| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 3.3.21. [TC-DD-3.21] Commissioning Flow - Commission Multiple-Endpoint |
| Device [DUT - Commissioner] |
| |
| PICS: |
| - MCORE.ROLE.COMMISSIONER |
| - MCORE.DD.QR_COMMISSIONING |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| Chip-tool command used below are an example to verify the DUT as commissioner test cases. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Preconditions" |
| verification: | |
| 1 - DUT is on an operational network and has accurate date, time, timezone, regulatory, and fabric information available. |
| 2 - 5.1.3 - QR code is printed on the Commissionee device or in additional provided materials (ex: manual). |
| disabled: true |
| |
| - label: |
| "Place TH into commissioning mode using the TH manufacturers means to |
| be discovered by the DUT Commissioner" |
| verification: | |
| $ ./out/all-clusters-app/chip-all-clusters-app --discriminator 3840 |
| |
| Verify on TH Commissionee side: |
| [1651109580.413197][31207:31207] CHIP:DL: Device Configuration: |
| [1651109580.413259][31207:31207] CHIP:DL: Serial Number: TEST_SN |
| [1651109580.413294][31207:31207] CHIP:DL: Vendor Id: 65521 (0xFFF1) |
| [1651109580.413327][31207:31207] CHIP:DL: Product Id: 32769 (0x8001) |
| [1651109580.413358][31207:31207] CHIP:DL: Hardware Version: 0 |
| [1651109580.413380][31207:31207] CHIP:DL: Setup Pin Code (0 for UNKNOWN/ERROR): 20202021 |
| [1651109580.413401][31207:31207] CHIP:DL: Setup Discriminator (0xFFFF for UNKNOWN/ERROR): 3840 (0xF00) |
| [1651109580.413428][31207:31207] CHIP:DL: Manufacturing Date: (not set) |
| [1651109580.413450][31207:31207] CHIP:DL: Device Type: 65535 (0xFFFF) |
| [1651109580.413470][31207:31207] CHIP:-: ==== Onboarding payload for Standard Commissioning Flow ==== |
| [1651109580.413525][31207:31207] CHIP:SVR: SetupQRCode: [MT:-24J0AFN00KA0648G00] |
| disabled: true |
| |
| - label: "Scan THs QR code using the DUT Commissioner." |
| PICS: MCORE.DD.SCAN_QR_CODE |
| verification: | |
| 1. Verify the QR code is scanned by DUT |
| Note: chip-tool does not support physically scanning QR codes |
| disabled: true |
| |
| - label: |
| "DUT parses THs QR code. Follow any steps needed for the |
| Commissioner/Commissionee to complete the commissioning process over |
| the TH Commissionees method of device discovery" |
| verification: | |
| Verify on TH Commissionee side: |
| [1651109784.452770][31207:31207] CHIP:SVR: Commissioning completed successfully |
| [1651109784.452813][31207:31207] CHIP:DIS: Updating services using commissioning mode 0 |
| |
| Verify on DUT Commissioner side: |
| $ ./chip-tool pairing code 1 MT:-24J0AFN00KA0648G00 |
| |
| [1651109784376] [95553:65657838] CHIP: [CTL] Received CommissioningComplete response |
| [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step "SendComplete" |
| [1651109784376] [95553:65657838] CHIP: [CTL] Commissioning stage next step: "SendComplete" -> "Cleanup" |
| [1651109784376] [95553:65657838] CHIP: [CTL] Performing next commissioning step "Cleanup" |
| [1651109784376] [95553:65657838] CHIP: [CTL] Successfully finished commissioning step "Cleanup" |
| [1651109784376] [95553:65657838] CHIP: [TOO] Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "For each TH Endpoint that implements the On/Off light device, verify |
| that the DUT acknowledges the existence of the Endpoint through DUT |
| issuing an On command to the respective Endpoint (e.g. through some |
| user action to trigger such command)." |
| verification: | |
| 1. Send "on" command from Commissioner to TH Endpoint 1 |
| Verify on DUT Commissioner side: |
| $ ./chip-tool onoff on 1 1 |
| [...] |
| [1657930715416] [56399:2451384] CHIP: [DMG] Received Command Response Status for Endpoint=1 Cluster=0x0000_0006 Command=0x0000_0001 Status=0x0 |
| |
| Verify on TH Commissionee side: |
| [...] |
| [1657930715.432295][2911:2911] CHIP:ZCL: On/Off set value: 1 1 |
| [1657930715.432341][2911:2911] CHIP:ZCL: Toggle on/off from 0 to 1 |
| [1657930715.432383][2911:2911] CHIP:ZCL: On Command - OffWaitTime : 0 |
| [1657930715.432422][2911:2911] CHIP:DMG: Endpoint 1, Cluster 0x0000_0006 update version to ce1d8e1f |
| [1657930715.432468][2911:2911] CHIP:ZCL: On/Toggle Command - Stop Timer |
| [1657930715.432509][2911:2911] CHIP:DMG: Endpoint 1, Cluster 0x0000_0006 update version to ce1d8e20 |
| |
| |
| 2. Send "on" command from Commissioner to TH Endpoint 2 |
| On DUT=chip-tool: |
| $ ./chip-tool onoff on 1 2 |
| [...] |
| [1657930953792] [56404:2453640] CHIP: [DMG] Received Command Response Status for Endpoint=2 Cluster=0x0000_0006 Command=0x0000_0001 Status=0x0 |
| |
| On TH=all-clusters-app: |
| [...] |
| [1657930953.816805][2911:2911] CHIP:ZCL: On/Off set value: 2 1 |
| [1657930953.816841][2911:2911] CHIP:ZCL: Toggle on/off from 0 to 1 |
| [1657930953.816870][2911:2911] CHIP:DMG: Endpoint 2, Cluster 0x0000_0006 update version to 6475f591 |
| disabled: true |
