blob: 4444cc8e9e44ed4d9e396b904dc5cf2977bcdb0b [file] [log] [blame]
#
# Copyright (c) 2023 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
rsource "../../zephyr/Kconfig"
if CHIP
# See config/zephyr/Kconfig for full definition
config CHIP_DEVICE_VENDOR_NAME
default "Telink Semiconductor"
config CHIP_APP_LOG_LEVEL
int "Logging level in application"
default LOG_DEFAULT_LEVEL
depends on LOG
help
Sets the logging level in the Matter application. Use this configuration
option only within the application. To set the logging level for the
Matter stack, use the MATTER_LOG_LEVEL configuration option.
config CHIP_NFC_COMMISSIONING
bool "Share onboarding payload in NFC tag"
default n
imply I2C
imply ST25DVXXKC
imply NFC
imply NFC_NDEF
imply NFC_NDEF_MSG
imply NFC_NDEF_RECORD
imply NFC_NDEF_URI_REC
imply NFC_NDEF_URI_MSG
help
Enables sharing the onboarding payload in the NFC tag.
# See config/zephyr/Kconfig for full definition
config CHIP_OTA_REQUESTOR
bool
select BOOTLOADER_MCUBOOT
config BOOTLOADER_MCUBOOT
bool
select IMG_MANAGER
select STREAM_FLASH
select STREAM_FLASH_ERASE
config CHIP_OTA_REQUESTOR_BUFFER_SIZE
int "OTA Requestor image buffer size"
default 256
depends on CHIP_OTA_REQUESTOR
help
Configures the size of the buffer used by OTA Requestor when downloading
and writing a new firmware image to flash.
config CHIP_OTA_REQUESTOR_REBOOT_ON_APPLY
bool "Auto-reboot when firmware update is applied"
default y
depends on CHIP_OTA_REQUESTOR
imply REBOOT
help
Reboots the device automatically after downloading a new firmware update
to swap the old and the new firmware images. The reboot happens only when
a user consents to apply the firmware update.
# See config/zephyr/Kconfig for full definition
config CHIP_OTA_IMAGE_BUILD
bool
default y if CHIP_OTA_REQUESTOR
config CHIP_ROTATING_DEVICE_ID
bool "Generate rotating device ID"
default y
help
Enables the rotating device identifier that provides a non-trackable
identifier. The identifier is unique per device and rotates at pre-defined
moments.
config CHIP_EXAMPLE_DEVICE_INFO_PROVIDER
bool "Include default device information provider build"
default y
config CHIP_FACTORY_DATA
bool "Enable Factory Data support"
select ZCBOR
help
Enables support for reading factory data from flash memory partition.
It requires factory_data partition to exist.
config CHIP_FACTORY_DATA_CUSTOM_BACKEND
bool "Enable Factory Data custom backend"
depends on !CHIP_FACTORY_DATA
help
Enables user custom factory data implementation. It cannot be used
with the CHIP_FACTORY_DATA that enabled default Telink factory data
implementation.
config CHIP_FACTORY_DATA_BUILD
bool "Enable Factory Data build"
default n
help
Enables generation of factory data during the building.
It requires factory_data partition to exist.
As a result a new output file factory_data.bin will be created.
config CHIP_FACTORY_DATA_VERSION
int
default 1
help
The Factory data version contains a current version of a factory data
parameter set that the user cannot change.
After moving to the next version of the factory data set, change the default value.
This config is used to validate the version of a factory data set on a device-side
with the version of factory data saved in the Flash memory.
if CHIP_FACTORY_DATA_BUILD
# Factory data definitions
config CHIP_FACTORY_DATA_MERGE_WITH_FIRMWARE
bool "Enable merging generated factory data with the build target .bin file"
default y
help
Enables merging generated factory data with the build target zephyr.bin file.
As a result, output file zephyr.bin will consist of all partitions including
factory data.
# Use default certificates without generating or providing them
config CHIP_FACTORY_DATA_USE_DEFAULT_CERTS
bool "Use default certificates located in Matter repository"
default y
help
Pre-generated certificates can be used for development purpose.
This config includes default pre-generated certificates
which are located in credentials/development/attestation/ directory
instead of generating new ones.
If this config is set to `n` new certificates will be generated.
# Configs for SPAKE2 generation
config CHIP_FACTORY_DATA_GENERATE_SPAKE2_VERIFIER
bool "Enable spake2 verifier generation"
help
Enables generation of spake2 verifier according to
given iteration counter, salt and passcode.
To generate Spake2 verifier a spake2p executable must be available
from system variables environment.
config CHIP_DEVICE_GENERATE_ROTATING_DEVICE_UID
bool "Enable generation of a new Rotating device id unique id"
default y
help
Enables generation of a new Rotating device id unique id.
endif #CHIP_FACTORY_DATA_BUILD
# See config/zephyr/Kconfig for full definition
config CHIP_FACTORY_RESET_ERASE_NVS
bool
default n
endif
config CHIP_LOG_SIZE_OPTIMIZATION
bool "Disable some detailed logs to decrease flash usage"
help
Disables some log levels for specific Matter log modules that provide
information that is too detailed to be used in most cases. You can find
full configuration enabled by this option in the
platform/telink/CHIPPlatformConfig.h file.
config CHIP_BUTTON_MANAGER_IRQ_MODE
bool "Use GPIO in an IRQ mode instead of polling the GPIO"
default PM || BOARD_TLSR9118BDK40D
help
Use GPIO in an IRQ mode to avoid button polling loop and extend the battery lifetime by waking up by GPIO event.
GPIO events are working only with GPIO IRQ. This option changes button matrix configuration.
config CHIP_ENABLE_APPLICATION_STATUS_LED
bool "Enable application status LED"
default !(PM)
help
Enable application status LED.
config CHIP_ENABLE_PM_DURING_BLE
bool "Enable PM during BLE operation"
default PM
help
Enable PM during BLE operation.
config CHIP_OPENTHREAD_TX_POWER
int "OpenThread Transmission power"
range -30 9
default 0
help
OpenThread Transmission power in dBm.
config SHELL_BACKEND_SERIAL_RX_RING_BUFFER_SIZE
int
default 255 if SHELL_BACKEND_SERIAL
config CHIP_ENABLE_POWER_ON_FACTORY_RESET
bool "Enable power on factory reset sequence"
default n
help
Enable power on factory reset sequence. If device power triggered off during
first 5 seconds after power on and this sequence repeated 5 times - factory
reset will be involved.
config CHIP_TASK_STACK_SIZE
int
default 8192
config CHIP_USE_MARS_SENSOR
bool "Use Mars board sensor"
depends on SOC_SERIES_RISCV_TELINK_B9X && (BOARD_TLSR9518ADK80D || BOARD_TLSR9518ADK80D_RETENTION)
default n