| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 24.1.4. [TC-CADMIN-1.4] Node Behavior using BCM [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| - CADMIN.S.F00 |
| |
| config: |
| nodeId: 0x12344321 |
| timeout: 300 |
| nodeId2: |
| type: node_id |
| defaultValue: 0xCAFE |
| endpoint: 0 |
| discriminator: |
| type: int16u |
| defaultValue: 3840 |
| payload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" |
| |
| tests: |
| - label: "Precondition: Reset Devices to factory defaults" |
| PICS: PICS_SDK_CI_ONLY |
| cluster: "SystemCommands" |
| command: "FactoryReset" |
| |
| - label: "Precondition: Reset Devices to factory defaults" |
| verification: | |
| Not implemented in YAML |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP |
| arguments: |
| values: |
| - name: "message" |
| value: "Factory Reset the DUT and enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "TH_CR1 opens a commissioning window on DUT_CE using BCM" |
| cluster: "AdministratorCommissioning" |
| command: "OpenBasicCommissioningWindow" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 180 |
| - name: "discriminator" |
| value: discriminator |
| |
| #Check for DNS-SD advertisement CM is not possible in YAML |
| - label: "Verify that the DNS-SD advertisement shows CM=1" |
| verification: | |
| On TH_CR1 send the below command |
| |
| ubuntu@ubuntu:~/may16_cntrl/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matterc._udp |
| + eth0 IPv6 B2822245F1F43570 _matterc._udp local |
| = eth0 IPv6 B2822245F1F43570 _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=1" "D=3840" "T=1" "SAI=300" "SII=5000" "VP=65521+32769"] |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP |
| arguments: |
| values: |
| - name: "message" |
| value: "enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH_CR1 writes the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| command: "writeAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| arguments: |
| value: "chiptest" |
| |
| - label: |
| "TH_CR1 reads the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| command: "readAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| response: |
| constraints: |
| type: char_string |
| maxLength: 32 |
| |
| - label: "TH_CR2 starts a commissioning process with DUT_CE" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: payload |
| |
| - label: "DUT_CE is commissioned by TH_CR2 on Fabric ID2 " |
| identity: "beta" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| |
| #Check for DNS-SD advertisement is not possible in YAML |
| - label: |
| "Verify DUT_CE is now discoverable over DNS-SD with two SRV Records" |
| verification: | |
| On TH_CR2 send the below command |
| |
| Verify if the DUT_CE is broadcasting using |
| |
| ubuntu@ubuntu:~/may16_cntrl2/connectedhomeip/examples/chip-tool/out/debug$ avahi-browse -rt _matter._tcp |
| + eth0 IPv6 C8A60CCA27F33379-0000000000000002 _matter._tcp local |
| + eth0 IPv6 3C26C93CF201458F-0000000000000001 _matter._tcp local |
| = eth0 IPv6 C8A60CCA27F33379-0000000000000002 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| = eth0 IPv6 3C26C93CF201458F-0000000000000001 _matter._tcp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["T=1" "SAI=300" "SII=5000"] |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP |
| arguments: |
| values: |
| - name: "message" |
| value: "enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "TH_CR1 reads the list of Fabrics on DUT_CE" |
| command: "readAttribute" |
| cluster: "Operational Credentials" |
| PICS: OPCREDS.S.A0001 |
| attribute: "Fabrics" |
| fabricFiltered: false |
| response: |
| value: [{ Label: "", nodeId: nodeId }, { Label: "", nodeId: nodeId2 }] |
| constraints: |
| type: list |
| |
| - label: "TH_CR2 reads the list of Fabrics on DUT_CE" |
| identity: "beta" |
| command: "readAttribute" |
| cluster: "Operational Credentials" |
| attribute: "Fabrics" |
| PICS: OPCREDS.S.A0001 |
| fabricFiltered: false |
| response: |
| value: [{ Label: "", nodeId: nodeId }, { Label: "", nodeId: nodeId2 }] |
| constraints: |
| type: list |
| |
| - label: |
| "TH_CR1 writes the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| command: "writeAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| arguments: |
| value: "chiptest" |
| |
| - label: |
| "TH_CR1 reads the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| command: "readAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| response: |
| value: "chiptest" |
| constraints: |
| type: char_string |
| maxLength: 32 |
| |
| - label: |
| "TH_CR2 writes the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| identity: "beta" |
| command: "writeAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| arguments: |
| value: "chiptest" |
| |
| - label: |
| "TH_CR2 reads the Basic Information Clusters NodeLabel mandatory |
| attribute of DUT_CE" |
| identity: "beta" |
| command: "readAttribute" |
| cluster: "Basic" |
| attribute: "NodeLabel" |
| PICS: BINFO.S.A0005 |
| response: |
| value: "chiptest" |
| constraints: |
| type: char_string |
| maxLength: 32 |
| |
| - label: "TH_CR2 opens a commissioning window on DUT_CE using BCM" |
| cluster: "AdministratorCommissioning" |
| command: "OpenBasicCommissioningWindow" |
| identity: "beta" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 180 |
| - name: "discriminator" |
| value: discriminator |
| |
| - label: "Wait for the commissioning window in step 13 to timeout" |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: 180000 |
| |
| - label: |
| "TH_CR2 reads the window status to verify the DUT_CE window is closed" |
| cluster: "AdministratorCommissioning" |
| PICS: CADMIN.S.A0000 |
| command: "readAttribute" |
| attribute: "WindowStatus" |
| response: |
| value: 0 |
| |
| - label: "TH_CR2 opens a commissioning window on DUT_CE using BCM" |
| cluster: "AdministratorCommissioning" |
| command: "OpenBasicCommissioningWindow" |
| identity: "beta" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: 180 |
| - name: "discriminator" |
| value: discriminator |
| |
| - label: |
| "TH_CR1 starts a commissioning process with DUT_CE before the timeout |
| from step 12" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| - name: "payload" |
| value: payload |
| response: |
| error: FAILURE |
| clusterError: 9 |
