| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.2. [TC-CADMIN-1.2] Administrator Behavior using BCM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| - CADMIN.C.C01.Tx |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| For DUT as comissioner test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "TH_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| "1. Provision the TH_CE (all-cluster-app) device using TH_CR1 (chip-tool ) on the raspi" |
| disabled: true |
| |
| - label: |
| "TH_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM |
| (Basic Commissioning Method)" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Commissioning window is opened in TH_CE(all-clusters-app) Log |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: "TH_CR1 sends command to TH_CE to read the list of Fabrics" |
| PICS: OPCREDS.C.A0001 |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On TH_CR1 send the below command |
| |
| ./chip-tool operationalcredentials read fabrics 1 0 --fabric-filtered 0 |
| |
| |
| Verify TH_CE reports 1 entry in fabrics list |
| |
| |
| [1661486369.837260][7071:7071] CHIP:DMG: AttributeReportIB = |
| [1661486369.837292][7071:7071] CHIP:DMG: { |
| [1661486369.837317][7071:7071] CHIP:DMG: AttributeDataIB = |
| [1661486369.837343][7071:7071] CHIP:DMG: { |
| [1661486369.837371][7071:7071] CHIP:DMG: DataVersion = 0x8d915768, |
| [1661486369.837398][7071:7071] CHIP:DMG: AttributePathIB = |
| [1661486369.837426][7071:7071] CHIP:DMG: { |
| [1661486369.837455][7071:7071] CHIP:DMG: Endpoint = 0x0, |
| [1661486369.837485][7071:7071] CHIP:DMG: Cluster = 0x3e, |
| [1661486369.837515][7071:7071] CHIP:DMG: Attribute = 0x0000_0001, |
| [1661486369.837544][7071:7071] CHIP:DMG: ListIndex = Null, |
| [1661486369.837572][7071:7071] CHIP:DMG: } |
| [1661486369.837601][7071:7071] CHIP:DMG: |
| [1661486369.837629][7071:7071] CHIP:DMG: Data = |
| [1661486369.837656][7071:7071] CHIP:DMG: { |
| [1661486369.837685][7071:7071] CHIP:DMG: 0x1 = [ |
| [1661486369.837731][7071:7071] CHIP:DMG: 0x4, 0xb5, 0xc1, 0xfd, 0xdd, 0x6a, 0xdd, 0xc3, 0xa1, 0x3d, 0xee, 0x39, 0xa2, 0xe, 0x66, 0x7, 0xa2, 0x3a, 0x6d, 0x4a, 0x86, 0x57, 0x36, 0xf7, 0x1f, 0x20, 0x7c, 0x9d, 0xe8, 0x8, 0xa, 0xd5, 0xf2, 0x9c, 0x9d, 0x1b, 0x14, 0x5f, 0xbc, 0x60, 0xb9, 0xe7, 0xee, 0xb3, 0x4c, 0x2, 0xf4, 0x7b, 0x21, 0xdb, 0x74, 0x4e, 0xb1, 0x65, 0x22, 0xd3, 0xe0, 0x32, 0xbd, 0xbe, 0xde, 0x43, 0xfe, 0x26, 0xd6, |
| [1661486369.837769][7071:7071] CHIP:DMG: ] (65 bytes) |
| [1661486369.837799][7071:7071] CHIP:DMG: 0x2 = 65521, |
| [1661486369.837830][7071:7071] CHIP:DMG: 0x3 = 1, |
| [1661486369.837861][7071:7071] CHIP:DMG: 0x4 = 1, |
| [1661486369.837893][7071:7071] CHIP:DMG: 0x5 = "" (0 chars), |
| [1661486369.837923][7071:7071] CHIP:DMG: 0xfe = 1, |
| [1661486369.837953][7071:7071] CHIP:DMG: }, |
| [1661486369.837979][7071:7071] CHIP:DMG: }, |
| [1661486369.838010][7071:7071] CHIP:DMG: |
| [1661486369.838034][7071:7071] CHIP:DMG: }, |
| [1661486369.838064][7071:7071] CHIP:DMG: |
| [1661486369.838084][7071:7071] CHIP:DMG: ], |
| [1661486369.838116][7071:7071] CHIP:DMG: |
| disabled: true |
| |
| - label: "DUT_CR2 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool pairing onnetwork 2 20202021 --commissioner-name beta |
| |
| Verify TH_CE logs for |
| Commissioning completed successfully |
| disabled: true |
| |
| - label: "Verify TH_CE is now discoverable over DNS-SD with two SRV Records" |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| On the raspi , Verify if the TH_CE(All-cluster-app) is broadcasting |
| |
| On TH_CR1 send the below command |
| |
| ubuntu@ubuntu:~/may10_cntrl2/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matter._tcp |
| + eth0 IPv6 E0AF53B23E580769-0000000000000002 _matter._tcp local |
| + eth0 IPv6 7FF84D214A19B581-0000000000000001 _matter._tcp local |
| = eth0 IPv6 E0AF53B23E580769-0000000000000002 _matter._tcp local |
| hostname = [E45F010F3BAF0000.local] |
| address = [fe80::e65f:1ff:fe0f:3baf] |
| port = [5540] |
| txt = ["T=1" "CRA=300" "CRI=5000"] |
| = eth0 IPv6 7FF84D214A19B581-0000000000000001 _matter._tcp local |
| hostname = [E45F010F3BAF0000.local] |
| address = [fe80::e65f:1ff:fe0f:3baf] |
| port = [5540] |
| txt = ["T=1" "CRA=300" "CRI=5000"] |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to write and read the Basic |
| Information Clusters NodeLabel mandatory attribute" |
| PICS: BINFO.C.A0005 |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool basic write node-label te5new 2 0 --commissioner-name beta |
| |
| On TH2(all-clusters-app) Log |
| |
| Verify Write request on TH_CE(all-clusters-app) Log |
| |
| [1660894021.901330][2871:2871] CHIP:EM: Handling via exchange: 9616r, Delegate: 0xaaaada21ffc0 |
| [1660894021.901426][2871:2871] CHIP:IM: Received Write request |
| [1660894021.901484][2871:2871] CHIP:DMG: IM WH moving to [Initialized] |
| [1660894021.901613][2871:2871] CHIP:DMG: WriteRequestMessage = |
| [1660894021.901676][2871:2871] CHIP:DMG: { |
| [1660894021.901735][2871:2871] CHIP:DMG: suppressResponse = false, |
| [1660894021.901802][2871:2871] CHIP:DMG: timedRequest = false, |
| [1660894021.901864][2871:2871] CHIP:DMG: AttributeDataIBs = |
| [1660894021.901940][2871:2871] CHIP:DMG: [ |
| [1660894021.902001][2871:2871] CHIP:DMG: AttributeDataIB = |
| [1660894021.902071][2871:2871] CHIP:DMG: { |
| [1660894021.902136][2871:2871] CHIP:DMG: AttributePathIB = |
| [1660894021.902219][2871:2871] CHIP:DMG: { |
| [1660894021.902302][2871:2871] CHIP:DMG: Endpoint = 0x0, |
| |
| |
| ./chip-tool basic read node-label 2 0 --commissioner-name beta |
| |
| Verify read request on TH_CE(all-clusters-app) Log |
| |
| |
| [1660894142.828718][2871:2871] CHIP:EM: Handling via exchange: 62454r, Delegate: 0xaaaada21ffc0 |
| [1660894142.828834][2871:2871] CHIP:IM: Received Read request |
| [1660894142.829023][2871:2871] CHIP:DMG: ReadRequestMessage = |
| [1660894142.829097][2871:2871] CHIP:DMG: { |
| [1660894142.829153][2871:2871] CHIP:DMG: AttributePathIBs = |
| [1660894142.829235][2871:2871] CHIP:DMG: [ |
| [1660894142.829306][2871:2871] CHIP:DMG: AttributePathIB = |
| [1660894142.829376][2871:2871] CHIP:DMG: { |
| [1660894142.829449][2871:2871] CHIP:DMG: Endpoint = 0x0, |
| [1660894142.829532][2871:2871] CHIP:DMG: Cluster = 0x28, |
| [1660894142.829627][2871:2871] CHIP:DMG: Attribute = 0x0000_0005, |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to read the list of Fabrics on TH_CE" |
| PICS: OPCREDS.C.A0001 |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool operationalcredentials read fabrics 2 0 --fabric-filtered 0 --commissioner-name beta |
| |
| Verify 2 entries in TH_CE log |
| |
| |
| [1661481567.477399][6453:6453] CHIP:DMG: AttributeReportIB = |
| [1661481567.477428][6453:6453] CHIP:DMG: { |
| [1661481567.477450][6453:6453] CHIP:DMG: AttributeDataIB = |
| [1661481567.477475][6453:6453] CHIP:DMG: { |
| [1661481567.477503][6453:6453] CHIP:DMG: DataVersion = 0x482f8cf0, |
| [1661481567.477530][6453:6453] CHIP:DMG: AttributePathIB = |
| [1661481567.477558][6453:6453] CHIP:DMG: { |
| [1661481567.477586][6453:6453] CHIP:DMG: Endpoint = 0x0, |
| [1661481567.477616][6453:6453] CHIP:DMG: Cluster = 0x3e, |
| [1661481567.477649][6453:6453] CHIP:DMG: Attribute = 0x0000_0001, |
| [1661481567.477678][6453:6453] CHIP:DMG: ListIndex = Null, |
| [1661481567.477706][6453:6453] CHIP:DMG: } |
| [1661481567.477735][6453:6453] CHIP:DMG: |
| [1661481567.477762][6453:6453] CHIP:DMG: Data = |
| [1661481567.477791][6453:6453] CHIP:DMG: { |
| [1661481567.477823][6453:6453] CHIP:DMG: 0x1 = [ |
| [1661481567.477871][6453:6453] CHIP:DMG: 0x4, 0xb5, 0xc1, 0xfd, 0xdd, 0x6a, 0xdd, 0xc3, 0xa1, 0x3d, 0xee, 0x39, 0xa2, 0xe, 0x66, 0x7, 0xa2, 0x3a, 0x6d, 0x4a, 0x86, 0x57, 0x36, 0xf7, 0x1f, 0x20, 0x7c, 0x9d, 0xe8, 0x8, 0xa, 0xd5, 0xf2, 0x9c, 0x9d, 0x1b, 0x14, 0x5f, 0xbc, 0x60, 0xb9, 0xe7, 0xee, 0xb3, 0x4c, 0x2, 0xf4, 0x7b, 0x21, 0xdb, 0x74, 0x4e, 0xb1, 0x65, 0x22, 0xd3, 0xe0, 0x32, 0xbd, 0xbe, 0xde, 0x43, 0xfe, 0x26, 0xd6, |
| [1661481567.477909][6453:6453] CHIP:DMG: ] (65 bytes) |
| [1661481567.477942][6453:6453] CHIP:DMG: 0x2 = 65521, |
| [1661481567.477974][6453:6453] CHIP:DMG: 0x3 = 1, |
| [1661481567.478007][6453:6453] CHIP:DMG: 0x4 = 1, |
| [1661481567.478096][6453:6453] CHIP:DMG: 0x5 = "" (0 chars), |
| [1661481567.478129][6453:6453] CHIP:DMG: 0xfe = 1, |
| [1661481567.478160][6453:6453] CHIP:DMG: }, |
| [1661481567.478187][6453:6453] CHIP:DMG: }, |
| [1661481567.478217][6453:6453] CHIP:DMG: |
| [1661481567.478241][6453:6453] CHIP:DMG: }, |
| [1661481567.478278][6453:6453] CHIP:DMG: |
| [1661481567.478298][6453:6453] CHIP:DMG: AttributeReportIB = |
| [1661481567.478330][6453:6453] CHIP:DMG: { |
| [1661481567.478354][6453:6453] CHIP:DMG: AttributeDataIB = |
| [1661481567.478380][6453:6453] CHIP:DMG: { |
| [1661481567.478406][6453:6453] CHIP:DMG: DataVersion = 0x482f8cf0, |
| [1661481567.478433][6453:6453] CHIP:DMG: AttributePathIB = |
| [1661481567.478461][6453:6453] CHIP:DMG: { |
| [1661481567.478489][6453:6453] CHIP:DMG: Endpoint = 0x0, |
| [1661481567.478522][6453:6453] CHIP:DMG: Cluster = 0x3e, |
| [1661481567.478554][6453:6453] CHIP:DMG: Attribute = 0x0000_0001, |
| [1661481567.478584][6453:6453] CHIP:DMG: ListIndex = Null, |
| [1661481567.478612][6453:6453] CHIP:DMG: } |
| [1661481567.478643][6453:6453] CHIP:DMG: |
| [1661481567.478672][6453:6453] CHIP:DMG: Data = |
| [1661481567.478702][6453:6453] CHIP:DMG: { |
| [1661481567.478732][6453:6453] CHIP:DMG: 0x1 = [ |
| [1661481567.478777][6453:6453] CHIP:DMG: 0x4, 0x7b, 0x5b, 0x9a, 0x2a, 0xd1, 0x4e, 0x1e, 0x8d, 0xf4, 0xca, 0xea, 0xde, 0x1c, 0xbe, 0xa7, 0xf6, 0xd4, 0xa1, 0xe8, 0xf0, 0x20, 0x9f, 0x6c, 0x38, 0x30, 0x31, 0x88, 0xb5, 0x89, 0x69, 0xd4, 0x7, 0x17, 0x16, 0x85, 0x25, 0x55, 0x8f, 0x5b, 0xed, 0x58, 0x68, 0x27, 0xde, 0x5e, 0xf6, 0xf9, 0xf8, 0x99, 0x54, 0x92, 0x8e, 0x33, 0xa6, 0xf4, 0xb0, 0x5a, 0xc1, 0xa6, 0x1a, 0xf5, 0x2, 0xb4, 0x4f, |
| [1661481567.478815][6453:6453] CHIP:DMG: ] (65 bytes) |
| [1661481567.478848][6453:6453] CHIP:DMG: 0x2 = 65521, |
| [1661481567.478877][6453:6453] CHIP:DMG: 0x3 = 2, |
| [1661481567.478907][6453:6453] CHIP:DMG: 0x4 = 1, |
| [1661481567.478938][6453:6453] CHIP:DMG: 0x5 = "" (0 chars), |
| [1661481567.478968][6453:6453] CHIP:DMG: 0xfe = 2, |
| [1661481567.478999][6453:6453] CHIP:DMG: }, |
| [1661481567.479026][6453:6453] CHIP:DMG: }, |
| [1661481567.479056][6453:6453] CHIP:DMG: |
| [1661481567.479079][6453:6453] CHIP:DMG: }, |
| [1661481567.479107][6453:6453] CHIP:DMG: |
| disabled: true |
| |
| - label: |
| "TH_CR1 sends command to TH_CE to write and read the Basic Information |
| Clusters NodeLabel mandatory attribute" |
| PICS: BINFO.C.A0005 |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| |
| ./chip-tool basic write node-label te8 1 0 |
| |
| Verify the Write request On TH_CE(all-clusters-app) Log |
| |
| |
| [1660894538.804578][2871:2871] CHIP:EM: Handling via exchange: 64932r, Delegate: 0xaaaada21ffc0 |
| [1660894538.804677][2871:2871] CHIP:IM: Received Write request |
| [1660894538.804737][2871:2871] CHIP:DMG: IM WH moving to [Initialized] |
| [1660894538.804867][2871:2871] CHIP:DMG: WriteRequestMessage = |
| [1660894538.804933][2871:2871] CHIP:DMG: { |
| [1660894538.804993][2871:2871] CHIP:DMG: suppressResponse = false, |
| [1660894538.805059][2871:2871] CHIP:DMG: timedRequest = false, |
| [1660894538.805120][2871:2871] CHIP:DMG: AttributeDataIBs = |
| [1660894538.805196][2871:2871] CHIP:DMG: [ |
| |
| |
| ./chip-tool basic read node-label 1 0 |
| |
| Verify the Read request On TH_CE(all-clusters-app) Log |
| |
| [1660894686.511690][2871:2871] CHIP:EM: Received message of type 0x2 with protocolId (0, 1) and MessageCounter:155836021 on exchange 25703r |
| [1660894686.511817][2871:2871] CHIP:EM: Handling via exchange: 25703r, Delegate: 0xaaaada21ffc0 |
| [1660894686.511920][2871:2871] CHIP:IM: Received Read request |
| [1660894686.512190][2871:2871] CHIP:DMG: ReadRequestMessage = |
| [1660894686.512259][2871:2871] CHIP:DMG: { |
| [1660894686.512314][2871:2871] CHIP:DMG: AttributePathIBs = |
| [1660894686.512380][2871:2871] CHIP:DMG: [ |
| [1660894686.512441][2871:2871] CHIP:DMG: AttributePathIB = |
| [1660894686.512526][2871:2871] CHIP:DMG: { |
| [1660894686.512599][2871:2871] CHIP:DMG: Endpoint = 0x0, |
| [1660894686.512683][2871:2871] CHIP:DMG: Cluster = 0x28, |
| [1660894686.512772][2871:2871] CHIP:DMG: Attribute = 0x0000_0005, |
| [1660894142.829703][2871:2871] CHIP:DMG: } |
| [1660894142.829777][2871:2871] CHIP:DMG: |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to read, write and then read the Basic |
| Information Clusters NodeLabel mandatory attribute" |
| PICS: BINFO.C.A0005 |
| verification: | |
| On DUT_CR2 read, write attribute and then read attribute to and from TH_CE |
| |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| |
| ./chip-tool basic read node-label 2 0 --commissioner-name beta |
| |
| Verify the Read request On TH_CE(all-clusters-app) Log |
| |
| [1660902253.379018][3045:3045] CHIP:EM: Handling via exchange: 3197r, Delegate: 0xaaaaadbeffc0 |
| [1660902253.379122][3045:3045] CHIP:IM: Received Read request |
| [1660902253.379306][3045:3045] CHIP:DMG: ReadRequestMessage = |
| [1660902253.379373][3045:3045] CHIP:DMG: { |
| [1660902253.379430][3045:3045] CHIP:DMG: AttributePathIBs = |
| [1660902253.379496][3045:3045] CHIP:DMG: [ |
| [1660902253.379557][3045:3045] CHIP:DMG: AttributePathIB = |
| [1660902253.379634][3045:3045] CHIP:DMG: { |
| [1660902253.379703][3045:3045] CHIP:DMG: Endpoint = 0x0, |
| [1660902253.379782][3045:3045] CHIP:DMG: Cluster = 0x28, |
| [1660902253.379871][3045:3045] CHIP:DMG: Attribute = 0x0000_0005, |
| [1660902253.379935][3045:3045] CHIP:DMG: } |
| [1660902253.380141][3045:3045] CHIP:DMG: |
| [1660902253.380208][3045:3045] CHIP:DMG: ], |
| |
| |
| |
| ./chip-tool basic write node-label te5new 2 0 --commissioner-name beta |
| |
| |
| Verify the Write request On TH_CE(all-clusters-app) Log |
| |
| [1660902144.913634][3045:3045] CHIP:EM: Handling via exchange: 22257r, Delegate: 0xaaaaadbeffc0 |
| [1660902144.913728][3045:3045] CHIP:IM: Received Write request |
| [1660902144.913785][3045:3045] CHIP:DMG: IM WH moving to [Initialized] |
| [1660902144.913912][3045:3045] CHIP:DMG: WriteRequestMessage = |
| [1660902144.913977][3045:3045] CHIP:DMG: { |
| [1660902144.914038][3045:3045] CHIP:DMG: suppressResponse = false, |
| [1660902144.914106][3045:3045] CHIP:DMG: timedRequest = false, |
| [1660902144.914168][3045:3045] CHIP:DMG: AttributeDataIBs = |
| [1660902144.914244][3045:3045] CHIP:DMG: [ |
| [1660902144.914305][3045:3045] CHIP:DMG: AttributeDataIB = |
| [1660902144.914375][3045:3045] CHIP:DMG: { |
| [1660902144.914440][3045:3045] CHIP:DMG: AttributePathIB = |
| [1660902144.914522][3045:3045] CHIP:DMG: { |
| [1660902144.914602][3045:3045] CHIP:DMG: Endpoint = 0x0, |
| [1660902144.914691][3045:3045] CHIP:DMG: Cluster = 0x28, |
| [1660902144.914940][3045:3045] CHIP:DMG: Attribute = 0x0000_0005, |
| [1660902144.915025][3045:3045] CHIP:DMG: } |
| [1660902144.915109][3045:3045] CHIP:DMG: |
| [1660902144.915208][3045:3045] CHIP:DMG: Data = "te5new" (6 chars), |
| [1660902144.915292][3045:3045] CHIP:DMG: }, |
| [1660902144.915374][3045:3045] CHIP:DMG: |
| |
| |
| |
| ./chip-tool basic read node-label 2 0 --commissioner-name beta |
| |
| Verify the Read request On TH_CE(all-clusters-app) Log |
| |
| [1660902253.379018][3045:3045] CHIP:EM: Handling via exchange: 3197r, Delegate: 0xaaaaadbeffc0 |
| [1660902253.379122][3045:3045] CHIP:IM: Received Read request |
| [1660902253.379306][3045:3045] CHIP:DMG: ReadRequestMessage = |
| [1660902253.379373][3045:3045] CHIP:DMG: { |
| [1660902253.379430][3045:3045] CHIP:DMG: AttributePathIBs = |
| [1660902253.379496][3045:3045] CHIP:DMG: [ |
| [1660902253.379557][3045:3045] CHIP:DMG: AttributePathIB = |
| [1660902253.379634][3045:3045] CHIP:DMG: { |
| [1660902253.379703][3045:3045] CHIP:DMG: Endpoint = 0x0, |
| [1660902253.379782][3045:3045] CHIP:DMG: Cluster = 0x28, |
| [1660902253.379871][3045:3045] CHIP:DMG: Attribute = 0x0000_0005, |
| [1660902253.379935][3045:3045] CHIP:DMG: } |
| [1660902253.380141][3045:3045] CHIP:DMG: |
| [1660902253.380208][3045:3045] CHIP:DMG: ], |
| disabled: true |
| |
| - label: "Turn off TH_CR1" |
| verification: | |
| No need to do anything as chip-tool process exits after each command |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM |
| (Basic Commissioning Method)" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta |
| |
| Verify the Commissioning window is opened in TH_CE(all-clusters-app) Log |
| |
| [1660901022.112296][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660901022.112389][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660901022.112474][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to revoke the commissioning window |
| using the Revoke Commissioning command" |
| PICS: CADMIN.C.C02.Tx |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool administratorcommissioning revoke-commissioning 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta |
| |
| Verify the Commissioning window is closed in TH_CE(all-clusters-app) Log |
| [1661485834.635244][6993:6993] CHIP:DIS: mDNS service published: _matter._tcp |
| [1661485834.635293][6993:6993] CHIP:ZCL: Commissioning window is now closed |
| [1661485834.635328][6993:6993] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "TH_CR3 attempts to execute a PASE to starts a commissioning process |
| with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On TH_CR3 send the below command |
| |
| ./chip-tool pairing onnetwork 3 20202021 --commissioner-name gamma |
| |
| verify you got the following message in the TH_CR3(chip-tool) log |
| |
| CHIP:SC: PASESession timed out while waiting for a response from the peer. Expected message type was 33 |
| CHIP:TOO: Secure Pairing Failed |
| CHIP:TOO: Pairing Failure: ../../third_party/connectedhomeip/src/protocols/secure_channel/PASESession.cpp:324: CHIP Error 0x00000032: Timeout |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to write and read the Basic |
| Information Clusters NodeLabel mandatory attribute" |
| PICS: BINFO.C.A0005 |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool basic write node-label te5new 2 0 --commissioner-name beta |
| |
| Verify the Write request On TH_CE(all-clusters-app) Log |
| |
| [1660902144.913634][3045:3045] CHIP:EM: Handling via exchange: 22257r, Delegate: 0xaaaaadbeffc0 |
| [1660902144.913728][3045:3045] CHIP:IM: Received Write request |
| [1660902144.913785][3045:3045] CHIP:DMG: IM WH moving to [Initialized] |
| [1660902144.913912][3045:3045] CHIP:DMG: WriteRequestMessage = |
| [1660902144.913977][3045:3045] CHIP:DMG: { |
| [1660902144.914038][3045:3045] CHIP:DMG: suppressResponse = false, |
| [1660902144.914106][3045:3045] CHIP:DMG: timedRequest = false, |
| [1660902144.914168][3045:3045] CHIP:DMG: AttributeDataIBs = |
| |
| [1660902144.915374][3045:3045] CHIP:DMG: |
| |
| ./chip-tool basic read node-label 2 0 --commissioner-name beta |
| |
| Verify the Read request On TH_CE(all-clusters-app) Log |
| |
| [1660902253.379018][3045:3045] CHIP:EM: Handling via exchange: 3197r, Delegate: 0xaaaaadbeffc0 |
| [1660902253.379122][3045:3045] CHIP:IM: Received Read request |
| [1660902253.379306][3045:3045] CHIP:DMG: ReadRequestMessage = |
| [1660902253.379373][3045:3045] CHIP:DMG: { |
| [1660902253.379430][3045:3045] CHIP:DMG: AttributePathIBs = |
| [1660902253.379496][3045:3045] CHIP:DMG: [ |
| [1660902253.379557][3045:3045] CHIP:DMG: AttributePathIB = |
| [1660902253.379634][3045:3045] CHIP:DMG: { |
| [1660902253.379703][3045:3045] CHIP:DMG: Endpoint = 0x0, |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to open a commissioning window using |
| BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 180 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta |
| |
| Verify the Commissioning window is opened in TH_CE(all-clusters-app) Log |
| |
| [1660902413.357922][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660902413.358025][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660902413.358116][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "Wait for commissioning window that was opened in step 13 to timeout" |
| verification: | |
| Wait for the timeout of commissioning window in the above step |
| disabled: true |
| |
| - label: |
| "DUT_CR2 sends command to TH_CE to open a commissioning window using |
| BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On DUT_CR2 send the below command |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 --commissioner-name beta |
| |
| Verify the Commissioning window is opened in TH_CE(all-clusters-app) Log |
| |
| [1660902623.744448][3045:3045] CHIP:DIS: mDNS service published: _matterc._udp |
| [1660902623.744550][3045:3045] CHIP:ZCL: Commissioning window is now open |
| [1660902623.744634][3045:3045] CHIP:DMG: Command handler moving to [ Preparing] |
| disabled: true |
| |
| - label: |
| "TH_CR1 starts a commissioning process with TH_CE before the timeout |
| from step 15" |
| PICS: CADMIN.C |
| verification: | |
| Below are the example command for using single RPI as multiple controller. Vendor should have the provision to use the equivalent command in their DUT or use multiple commissioners/controllers |
| |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify the OperationalCert error 9 in TH_CE(all-clusters-app) Log |
| |
| [1660902716.613196][3045:3045] CHIP:DMG: Command handler moving to [AddedComma] |
| [1660902716.613274][3045:3045] CHIP:ZCL: OpCreds: Failed AddNOC request (err=../../examples/all-clusters-app/linux/third_party/connectedhomeip/src/credentials/FabricTable.cpp:1692: CHIP Error 0x0000007E: Trying to add a NOC for a fabric that already exists) with OperationalCert error 9 |
| [1660902716.613394][3045:3045] CHIP:DMG: Decreasing reference count for CommandHandler, remaining 0 |
| [1660902716.613497][3045:3045] CHIP:EM: Piggybacking Ack for MessageCounter:176866087 on exchange: 56605r |
| disabled: true |
