| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.14. [TC-DD-3.14] Commissioning Flow - QR Code - Negative Scenario [DUT - |
| Commissioner] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONER |
| - MCORE.DD.QR_COMMISSIONING |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as commissioner test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Preconditions" |
| verification: | |
| 1 - DUT is on an operational network and has accurate date, time, timezone, regulatory, and fabric information available. |
| |
| 2 - 5.1.3 - QR code is printed on the device or in additional provided materials (ex: manual). |
| |
| An example onboarding QR code could be "MT:-24J029Q00KA0648G00" (following 5.1.3 "QR Code", Table 34 "Packed Binary Data Structure for Onboarding Payload") which includes: |
| |
| - 3-bit Version String=000 |
| |
| - 16-bit Vendor ID=0xFFF1 (as defined in section 2.5.2. "Vendor Identifier") |
| |
| - 16-bit Product ID=0x8001 (as defined in section 2.5.3. "Product Identifier") |
| |
| - 2-bit Custom Flow=10 (Custom Commissioning Flow = 2) |
| |
| - 8-bit Discovery Capabilities Bitmask=00000100 (OnNetwork) |
| |
| - 12-bit Discriminator=0xF00 |
| |
| - 27-bit Passcode=20202021 |
| |
| - 4-bit Padding=0000 |
| |
| - no variable-length TLV Data included (as defined in section 5.1.3.1. "Payload", subsection "TLV Data") |
| disabled: true |
| |
| - label: "Locate and scan/read the Commissionees QR code using DUT" |
| verification: | |
| Verify on the TH Commissionee side: |
| $ ./out/all-clusters-app/chip-all-clusters-app --version 0 --vendor-id 0xFFF1 --product-id 0x8001 --custom-flow 2 --capabilities 4 --discriminator 3840 --passcode 20202021 |
| |
| [1657235470.970680][371041:371041] CHIP:DL: Device Configuration: |
| [1657235470.970772][371041:371041] CHIP:DL: Serial Number: (not set) |
| [1657235470.970811][371041:371041] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1657235470.970845][371041:371041] CHIP:DL: Product Id: 32769 (0x8001) |
| [1657235470.970892][371041:371041] CHIP:DL: Hardware Version: 0 |
| [1657235470.970929][371041:371041] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1657235470.970984][371041:371041] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1657235470.971031][371041:371041] CHIP:DL: Manufacturing Date: (not set) |
| [1657235470.971095][371041:371041] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1657235470.971147][371041:371041] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1657235470.971199][371041:371041] CHIP:SVR: SetupQRCode: [MT:-24J029Q00KA0648G00] |
| [1657235470.971258][371041:371041] CHIP:SVR: Copy/paste the below URL in a browser to see the QR Code: |
| [1657235470.971293][371041:371041] CHIP:SVR: https://dhrishi.github.io/connectedhomeip/qrcode.html?data=MT%3A-24J029Q00KA0648G00 |
| disabled: true |
| |
| - label: |
| "Version String: Using the QR code from Step 1, generate a new QR code |
| but substituting out the current Version String with an invalid |
| Version String (i.e. 010 or any non-zero 3-bit value)" |
| verification: | |
| 1. Use chip-tool"s "payload generate-qrcode" command to help generate the new, invalid QR code |
| Verify on the TH Commissionee side: |
| $ ./chip-tool payload generate-qrcode --existing-payload MT:-24J029Q00KA0648G00 --allow-invalid-payload 1 --version 2 |
| [1657235626568] [31698:16839018] CHIP: [TOO] QR Code: MT:034J029Q00KA0648G00 |
| disabled: true |
| |
| - label: |
| "Scan/read the QR code, generated in the previous step, using the DUT" |
| verification: | |
| Verify on the DUT Commissioner side: |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| No applicable TH Logs |
| disabled: true |
| |
| - label: |
| "Using the QR code from Step 1, ensure the THs Discovery Capability |
| bit string is NOT set to BLE for discovery (i.e. set to OnNetwork |
| discovery capability)" |
| PICS: MCORE.DD.DISCOVERY_BLE |
| verification: | |
| 1. Use chip-tool"s "payload generate-qrcode" command to help generate the new, invalid QR code |
| Verify on the TH Commissionee side: |
| $ ./chip-tool payload generate-qrcode --existing-payload MT:-24J029Q00KA0648G00 --allow-invalid-payload 1 --rendezvous 4 |
| [1657235754393] [31702:16840391] CHIP: [TOO] QR Code: MT:-24J029Q00KA0648G00 |
| |
| Verify on the DUT Commissioner side: |
| No applicable logs on the DUT side |
| disabled: true |
| |
| - label: "Scan/read the QR code of the TH device using the DUT" |
| PICS: MCORE.DD.DISCOVERY_BLE |
| verification: | |
| Verify on the DUT Commissioner side: |
| ./chip-tool pairing code 1 MT:-24J029Q00KA0648G00 |
| [1657235905214] [31706:16841970] CHIP: [CTL] Discovered device to be commissioned over DNS-SD |
| ... |
| [1657235906071] [31706:16841969] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Passcode: Using the QR code from Step 1, generate a new QR code using |
| all the same Onboarding Payload components except for the Passcode. |
| For each passcode in the following list, set the Passcode component to |
| one of the invalid Passcodes and generate a new QR code using all the |
| same Onboarding Payload components and one Passcode from the list: |
| 00000000, 11111111, 22222222, 33333333, 44444444, 55555555, 66666666, |
| 77777777, 88888888, 99999999, 12345678, 87654321" |
| verification: | |
| No applicable TH or DUT Logs |
| "MT:-24J029Q00OC0000000" (00000000), |
| "MT:-24J029Q00KMSP0Z800" (11111111), |
| "MT:-24J029Q00GWID1WH00" (22222222), |
| "MT:-24J029Q00C4912TQ00" (33333333), |
| "MT:-24J029Q008E.Q2QZ00" (44444444), |
| "MT:-24J029Q004ORE3N610" (55555555), |
| "MT:-24J029Q000YH24KF10" (66666666), |
| "MT:-24J029Q00Y58S4HO10" (77777777), |
| "MT:-24J029Q00UF-F5EX10" (88888888), |
| "MT:-24J029Q00QPQ36B420" (99999999), |
| "MT:-24J029Q004QG46Y900" (12345678), |
| "MT:-24J029Q00YX018EW10" (87654321) |
| disabled: true |
| |
| - label: |
| "Scan each of the generated QR codes from the previous step using DUT" |
| verification: | |
| Verify on the DUT Commissioner side: |
| No applicable TH Logs |
| |
| ./chip-tool pairing code 1 MT:-24J029Q00OC0000000 |
| |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00OC0000000 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00KMSP0Z800 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00GWID1WH00 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00C4912TQ00 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q008E.Q2QZ00 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q004ORE3N610 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q000YH24KF10 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00Y58S4HO10 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00UF-F5EX10 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00QPQ36B420 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q004QG46Y900 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| |
| |
| $ ./chip-tool pairing code 1 MT:-24J029Q00YX018EW10 |
| Run command failure: ../../third_party/connectedhomeip/src/controller/SetUpCodePairer.cpp:50: CHIP Error 0x0000002F: Invalid argument |
| disabled: true |
| |
| - label: |
| "Prefix: Using the QR code from Step 1, generate a new QR code but |
| substituting out the current Prefix with an invalid Prefix that is not |
| MT: (i.e. Prefix=AB:)" |
| verification: | |
| AB:-24J029Q00KA0648G00 |
| |
| No applicable TH or DUT Logs |
| disabled: true |
| |
| - label: |
| "Scan/read the QR code, generated in the previous step, using the DUT" |
| verification: | |
| Verify on the DUT Commissioner side: |
| |
| $ ./chip-tool pairing code 1 AB:-24J029Q00KA0648G00 |
| [1657236169984] [31732:16844455] CHIP: [TOO] Run command failure: ../../examples/chip-tool/third_party/connectedhomeip/src/setup_payload/ManualSetupPayloadParser.cpp:50: CHIP Error 0x00000013: Integrity check failed |
| |
| No applicable TH Logs |
| disabled: true |
