| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 111.2.2. [TC-DRLK-2.2] Verification for Door lock command[DUT-Server] |
| |
| PICS: |
| - DRLK.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Door Lock" |
| endpoint: 1 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Create new user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "xxx" |
| - name: "userUniqueId" |
| value: 6452 |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| |
| - label: "Read the user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "xxx" |
| - name: "userUniqueId" |
| value: 6452 |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Create new PIN credential and lock/unlock user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Verify created PIN credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: true |
| - name: "userIndex" |
| value: 1 |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: |
| "TH writes the RequirePINforRemoteOperation attribute value as False |
| on the DUT" |
| PICS: DRLK.S.A0033 |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: false |
| |
| - label: |
| "TH writes the RequirePINforRemoteOperation attribute value as False |
| on the DUT and Verify DUT responds with UNSUPPORTED_WRITE" |
| PICS: "!DRLK.S.A0033" |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: false |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "TH reads the RequirePINforRemoteOperation attribute from the DUT" |
| PICS: DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 |
| command: "readAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| response: |
| value: false |
| |
| - label: "TH sends Lock Door Command to the DUT without PINCode" |
| PICS: DRLK.S.C00.Rsp |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| response: |
| error: 0x00 |
| |
| - label: "TH sends Lock Door Command to the DUT with valid PINCode" |
| PICS: DRLK.S.C00.Rsp |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "pinCode" |
| value: "123456" |
| |
| - label: |
| "TH writes the RequirePINforRemoteOperation attribute value as False |
| on the DUT" |
| PICS: DRLK.S.A0033 |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: true |
| |
| - label: |
| "TH writes the RequirePINforRemoteOperation attribute value as False |
| on the DUT and Verify DUT responds with UNSUPPORTED_WRITE" |
| PICS: "!DRLK.S.A0033" |
| command: "writeAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| arguments: |
| value: true |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "TH reads the RequirePINforRemoteOperation attribute from the DUT" |
| PICS: DRLK.S.F07 && DRLK.S.F00 && DRLK.S.A0033 |
| command: "readAttribute" |
| attribute: "RequirePINforRemoteOperation" |
| response: |
| value: true |
| |
| - label: "TH sends Lock Door Command to the DUT with valid PINCode" |
| PICS: DRLK.S.C00.Rsp && DRLK.S.A0033 |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "pinCode" |
| value: "123456" |
| |
| - label: "TH sends Lock Door Command to the DUT without valid PINCode" |
| PICS: DRLK.S.C00.Rsp && DRLK.S.A0033 |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "pinCode" |
| value: "645321" |
| response: |
| error: FAILURE |
| |
| - label: |
| "TH sends Lock Door Command to the DUT without any argument PINCode" |
| PICS: DRLK.S.C00.Rsp && DRLK.S.A0033 |
| command: "LockDoor" |
| timedInteractionTimeoutMs: 1000 |
| response: |
| error: FAILURE |
| |
| - label: "TH reads the WrongCodeEntryLimit attribute from the DUT" |
| PICS: DRLK.S.A0030 |
| command: "readAttribute" |
| attribute: "WrongCodeEntryLimit" |
| constraints: |
| minValue: 1 |
| maxValue: 255 |
| |
| #currently for loop is not implemented in yaml framework so converted this step as user prompt |
| - label: |
| "TH sends an Unlock Door Command from the DUT with invalid PINCode. |
| Repeat this step PIXIT.DRLK.WrongCodeEntryLimit times and Verify that |
| DUT sends failure response to the TH" |
| verification: | |
| ./chip-tool doorlock unlock-door 1 1 --timedInteractionTimeoutMs 1000 --PinCode 1234568 |
| |
| Verify " DUT sends failure response" on the TH(Chip-tool) Log: |
| |
| [1659013993.892445][25432:25437] CHIP:DMG: CommandPathIB = |
| [1659013993.892496][25432:25437] CHIP:DMG: { |
| [1659013993.892546][25432:25437] CHIP:DMG: EndpointId = 0x1, |
| [1659013993.892597][25432:25437] CHIP:DMG: ClusterId = 0x101, |
| [1659013993.892647][25432:25437] CHIP:DMG: CommandId = 0x1, |
| [1659013993.892694][25432:25437] CHIP:DMG: }, |
| [1659013993.892747][25432:25437] CHIP:DMG: |
| [1659013993.892791][25432:25437] CHIP:DMG: StatusIB = |
| [1659013993.892840][25432:25437] CHIP:DMG: { |
| [1659013993.892890][25432:25437] CHIP:DMG: status = 0x01 (FAILURE), |
| [1659013993.892938][25432:25437] CHIP:DMG: }, |
| [1659013993.892987][25432:25437] CHIP:DMG: |
| [1659013993.893029][25432:25437] CHIP:DMG: }, |
| [1659013993.893076][25432:25437] CHIP:DMG: |
| [1659013993.893105][25432:25437] CHIP:DMG: }, |
| [1659013993.893147][25432:25437] CHIP:DMG: |
| [1659013993.893173][25432:25437] CHIP:DMG: ], |
| [1659013993.893203][25432:25437] CHIP:DMG: |
| [1659013993.893227][25432:25437] CHIP:DMG: InteractionModelRevision = 1 |
| [1659013993.893251][25432:25437] CHIP:DMG: }, |
| [1659013993.893310][25432:25437] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0101 Command=0x0000_0001 Status=0x1 |
| [1659013993.893344][25432:25437] CHIP:TOO: Error: IM Error 0x00000501: General error: 0x01 (FAILURE) |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DRLK.S.A0030 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH sends an Unlock Door Command from User1 to the DUT with the valid |
| PINCode and verify the DUT response" |
| verification: | |
| ./chip-tool doorlock unlock-door 1 1 --timedInteractionTimeoutMs 1000 --PinCode 123456 |
| |
| Verify " DUT sends failure response" on the TH(Chip-tool) Log: |
| |
| [1659517923.875822][33902:33907] CHIP:DMG: StatusIB = |
| [1659517923.875858][33902:33907] CHIP:DMG: { |
| [1659517923.875894][33902:33907] CHIP:DMG: status = 0x01 (FAILURE), |
| [1659517923.876008][33902:33907] CHIP:DMG: }, |
| [1659517923.876048][33902:33907] CHIP:DMG: |
| [1659517923.876079][33902:33907] CHIP:DMG: }, |
| [1659517923.876116][33902:33907] CHIP:DMG: |
| [1659517923.876145][33902:33907] CHIP:DMG: }, |
| [1659517923.876178][33902:33907] CHIP:DMG: |
| [1659517923.876233][33902:33907] CHIP:DMG: ], |
| [1659517923.876266][33902:33907] CHIP:DMG: |
| [1659517923.876290][33902:33907] CHIP:DMG: InteractionModelRevision = 1 |
| [1659517923.876395][33902:33907] CHIP:DMG: }, |
| [1659517923.876460][33902:33907] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0101 Command=0x0000_0001 Status=0x1 |
| [1659517923.876495][33902:33907] CHIP:TOO: Error: IM Error 0x00000501: General error: 0x01 (FAILURE) |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DRLK.S.A0030 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "Wait for PIXIT.DRLK.UserCodeTemporaryDisableTime.TH then sends an |
| Unlock Door Command from User1 to the DUT with the valid PINCode." |
| verification: | |
| ./chip-tool doorlock read user-code-temporary-disable-time 1 1 |
| |
| Verify "UserCodeTemporaryDisable" on the TH(Chip-tool) Log: |
| |
| [1661767967.006958][131055:131060] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0101 Attribute 0x0000_0031 DataVersion: 683420143 |
| [1661767967.006988][131055:131060] CHIP:TOO: UserCodeTemporaryDisableTime: 10 |
| |
| ./chip-tool doorlock unlock-door 1 1 --timedInteractionTimeoutMs 1000 --PinCode 123456 |
| |
| Verify " DUT sends success response" on the TH(Chip-tool) Log: |
| |
| [1659517972.769737][33910:33915] CHIP:DMG: |
| [1659517972.769774][33910:33915] CHIP:DMG: StatusIB = |
| [1659517972.769815][33910:33915] CHIP:DMG: { |
| [1659517972.769856][33910:33915] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1659517972.769899][33910:33915] CHIP:DMG: }, |
| [1659517972.769939][33910:33915] CHIP:DMG: |
| [1659517972.769974][33910:33915] CHIP:DMG: }, |
| [1659517972.770015][33910:33915] CHIP:DMG: |
| [1659517972.770045][33910:33915] CHIP:DMG: }, |
| [1659517972.770080][33910:33915] CHIP:DMG: |
| [1659517972.770109][33910:33915] CHIP:DMG: ], |
| [1659517972.770144][33910:33915] CHIP:DMG: |
| [1659517972.770172][33910:33915] CHIP:DMG: InteractionModelRevision = 1 |
| [1659517972.770200][33910:33915] CHIP:DMG: }, |
| [1659517972.770267][33910:33915] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0101 Command=0x0000_0001 Status=0x0 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DRLK.S.A0030 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH writes WrongCodeEntryLimit attribute value as between 1 and 255 on |
| the DUT and Verify that the DUT sends Success response" |
| PICS: DRLK.S.A0030 |
| command: "writeAttribute" |
| attribute: "WrongCodeEntryLimit" |
| arguments: |
| value: 3 |
| |
| - label: |
| "TH writes WrongCodeEntryLimit attribute value as between 1 and 255 on |
| the DUT and verify DUT responds with UNSUPPORTED_WRITE" |
| PICS: "!DRLK.S.A0030" |
| command: "writeAttribute" |
| attribute: "WrongCodeEntryLimit" |
| arguments: |
| value: 3 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "TH reads the UserCodeTemporaryDisableTime attribute from the DUT" |
| PICS: DRLK.S.A0031 |
| command: "readAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| constraints: |
| minValue: 1 |
| maxValue: 255 |
| |
| - label: |
| "TH writes UserCodeTemporaryDisableTime attribute value as between 1 |
| and 255 on the DUT and Verify that the DUT sends Success response" |
| PICS: DRLK.S.A0031 |
| command: "writeAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| arguments: |
| value: 15 |
| |
| - label: |
| "TH writes UserCodeTemporaryDisableTime attribute value as between 1 |
| and 255 on the DUT and verify DUT responds with UNSUPPORTED_WRITE" |
| PICS: "!DRLK.S.A0031" |
| command: "writeAttribute" |
| attribute: "UserCodeTemporaryDisableTime" |
| arguments: |
| value: 15 |
| response: |
| error: UNSUPPORTED_WRITE |
| |
| - label: "Clean the created user" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| |
| - label: "Cleanup the created credential" |
| PICS: DRLK.S.C26.Rsp |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 1000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
