.github/workflows/build.yaml

# Copyright (c) 2020-2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.

name: Builds

on:
    push:
    pull_request:
    workflow_dispatch:

concurrency:
    group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
    cancel-in-progress: true
  
jobs:
    build_linux_gcc_debug:
        name: Build on Linux (gcc_debug)
        timeout-minutes: 60

        runs-on: ubuntu-latest
        if: github.actor != 'restyled-io[bot]'

        container:
            image: connectedhomeip/chip-build:latest
            volumes:
                - "/tmp/log_output:/tmp/test_logs"
            options:
                --sysctl "net.ipv6.conf.all.disable_ipv6=0
                net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

        steps:
            - name: Dump GitHub context
              env:
                GITHUB_CONTEXT: ${{ toJSON(github) }}
              run: echo "$GITHUB_CONTEXT"
            - name: Dump Concurrency context
              env:
                CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
              run: echo "$CONCURRENCY_CONTEXT"
            - name: Checkout
              uses: actions/checkout@v2
              with:
                  submodules: true

            - name: Bootstrap
              timeout-minutes: 10
              run: scripts/build/gn_bootstrap.sh
            - name: Uploading bootstrap logs
              uses: actions/upload-artifact@v2
              if: ${{ always() }}
              with:
                  name: bootstrap-logs
                  path: |
                   .environment/gn_out/.ninja_log
                   .environment/pigweed-venv/*.log
            - name: Setup Build
              run: scripts/build/gn_gen.sh --args="chip_config_memory_debug_checks=true chip_config_memory_debug_dmalloc=true"
            - name: Run Build
              timeout-minutes: 20
              run: scripts/build/gn_build.sh
            - name: Run Tests
              timeout-minutes: 2
              run: scripts/tests/gn_tests.sh
            # TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
            # TODO https://github.com/project-chip/connectedhomeip/issues/1512
            # - name: Run Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: scripts/tools/codecoverage.sh
            # - name: Upload Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: bash <(curl -s https://codecov.io/bash)
            - name: Setup Build Without Detail Logging
              run: scripts/build/gn_gen.sh --args="chip_detail_logging=false"
            - name: Run Build Without Detail Logging
              timeout-minutes: 20
              run: scripts/build/gn_build.sh
            - name: Setup Build Without Progress Logging
              run: scripts/build/gn_gen.sh --args="chip_detail_logging=false chip_progress_logging=false"
            - name: Run Build Without Progress Logging
              timeout-minutes: 20
              run: scripts/build/gn_build.sh
    build_linux:
        name: Build on Linux (gcc_release, clang, mbedtls)
        timeout-minutes: 60

        runs-on: ubuntu-latest
        if: github.actor != 'restyled-io[bot]'

        container:
            image: connectedhomeip/chip-build:latest
            volumes:
                - "/tmp/log_output:/tmp/test_logs"
            options:
                --sysctl "net.ipv6.conf.all.disable_ipv6=0
                net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

        steps:
            - name: Dump GitHub context
              env:
                GITHUB_CONTEXT: ${{ toJSON(github) }}
              run: echo "$GITHUB_CONTEXT"
            - name: Dump Concurrency context
              env:
                CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
              run: echo "$CONCURRENCY_CONTEXT"
            - name: Checkout
              uses: actions/checkout@v2
              with:
                  submodules: true
            - name: Initialize CodeQL
              if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
              uses: github/codeql-action/init@v1
              with:
                  languages: "cpp"

            - name: Bootstrap
              timeout-minutes: 10
              run: scripts/build/gn_bootstrap.sh
            - name: Uploading bootstrap logs
              uses: actions/upload-artifact@v2
              if: ${{ always() }}
              with:
                  name: bootstrap-logs
                  path: |
                   .environment/gn_out/.ninja_log
                   .environment/pigweed-venv/*.log
            - name: Setup Build, Run Build and Run Tests
              timeout-minutes: 50
              run: |
                  for BUILD_TYPE  in gcc_release clang mbedtls; do
                      case $BUILD_TYPE in
                          "gcc_release") GN_ARGS='is_debug=false';;
                          "clang") GN_ARGS='is_clang=true';;
                          "mbedtls") GN_ARGS='chip_crypto="mbedtls"';;
                      esac

                      scripts/build/gn_gen.sh --args="$GN_ARGS"
                      scripts/build/gn_build.sh
                      scripts/tests/gn_tests.sh
                  done
            # TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
            # TODO https://github.com/project-chip/connectedhomeip/issues/1512
            # - name: Run Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: scripts/tools/codecoverage.sh
            # - name: Upload Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: bash <(curl -s https://codecov.io/bash)
            - name: Remove third_party binaries for CodeQL Analysis
              run: find out -type d -name "third_party" -exec rm -rf {} +
            - name: Remove dbus binaries for CodeQL Analysis
              run: find out -type d -name "dbus" -exec rm -rf {} +
            # - name: Remove nrfxlib binaries for CodeQL Analysis
            #   run: find . -type d -name "nrfxlib" -exec rm -rf {} +
            - name: Perform CodeQL Analysis
              if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
              uses: github/codeql-action/analyze@v1
    build_linux_python_lib:
        name: Build on Linux (python_lib)
        timeout-minutes: 60

        runs-on: ubuntu-latest
        if: github.actor != 'restyled-io[bot]'

        container:
            image: connectedhomeip/chip-build:0.5.0
            volumes:
                - "/tmp/log_output:/tmp/test_logs"
            options:
                --sysctl "net.ipv6.conf.all.disable_ipv6=0
                net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"

        steps:
            - name: Dump GitHub context
              env:
                GITHUB_CONTEXT: ${{ toJSON(github) }}
              run: echo "$GITHUB_CONTEXT"
            - name: Dump Concurrency context
              env:
                CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
              run: echo "$CONCURRENCY_CONTEXT"
            - name: Checkout
              uses: actions/checkout@v2
              with:
                  submodules: true
            - name: Initialize CodeQL
              if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
              uses: github/codeql-action/init@v1
              with:
                  languages: "cpp"

            - name: Bootstrap
              timeout-minutes: 10
              run: scripts/build/gn_bootstrap.sh
            # - name: Uploading bootstrap logs
            #   uses: actions/upload-artifact@v2
            #   if: ${{ always() }}
            #   with:
            #       name: bootstrap-logs
            #       path: |
            #        .environment/gn_out/.ninja_log
            #        .environment/pigweed-venv/*.log
            - name: Setup Build, Run Build and Run Tests
              timeout-minutes: 50
              run: |
                  for BUILD_TYPE  in python_lib; do
                      case $BUILD_TYPE in
                          "python_lib") GN_ARGS='enable_rtti=true enable_pylib=true chip_config_memory_debug_checks=false chip_config_memory_debug_dmalloc=false';;
                      esac

                      scripts/build/gn_gen.sh --args="$GN_ARGS"
                      scripts/build/gn_build.sh
                      scripts/tests/gn_tests.sh
                  done
            # TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
            # TODO https://github.com/project-chip/connectedhomeip/issues/1512
            # - name: Run Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: scripts/tools/codecoverage.sh
            # - name: Upload Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: bash <(curl -s https://codecov.io/bash)
            - name: Remove third_party binaries for CodeQL Analysis
              run: find out -type d -name "third_party" -exec rm -rf {} +
            - name: Remove dbus binaries for CodeQL Analysis
              run: find out -type d -name "dbus" -exec rm -rf {} +
            # - name: Remove nrfxlib binaries for CodeQL Analysis
            #   run: find . -type d -name "nrfxlib" -exec rm -rf {} +
            - name: Perform CodeQL Analysis
              if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
              uses: github/codeql-action/analyze@v1
    build_darwin:
        name: Build on Darwin (clang, python_lib)
        timeout-minutes: 60

        env:
            BUILD_TYPE: clang

        runs-on: macos-latest
        if: github.actor != 'restyled-io[bot]'

        steps:
            - name: Checkout
              uses: actions/checkout@v2
              with:
                  submodules: true
            - name: Setup Environment
              run: brew install openssl pkg-config
            - name: Fix pkgconfig link
              working-directory: /usr/local/lib/pkgconfig
              run: |
                  pwd
                  ls -la /usr/local/Cellar/
                  ls -la /usr/local/Cellar/openssl@1.1
                  OPEN_SSL_VERSION=`ls -la /usr/local/Cellar/openssl@1.1 | cat | tail -n1 | awk '{print $NF}'`
                  ln -s /usr/local/Cellar/openssl@1.1/$OPEN_SSL_VERSION/lib/pkgconfig/* .
            - name: Bootstrap
              timeout-minutes: 10
              run: scripts/build/gn_bootstrap.sh
            - name: Uploading bootstrap logs
              uses: actions/upload-artifact@v2
              if: ${{ always() }}
              with:
                  name: bootstrap-logs
                  path: |
                   .environment/gn_out/.ninja_log
                   .environment/pigweed-venv/*.log
            - name: Setup Build, Run Build and Run Tests
              timeout-minutes: 50
              # Just go ahead and do the "all" build; on Darwin that's fairly
              # fast.  If this ever becomes slow, we can think about ways to do
              # the examples-linux-standalone.yaml tests on darwin without too
              # much code duplication.
              run: |
                  for BUILD_TYPE  in clang python_lib; do
                      case $BUILD_TYPE in
                          "clang") GN_ARGS='is_clang=true target_os="all"';;
                          "python_lib") GN_ARGS='enable_rtti=true enable_pylib=true';;
                      esac
                      scripts/build/gn_gen.sh --args="$GN_ARGS"
                      scripts/build/gn_build.sh
                      scripts/tests/gn_tests.sh
                  done
            # TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
            # TODO https://github.com/project-chip/connectedhomeip/issues/1512
            # - name: Run Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: scripts/tools/codecoverage.sh
            # - name: Upload Code Coverage
            #   if: ${{ contains('main', env.BUILD_TYPE) }}
            #   run: bash <(curl -s https://codecov.io/bash)