| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.11. [TC-DD-3.11] Commissioning Flow = 0 (Standard Flow) - QR Code [DUT - |
| Commissioner] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONER |
| - MCORE.DD.QR_COMMISSIONING |
| - MCORE.DD.STANDARD_COMM_FLOW |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as commissioner test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Preconditions" |
| verification: | |
| 1 - DUT is on an operational network and has accurate date, time, timezone, regulatory, and fabric information available. |
| |
| 2 - 5.1.3 - QR code is printed on the device or in additional provided materials (ex: manual). |
| |
| An example onboarding QR code could be "MT:-24J029Q00KA0648G00" (following 5.1.3 "QR Code", Table 34 "Packed Binary Data Structure for Onboarding Payload") which includes: |
| |
| - 3-bit Version String=000 |
| |
| - 16-bit Vendor ID=0xFFF1 (as defined in section 2.5.2. "Vendor Identifier") |
| |
| - 16-bit Product ID=0x8001 (as defined in section 2.5.3. "Product Identifier") |
| |
| - 2-bit Custom Flow=10 (Custom Commissioning Flow = 2) |
| |
| - 8-bit Discovery Capabilities Bitmask=00000100 (OnNetwork) |
| |
| - 12-bit Discriminator=0xF00 |
| |
| - 27-bit Passcode=20202021 |
| |
| - 4-bit Padding=0000 |
| |
| - no variable-length TLV Data included (as defined in section 5.1.3.1. "Payload", subsection "TLV Data") |
| disabled: true |
| |
| - label: |
| "Standard Commissioning Flow: Use a Commissionee with a QR code that |
| has the Custom Flow field set to 0 and supports BLE for its Discovery |
| Capability. Ensure the Version bit string follows the current Matter |
| spec. documentation." |
| PICS: MCORE.DD.DISCOVERY_BLE |
| verification: | |
| Verify on the TH as commissionee side: |
| |
| $ ./out/ble/all-clusters-app/chip-all-clusters-app --capabilities 2 --ble-device 1 |
| ... |
| [1657232267.387816][370320:370320] CHIP:DL: Device Configuration: |
| [1657232267.387853][370320:370320] CHIP:DL: Serial Number: (not set) |
| [1657232267.387907][370320:370320] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1657232267.387942][370320:370320] CHIP:DL: Product Id: 32769 (0x8001) |
| [1657232267.387974][370320:370320] CHIP:DL: Hardware Version: 0 |
| [1657232267.387996][370320:370320] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1657232267.388017][370320:370320] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1657232267.388045][370320:370320] CHIP:DL: Manufacturing Date: (not set) |
| [1657232267.388067][370320:370320] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1657232267.388101][370320:370320] CHIP:SVR: SetupQRCode: [MT:-24J0YXE00KA0648G00] |
| [1657232267.388128][370320:370320] CHIP:SVR: Copy/paste the below URL in a browser to see the QR Code: |
| [1657232267.388148][370320:370320] CHIP:SVR: https://dhrishi.github.io/connectedhomeip/qrcode.html?data=MT%3A-24J0YXE00KA0648G00 |
| [1657232267.388182][370320:370320] CHIP:SVR: Manual pairing code: [749701123365521327694] |
| disabled: true |
| |
| - label: "Scan the QR code from the previous step using the DUT." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| 1. Verify the QR code is scanned by DUT. |
| Note: chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "Using the DUT, parse the THs QR code and follow any steps needed for |
| the Commissioner/Commissionee to complete the commissioning process |
| using BLE" |
| PICS: MCORE.DD.DISCOVERY_BLE |
| verification: | |
| Verify on the TH as commissionee side: |
| |
| [1657232374.956508][370357:370357] CHIP:DL: HandlePlatformSpecificBLEEvent 32784 |
| [1657232374.956534][370357:370357] CHIP:SVR: Commissioning completed successfully |
| [1657232374.956577][370357:370357] CHIP:DIS: Updating services using commissioning mode 0 |
| |
| Verify on the DUT Commissioner side: |
| $ ./chip-tool pairing code 1 MT:-24J0YXE00KA0648G00 |
| |
| [1657232374820] [31379:16804218] CHIP: [CTL] Received CommissioningComplete response, errorCode=0 |
| [1657232374820] [31379:16804218] CHIP: [CTL] Successfully finished commissioning step "SendComplete" |
| [1657232374820] [31379:16804218] CHIP: [CTL] Commissioning stage next step: "SendComplete" -> "Cleanup" |
| [1657232374820] [31379:16804218] CHIP: [CTL] Performing next commissioning step "Cleanup" |
| [1657232374820] [31379:16804218] CHIP: [CTL] Successfully finished commissioning step "Cleanup" |
| [1657232374820] [31379:16804218] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Standard Commissioning Flow: Use a Commissionee with a QR code that |
| has the Custom Flow field set to 0, supports IP Network for its |
| Discovery Capability and is already on the same IP network as the DUT |
| commissioner. Ensure the Version bit string follows the current Matter |
| spec. documentation." |
| PICS: MCORE.DD.DISCOVERY_IP |
| verification: | |
| $ ./out/all-clusters-app/chip-all-clusters-app --custom-flow 0 --capabilities 4 |
| |
| Verify on the TH as commissionee side: |
| [1651105420.610637][27312:27312] CHIP:DL: Device Configuration: |
| [1651105420.610695][27312:27312] CHIP:DL: Serial Number: TEST_SN |
| [1651105420.610727][27312:27312] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1651105420.610761][27312:27312] CHIP:DL: Product Id: 32769 (0x8001) |
| [1651105420.610792][27312:27312] CHIP:DL: Hardware Version: 0 |
| [1651105420.610815][27312:27312] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1651105420.610836][27312:27312] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1651105420.610864][27312:27312] CHIP:DL: Manufacturing Date: (not set) |
| [1651105420.610886][27312:27312] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1651105420.610907][27312:27312] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1651105420.610962][27312:27312] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00] |
| disabled: true |
| |
| - label: "Scan the QR code from the previous step using the DUT." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| 1. Verify the QR code is scanned by DUT |
| |
| Note: chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "Using the DUT, parse the THs QR code and follow any steps needed for |
| the Commissioner/Commissionee to complete the commissioning process |
| using IP Network" |
| PICS: MCORE.DD.DISCOVERY_IP |
| verification: | |
| Verify on the TH Commissionee side: |
| |
| [1651105530.973166][27371:27371] CHIP:SVR: Commissioning completed successfully |
| [1651105530.973215][27371:27371] CHIP:DIS: Updating services using commissioning mode 0 |
| |
| Verify on the DUT Commissioner: |
| $ ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00 |
| |
| [1651105530854] [95067:65607294] CHIP: [CTL] Received CommissioningComplete response |
| [1651105530854] [95067:65607294] CHIP: [CTL] Successfully finished commissioning step "SendComplete" |
| [1651105530854] [95067:65607294] CHIP: [CTL] Commissioning stage next step: "SendComplete" -> "Cleanup" |
| [1651105530854] [95067:65607294] CHIP: [CTL] Performing next commissioning step "Cleanup" |
| [1651105530854] [95067:65607294] CHIP: [CTL] Successfully finished commissioning step "Cleanup" |
| [1651105530854] [95067:65607294] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Standard Commissioning Flow: Use a Commissionee with a QR code that |
| has the Custom Flow field set to 0 and supports SoftAP for its |
| Discovery Capability. Ensure the Version bit string follows the |
| current Matter spec. documentation." |
| PICS: MCORE.DD.DISCOVERY_SOFTAP |
| verification: | |
| Out of Scope for V1.0 |
| SoftAP commissioning not currently supported |
| disabled: true |
| |
| - label: "Scan the QR code from the previous step using the DUT." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| Out of Scope for V1.0 |
| SoftAP commissioning not currently supported |
| 1. Verify the QR code is scanned by DUT, chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "Using the DUT, parse the THs QR code and follow any steps needed for |
| the Commissioner/Commissionee to complete the commissioning process |
| using SoftAP" |
| PICS: MCORE.DD.DISCOVERY_SOFTAP |
| verification: | |
| Out of Scope for V1.0 |
| SoftAP commissioning not currently supported |
| disabled: true |
