| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.14. [TC-CADMIN-1.14] Open commissioning window twice on DUT using BCM |
| then ECM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| - CADMIN.C.C01.Tx |
| - CADMIN.C.C00.Tx |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| For DUT as comissioner test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "DUT_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| "1. Provision TH_CE using DUT_CR1 (Chip-tool as DUT controller) |
| " |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR3 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On DUT_CR1 , open commissioning window using BCM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Open commisioning window on the TH_CE(all-cluster-app) Log: |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| |
| |
| |
| On TH_CR3, using chip tool connect to the accessory |
| ./chip-tool pairing onnetwork 1 20202021 --commissioner-name gamma |
| |
| Verify you got below message on TH_CE (all-clusters-app) log |
| Commissioning completed successfully |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR2 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On DUT_CR1 , open commissioning window using BCM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Open commisioning window on the TH_CE(all-cluster-app) Log: |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| |
| |
| |
| |
| On TH_CR2 , using chip tool connect to the accessory |
| |
| ./chip-tool pairing onnetwork 1 20202021 --commissioner-name beta |
| |
| Verify you got below message on TH_CE (all-clusters-app) log |
| |
| Commissioning completed successfully |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On DUT_CR1 , open commissioning window using BCM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Open commisioning window on the TH_CE(all-cluster-app) Log: |
| |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On DUT_CR1 , read WindowStatus |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| Verify TH_CE successfully reads windowstatus |
| |
| [1661483425.923623][6917:6917] CHIP:DMG: ReportDataMessage = |
| [1661483425.923649][6917:6917] CHIP:DMG: { |
| [1661483425.923667][6917:6917] CHIP:DMG: AttributeReportIBs = |
| [1661483425.923698][6917:6917] CHIP:DMG: [ |
| [1661483425.923722][6917:6917] CHIP:DMG: AttributeReportIB = |
| [1661483425.923752][6917:6917] CHIP:DMG: { |
| [1661483425.923777][6917:6917] CHIP:DMG: AttributeDataIB = |
| [1661483425.923805][6917:6917] CHIP:DMG: { |
| [1661483425.923834][6917:6917] CHIP:DMG: DataVersion = 0x2b727529, |
| [1661483425.923862][6917:6917] CHIP:DMG: AttributePathIB = |
| [1661483425.923891][6917:6917] CHIP:DMG: { |
| [1661483425.923921][6917:6917] CHIP:DMG: Endpoint = 0x0, |
| [1661483425.923951][6917:6917] CHIP:DMG: Cluster = 0x3c, |
| [1661483425.923981][6917:6917] CHIP:DMG: Attribute = 0x0000_0000, |
| [1661483425.924009][6917:6917] CHIP:DMG: } |
| [1661483425.924040][6917:6917] CHIP:DMG: |
| [1661483425.924070][6917:6917] CHIP:DMG: Data = 2, |
| [1661483425.924097][6917:6917] CHIP:DMG: }, |
| [1661483425.924126][6917:6917] CHIP:DMG: |
| [1661483425.924169][6917:6917] CHIP:DMG: }, |
| [1661483425.924197][6917:6917] CHIP:DMG: |
| [1661483425.924218][6917:6917] CHIP:DMG: ], |
| [1661483425.924244][6917:6917] CHIP:DMG: |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On DUT_CR1 chip tool, open commissioning window using ECM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3840 |
| |
| Verify that the TH_CE is rejecting the opening of second commissioning session with the response status 0x01 failure in TH_CE Log |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650527622.373450][15824:15829] CHIP:DMG: { |
| [1650527622.373531][15824:15829] CHIP:DMG: suppressResponse = false, |
| [1650527622.373628][15824:15829] CHIP:DMG: InvokeResponseIBs = |
| [1650527622.373734][15824:15829] CHIP:DMG: [ |
| [1650527622.373817][15824:15829] CHIP:DMG: InvokeResponseIB = |
| [1650527622.373913][15824:15829] CHIP:DMG: { |
| [1650527622.374001][15824:15829] CHIP:DMG: CommandStatusIB = |
| [1650527622.374087][15824:15829] CHIP:DMG: { |
| [1650527622.374182][15824:15829] CHIP:DMG: CommandPathIB = |
| [1650527622.374296][15824:15829] CHIP:DMG: { |
| [1650527622.374382][15824:15829] CHIP:DMG: EndpointId = 0x0, |
| [1650527622.374490][15824:15829] CHIP:DMG: ClusterId = 0x3c, |
| [1650527622.374593][15824:15829] CHIP:DMG: CommandId = 0x1, |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x1, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| [1650527622.375704][15824:15829] CHIP:DMG: }, |
| [1650527622.375786][15824:15829] CHIP:DMG: |
| [1650527622.375864][15824:15829] CHIP:DMG: ], |
| [1650527622.375940][15824:15829] CHIP:DMG: |
| [1650527622.376000][15824:15829] CHIP:DMG: InteractionModelRevision = 1 |
| [1650527622.376058][15824:15829] CHIP:DMG: }, |
| [1650527622.376202][15824:15829] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1650527622.376278][15824:15829] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01" |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 4" |
| verification: | |
| Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is set in step 4 |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to re-opens a commissioning window |
| with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds using |
| ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On DUT_CR1 chip tool, open commissioning window using ECM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify the Open commisioning window on the TH_CE(all-cluster-app) Log: |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On DUT_CR1 , read WindowStatus |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| Verify TH_CE successfully reads windowstatus |
| |
| [1661482777.283822][6453:6453] CHIP:DMG: ReportDataMessage = |
| [1661482777.283855][6453:6453] CHIP:DMG: { |
| [1661482777.283882][6453:6453] CHIP:DMG: AttributeReportIBs = |
| [1661482777.283921][6453:6453] CHIP:DMG: [ |
| [1661482777.283951][6453:6453] CHIP:DMG: AttributeReportIB = |
| [1661482777.283995][6453:6453] CHIP:DMG: { |
| [1661482777.284036][6453:6453] CHIP:DMG: AttributeDataIB = |
| [1661482777.284080][6453:6453] CHIP:DMG: { |
| [1661482777.284122][6453:6453] CHIP:DMG: DataVersion = 0xd3f3fc78, |
| [1661482777.284289][6453:6453] CHIP:DMG: AttributePathIB = |
| [1661482777.284337][6453:6453] CHIP:DMG: { |
| [1661482777.284385][6453:6453] CHIP:DMG: Endpoint = 0x0, |
| [1661482777.284430][6453:6453] CHIP:DMG: Cluster = 0x3c, |
| [1661482777.284479][6453:6453] CHIP:DMG: Attribute = 0x0000_0000, |
| [1661482777.284522][6453:6453] CHIP:DMG: } |
| [1661482777.284567][6453:6453] CHIP:DMG: |
| [1661482777.284612][6453:6453] CHIP:DMG: Data = 1, |
| [1661482777.284655][6453:6453] CHIP:DMG: }, |
| [1661482777.284699][6453:6453] CHIP:DMG: |
| [1661482777.284733][6453:6453] CHIP:DMG: }, |
| [1661482777.284773][6453:6453] CHIP:DMG: |
| [1661482777.284803][6453:6453] CHIP:DMG: ], |
| [1661482777.284841][6453:6453] CHIP:DMG: |
| [1661482777.284872][6453:6453] CHIP:DMG: SuppressResponse = true, |
| [1661482777.284905][6453:6453] CHIP:DMG: InteractionModelRevision = 1 |
| [1661482777.284934][6453:6453] CHIP:DMG: } |
| [1661482777.284962][6453:6453] CHIP:DMG: |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, TH_CR3 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On TH_CR3 chip tool, open commissioning window using ECM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3840 --commissioner-name beta |
| |
| Verify that the TH_CE is rejecting the opening of second commissioning session with the response status 0x01 failure in TH_CE Log |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650527622.373450][15824:15829] CHIP:DMG: { |
| [1650527622.373531][15824:15829] CHIP:DMG: suppressResponse = false, |
| [1650527622.373628][15824:15829] CHIP:DMG: InvokeResponseIBs = |
| [1650527622.373734][15824:15829] CHIP:DMG: [ |
| [1650527622.373817][15824:15829] CHIP:DMG: InvokeResponseIB = |
| [1650527622.373913][15824:15829] CHIP:DMG: { |
| [1650527622.374001][15824:15829] CHIP:DMG: CommandStatusIB = |
| [1650527622.374087][15824:15829] CHIP:DMG: { |
| [1650527622.374182][15824:15829] CHIP:DMG: CommandPathIB = |
| [1650527622.374296][15824:15829] CHIP:DMG: { |
| [1650527622.374382][15824:15829] CHIP:DMG: EndpointId = 0x0, |
| [1650527622.374490][15824:15829] CHIP:DMG: ClusterId = 0x3c, |
| [1650527622.374593][15824:15829] CHIP:DMG: CommandId = 0x1, |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x1, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| [1650527622.375704][15824:15829] CHIP:DMG: }, |
| [1650527622.375786][15824:15829] CHIP:DMG: |
| [1650527622.375864][15824:15829] CHIP:DMG: ], |
| [1650527622.375940][15824:15829] CHIP:DMG: |
| [1650527622.376000][15824:15829] CHIP:DMG: InteractionModelRevision = 1 |
| [1650527622.376058][15824:15829] CHIP:DMG: }, |
| [1650527622.376202][15824:15829] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1650527622.376278][15824:15829] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01" |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 8" |
| verification: | |
| Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is set in step 8 |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On DUT_CR1 chip tool, open commissioning window using ECM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| Verify the Open commisioning window on the TH_CE(all-cluster-app) Log: |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 12, TH_CR2 sends command to TH_CE to open a second |
| commissioning window with a commissioning timeout of |
| PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On TH_CR2 using chip tool connect to the accessory using ECM |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 --commissioner-name beta |
| |
| Verify that the TH_CE is rejecting the opening of second commissioning session with the response status 0x01 failure in TH_CE Log |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650527622.373450][15824:15829] CHIP:DMG: { |
| [1650527622.373531][15824:15829] CHIP:DMG: suppressResponse = false, |
| [1650527622.373628][15824:15829] CHIP:DMG: InvokeResponseIBs = |
| [1650527622.373734][15824:15829] CHIP:DMG: [ |
| [1650527622.373817][15824:15829] CHIP:DMG: InvokeResponseIB = |
| [1650527622.373913][15824:15829] CHIP:DMG: { |
| [1650527622.374001][15824:15829] CHIP:DMG: CommandStatusIB = |
| [1650527622.374087][15824:15829] CHIP:DMG: { |
| [1650527622.374182][15824:15829] CHIP:DMG: CommandPathIB = |
| [1650527622.374296][15824:15829] CHIP:DMG: { |
| [1650527622.374382][15824:15829] CHIP:DMG: EndpointId = 0x0, |
| [1650527622.374490][15824:15829] CHIP:DMG: ClusterId = 0x3c, |
| [1650527622.374593][15824:15829] CHIP:DMG: CommandId = 0x1, |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x1, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| [1650527622.375704][15824:15829] CHIP:DMG: }, |
| [1650527622.375786][15824:15829] CHIP:DMG: |
| [1650527622.375864][15824:15829] CHIP:DMG: ], |
| [1650527622.375940][15824:15829] CHIP:DMG: |
| [1650527622.376000][15824:15829] CHIP:DMG: InteractionModelRevision = 1 |
| [1650527622.376058][15824:15829] CHIP:DMG: }, |
| [1650527622.376202][15824:15829] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1650527622.376278][15824:15829] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01" |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 12" |
| verification: | |
| Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is set in step 12 |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read WindowStatus attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On DUT_CR1 , read WindowStatus |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| Verify TH_CE successfully reads windowstatus |
| |
| [1661482777.283822][6453:6453] CHIP:DMG: ReportDataMessage = |
| [1661482777.283855][6453:6453] CHIP:DMG: { |
| [1661482777.283882][6453:6453] CHIP:DMG: AttributeReportIBs = |
| [1661482777.283921][6453:6453] CHIP:DMG: [ |
| [1661482777.283951][6453:6453] CHIP:DMG: AttributeReportIB = |
| [1661482777.283995][6453:6453] CHIP:DMG: { |
| [1661482777.284036][6453:6453] CHIP:DMG: AttributeDataIB = |
| [1661482777.284080][6453:6453] CHIP:DMG: { |
| [1661482777.284122][6453:6453] CHIP:DMG: DataVersion = 0xd3f3fc78, |
| [1661482777.284289][6453:6453] CHIP:DMG: AttributePathIB = |
| [1661482777.284337][6453:6453] CHIP:DMG: { |
| [1661482777.284385][6453:6453] CHIP:DMG: Endpoint = 0x0, |
| [1661482777.284430][6453:6453] CHIP:DMG: Cluster = 0x3c, |
| [1661482777.284479][6453:6453] CHIP:DMG: Attribute = 0x0000_0000, |
| [1661482777.284522][6453:6453] CHIP:DMG: } |
| [1661482777.284567][6453:6453] CHIP:DMG: |
| [1661482777.284612][6453:6453] CHIP:DMG: Data = 0, |
| [1661482777.284655][6453:6453] CHIP:DMG: }, |
| [1661482777.284699][6453:6453] CHIP:DMG: |
| [1661482777.284733][6453:6453] CHIP:DMG: }, |
| [1661482777.284773][6453:6453] CHIP:DMG: |
| [1661482777.284803][6453:6453] CHIP:DMG: ], |
| [1661482777.284841][6453:6453] CHIP:DMG: |
| [1661482777.284872][6453:6453] CHIP:DMG: SuppressResponse = true, |
| [1661482777.284905][6453:6453] CHIP:DMG: InteractionModelRevision = 1 |
| [1661482777.284934][6453:6453] CHIP:DMG: } |
| [1661482777.284962][6453:6453] CHIP:DMG: |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminFabricIndex attribute" |
| PICS: CADMIN.C.A0001 |
| verification: | |
| On DUT_CR1 , read AdminFabricIndex |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| ./chip-tool administratorcommissioning read admin-fabric-index 1 0 |
| |
| Verify on TH_CE(all-clusters-app) successfully reads the AdminFabricIndex |
| |
| [1661484456.069189][6930:6930] CHIP:DMG: ReportDataMessage = |
| [1661484456.069213][6930:6930] CHIP:DMG: { |
| [1661484456.069232][6930:6930] CHIP:DMG: AttributeReportIBs = |
| [1661484456.069259][6930:6930] CHIP:DMG: [ |
| [1661484456.069280][6930:6930] CHIP:DMG: AttributeReportIB = |
| [1661484456.069314][6930:6930] CHIP:DMG: { |
| [1661484456.069339][6930:6930] CHIP:DMG: AttributeDataIB = |
| [1661484456.069366][6930:6930] CHIP:DMG: { |
| [1661484456.069395][6930:6930] CHIP:DMG: DataVersion = 0x5698b43f, |
| [1661484456.069427][6930:6930] CHIP:DMG: AttributePathIB = |
| [1661484456.069459][6930:6930] CHIP:DMG: { |
| [1661484456.069492][6930:6930] CHIP:DMG: Endpoint = 0x0, |
| [1661484456.069524][6930:6930] CHIP:DMG: Cluster = 0x3c, |
| [1661484456.069629][6930:6930] CHIP:DMG: Attribute = 0x0000_0001, |
| [1661484456.069661][6930:6930] CHIP:DMG: } |
| [1661484456.069695][6930:6930] CHIP:DMG: |
| [1661484456.069729][6930:6930] CHIP:DMG: Data = NULL |
| [1661484456.069757][6930:6930] CHIP:DMG: }, |
| [1661484456.069790][6930:6930] CHIP:DMG: |
| [1661484456.069815][6930:6930] CHIP:DMG: }, |
| [1661484456.069844][6930:6930] CHIP:DMG: |
| [1661484456.069865][6930:6930] CHIP:DMG: ], |
| [1661484456.069892][6930:6930] CHIP:DMG: |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminVendorId attribute" |
| PICS: CADMIN.C.A0002 |
| verification: | |
| On DUT_CR1 , read AdminVendorId |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| Verify on TH_CE(all-clusters-app) successfully reads the AdminVendorId |
| |
| ./chip-tool administratorcommissioning read admin-vendor-id 1 0 |
| |
| [1661484515.721772][6930:6930] CHIP:DMG: ReportDataMessage = |
| [1661484515.721809][6930:6930] CHIP:DMG: { |
| [1661484515.721838][6930:6930] CHIP:DMG: AttributeReportIBs = |
| [1661484515.721880][6930:6930] CHIP:DMG: [ |
| [1661484515.721913][6930:6930] CHIP:DMG: AttributeReportIB = |
| [1661484515.721965][6930:6930] CHIP:DMG: { |
| [1661484515.722006][6930:6930] CHIP:DMG: AttributeDataIB = |
| [1661484515.722051][6930:6930] CHIP:DMG: { |
| [1661484515.722100][6930:6930] CHIP:DMG: DataVersion = 0x5698b43f, |
| [1661484515.722146][6930:6930] CHIP:DMG: AttributePathIB = |
| [1661484515.722191][6930:6930] CHIP:DMG: { |
| [1661484515.722242][6930:6930] CHIP:DMG: Endpoint = 0x0, |
| [1661484515.722292][6930:6930] CHIP:DMG: Cluster = 0x3c, |
| [1661484515.722344][6930:6930] CHIP:DMG: Attribute = 0x0000_0002, |
| [1661484515.722394][6930:6930] CHIP:DMG: } |
| [1661484515.722443][6930:6930] CHIP:DMG: |
| [1661484515.722494][6930:6930] CHIP:DMG: Data = NULL |
| [1661484515.722542][6930:6930] CHIP:DMG: }, |
| [1661484515.722589][6930:6930] CHIP:DMG: |
| [1661484515.722626][6930:6930] CHIP:DMG: }, |
| [1661484515.722673][6930:6930] CHIP:DMG: |
| [1661484515.722705][6930:6930] CHIP:DMG: ], |
| [1661484515.722746][6930:6930] CHIP:DMG: |
| disabled: true |
