| /* |
| * |
| * Copyright (c) 2020-2022 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /* |
| * Copyright (c) 2016-2019, The OpenThread Authors. |
| * All rights reserved. |
| * |
| * Redistribution and use in source and binary forms, with or without |
| * modification, are permitted provided that the following conditions are met: |
| * 1. Redistributions of source code must retain the above copyright |
| * notice, this list of conditions and the following disclaimer. |
| * 2. Redistributions in binary form must reproduce the above copyright |
| * notice, this list of conditions and the following disclaimer in the |
| * documentation and/or other materials provided with the distribution. |
| * 3. Neither the name of the copyright holder nor the |
| * names of its contributors may be used to endorse or promote products |
| * derived from this software without specific prior written permission. |
| * |
| * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" |
| * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE |
| * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE |
| * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE |
| * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR |
| * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF |
| * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS |
| * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN |
| * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) |
| * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE |
| * POSSIBILITY OF SUCH DAMAGE. |
| */ |
| |
| /** |
| * @file |
| * Provides Bluez dbus implementation for BLE |
| */ |
| #include <ble/BleUUID.h> |
| #include <ble/CHIPBleServiceData.h> |
| #include <lib/support/BitFlags.h> |
| #include <lib/support/CHIPMem.h> |
| #include <lib/support/CHIPMemString.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <protocols/Protocols.h> |
| #include <setup_payload/AdditionalDataPayloadGenerator.h> |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| #include <cassert> |
| #include <errno.h> |
| #include <gio/gunixfdlist.h> |
| #include <limits> |
| #include <stdarg.h> |
| #include <strings.h> |
| #include <unistd.h> |
| #include <utility> |
| |
| #include <lib/support/CodeUtils.h> |
| #include <platform/CHIPDeviceLayer.h> |
| #include <platform/DeviceInstanceInfoProvider.h> |
| #include <platform/Linux/BLEManagerImpl.h> |
| #include <system/TLVPacketBufferBackingStore.h> |
| |
| #include "BluezObjectIterator.h" |
| #include "BluezObjectList.h" |
| #include "Helper.h" |
| |
| using namespace ::nl; |
| using namespace chip::Protocols; |
| using chip::Platform::CopyString; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| constexpr uint16_t kMaxConnectRetries = 4; |
| |
| static BluezConnection * GetBluezConnectionViaDevice(BluezEndpoint * apEndpoint); |
| |
| namespace { |
| |
| class BluezEndpointObjectList : public BluezObjectList |
| { |
| public: |
| explicit BluezEndpointObjectList(BluezEndpoint * apEndpoint) |
| { |
| VerifyOrReturn(apEndpoint != nullptr, ChipLogError(DeviceLayer, "apEndpoint is NULL in %s", __func__)); |
| Initialize(apEndpoint->mpObjMgr); |
| } |
| }; |
| |
| } // namespace |
| |
| static gboolean BluezAdvertisingRelease(BluezLEAdvertisement1 * aAdv, GDBusMethodInvocation * aInvocation, gpointer apClosure) |
| { |
| bool isSuccess = false; |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrExit(aAdv != nullptr, ChipLogError(DeviceLayer, "BluezLEAdvertisement1 is NULL in %s", __func__)); |
| ChipLogDetail(DeviceLayer, "Release adv object in %s", __func__); |
| |
| g_dbus_object_manager_server_unexport(endpoint->mpRoot, endpoint->mpAdvPath); |
| endpoint->mIsAdvertising = false; |
| isSuccess = true; |
| exit: |
| |
| return isSuccess ? TRUE : FALSE; |
| } |
| |
| static BluezLEAdvertisement1 * BluezAdvertisingCreate(BluezEndpoint * apEndpoint) |
| { |
| BluezLEAdvertisement1 * adv = nullptr; |
| BluezObjectSkeleton * object; |
| GVariant * serviceData; |
| GVariant * serviceUUID; |
| gchar * localName = nullptr; |
| GVariantBuilder serviceDataBuilder; |
| GVariantBuilder serviceUUIDsBuilder; |
| char * debugStr; |
| |
| VerifyOrExit(apEndpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| if (apEndpoint->mpAdvPath == nullptr) |
| apEndpoint->mpAdvPath = g_strdup_printf("%s/advertising", apEndpoint->mpRootPath); |
| |
| ChipLogDetail(DeviceLayer, "Create adv object at %s", apEndpoint->mpAdvPath); |
| object = bluez_object_skeleton_new(apEndpoint->mpAdvPath); |
| |
| adv = bluez_leadvertisement1_skeleton_new(); |
| |
| g_variant_builder_init(&serviceDataBuilder, G_VARIANT_TYPE("a{sv}")); |
| g_variant_builder_init(&serviceUUIDsBuilder, G_VARIANT_TYPE("as")); |
| |
| g_variant_builder_add(&serviceDataBuilder, "{sv}", apEndpoint->mpAdvertisingUUID, |
| g_variant_new_fixed_array(G_VARIANT_TYPE_BYTE, &apEndpoint->mDeviceIdInfo, |
| sizeof(apEndpoint->mDeviceIdInfo), sizeof(uint8_t))); |
| g_variant_builder_add(&serviceUUIDsBuilder, "s", apEndpoint->mpAdvertisingUUID); |
| |
| if (apEndpoint->mpAdapterName != nullptr) |
| localName = g_strdup_printf("%s", apEndpoint->mpAdapterName); |
| else |
| localName = g_strdup_printf("%s%04x", CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX, getpid() & 0xffff); |
| |
| serviceData = g_variant_builder_end(&serviceDataBuilder); |
| serviceUUID = g_variant_builder_end(&serviceUUIDsBuilder); |
| |
| debugStr = g_variant_print(serviceData, TRUE); |
| ChipLogDetail(DeviceLayer, "SET service data to %s", StringOrNullMarker(debugStr)); |
| g_free(debugStr); |
| |
| bluez_leadvertisement1_set_type_(adv, (apEndpoint->mType & BLUEZ_ADV_TYPE_CONNECTABLE) ? "peripheral" : "broadcast"); |
| // empty manufacturer data |
| // empty solicit UUIDs |
| bluez_leadvertisement1_set_service_data(adv, serviceData); |
| // empty data |
| |
| // Setting "Discoverable" to False on the adapter and to True on the advertisement convinces |
| // Bluez to set "BR/EDR Not Supported" flag. Bluez doesn't provide API to do that explicitly |
| // and the flag is necessary to force using LE transport. |
| bluez_leadvertisement1_set_discoverable(adv, (apEndpoint->mType & BLUEZ_ADV_TYPE_SCANNABLE) ? TRUE : FALSE); |
| if (apEndpoint->mType & BLUEZ_ADV_TYPE_SCANNABLE) |
| bluez_leadvertisement1_set_discoverable_timeout(adv, UINT16_MAX); |
| |
| // advertising name corresponding to the PID and object path, for debug purposes |
| bluez_leadvertisement1_set_local_name(adv, localName); |
| bluez_leadvertisement1_set_service_uuids(adv, serviceUUID); |
| |
| // 0xffff means no appearance |
| bluez_leadvertisement1_set_appearance(adv, 0xffff); |
| |
| bluez_leadvertisement1_set_duration(adv, apEndpoint->mDuration); |
| // empty duration, we don't have a clear notion what it would mean to timeslice between toble and anyone else |
| bluez_leadvertisement1_set_timeout(adv, 0); |
| // empty secondary channel for now |
| |
| bluez_object_skeleton_set_leadvertisement1(object, adv); |
| g_signal_connect(adv, "handle-release", G_CALLBACK(BluezAdvertisingRelease), apEndpoint); |
| |
| g_dbus_object_manager_server_export(apEndpoint->mpRoot, G_DBUS_OBJECT_SKELETON(object)); |
| g_object_unref(object); |
| |
| BLEManagerImpl::NotifyBLEPeripheralAdvConfiguredComplete(true, nullptr); |
| |
| exit: |
| g_free(localName); |
| return adv; |
| } |
| |
| static void BluezAdvStartDone(GObject * aObject, GAsyncResult * aResult, gpointer apClosure) |
| { |
| BluezLEAdvertisingManager1 * advMgr = BLUEZ_LEADVERTISING_MANAGER1(aObject); |
| GError * error = nullptr; |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| gboolean success = FALSE; |
| |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| success = bluez_leadvertising_manager1_call_register_advertisement_finish(advMgr, aResult, &error); |
| if (success == FALSE) |
| { |
| g_dbus_object_manager_server_unexport(endpoint->mpRoot, endpoint->mpAdvPath); |
| } |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: RegisterAdvertisement : %s", error->message)); |
| |
| endpoint->mIsAdvertising = true; |
| |
| ChipLogDetail(DeviceLayer, "RegisterAdvertisement complete"); |
| |
| exit: |
| BLEManagerImpl::NotifyBLEPeripheralAdvStartComplete(success == TRUE, nullptr); |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static void BluezAdvStopDone(GObject * aObject, GAsyncResult * aResult, gpointer apClosure) |
| { |
| BluezLEAdvertisingManager1 * advMgr = BLUEZ_LEADVERTISING_MANAGER1(aObject); |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| GError * error = nullptr; |
| gboolean success = FALSE; |
| |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| success = bluez_leadvertising_manager1_call_unregister_advertisement_finish(advMgr, aResult, &error); |
| |
| if (success == FALSE) |
| { |
| g_dbus_object_manager_server_unexport(endpoint->mpRoot, endpoint->mpAdvPath); |
| } |
| else |
| { |
| endpoint->mIsAdvertising = false; |
| } |
| |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: UnregisterAdvertisement : %s", error->message)); |
| |
| ChipLogDetail(DeviceLayer, "UnregisterAdvertisement complete"); |
| |
| exit: |
| BLEManagerImpl::NotifyBLEPeripheralAdvStopComplete(success == TRUE, nullptr); |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static CHIP_ERROR BluezAdvSetup(BluezEndpoint * endpoint) |
| { |
| BluezLEAdvertisement1 * adv; |
| |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrExit(endpoint->mIsAdvertising == FALSE, ChipLogError(DeviceLayer, "FAIL: Advertising already enabled in %s", __func__)); |
| VerifyOrExit(endpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL endpoint->mpAdapter in %s", __func__)); |
| |
| adv = BluezAdvertisingCreate(endpoint); |
| VerifyOrExit(adv != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL adv in %s", __func__)); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| static CHIP_ERROR BluezAdvStart(BluezEndpoint * endpoint) |
| { |
| GDBusObject * adapter; |
| BluezLEAdvertisingManager1 * advMgr = nullptr; |
| GVariantBuilder optionsBuilder; |
| GVariant * options; |
| |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrExit(!endpoint->mIsAdvertising, |
| ChipLogError(DeviceLayer, "FAIL: Advertising has already been enabled in %s", __func__)); |
| VerifyOrExit(endpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL endpoint->mpAdapter in %s", __func__)); |
| |
| adapter = g_dbus_interface_get_object(G_DBUS_INTERFACE(endpoint->mpAdapter)); |
| VerifyOrExit(adapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL adapter in %s", __func__)); |
| |
| advMgr = bluez_object_get_leadvertising_manager1(BLUEZ_OBJECT(adapter)); |
| VerifyOrExit(advMgr != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL advMgr in %s", __func__)); |
| |
| g_variant_builder_init(&optionsBuilder, G_VARIANT_TYPE("a{sv}")); |
| options = g_variant_builder_end(&optionsBuilder); |
| |
| bluez_leadvertising_manager1_call_register_advertisement(advMgr, endpoint->mpAdvPath, options, nullptr, BluezAdvStartDone, |
| endpoint); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| static CHIP_ERROR BluezAdvStop(BluezEndpoint * endpoint) |
| { |
| GDBusObject * adapter; |
| BluezLEAdvertisingManager1 * advMgr = nullptr; |
| |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrExit(endpoint->mIsAdvertising, |
| ChipLogError(DeviceLayer, "FAIL: Advertising has already been disabled in %s", __func__)); |
| VerifyOrExit(endpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL endpoint->mpAdapter in %s", __func__)); |
| |
| adapter = g_dbus_interface_get_object(G_DBUS_INTERFACE(endpoint->mpAdapter)); |
| VerifyOrExit(adapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL adapter in %s", __func__)); |
| |
| advMgr = bluez_object_get_leadvertising_manager1(BLUEZ_OBJECT(adapter)); |
| VerifyOrExit(advMgr != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL advMgr in %s", __func__)); |
| |
| bluez_leadvertising_manager1_call_unregister_advertisement(advMgr, endpoint->mpAdvPath, nullptr, BluezAdvStopDone, endpoint); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| static gboolean BluezCharacteristicReadValue(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aOptions) |
| { |
| GVariant * val; |
| ChipLogDetail(DeviceLayer, "Received BluezCharacteristicReadValue"); |
| val = bluez_gatt_characteristic1_get_value(aChar); |
| bluez_gatt_characteristic1_complete_read_value(aChar, aInvocation, val); |
| return TRUE; |
| } |
| |
| #if CHIP_BLUEZ_CHAR_WRITE_VALUE |
| static gboolean BluezCharacteristicWriteValue(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aValue, GVariant * aOptions, gpointer apEndpoint) |
| { |
| const uint8_t * tmpBuf; |
| uint8_t * buf; |
| size_t len; |
| bool isSuccess = false; |
| BluezConnection * conn = NULL; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apEndpoint); |
| VerifyOrExit(endpoint != NULL, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| VerifyOrExit(aValue != NULL, ChipLogError(DeviceLayer, "aValue is NULL in %s", __func__)); |
| |
| conn = GetBluezConnectionViaDevice(endpoint); |
| VerifyOrExit(conn != NULL, |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "No CHIP Bluez connection")); |
| |
| bluez_gatt_characteristic1_set_value(aChar, g_variant_ref(aValue)); |
| |
| tmpBuf = (uint8_t *) (g_variant_get_fixed_array(aValue, &len, sizeof(uint8_t))); |
| buf = (uint8_t *) (g_memdup(tmpBuf, len)); |
| |
| BLEManagerImpl::HandleRXCharWrite(conn, buf, len); |
| bluez_gatt_characteristic1_complete_write_value(aChar, aInvocation); |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? TRUE : FALSE; |
| } |
| #endif |
| |
| static gboolean BluezCharacteristicWriteValueError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aValue, GVariant * aOptions, gpointer apClosure) |
| { |
| ChipLogDetail(DeviceLayer, "BluezCharacteristicWriteValueError"); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.NotSupported", |
| "Write for characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicWriteFD(GIOChannel * aChannel, GIOCondition aCond, gpointer apEndpoint) |
| { |
| GVariant * newVal; |
| gchar * buf; |
| ssize_t len; |
| int fd; |
| bool isSuccess = false; |
| |
| BluezConnection * conn = static_cast<BluezConnection *>(apEndpoint); |
| |
| VerifyOrExit(conn != nullptr, ChipLogError(DeviceLayer, "No CHIP Bluez connection in %s", __func__)); |
| |
| VerifyOrExit(!(aCond & G_IO_HUP), ChipLogError(DeviceLayer, "INFO: socket disconnected in %s", __func__)); |
| VerifyOrExit(!(aCond & (G_IO_ERR | G_IO_NVAL)), ChipLogError(DeviceLayer, "INFO: socket error in %s", __func__)); |
| VerifyOrExit(aCond == G_IO_IN, ChipLogError(DeviceLayer, "FAIL: error in %s", __func__)); |
| |
| ChipLogDetail(DeviceLayer, "c1 %s mtu, %d", __func__, conn->mMtu); |
| |
| buf = static_cast<gchar *>(g_malloc(conn->mMtu)); |
| fd = g_io_channel_unix_get_fd(aChannel); |
| |
| len = read(fd, buf, conn->mMtu); |
| |
| VerifyOrExit(len > 0, ChipLogError(DeviceLayer, "FAIL: short read in %s (%zd)", __func__, len)); |
| |
| // Casting len to size_t is safe, since we ensured that it's not negative. |
| newVal = g_variant_new_fixed_array(G_VARIANT_TYPE_BYTE, buf, static_cast<size_t>(len), sizeof(uint8_t)); |
| |
| bluez_gatt_characteristic1_set_value(conn->mpC1, newVal); |
| BLEManagerImpl::HandleRXCharWrite(conn, reinterpret_cast<uint8_t *>(buf), static_cast<size_t>(len)); |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? G_SOURCE_CONTINUE : G_SOURCE_REMOVE; |
| } |
| |
| static void Bluez_gatt_characteristic1_complete_acquire_write_with_fd(GDBusMethodInvocation * invocation, int fd, guint16 mtu) |
| { |
| GUnixFDList * fd_list = g_unix_fd_list_new(); |
| int index; |
| |
| index = g_unix_fd_list_append(fd_list, fd, nullptr); |
| |
| g_dbus_method_invocation_return_value_with_unix_fd_list(invocation, g_variant_new("(@hq)", g_variant_new_handle(index), mtu), |
| fd_list); |
| } |
| |
| static gboolean bluezCharacteristicDestroyFD(GIOChannel * aChannel, GIOCondition aCond, gpointer apEndpoint) |
| { |
| return G_SOURCE_REMOVE; |
| } |
| |
| static gboolean BluezCharacteristicAcquireWrite(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aOptions, gpointer apEndpoint) |
| { |
| int fds[2] = { -1, -1 }; |
| GIOChannel * channel; |
| GSource * watchSource; |
| #if CHIP_ERROR_LOGGING |
| char * errStr; |
| #endif // CHIP_ERROR_LOGGING |
| GVariantDict options; |
| bool isSuccess = false; |
| BluezConnection * conn = nullptr; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apEndpoint); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| conn = GetBluezConnectionViaDevice(endpoint); |
| VerifyOrExit(conn != nullptr, |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "No Chipoble connection")); |
| |
| ChipLogDetail(DeviceLayer, "BluezCharacteristicAcquireWrite is called, conn: %p", conn); |
| |
| if (socketpair(AF_UNIX, SOCK_SEQPACKET | SOCK_NONBLOCK | SOCK_CLOEXEC, 0, fds) < 0) |
| { |
| #if CHIP_ERROR_LOGGING |
| errStr = strerror(errno); |
| #endif // CHIP_ERROR_LOGGING |
| ChipLogError(DeviceLayer, "FAIL: socketpair: %s in %s", StringOrNullMarker(errStr), __func__); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "FD creation failed"); |
| goto exit; |
| } |
| |
| g_variant_dict_init(&options, aOptions); |
| if (g_variant_dict_contains(&options, "mtu") == TRUE) |
| { |
| GVariant * v = g_variant_dict_lookup_value(&options, "mtu", G_VARIANT_TYPE_UINT16); |
| conn->mMtu = g_variant_get_uint16(v); |
| } |
| else |
| { |
| ChipLogError(DeviceLayer, "FAIL: no MTU in options in %s", __func__); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.InvalidArguments", "MTU negotiation failed"); |
| goto exit; |
| } |
| |
| channel = g_io_channel_unix_new(fds[0]); |
| g_io_channel_set_encoding(channel, nullptr, nullptr); |
| g_io_channel_set_close_on_unref(channel, TRUE); |
| g_io_channel_set_buffered(channel, FALSE); |
| conn->mC1Channel.mpChannel = channel; |
| |
| watchSource = g_io_create_watch(channel, static_cast<GIOCondition>(G_IO_HUP | G_IO_IN | G_IO_ERR | G_IO_NVAL)); |
| g_source_set_callback(watchSource, G_SOURCE_FUNC(BluezCharacteristicWriteFD), conn, nullptr); |
| PlatformMgrImpl().GLibMatterContextAttachSource(watchSource); |
| conn->mC1Channel.mWatchSource = watchSource; |
| |
| bluez_gatt_characteristic1_set_write_acquired(aChar, TRUE); |
| |
| Bluez_gatt_characteristic1_complete_acquire_write_with_fd(aInvocation, fds[1], conn->mMtu); |
| close(fds[1]); |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? TRUE : FALSE; |
| } |
| |
| static gboolean BluezCharacteristicAcquireWriteError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aOptions) |
| { |
| ChipLogDetail(DeviceLayer, "BluezCharacteristicAcquireWriteError is called"); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.NotSupported", |
| "AcquireWrite for characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicAcquireNotify(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aOptions, gpointer apEndpoint) |
| { |
| int fds[2] = { -1, -1 }; |
| GIOChannel * channel; |
| GSource * watchSource; |
| #if CHIP_ERROR_LOGGING |
| char * errStr; |
| #endif // CHIP_ERROR_LOGGING |
| GVariantDict options; |
| BluezConnection * conn = nullptr; |
| bool isSuccess = false; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apEndpoint); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| conn = GetBluezConnectionViaDevice(endpoint); |
| VerifyOrExit(conn != nullptr, |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "No Chipoble connection")); |
| |
| g_variant_dict_init(&options, aOptions); |
| if ((g_variant_dict_contains(&options, "mtu") == TRUE)) |
| { |
| GVariant * v = g_variant_dict_lookup_value(&options, "mtu", G_VARIANT_TYPE_UINT16); |
| conn->mMtu = g_variant_get_uint16(v); |
| } |
| |
| if (bluez_gatt_characteristic1_get_notifying(aChar)) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.NotPermitted", "Already notifying"); |
| } |
| if (socketpair(AF_UNIX, SOCK_SEQPACKET | SOCK_NONBLOCK | SOCK_CLOEXEC, 0, fds) < 0) |
| { |
| #if CHIP_ERROR_LOGGING |
| errStr = strerror(errno); |
| #endif // CHIP_ERROR_LOGGING |
| ChipLogError(DeviceLayer, "FAIL: socketpair: %s in %s", StringOrNullMarker(errStr), __func__); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "FD creation failed"); |
| goto exit; |
| } |
| |
| channel = g_io_channel_unix_new(fds[0]); |
| g_io_channel_set_encoding(channel, nullptr, nullptr); |
| g_io_channel_set_close_on_unref(channel, TRUE); |
| g_io_channel_set_buffered(channel, FALSE); |
| conn->mC2Channel.mpChannel = channel; |
| |
| watchSource = g_io_create_watch(channel, static_cast<GIOCondition>(G_IO_HUP | G_IO_ERR | G_IO_NVAL)); |
| g_source_set_callback(watchSource, G_SOURCE_FUNC(bluezCharacteristicDestroyFD), conn, nullptr); |
| PlatformMgrImpl().GLibMatterContextAttachSource(watchSource); |
| conn->mC1Channel.mWatchSource = watchSource; |
| |
| bluez_gatt_characteristic1_set_notify_acquired(aChar, TRUE); |
| |
| // same reply as for AcquireWrite |
| Bluez_gatt_characteristic1_complete_acquire_write_with_fd(aInvocation, fds[1], conn->mMtu); |
| close(fds[1]); |
| |
| conn->mIsNotify = true; |
| BLEManagerImpl::HandleTXCharCCCDWrite(conn); |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? TRUE : FALSE; |
| } |
| |
| static gboolean BluezCharacteristicAcquireNotifyError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| GVariant * aOptions) |
| { |
| ChipLogDetail(DeviceLayer, "TRACE: AcquireNotify is called"); |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.NotSupported", |
| "AcquireNotify for characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicStartNotify(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| gpointer apEndpoint) |
| { |
| bool isSuccess = false; |
| BluezConnection * conn = nullptr; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apEndpoint); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| conn = GetBluezConnectionViaDevice(endpoint); |
| VerifyOrExit(conn != nullptr, |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "No Chipoble connection")); |
| |
| if (bluez_gatt_characteristic1_get_notifying(aChar) == TRUE) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "Characteristic is already subscribed"); |
| } |
| else |
| { |
| bluez_gatt_characteristic1_complete_start_notify(aChar, aInvocation); |
| bluez_gatt_characteristic1_set_notifying(aChar, TRUE); |
| conn->mIsNotify = true; |
| BLEManagerImpl::HandleTXCharCCCDWrite(conn); |
| } |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? TRUE : FALSE; |
| } |
| |
| static gboolean BluezCharacteristicStartNotifyError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.NotSupported", |
| "Subscribing to characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicStopNotify(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| gpointer apEndpoint) |
| { |
| bool isSuccess = false; |
| BluezConnection * conn = nullptr; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apEndpoint); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| conn = GetBluezConnectionViaDevice(endpoint); |
| VerifyOrExit(conn != nullptr, |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "No Chipoble connection")); |
| |
| if (bluez_gatt_characteristic1_get_notifying(aChar) == FALSE) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "Characteristic is already unsubscribed"); |
| } |
| else |
| { |
| bluez_gatt_characteristic1_complete_start_notify(aChar, aInvocation); |
| bluez_gatt_characteristic1_set_notifying(aChar, FALSE); |
| } |
| conn->mIsNotify = false; |
| |
| isSuccess = true; |
| |
| exit: |
| return isSuccess ? TRUE : FALSE; |
| } |
| |
| static gboolean BluezCharacteristicConfirm(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation, |
| gpointer apClosure) |
| { |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| BluezConnection * conn = GetBluezConnectionViaDevice(endpoint); |
| |
| ChipLogDetail(Ble, "Indication confirmation, %p", conn); |
| BLEManagerImpl::HandleTXComplete(conn); |
| |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicStopNotifyError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", |
| "Unsubscribing from characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezCharacteristicConfirmError(BluezGattCharacteristic1 * aChar, GDBusMethodInvocation * aInvocation) |
| { |
| g_dbus_method_invocation_return_dbus_error(aInvocation, "org.bluez.Error.Failed", "Confirm from characteristic is unsupported"); |
| return TRUE; |
| } |
| |
| static gboolean BluezIsDeviceOnAdapter(BluezDevice1 * aDevice, BluezAdapter1 * aAdapter) |
| { |
| return strcmp(bluez_device1_get_adapter(aDevice), g_dbus_proxy_get_object_path(G_DBUS_PROXY(aAdapter))) == 0 ? TRUE : FALSE; |
| } |
| |
| static gboolean BluezIsServiceOnDevice(BluezGattService1 * aService, BluezDevice1 * aDevice) |
| { |
| return strcmp(bluez_gatt_service1_get_device(aService), g_dbus_proxy_get_object_path(G_DBUS_PROXY(aDevice))) == 0 ? TRUE |
| : FALSE; |
| } |
| |
| static gboolean BluezIsCharOnService(BluezGattCharacteristic1 * aChar, BluezGattService1 * aService) |
| { |
| ChipLogDetail(DeviceLayer, "Char1 %s", bluez_gatt_characteristic1_get_service(aChar)); |
| ChipLogDetail(DeviceLayer, "Char1 %s", g_dbus_proxy_get_object_path(G_DBUS_PROXY(aService))); |
| return strcmp(bluez_gatt_characteristic1_get_service(aChar), g_dbus_proxy_get_object_path(G_DBUS_PROXY(aService))) == 0 ? TRUE |
| : FALSE; |
| } |
| |
| static void BluezConnectionInit(BluezConnection * apConn) |
| { |
| // populate the service and the characteristics |
| GList * objects = nullptr; |
| GList * l; |
| BluezEndpoint * endpoint = nullptr; |
| |
| VerifyOrExit(apConn != nullptr, ChipLogError(DeviceLayer, "Bluez connection is NULL in %s", __func__)); |
| |
| endpoint = apConn->mpEndpoint; |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| if (!endpoint->mIsCentral) |
| { |
| apConn->mpService = BLUEZ_GATT_SERVICE1(g_object_ref(apConn->mpEndpoint->mpService)); |
| apConn->mpC1 = BLUEZ_GATT_CHARACTERISTIC1(g_object_ref(endpoint->mpC1)); |
| apConn->mpC2 = BLUEZ_GATT_CHARACTERISTIC1(g_object_ref(endpoint->mpC2)); |
| } |
| else |
| { |
| objects = g_dbus_object_manager_get_objects(endpoint->mpObjMgr); |
| |
| for (l = objects; l != nullptr; l = l->next) |
| { |
| BluezObject * object = BLUEZ_OBJECT(l->data); |
| BluezGattService1 * service = bluez_object_get_gatt_service1(object); |
| |
| if (service != nullptr) |
| { |
| if ((BluezIsServiceOnDevice(service, apConn->mpDevice)) == TRUE && |
| (strcmp(bluez_gatt_service1_get_uuid(service), CHIP_BLE_UUID_SERVICE_STRING) == 0)) |
| { |
| apConn->mpService = service; |
| break; |
| } |
| g_object_unref(service); |
| } |
| } |
| |
| VerifyOrExit(apConn->mpService != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL service in %s", __func__)); |
| |
| for (l = objects; l != nullptr; l = l->next) |
| { |
| BluezObject * object = BLUEZ_OBJECT(l->data); |
| BluezGattCharacteristic1 * char1 = bluez_object_get_gatt_characteristic1(object); |
| |
| if (char1 != nullptr) |
| { |
| if ((BluezIsCharOnService(char1, apConn->mpService) == TRUE) && |
| (strcmp(bluez_gatt_characteristic1_get_uuid(char1), CHIP_PLAT_BLE_UUID_C1_STRING) == 0)) |
| { |
| apConn->mpC1 = char1; |
| } |
| else if ((BluezIsCharOnService(char1, apConn->mpService) == TRUE) && |
| (strcmp(bluez_gatt_characteristic1_get_uuid(char1), CHIP_PLAT_BLE_UUID_C2_STRING) == 0)) |
| { |
| apConn->mpC2 = char1; |
| } |
| else if ((BluezIsCharOnService(char1, apConn->mpService) == TRUE) && |
| (strcmp(bluez_gatt_characteristic1_get_uuid(char1), CHIP_PLAT_BLE_UUID_C3_STRING) == 0)) |
| { |
| apConn->mpC3 = char1; |
| } |
| else |
| { |
| g_object_unref(char1); |
| } |
| if ((apConn->mpC1 != nullptr) && (apConn->mpC2 != nullptr)) |
| { |
| break; |
| } |
| } |
| } |
| |
| VerifyOrExit(apConn->mpC1 != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL C1 in %s", __func__)); |
| VerifyOrExit(apConn->mpC2 != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL C2 in %s", __func__)); |
| } |
| |
| exit: |
| if (objects != nullptr) |
| g_list_free_full(objects, g_object_unref); |
| } |
| |
| static void BluezOTConnectionDestroy(BluezConnection * aConn) |
| { |
| if (aConn) |
| { |
| if (aConn->mpDevice) |
| g_object_unref(aConn->mpDevice); |
| if (aConn->mpService) |
| g_object_unref(aConn->mpService); |
| if (aConn->mpC1) |
| g_object_unref(aConn->mpC1); |
| if (aConn->mpC2) |
| g_object_unref(aConn->mpC2); |
| if (aConn->mpPeerAddress) |
| g_free(aConn->mpPeerAddress); |
| if (aConn->mC1Channel.mWatchSource) |
| { |
| g_source_destroy(aConn->mC1Channel.mWatchSource); |
| g_source_unref(aConn->mC1Channel.mWatchSource); |
| } |
| if (aConn->mC1Channel.mpChannel) |
| g_io_channel_unref(aConn->mC1Channel.mpChannel); |
| if (aConn->mC2Channel.mWatchSource) |
| { |
| g_source_destroy(aConn->mC2Channel.mWatchSource); |
| g_source_unref(aConn->mC2Channel.mWatchSource); |
| } |
| if (aConn->mC2Channel.mpChannel) |
| g_io_channel_unref(aConn->mC2Channel.mpChannel); |
| |
| g_free(aConn); |
| } |
| } |
| |
| static BluezGattCharacteristic1 * BluezCharacteristicCreate(BluezGattService1 * aService, const char * aCharName, |
| const char * aUUID, GDBusObjectManagerServer * aRoot) |
| { |
| char * servicePath = g_strdup(g_dbus_object_get_object_path(g_dbus_interface_get_object(G_DBUS_INTERFACE(aService)))); |
| char * charPath = g_strdup_printf("%s/%s", servicePath, aCharName); |
| BluezObjectSkeleton * object; |
| BluezGattCharacteristic1 * characteristic; |
| |
| ChipLogDetail(DeviceLayer, "Create characteristic object at %s", charPath); |
| object = bluez_object_skeleton_new(charPath); |
| |
| characteristic = bluez_gatt_characteristic1_skeleton_new(); |
| bluez_gatt_characteristic1_set_uuid(characteristic, aUUID); |
| bluez_gatt_characteristic1_set_service(characteristic, servicePath); |
| |
| bluez_object_skeleton_set_gatt_characteristic1(object, characteristic); |
| g_dbus_object_manager_server_export(aRoot, G_DBUS_OBJECT_SKELETON(object)); |
| |
| g_free(charPath); |
| g_free(servicePath); |
| g_object_unref(object); |
| |
| return characteristic; |
| } |
| |
| static void BluezPeripheralRegisterAppDone(GObject * aObject, GAsyncResult * aResult, gpointer apClosure) |
| { |
| GError * error = nullptr; |
| BluezGattManager1 * gattMgr = BLUEZ_GATT_MANAGER1(aObject); |
| |
| gboolean success = bluez_gatt_manager1_call_register_application_finish(gattMgr, aResult, &error); |
| |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: RegisterApplication : %s", error->message)); |
| |
| BLEManagerImpl::NotifyBLEPeripheralRegisterAppComplete(true, nullptr); |
| ChipLogDetail(DeviceLayer, "BluezPeripheralRegisterAppDone done"); |
| |
| exit: |
| if (error != nullptr) |
| { |
| BLEManagerImpl::NotifyBLEPeripheralRegisterAppComplete(false, nullptr); |
| g_error_free(error); |
| } |
| } |
| |
| static CHIP_ERROR BluezPeripheralRegisterApp(BluezEndpoint * endpoint) |
| { |
| GDBusObject * adapter; |
| BluezGattManager1 * gattMgr; |
| GVariantBuilder optionsBuilder; |
| GVariant * options; |
| |
| VerifyOrExit(endpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL endpoint->mpAdapter in %s", __func__)); |
| |
| adapter = g_dbus_interface_get_object(G_DBUS_INTERFACE(endpoint->mpAdapter)); |
| VerifyOrExit(adapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL adapter in %s", __func__)); |
| |
| gattMgr = bluez_object_get_gatt_manager1(BLUEZ_OBJECT(adapter)); |
| VerifyOrExit(gattMgr != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL gattMgr in %s", __func__)); |
| |
| g_variant_builder_init(&optionsBuilder, G_VARIANT_TYPE("a{sv}")); |
| options = g_variant_builder_end(&optionsBuilder); |
| |
| bluez_gatt_manager1_call_register_application(gattMgr, endpoint->mpRootPath, options, nullptr, BluezPeripheralRegisterAppDone, |
| nullptr); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| /// Update the table of open BLE connections whevener a new device is spotted or its attributes have changed. |
| static void UpdateConnectionTable(BluezDevice1 * apDevice, BluezEndpoint & aEndpoint) |
| { |
| const gchar * objectPath = g_dbus_proxy_get_object_path(G_DBUS_PROXY(apDevice)); |
| BluezConnection * connection = static_cast<BluezConnection *>(g_hash_table_lookup(aEndpoint.mpConnMap, objectPath)); |
| |
| if (connection != nullptr && !bluez_device1_get_connected(apDevice)) |
| { |
| ChipLogDetail(DeviceLayer, "Bluez disconnected"); |
| BLEManagerImpl::CHIPoBluez_ConnectionClosed(connection); |
| // TODO: the connection object should be released after BLEManagerImpl finishes cleaning up its resources |
| // after the disconnection. Releasing it here doesn't cause any issues, but it's error-prone. |
| BluezOTConnectionDestroy(connection); |
| g_hash_table_remove(aEndpoint.mpConnMap, objectPath); |
| return; |
| } |
| |
| if (connection == nullptr && !bluez_device1_get_connected(apDevice) && aEndpoint.mIsCentral) |
| { |
| return; |
| } |
| |
| if (connection == nullptr && bluez_device1_get_connected(apDevice) && |
| (!aEndpoint.mIsCentral || bluez_device1_get_services_resolved(apDevice))) |
| { |
| connection = g_new0(BluezConnection, 1); |
| connection->mpPeerAddress = g_strdup(bluez_device1_get_address(apDevice)); |
| connection->mpDevice = static_cast<BluezDevice1 *>(g_object_ref(apDevice)); |
| connection->mpEndpoint = &aEndpoint; |
| BluezConnectionInit(connection); |
| aEndpoint.mpPeerDevicePath = g_strdup(objectPath); |
| g_hash_table_insert(aEndpoint.mpConnMap, aEndpoint.mpPeerDevicePath, connection); |
| |
| ChipLogDetail(DeviceLayer, "New BLE connection %p, device %s, path %s", connection, connection->mpPeerAddress, |
| aEndpoint.mpPeerDevicePath); |
| |
| BLEManagerImpl::HandleNewConnection(connection); |
| } |
| } |
| |
| static void BluezSignalInterfacePropertiesChanged(GDBusObjectManagerClient * aManager, GDBusObjectProxy * aObject, |
| GDBusProxy * aInterface, GVariant * aChangedProperties, |
| const gchar * const * aInvalidatedProps, gpointer apClosure) |
| { |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| VerifyOrReturn(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrReturn(endpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL endpoint->mpAdapter in %s", __func__)); |
| VerifyOrReturn(strcmp(g_dbus_proxy_get_interface_name(aInterface), DEVICE_INTERFACE) == 0, ); |
| |
| BluezDevice1 * device = BLUEZ_DEVICE1(aInterface); |
| VerifyOrReturn(BluezIsDeviceOnAdapter(device, endpoint->mpAdapter)); |
| |
| UpdateConnectionTable(device, *endpoint); |
| } |
| |
| static void BluezHandleNewDevice(BluezDevice1 * device, BluezEndpoint * apEndpoint) |
| { |
| VerifyOrExit(apEndpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| if (apEndpoint->mIsCentral) |
| { |
| return; |
| } |
| |
| // We need to handle device connection both this function and BluezSignalInterfacePropertiesChanged |
| // When a device is connected for first time, this function will be triggerred. |
| // The future connections for the same device will trigger ``Connect'' property change. |
| // TODO: Factor common code in the two function. |
| BluezConnection * conn; |
| VerifyOrExit(bluez_device1_get_connected(device), ChipLogError(DeviceLayer, "FAIL: device is not connected")); |
| |
| conn = static_cast<BluezConnection *>( |
| g_hash_table_lookup(apEndpoint->mpConnMap, g_dbus_proxy_get_object_path(G_DBUS_PROXY(device)))); |
| VerifyOrExit(conn == nullptr, |
| ChipLogError(DeviceLayer, "FAIL: connection already tracked: conn: %p new device: %s", conn, |
| g_dbus_proxy_get_object_path(G_DBUS_PROXY(device)))); |
| |
| conn = g_new0(BluezConnection, 1); |
| conn->mpPeerAddress = g_strdup(bluez_device1_get_address(device)); |
| conn->mpDevice = static_cast<BluezDevice1 *>(g_object_ref(device)); |
| conn->mpEndpoint = apEndpoint; |
| BluezConnectionInit(conn); |
| apEndpoint->mpPeerDevicePath = g_strdup(g_dbus_proxy_get_object_path(G_DBUS_PROXY(device))); |
| ChipLogDetail(DeviceLayer, "Device %s (Path: %s) Connected", conn->mpPeerAddress, apEndpoint->mpPeerDevicePath); |
| g_hash_table_insert(apEndpoint->mpConnMap, g_strdup(g_dbus_proxy_get_object_path(G_DBUS_PROXY(device))), conn); |
| |
| exit: |
| return; |
| } |
| |
| static void BluezSignalOnObjectAdded(GDBusObjectManager * aManager, GDBusObject * aObject, BluezEndpoint * endpoint) |
| { |
| // TODO: right now we do not handle addition/removal of adapters |
| // Primary focus here is to handle addition of a device |
| BluezDevice1 * device = bluez_object_get_device1(BLUEZ_OBJECT(aObject)); |
| if (device == nullptr) |
| { |
| return; |
| } |
| |
| if (BluezIsDeviceOnAdapter(device, endpoint->mpAdapter) == TRUE) |
| { |
| BluezHandleNewDevice(device, endpoint); |
| } |
| |
| g_object_unref(device); |
| } |
| |
| static void BluezSignalOnObjectRemoved(GDBusObjectManager * aManager, GDBusObject * aObject, gpointer apClosure) |
| { |
| // TODO: for Device1, lookup connection, and call otPlatTobleHandleDisconnected |
| // for Adapter1: unclear, crash if this pertains to our adapter? at least null out the endpoint->mpAdapter. |
| // for Characteristic1, or GattService -- handle here via calling otPlatTobleHandleDisconnected, or ignore. |
| } |
| |
| static BluezGattService1 * BluezServiceCreate(gpointer apClosure) |
| { |
| BluezObjectSkeleton * object; |
| BluezGattService1 * service; |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| |
| endpoint->mpServicePath = g_strdup_printf("%s/service", endpoint->mpRootPath); |
| ChipLogDetail(DeviceLayer, "CREATE service object at %s", endpoint->mpServicePath); |
| object = bluez_object_skeleton_new(endpoint->mpServicePath); |
| |
| service = bluez_gatt_service1_skeleton_new(); |
| bluez_gatt_service1_set_uuid(service, "0xFFF6"); |
| // device is only valid for remote services |
| bluez_gatt_service1_set_primary(service, TRUE); |
| |
| // includes -- unclear whether required. Might be filled in later |
| bluez_object_skeleton_set_gatt_service1(object, service); |
| g_dbus_object_manager_server_export(endpoint->mpRoot, G_DBUS_OBJECT_SKELETON(object)); |
| g_object_unref(object); |
| |
| return service; |
| } |
| |
| static void bluezObjectsSetup(BluezEndpoint * apEndpoint) |
| { |
| GList * objects = nullptr; |
| GList * l; |
| char * expectedPath = nullptr; |
| |
| VerifyOrExit(apEndpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| expectedPath = g_strdup_printf("%s/hci%d", BLUEZ_PATH, apEndpoint->mAdapterId); |
| objects = g_dbus_object_manager_get_objects(apEndpoint->mpObjMgr); |
| |
| for (l = objects; l != nullptr && apEndpoint->mpAdapter == nullptr; l = l->next) |
| { |
| BluezObject * object = BLUEZ_OBJECT(l->data); |
| GList * interfaces; |
| GList * ll; |
| interfaces = g_dbus_object_get_interfaces(G_DBUS_OBJECT(object)); |
| |
| for (ll = interfaces; ll != nullptr; ll = ll->next) |
| { |
| if (BLUEZ_IS_ADAPTER1(ll->data)) |
| { // we found the adapter |
| BluezAdapter1 * adapter = BLUEZ_ADAPTER1(ll->data); |
| char * addr = const_cast<char *>(bluez_adapter1_get_address(adapter)); |
| if (apEndpoint->mpAdapterAddr == nullptr) // no adapter address provided, bind to the hci indicated by nodeid |
| { |
| if (strcmp(g_dbus_proxy_get_object_path(G_DBUS_PROXY(adapter)), expectedPath) == 0) |
| { |
| apEndpoint->mpAdapter = static_cast<BluezAdapter1 *>(g_object_ref(adapter)); |
| } |
| } |
| else |
| { |
| if (strcmp(apEndpoint->mpAdapterAddr, addr) == 0) |
| { |
| apEndpoint->mpAdapter = static_cast<BluezAdapter1 *>(g_object_ref(adapter)); |
| } |
| } |
| } |
| } |
| g_list_free_full(interfaces, g_object_unref); |
| } |
| VerifyOrExit(apEndpoint->mpAdapter != nullptr, ChipLogError(DeviceLayer, "FAIL: NULL apEndpoint->mpAdapter in %s", __func__)); |
| bluez_adapter1_set_powered(apEndpoint->mpAdapter, TRUE); |
| |
| // Setting "Discoverable" to False on the adapter and to True on the advertisement convinces |
| // Bluez to set "BR/EDR Not Supported" flag. Bluez doesn't provide API to do that explicitly |
| // and the flag is necessary to force using LE transport. |
| bluez_adapter1_set_discoverable(apEndpoint->mpAdapter, FALSE); |
| |
| exit: |
| g_list_free_full(objects, g_object_unref); |
| g_free(expectedPath); |
| } |
| |
| static BluezConnection * GetBluezConnectionViaDevice(BluezEndpoint * apEndpoint) |
| { |
| BluezConnection * retval = |
| static_cast<BluezConnection *>(g_hash_table_lookup(apEndpoint->mpConnMap, apEndpoint->mpPeerDevicePath)); |
| // ChipLogError(DeviceLayer, "acquire connection object %p in (%s)", retval, __func__); |
| return retval; |
| } |
| |
| #if CHIP_BLUEZ_CENTRAL_SUPPORT |
| static BluezConnection * BluezCharacteristicGetBluezConnection(BluezGattCharacteristic1 * aChar, GVariant * aOptions, |
| BluezEndpoint * apEndpoint) |
| { |
| BluezConnection * retval = NULL; |
| const gchar * path = NULL; |
| GVariantDict options; |
| GVariant * v; |
| |
| VerifyOrExit(apEndpoint != NULL, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| VerifyOrExit(apEndpoint->mIsCentral, ); |
| |
| /* TODO Unfortunately StartNotify/StopNotify doesn't provide info about |
| * peer device in call params so we need look this up ourselves. |
| */ |
| if (aOptions == NULL) |
| { |
| GList * objects; |
| GList * l; |
| GList * ll; |
| |
| objects = g_dbus_object_manager_get_objects(apEndpoint->mpObjMgr); |
| for (l = objects; l != NULL; l = l->next) |
| { |
| BluezDevice1 * device = bluez_object_get_device1(BLUEZ_OBJECT(l->data)); |
| if (device != NULL) |
| { |
| if (BluezIsDeviceOnAdapter(device, apEndpoint->mpAdapter)) |
| { |
| for (ll = objects; ll != NULL; ll = ll->next) |
| { |
| BluezGattService1 * service = bluez_object_get_gatt_service1(BLUEZ_OBJECT(ll->data)); |
| if (service != NULL) |
| { |
| if (BluezIsServiceOnDevice(service, device)) |
| { |
| if (BluezIsCharOnService(aChar, service)) |
| { |
| retval = (BluezConnection *) g_hash_table_lookup( |
| apEndpoint->mpConnMap, g_dbus_proxy_get_object_path(G_DBUS_PROXY(device))); |
| } |
| } |
| g_object_unref(service); |
| if (retval != NULL) |
| break; |
| } |
| } |
| } |
| g_object_unref(device); |
| if (retval != NULL) |
| break; |
| } |
| } |
| |
| g_list_free_full(objects, g_object_unref); |
| } |
| else |
| { |
| g_variant_dict_init(&options, aOptions); |
| |
| v = g_variant_dict_lookup_value(&options, "device", G_VARIANT_TYPE_OBJECT_PATH); |
| |
| VerifyOrExit(v != NULL, ChipLogError(DeviceLayer, "FAIL: No device option in dictionary (%s)", __func__)); |
| |
| path = g_variant_get_string(v, NULL); |
| |
| retval = (BluezConnection *) g_hash_table_lookup(apEndpoint->mpConnMap, path); |
| } |
| |
| exit: |
| return retval; |
| } |
| #endif // CHIP_BLUEZ_CENTRAL_SUPPORT |
| |
| void EndpointCleanup(BluezEndpoint * apEndpoint) |
| { |
| if (apEndpoint != nullptr) |
| { |
| if (apEndpoint->mpOwningName != nullptr) |
| { |
| g_free(apEndpoint->mpOwningName); |
| apEndpoint->mpOwningName = nullptr; |
| } |
| if (apEndpoint->mpAdapterName != nullptr) |
| { |
| g_free(apEndpoint->mpAdapterName); |
| apEndpoint->mpAdapterName = nullptr; |
| } |
| if (apEndpoint->mpAdapterAddr != nullptr) |
| { |
| g_free(apEndpoint->mpAdapterAddr); |
| apEndpoint->mpAdapterAddr = nullptr; |
| } |
| if (apEndpoint->mpRootPath != nullptr) |
| { |
| g_free(apEndpoint->mpRootPath); |
| apEndpoint->mpRootPath = nullptr; |
| } |
| if (apEndpoint->mpAdvPath != nullptr) |
| { |
| g_free(apEndpoint->mpAdvPath); |
| apEndpoint->mpAdvPath = nullptr; |
| } |
| if (apEndpoint->mpServicePath != nullptr) |
| { |
| g_free(apEndpoint->mpServicePath); |
| apEndpoint->mpServicePath = nullptr; |
| } |
| if (apEndpoint->mpConnMap != nullptr) |
| { |
| g_hash_table_destroy(apEndpoint->mpConnMap); |
| apEndpoint->mpConnMap = nullptr; |
| } |
| if (apEndpoint->mpAdvertisingUUID != nullptr) |
| { |
| g_free(apEndpoint->mpAdvertisingUUID); |
| apEndpoint->mpAdvertisingUUID = nullptr; |
| } |
| if (apEndpoint->mpPeerDevicePath != nullptr) |
| { |
| g_free(apEndpoint->mpPeerDevicePath); |
| apEndpoint->mpPeerDevicePath = nullptr; |
| } |
| if (apEndpoint->mpConnectCancellable != nullptr) |
| { |
| g_object_unref(apEndpoint->mpConnectCancellable); |
| apEndpoint->mpConnectCancellable = nullptr; |
| } |
| g_free(apEndpoint); |
| } |
| } |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| static void UpdateAdditionalDataCharacteristic(BluezGattCharacteristic1 * characteristic) |
| { |
| if (characteristic == nullptr) |
| { |
| return; |
| } |
| |
| // Construct the TLV for the additional data |
| GVariant * cValue = nullptr; |
| gpointer data; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| chip::System::PacketBufferHandle bufferHandle; |
| BitFlags<AdditionalDataFields> additionalDataFields; |
| AdditionalDataPayloadGeneratorParams additionalDataPayloadParams; |
| |
| #if CHIP_ENABLE_ROTATING_DEVICE_ID && defined(CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID) |
| uint8_t rotatingDeviceIdUniqueId[ConfigurationManager::kRotatingDeviceIDUniqueIDLength] = {}; |
| MutableByteSpan rotatingDeviceIdUniqueIdSpan(rotatingDeviceIdUniqueId); |
| |
| err = GetDeviceInstanceInfoProvider()->GetRotatingDeviceIdUniqueId(rotatingDeviceIdUniqueIdSpan); |
| SuccessOrExit(err); |
| err = ConfigurationMgr().GetLifetimeCounter(additionalDataPayloadParams.rotatingDeviceIdLifetimeCounter); |
| SuccessOrExit(err); |
| additionalDataPayloadParams.rotatingDeviceIdUniqueId = rotatingDeviceIdUniqueIdSpan; |
| additionalDataFields.Set(AdditionalDataFields::RotatingDeviceId); |
| #endif /* CHIP_ENABLE_ROTATING_DEVICE_ID && defined(CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID) */ |
| |
| err = AdditionalDataPayloadGenerator().generateAdditionalDataPayload(additionalDataPayloadParams, bufferHandle, |
| additionalDataFields); |
| SuccessOrExit(err); |
| |
| data = g_memdup(bufferHandle->Start(), bufferHandle->DataLength()); |
| |
| cValue = g_variant_new_from_data(G_VARIANT_TYPE("ay"), data, bufferHandle->DataLength(), TRUE, g_free, data); |
| bluez_gatt_characteristic1_set_value(characteristic, cValue); |
| |
| return; |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Failed to generate TLV encoded Additional Data (%s)", __func__); |
| } |
| return; |
| } |
| #endif |
| |
| static void BluezPeripheralObjectsSetup(gpointer apClosure) |
| { |
| |
| static const char * const c1_flags[] = { "write", nullptr }; |
| static const char * const c2_flags[] = { "read", "indicate", nullptr }; |
| static const char * const c3_flags[] = { "read", nullptr }; |
| |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| endpoint->mpService = BluezServiceCreate(apClosure); |
| // C1 characteristic |
| endpoint->mpC1 = |
| BluezCharacteristicCreate(endpoint->mpService, g_strdup("c1"), g_strdup(CHIP_PLAT_BLE_UUID_C1_STRING), endpoint->mpRoot); |
| bluez_gatt_characteristic1_set_flags(endpoint->mpC1, c1_flags); |
| |
| g_signal_connect(endpoint->mpC1, "handle-read-value", G_CALLBACK(BluezCharacteristicReadValue), apClosure); |
| g_signal_connect(endpoint->mpC1, "handle-write-value", G_CALLBACK(BluezCharacteristicWriteValueError), NULL); |
| g_signal_connect(endpoint->mpC1, "handle-acquire-write", G_CALLBACK(BluezCharacteristicAcquireWrite), apClosure); |
| g_signal_connect(endpoint->mpC1, "handle-acquire-notify", G_CALLBACK(BluezCharacteristicAcquireNotifyError), NULL); |
| g_signal_connect(endpoint->mpC1, "handle-start-notify", G_CALLBACK(BluezCharacteristicStartNotifyError), NULL); |
| g_signal_connect(endpoint->mpC1, "handle-stop-notify", G_CALLBACK(BluezCharacteristicStopNotifyError), NULL); |
| g_signal_connect(endpoint->mpC1, "handle-confirm", G_CALLBACK(BluezCharacteristicConfirmError), NULL); |
| |
| endpoint->mpC2 = |
| BluezCharacteristicCreate(endpoint->mpService, g_strdup("c2"), g_strdup(CHIP_PLAT_BLE_UUID_C2_STRING), endpoint->mpRoot); |
| bluez_gatt_characteristic1_set_flags(endpoint->mpC2, c2_flags); |
| g_signal_connect(endpoint->mpC2, "handle-read-value", G_CALLBACK(BluezCharacteristicReadValue), apClosure); |
| g_signal_connect(endpoint->mpC2, "handle-write-value", G_CALLBACK(BluezCharacteristicWriteValueError), NULL); |
| g_signal_connect(endpoint->mpC2, "handle-acquire-write", G_CALLBACK(BluezCharacteristicAcquireWriteError), NULL); |
| g_signal_connect(endpoint->mpC2, "handle-acquire-notify", G_CALLBACK(BluezCharacteristicAcquireNotify), apClosure); |
| g_signal_connect(endpoint->mpC2, "handle-start-notify", G_CALLBACK(BluezCharacteristicStartNotify), apClosure); |
| g_signal_connect(endpoint->mpC2, "handle-stop-notify", G_CALLBACK(BluezCharacteristicStopNotify), apClosure); |
| g_signal_connect(endpoint->mpC2, "handle-confirm", G_CALLBACK(BluezCharacteristicConfirm), apClosure); |
| |
| ChipLogDetail(DeviceLayer, "CHIP BTP C1 %s", bluez_gatt_characteristic1_get_service(endpoint->mpC1)); |
| ChipLogDetail(DeviceLayer, "CHIP BTP C2 %s", bluez_gatt_characteristic1_get_service(endpoint->mpC2)); |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| ChipLogDetail(DeviceLayer, "CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING is TRUE"); |
| // Additional data characteristics |
| endpoint->mpC3 = |
| BluezCharacteristicCreate(endpoint->mpService, g_strdup("c3"), g_strdup(CHIP_PLAT_BLE_UUID_C3_STRING), endpoint->mpRoot); |
| bluez_gatt_characteristic1_set_flags(endpoint->mpC3, c3_flags); |
| g_signal_connect(endpoint->mpC3, "handle-read-value", G_CALLBACK(BluezCharacteristicReadValue), apClosure); |
| g_signal_connect(endpoint->mpC3, "handle-write-value", G_CALLBACK(BluezCharacteristicWriteValueError), NULL); |
| g_signal_connect(endpoint->mpC3, "handle-acquire-write", G_CALLBACK(BluezCharacteristicAcquireWriteError), NULL); |
| g_signal_connect(endpoint->mpC3, "handle-acquire-notify", G_CALLBACK(BluezCharacteristicAcquireNotify), apClosure); |
| g_signal_connect(endpoint->mpC3, "handle-start-notify", G_CALLBACK(BluezCharacteristicStartNotify), apClosure); |
| g_signal_connect(endpoint->mpC3, "handle-stop-notify", G_CALLBACK(BluezCharacteristicStopNotify), apClosure); |
| g_signal_connect(endpoint->mpC3, "handle-confirm", G_CALLBACK(BluezCharacteristicConfirm), apClosure); |
| // update the characteristic value |
| UpdateAdditionalDataCharacteristic(endpoint->mpC3); |
| ChipLogDetail(DeviceLayer, "CHIP BTP C3 %s", bluez_gatt_characteristic1_get_service(endpoint->mpC3)); |
| #else |
| ChipLogDetail(DeviceLayer, "CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING is FALSE"); |
| (void) c3_flags; |
| #endif |
| |
| exit: |
| return; |
| } |
| |
| static void BluezOnBusAcquired(GDBusConnection * aConn, const gchar * aName, gpointer apClosure) |
| { |
| BluezEndpoint * endpoint = static_cast<BluezEndpoint *>(apClosure); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| ChipLogDetail(DeviceLayer, "TRACE: Bus acquired for name %s", aName); |
| |
| if (!endpoint->mIsCentral) |
| { |
| endpoint->mpRootPath = g_strdup_printf("/chipoble/%04x", getpid() & 0xffff); |
| endpoint->mpRoot = g_dbus_object_manager_server_new(endpoint->mpRootPath); |
| g_dbus_object_manager_server_set_connection(endpoint->mpRoot, aConn); |
| |
| BluezPeripheralObjectsSetup(apClosure); |
| } |
| |
| exit: |
| return; |
| } |
| |
| #if CHIP_BLUEZ_NAME_MONITOR |
| static void BluezOnNameAcquired(GDBusConnection * aConn, const gchar * aName, gpointer apClosure) |
| { |
| ChipLogDetail(DeviceLayer, "TRACE: Owning name: Acquired %s", aName); |
| } |
| |
| static void BluezOnNameLost(GDBusConnection * aConn, const gchar * aName, gpointer apClosure) |
| { |
| ChipLogDetail(DeviceLayer, "TRACE: Owning name: lost %s", aName); |
| } |
| #endif |
| |
| static CHIP_ERROR StartupEndpointBindings(BluezEndpoint * endpoint) |
| { |
| GDBusObjectManager * manager; |
| GError * error = nullptr; |
| GDBusConnection * conn = nullptr; |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "endpoint is NULL in %s", __func__)); |
| |
| conn = g_bus_get_sync(G_BUS_TYPE_SYSTEM, nullptr, &error); |
| VerifyOrExit(conn != nullptr, ChipLogError(DeviceLayer, "FAIL: get bus sync in %s, error: %s", __func__, error->message)); |
| |
| if (endpoint->mpAdapterName != nullptr) |
| endpoint->mpOwningName = g_strdup_printf("%s", endpoint->mpAdapterName); |
| else |
| endpoint->mpOwningName = g_strdup_printf("C-%04x", getpid() & 0xffff); |
| |
| BluezOnBusAcquired(conn, endpoint->mpOwningName, endpoint); |
| |
| manager = g_dbus_object_manager_client_new_sync( |
| conn, G_DBUS_OBJECT_MANAGER_CLIENT_FLAGS_NONE, BLUEZ_INTERFACE, "/", bluez_object_manager_client_get_proxy_type, |
| nullptr /* unused user data in the Proxy Type Func */, nullptr /*destroy notify */, nullptr /* cancellable */, &error); |
| |
| VerifyOrExit(manager != nullptr, ChipLogError(DeviceLayer, "FAIL: Error getting object manager client: %s", error->message)); |
| |
| endpoint->mpObjMgr = manager; |
| |
| bluezObjectsSetup(endpoint); |
| |
| g_signal_connect(manager, "object-added", G_CALLBACK(BluezSignalOnObjectAdded), endpoint); |
| g_signal_connect(manager, "object-removed", G_CALLBACK(BluezSignalOnObjectRemoved), endpoint); |
| g_signal_connect(manager, "interface-proxy-properties-changed", G_CALLBACK(BluezSignalInterfacePropertiesChanged), endpoint); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| static CHIP_ERROR BluezC2Indicate(ConnectionDataBundle * closure) |
| { |
| BluezConnection * conn = nullptr; |
| GError * error = nullptr; |
| GIOStatus status; |
| const char * buf; |
| size_t len, written; |
| |
| VerifyOrExit(closure != nullptr, ChipLogError(DeviceLayer, "ConnectionDataBundle is NULL in %s", __func__)); |
| |
| conn = closure->mpConn; |
| VerifyOrExit(conn != nullptr, ChipLogError(DeviceLayer, "BluezConnection is NULL in %s", __func__)); |
| VerifyOrExit(conn->mpC2 != nullptr, ChipLogError(DeviceLayer, "FAIL: C2 Indicate: %s", "NULL C2")); |
| |
| if (bluez_gatt_characteristic1_get_notify_acquired(conn->mpC2) == TRUE) |
| { |
| buf = (char *) g_variant_get_fixed_array(closure->mpVal, &len, sizeof(uint8_t)); |
| VerifyOrExit(len <= static_cast<size_t>(std::numeric_limits<gssize>::max()), |
| ChipLogError(DeviceLayer, "FAIL: buffer too large in %s", __func__)); |
| status = g_io_channel_write_chars(conn->mC2Channel.mpChannel, buf, static_cast<gssize>(len), &written, &error); |
| g_variant_unref(closure->mpVal); |
| closure->mpVal = nullptr; |
| |
| VerifyOrExit(status == G_IO_STATUS_NORMAL, ChipLogError(DeviceLayer, "FAIL: C2 Indicate: %s", error->message)); |
| } |
| else |
| { |
| bluez_gatt_characteristic1_set_value(conn->mpC2, closure->mpVal); |
| closure->mpVal = nullptr; |
| } |
| |
| exit: |
| if (closure != nullptr) |
| { |
| if (closure->mpVal) |
| { |
| g_variant_unref(closure->mpVal); |
| } |
| g_free(closure); |
| } |
| |
| if (error != nullptr) |
| g_error_free(error); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| static ConnectionDataBundle * MakeConnectionDataBundle(BLE_CONNECTION_OBJECT apConn, const chip::System::PacketBufferHandle & apBuf) |
| { |
| ConnectionDataBundle * bundle = g_new(ConnectionDataBundle, 1); |
| bundle->mpConn = static_cast<BluezConnection *>(apConn); |
| bundle->mpVal = |
| g_variant_new_fixed_array(G_VARIANT_TYPE_BYTE, apBuf->Start(), apBuf->DataLength() * sizeof(uint8_t), sizeof(uint8_t)); |
| return bundle; |
| } |
| |
| CHIP_ERROR SendBluezIndication(BLE_CONNECTION_OBJECT apConn, chip::System::PacketBufferHandle apBuf) |
| { |
| VerifyOrReturnError(!apBuf.IsNull(), CHIP_ERROR_INVALID_ARGUMENT, ChipLogError(DeviceLayer, "apBuf is NULL in %s", __func__)); |
| return PlatformMgrImpl().GLibMatterContextInvokeSync(BluezC2Indicate, MakeConnectionDataBundle(apConn, apBuf)); |
| } |
| |
| static CHIP_ERROR BluezDisconnect(void * apClosure) |
| { |
| BluezConnection * conn = static_cast<BluezConnection *>(apClosure); |
| GError * error = nullptr; |
| gboolean success; |
| |
| VerifyOrExit(conn != nullptr, ChipLogError(DeviceLayer, "conn is NULL in %s", __func__)); |
| VerifyOrExit(conn->mpDevice != nullptr, ChipLogError(DeviceLayer, "FAIL: Disconnect: %s", "NULL Device")); |
| |
| ChipLogDetail(DeviceLayer, "%s peer=%s", __func__, bluez_device1_get_address(conn->mpDevice)); |
| |
| success = bluez_device1_call_disconnect_sync(conn->mpDevice, nullptr, &error); |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: Disconnect: %s", error->message)); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| return CHIP_NO_ERROR; |
| } |
| |
| static CHIP_ERROR CloseBleconnectionCB(void * apAppState) |
| { |
| return BluezDisconnect(apAppState); |
| } |
| |
| CHIP_ERROR CloseBluezConnection(BLE_CONNECTION_OBJECT apConn) |
| { |
| return PlatformMgrImpl().GLibMatterContextInvokeSync(CloseBleconnectionCB, apConn); |
| } |
| |
| CHIP_ERROR StartBluezAdv(BluezEndpoint * apEndpoint) |
| { |
| CHIP_ERROR err = PlatformMgrImpl().GLibMatterContextInvokeSync(BluezAdvStart, apEndpoint); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, CHIP_ERROR_INCORRECT_STATE, |
| ChipLogError(Ble, "Failed to schedule BluezAdvStart() on CHIPoBluez thread")); |
| return err; |
| } |
| |
| CHIP_ERROR StopBluezAdv(BluezEndpoint * apEndpoint) |
| { |
| CHIP_ERROR err = PlatformMgrImpl().GLibMatterContextInvokeSync(BluezAdvStop, apEndpoint); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, CHIP_ERROR_INCORRECT_STATE, |
| ChipLogError(Ble, "Failed to schedule BluezAdvStop() on CHIPoBluez thread")); |
| return err; |
| } |
| |
| CHIP_ERROR BluezAdvertisementSetup(BluezEndpoint * apEndpoint) |
| { |
| CHIP_ERROR err = PlatformMgrImpl().GLibMatterContextInvokeSync(BluezAdvSetup, apEndpoint); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, CHIP_ERROR_INCORRECT_STATE, |
| ChipLogError(Ble, "Failed to schedule BluezAdvSetup() on CHIPoBluez thread")); |
| return err; |
| } |
| |
| CHIP_ERROR BluezGattsAppRegister(BluezEndpoint * apEndpoint) |
| { |
| CHIP_ERROR err = PlatformMgrImpl().GLibMatterContextInvokeSync(BluezPeripheralRegisterApp, apEndpoint); |
| VerifyOrReturnError(err == CHIP_NO_ERROR, CHIP_ERROR_INCORRECT_STATE, |
| ChipLogError(Ble, "Failed to schedule BluezPeripheralRegisterApp() on CHIPoBluez thread")); |
| return err; |
| } |
| |
| CHIP_ERROR ConfigureBluezAdv(BLEAdvConfig & aBleAdvConfig, BluezEndpoint * apEndpoint) |
| { |
| const char * msg = nullptr; |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| VerifyOrExit(aBleAdvConfig.mpBleName != nullptr, msg = "FAIL: BLE name is NULL"); |
| VerifyOrExit(aBleAdvConfig.mpAdvertisingUUID != nullptr, msg = "FAIL: BLE mpAdvertisingUUID is NULL in %s"); |
| |
| apEndpoint->mpAdapterName = g_strdup(aBleAdvConfig.mpBleName); |
| apEndpoint->mpAdvertisingUUID = g_strdup(aBleAdvConfig.mpAdvertisingUUID); |
| apEndpoint->mAdapterId = aBleAdvConfig.mAdapterId; |
| apEndpoint->mType = aBleAdvConfig.mType; |
| apEndpoint->mDuration = aBleAdvConfig.mDuration; |
| apEndpoint->mDuration = aBleAdvConfig.mDuration; |
| |
| err = ConfigurationMgr().GetBLEDeviceIdentificationInfo(apEndpoint->mDeviceIdInfo); |
| SuccessOrExit(err); |
| |
| #if CHIP_ENABLE_ADDITIONAL_DATA_ADVERTISING |
| apEndpoint->mDeviceIdInfo.SetAdditionalDataFlag(true); |
| #endif |
| |
| exit: |
| if (nullptr != msg) |
| { |
| ChipLogDetail(DeviceLayer, "%s in %s", msg, __func__); |
| err = CHIP_ERROR_INCORRECT_STATE; |
| } |
| return err; |
| } |
| |
| CHIP_ERROR InitBluezBleLayer(bool aIsCentral, char * apBleAddr, BLEAdvConfig & aBleAdvConfig, BluezEndpoint *& apEndpoint) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| bool retval = false; |
| BluezEndpoint * endpoint = nullptr; |
| |
| // initialize server endpoint |
| endpoint = g_new0(BluezEndpoint, 1); |
| VerifyOrExit(endpoint != nullptr, ChipLogError(DeviceLayer, "FAIL: memory allocation in %s", __func__)); |
| |
| if (apBleAddr != nullptr) |
| endpoint->mpAdapterAddr = g_strdup(apBleAddr); |
| else |
| endpoint->mpAdapterAddr = nullptr; |
| |
| endpoint->mpConnMap = g_hash_table_new(g_str_hash, g_str_equal); |
| endpoint->mIsCentral = aIsCentral; |
| |
| if (!aIsCentral) |
| { |
| err = ConfigureBluezAdv(aBleAdvConfig, endpoint); |
| SuccessOrExit(err); |
| } |
| else |
| { |
| endpoint->mAdapterId = aBleAdvConfig.mAdapterId; |
| endpoint->mpConnectCancellable = g_cancellable_new(); |
| } |
| |
| err = PlatformMgrImpl().GLibMatterContextInvokeSync(StartupEndpointBindings, endpoint); |
| VerifyOrExit(err == CHIP_NO_ERROR, ChipLogError(DeviceLayer, "Failed to schedule endpoint initialization")); |
| |
| retval = TRUE; |
| |
| exit: |
| if (retval) |
| { |
| apEndpoint = endpoint; |
| ChipLogDetail(DeviceLayer, "PlatformBlueZInit init success"); |
| } |
| else |
| { |
| EndpointCleanup(endpoint); |
| } |
| |
| return err; |
| } |
| |
| CHIP_ERROR ShutdownBluezBleLayer(BluezEndpoint * apEndpoint) |
| { |
| VerifyOrReturnError(apEndpoint != nullptr, CHIP_ERROR_INVALID_ARGUMENT); |
| g_object_unref(apEndpoint->mpAdapter); |
| EndpointCleanup(apEndpoint); |
| return CHIP_NO_ERROR; |
| } |
| |
| // BluezSendWriteRequest callbacks |
| |
| static void SendWriteRequestDone(GObject * aObject, GAsyncResult * aResult, gpointer apConnection) |
| { |
| BluezGattCharacteristic1 * c1 = BLUEZ_GATT_CHARACTERISTIC1(aObject); |
| GError * error = nullptr; |
| gboolean success = bluez_gatt_characteristic1_call_write_value_finish(c1, aResult, &error); |
| |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: BluezSendWriteRequest : %s", error->message)); |
| BLEManagerImpl::HandleWriteComplete(static_cast<BLE_CONNECTION_OBJECT>(apConnection)); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static CHIP_ERROR SendWriteRequestImpl(ConnectionDataBundle * data) |
| { |
| GVariant * options = nullptr; |
| GVariantBuilder optionsBuilder; |
| |
| VerifyOrExit(data != nullptr, ChipLogError(DeviceLayer, "ConnectionDataBundle is NULL in %s", __func__)); |
| VerifyOrExit(data->mpConn != nullptr, ChipLogError(DeviceLayer, "BluezConnection is NULL in %s", __func__)); |
| VerifyOrExit(data->mpConn->mpC1 != nullptr, ChipLogError(DeviceLayer, "C1 is NULL in %s", __func__)); |
| |
| g_variant_builder_init(&optionsBuilder, G_VARIANT_TYPE_ARRAY); |
| g_variant_builder_add(&optionsBuilder, "{sv}", "type", g_variant_new_string("request")); |
| options = g_variant_builder_end(&optionsBuilder); |
| |
| bluez_gatt_characteristic1_call_write_value(data->mpConn->mpC1, data->mpVal, options, nullptr, SendWriteRequestDone, |
| data->mpConn); |
| |
| exit: |
| g_free(data); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BluezSendWriteRequest(BLE_CONNECTION_OBJECT apConn, chip::System::PacketBufferHandle apBuf) |
| { |
| VerifyOrReturnError(!apBuf.IsNull(), CHIP_ERROR_INVALID_ARGUMENT, ChipLogError(DeviceLayer, "apBuf is NULL in %s", __func__)); |
| return PlatformMgrImpl().GLibMatterContextInvokeSync(SendWriteRequestImpl, MakeConnectionDataBundle(apConn, apBuf)); |
| } |
| |
| // BluezSubscribeCharacteristic callbacks |
| |
| static void OnCharacteristicChanged(GDBusProxy * aInterface, GVariant * aChangedProperties, const gchar * const * aInvalidatedProps, |
| gpointer apConnection) |
| { |
| BLE_CONNECTION_OBJECT connection = static_cast<BLE_CONNECTION_OBJECT>(apConnection); |
| GVariant * value = g_variant_lookup_value(aChangedProperties, "Value", G_VARIANT_TYPE_BYTESTRING); |
| VerifyOrReturn(value != nullptr); |
| |
| size_t bufferLen; |
| auto buffer = g_variant_get_fixed_array(value, &bufferLen, sizeof(uint8_t)); |
| VerifyOrReturn(value != nullptr, ChipLogError(DeviceLayer, "Characteristic value has unexpected type")); |
| |
| BLEManagerImpl::HandleTXCharChanged(connection, static_cast<const uint8_t *>(buffer), bufferLen); |
| } |
| |
| static void SubscribeCharacteristicDone(GObject * aObject, GAsyncResult * aResult, gpointer apConnection) |
| { |
| BluezGattCharacteristic1 * c2 = BLUEZ_GATT_CHARACTERISTIC1(aObject); |
| GError * error = nullptr; |
| gboolean success = bluez_gatt_characteristic1_call_write_value_finish(c2, aResult, &error); |
| |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: BluezSubscribeCharacteristic : %s", error->message)); |
| |
| BLEManagerImpl::HandleSubscribeOpComplete(static_cast<BLE_CONNECTION_OBJECT>(apConnection), true); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static CHIP_ERROR SubscribeCharacteristicImpl(BluezConnection * connection) |
| { |
| BluezGattCharacteristic1 * c2 = nullptr; |
| VerifyOrExit(connection != nullptr, ChipLogError(DeviceLayer, "BluezConnection is NULL in %s", __func__)); |
| VerifyOrExit(connection->mpC2 != nullptr, ChipLogError(DeviceLayer, "C2 is NULL in %s", __func__)); |
| c2 = BLUEZ_GATT_CHARACTERISTIC1(connection->mpC2); |
| |
| // Get notifications on the TX characteristic change (e.g. indication is received) |
| g_signal_connect(c2, "g-properties-changed", G_CALLBACK(OnCharacteristicChanged), connection); |
| bluez_gatt_characteristic1_call_start_notify(connection->mpC2, nullptr, SubscribeCharacteristicDone, connection); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BluezSubscribeCharacteristic(BLE_CONNECTION_OBJECT apConn) |
| { |
| return PlatformMgrImpl().GLibMatterContextInvokeSync(SubscribeCharacteristicImpl, static_cast<BluezConnection *>(apConn)); |
| } |
| |
| // BluezUnsubscribeCharacteristic callbacks |
| |
| static void UnsubscribeCharacteristicDone(GObject * aObject, GAsyncResult * aResult, gpointer apConnection) |
| { |
| BluezGattCharacteristic1 * c2 = BLUEZ_GATT_CHARACTERISTIC1(aObject); |
| GError * error = nullptr; |
| gboolean success = bluez_gatt_characteristic1_call_write_value_finish(c2, aResult, &error); |
| |
| VerifyOrExit(success == TRUE, ChipLogError(DeviceLayer, "FAIL: BluezUnsubscribeCharacteristic : %s", error->message)); |
| |
| // Stop listening to the TX characteristic changes |
| g_signal_handlers_disconnect_by_data(c2, apConnection); |
| BLEManagerImpl::HandleSubscribeOpComplete(static_cast<BLE_CONNECTION_OBJECT>(apConnection), false); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static CHIP_ERROR UnsubscribeCharacteristicImpl(BluezConnection * connection) |
| { |
| VerifyOrExit(connection != nullptr, ChipLogError(DeviceLayer, "BluezConnection is NULL in %s", __func__)); |
| VerifyOrExit(connection->mpC2 != nullptr, ChipLogError(DeviceLayer, "C2 is NULL in %s", __func__)); |
| |
| bluez_gatt_characteristic1_call_stop_notify(connection->mpC2, nullptr, UnsubscribeCharacteristicDone, connection); |
| |
| exit: |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BluezUnsubscribeCharacteristic(BLE_CONNECTION_OBJECT apConn) |
| { |
| return PlatformMgrImpl().GLibMatterContextInvokeSync(UnsubscribeCharacteristicImpl, static_cast<BluezConnection *>(apConn)); |
| } |
| |
| // ConnectDevice callbacks |
| |
| struct ConnectParams |
| { |
| ConnectParams(BluezDevice1 * device, BluezEndpoint * endpoint) : mDevice(device), mEndpoint(endpoint), mNumRetries(0) {} |
| BluezDevice1 * mDevice; |
| BluezEndpoint * mEndpoint; |
| uint16_t mNumRetries; |
| }; |
| |
| static void ConnectDeviceDone(GObject * aObject, GAsyncResult * aResult, gpointer apParams) |
| { |
| BluezDevice1 * device = BLUEZ_DEVICE1(aObject); |
| GError * error = nullptr; |
| gboolean success = bluez_device1_call_connect_finish(device, aResult, &error); |
| ConnectParams * params = static_cast<ConnectParams *>(apParams); |
| |
| assert(params != nullptr); |
| |
| if (!success) |
| { |
| ChipLogError(DeviceLayer, "FAIL: ConnectDevice : %s (%d)", error->message, error->code); |
| |
| // Due to radio interferences or Wi-Fi coexistence, sometimes the BLE connection may not be |
| // established (e.g. Connection Indication Packet is missed by BLE peripheral). In such case, |
| // BlueZ returns "Software caused connection abort error", and we should make a connection retry. |
| // It's important to make sure that the connection is correctly ceased, by calling `Disconnect()` |
| // D-Bus method, or else `Connect()` returns immediately without any effect. |
| if (g_error_matches(error, G_IO_ERROR, G_IO_ERROR_DBUS_ERROR) && params->mNumRetries++ < kMaxConnectRetries) |
| { |
| // Clear the error before usage in subsequent call. |
| g_clear_error(&error); |
| |
| bluez_device1_call_disconnect_sync(device, nullptr, &error); |
| bluez_device1_call_connect(device, params->mEndpoint->mpConnectCancellable, ConnectDeviceDone, params); |
| ExitNow(); |
| } |
| |
| BLEManagerImpl::HandleConnectFailed(CHIP_ERROR_INTERNAL); |
| } |
| else |
| { |
| ChipLogDetail(DeviceLayer, "ConnectDevice complete"); |
| } |
| |
| chip::Platform::Delete(params); |
| |
| exit: |
| if (error != nullptr) |
| g_error_free(error); |
| } |
| |
| static CHIP_ERROR ConnectDeviceImpl(ConnectParams * apParams) |
| { |
| BluezDevice1 * device = apParams->mDevice; |
| BluezEndpoint * endpoint = apParams->mEndpoint; |
| |
| assert(device != nullptr); |
| assert(endpoint != nullptr); |
| |
| g_cancellable_reset(endpoint->mpConnectCancellable); |
| bluez_device1_call_connect(device, endpoint->mpConnectCancellable, ConnectDeviceDone, apParams); |
| g_object_unref(device); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ConnectDevice(BluezDevice1 * apDevice, BluezEndpoint * apEndpoint) |
| { |
| auto params = chip::Platform::New<ConnectParams>(apDevice, apEndpoint); |
| g_object_ref(apDevice); |
| |
| if (PlatformMgrImpl().GLibMatterContextInvokeSync(ConnectDeviceImpl, params) != CHIP_NO_ERROR) |
| { |
| ChipLogError(Ble, "Failed to schedule ConnectDeviceImpl() on CHIPoBluez thread"); |
| g_object_unref(apDevice); |
| chip::Platform::Delete(params); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void CancelConnect(BluezEndpoint * apEndpoint) |
| { |
| assert(apEndpoint->mpConnectCancellable != nullptr); |
| g_cancellable_cancel(apEndpoint->mpConnectCancellable); |
| } |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
