHIP:TOO: [1]: 1 |
| [1684144494.712623][50333:50335] CHIP:TOO: [2]: 5 |
| [1684144494.712630][50333:50335] CHIP:TOO: } |
| [1684144494.712706][50333:50335] CHIP:EM: <<< [E:38263i S:20357 M:150922929 (Ack:189840504)] (S) Msg TX to 1:0000000000000001 [EDC1] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1684144494.712720][50333:50335] CHIP:IN: (S) Sending msg 150922929 on secure session with LSID: 20357 |
| disabled: true |
| |
| - label: |
| "Step 3: Induce a DUT radio failure two times as addressed in |
| RadioFault ENUM table 11.11.6.2. (Ex. Put the DUT under metallic cover |
| causing WiFi failure. Uncover DUT and make DUT rejoining DUT back to |
| previous TH fabric. Repeat the radio failure one more time and rejoin |
| DUT back to previous TH fabric." |
| PICS: DGGEN.S.E01 |
| verification: | |
| Optional Event so its not compulsory to get the expected outcome |
| |
| To trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor Dut should have capability to generate this event) |
| |
| echo '{"Name":"RadioFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event radio-fault-change 1 0 |
| |
| Verify that RadioFaultChange Event SHALL indicate a change in the set of radio faults currently detected |
| by the Node.TH receives RadioFaultChange event with current and previous data specified by RadioFault ENUM table 11.11.6.2 according to two repeated failures On TH(chip-tool) v |
| |
| [1684144521.151145][50343:50345] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0001 |
| [1684144521.151152][50343:50345] CHIP:TOO: Event number: 5 |
| [1684144521.151160][50343:50345] CHIP:TOO: Priority: Critical |
| [1684144521.151167][50343:50345] CHIP:TOO: Timestamp: 1684144512621 |
| [1684144521.151208][50343:50345] CHIP:TOO: RadioFaultChange: { |
| [1684144521.151223][50343:50345] CHIP:TOO: Current: 4 entries |
| [1684144521.151236][50343:50345] CHIP:TOO: [1]: 1 |
| [1684144521.151248][50343:50345] CHIP:TOO: [2]: 2 |
| [1684144521.151260][50343:50345] CHIP:TOO: [3]: 3 |
| [1684144521.151270][50343:50345] CHIP:TOO: [4]: 4 |
| [1684144521.151283][50343:50345] CHIP:TOO: Previous: 2 entries |
| [1684144521.151293][50343:50345] CHIP:TOO: [1]: 1 |
| [1684144521.151303][50343:50345] CHIP:TOO: [2]: 3 |
| [1684144521.151313][50343:50345] CHIP:TOO: } |
| [1684144521.151392][50343:50345] CHIP:EM: <<< [E:9727i S:1308 M:147284449 (Ack:216976802)] (S) Msg TX to 1:0000000000000001 [EDC1] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1684144521.151406][50343:50345] CHIP:IN: (S) Sending msg 147284449 on secure session with LSID: 1308 |
| disabled: true |
| |
| - label: |
| "Step 4: Induce a DUT radio failure two times as addressed in |
| NetworkFault ENUM table 11.11.6.3. (Ex. Put the DUT under metallic |
| cover causing network failure. Uncover DUT and rejoin DUT back to |
| previous TH fabric. Pull the DUT power plug off causing power source |
| failure. rejoining DUT back to previous TH fabric.)" |
| PICS: DGGEN.S.E02 |
| verification: | |
| Optional Event so its not compulsory to get the expected outcome |
| |
| To trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor Dut should have capability to generate this event) |
| |
| echo '{"Name":"NetworkFaultChange"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event network-fault-change 1 0 |
| |
| Verify that NetworkFaultChange Event SHALL indicate a change in the set of network faults currently |
| TH receives NetworkFaultChange event with current and previous data specified by NetworkFault ENUM table 11.11.2.3 according to two failure causes, On TH(chip-tool) |
| |
| [1684144729.918248][50378:50380] CHIP:DMG: } |
| [1684144729.918277][50378:50380] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0002 |
| [1684144729.918279][50378:50380] CHIP:TOO: Event number: 6 |
| [1684144729.918281][50378:50380] CHIP:TOO: Priority: Critical |
| [1684144729.918282][50378:50380] CHIP:TOO: Timestamp: 1684144547365 |
| [1684144729.918299][50378:50380] CHIP:TOO: NetworkFaultChange: { |
| [1684144729.918306][50378:50380] CHIP:TOO: Current: 3 entries |
| [1684144729.918310][50378:50380] CHIP:TOO: [1]: 1 |
| [1684144729.918312][50378:50380] CHIP:TOO: [2]: 2 |
| [1684144729.918314][50378:50380] CHIP:TOO: [3]: 3 |
| [1684144729.918317][50378:50380] CHIP:TOO: Previous: 2 entries |
| [1684144729.918319][50378:50380] CHIP:TOO: [1]: 1 |
| [1684144729.918321][50378:50380] CHIP:TOO: [2]: 2 |
| [1684144729.918323][50378:50380] CHIP:TOO: } |
| [1684144729.918348][50378:50380] CHIP:EM: <<< [E:3897i S:30865 M:110094271 (Ack:224914158)] (S) Msg TX to 1:0000000000000001 [EDC1] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1684144729.918352][50378:50380] CHIP:IN: (S) Sending msg 110094271 on secure session with LSID: 30865 |
| disabled: true |
| |
| - label: |
| "Step 5: Reboot DUT with a normal reboot process. Rejoin DUT back to |
| previous TH fabric." |
| PICS: DGGEN.S.E03 |
| verification: | |
| To trigger the event give the below command by opening an another terminal in DUT (Below is the example command developed in all-clusters-app to generate the event, Vendor Dut should have capability to generate this event) |
| |
| echo '{"Name":"<BootReason>"}' > /tmp/chip_all_clusters_fifo_<PID> (PID of all-clusters-app) |
| |
| ./chip-tool generaldiagnostics read-event boot-reason 1 0 |
| |
| Read the event data of BootReason specified by Table 103 BootReason ENUM table On TH(chip-tool) |
| |
| [1684144762.620015][50386:50388] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0033 Event 0x0000_0003 |
| [1684144762.620021][50386:50388] CHIP:TOO: Event number: 0 |
| [1684144762.620026][50386:50388] CHIP:TOO: Priority: Critical |
| [1684144762.620032][50386:50388] CHIP:TOO: Timestamp: 1684144422477 |
| [1684144762.620066][50386:50388] CHIP:TOO: BootReason: { |
| [1684144762.620084][50386:50388] CHIP:TOO: BootReason: 0 |
| [1684144762.620090][50386:50388] CHIP:TOO: } |
| [1684144762.620152][50386:50388] CHIP:EM: <<< [E:4771i S:40131 M:192514327 (Ack:118464853)] (S) Msg TX to 1:0000000000000001 [EDC1] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1684144762.620165][50386:50388] CHIP:IN: (S) Sending msg 192514327 on secure session with LSID: 40131 |
| disabled: true |