blob: 90d4191b1f142821977b4d6a04b0995f22ddb421 [file] [log] [blame]
/*
*
* Copyright (c) 2021 Project CHIP Authors
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
#include <lib/support/CodeUtils.h>
#include <lib/support/DefaultStorageKeyAllocator.h>
#include <lib/support/SafeInt.h>
#include <lib/support/logging/CHIPLogging.h>
#include <platform/CHIPDeviceLayer.h>
#include <platform/KeyValueStoreManager.h>
#include <platform/NetworkCommissioning.h>
#include <platform/OpenThread/GenericNetworkCommissioningThreadDriver.h>
#include <platform/OpenThread/GenericThreadStackManagerImpl_OpenThread.h>
#include <platform/ThreadStackManager.h>
#include <limits>
using namespace chip;
using namespace chip::Thread;
using namespace chip::DeviceLayer::PersistedStorage;
namespace chip {
namespace DeviceLayer {
namespace NetworkCommissioning {
// NOTE: For GenericThreadDriver, we assume that the network configuration is persisted by
// the OpenThread stack after ConnectNetwork command is called, and before that, all the changes
// are made to a local copy of the dataset stored in mStagingNetwork.
// Also, in order to support the fail-safe mechanism, the configuration is backed up in a temporary
// KVS slot upon any changes and restored when the fail-safe timeout is triggered or the device
// reboots without completing all the changes.
CHIP_ERROR GenericThreadDriver::Init(Internal::BaseDriver::NetworkStatusChangeCallback * statusChangeCallback)
{
ThreadStackMgrImpl().SetNetworkStatusChangeCallback(statusChangeCallback);
ThreadStackMgrImpl().GetThreadProvision(mStagingNetwork);
// If the network configuration backup exists, it means that the device has been rebooted with
// the fail-safe armed. Since OpenThread persists all operational dataset changes, the backup
// must be restored on the boot. If there's no backup, the below function is a no-op.
RevertConfiguration();
return CHIP_NO_ERROR;
}
void GenericThreadDriver::Shutdown()
{
ThreadStackMgrImpl().SetNetworkStatusChangeCallback(nullptr);
}
CHIP_ERROR GenericThreadDriver::CommitConfiguration()
{
// OpenThread persists the network configuration on AttachToThreadNetwork, so simply remove
// the backup, so that it cannot be restored. If no backup could be found, it means that the
// configuration has not been modified since the fail-safe was armed, so return with no error.
CHIP_ERROR error = KeyValueStoreMgr().Delete(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName());
return error == CHIP_ERROR_PERSISTED_STORAGE_VALUE_NOT_FOUND ? CHIP_NO_ERROR : error;
}
CHIP_ERROR GenericThreadDriver::RevertConfiguration()
{
uint8_t datasetBytes[Thread::kSizeOperationalDataset];
size_t datasetLength;
CHIP_ERROR error = KeyValueStoreMgr().Get(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), datasetBytes,
sizeof(datasetBytes), &datasetLength);
// If no backup could be found, it means that the network configuration has not been modified
// since the fail-safe was armed, so return with no error.
ReturnErrorCodeIf(error == CHIP_ERROR_PERSISTED_STORAGE_VALUE_NOT_FOUND, CHIP_NO_ERROR);
ChipLogProgress(NetworkProvisioning, "Reverting Thread operational dataset");
if (error == CHIP_NO_ERROR)
{
error = mStagingNetwork.Init(ByteSpan(datasetBytes, datasetLength));
}
if (error == CHIP_NO_ERROR)
{
error = DeviceLayer::ThreadStackMgrImpl().AttachToThreadNetwork(mStagingNetwork, /* callback */ nullptr);
}
// Always remove the backup, regardless if it can be successfully restored.
KeyValueStoreMgr().Delete(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName());
return error;
}
Status GenericThreadDriver::AddOrUpdateNetwork(ByteSpan operationalDataset, MutableCharSpan & outDebugText,
uint8_t & outNetworkIndex)
{
ByteSpan newExtpanid;
Thread::OperationalDataset newDataset;
outDebugText.reduce_size(0);
outNetworkIndex = 0;
VerifyOrReturnError(newDataset.Init(operationalDataset) == CHIP_NO_ERROR && newDataset.IsCommissioned(), Status::kOutOfRange);
newDataset.GetExtendedPanIdAsByteSpan(newExtpanid);
// We only support one active operational dataset. Add/Update based on either:
// Staging network not commissioned yet (active) or we are updating the dataset with same Extended Pan ID.
VerifyOrReturnError(!mStagingNetwork.IsCommissioned() || MatchesNetworkId(mStagingNetwork, newExtpanid) == Status::kSuccess,
Status::kBoundsExceeded);
VerifyOrReturnError(BackupConfiguration() == CHIP_NO_ERROR, Status::kUnknownError);
mStagingNetwork = newDataset;
return Status::kSuccess;
}
Status GenericThreadDriver::RemoveNetwork(ByteSpan networkId, MutableCharSpan & outDebugText, uint8_t & outNetworkIndex)
{
outDebugText.reduce_size(0);
outNetworkIndex = 0;
NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId);
VerifyOrReturnError(status == Status::kSuccess, status);
VerifyOrReturnError(BackupConfiguration() == CHIP_NO_ERROR, Status::kUnknownError);
mStagingNetwork.Clear();
return Status::kSuccess;
}
Status GenericThreadDriver::ReorderNetwork(ByteSpan networkId, uint8_t index, MutableCharSpan & outDebugText)
{
outDebugText.reduce_size(0);
NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId);
VerifyOrReturnError(status == Status::kSuccess, status);
VerifyOrReturnError(index == 0, Status::kOutOfRange);
return Status::kSuccess;
}
void GenericThreadDriver::ConnectNetwork(ByteSpan networkId, ConnectCallback * callback)
{
NetworkCommissioning::Status status = MatchesNetworkId(mStagingNetwork, networkId);
if (status == Status::kSuccess && BackupConfiguration() != CHIP_NO_ERROR)
{
status = Status::kUnknownError;
}
if (status == Status::kSuccess &&
DeviceLayer::ThreadStackMgrImpl().AttachToThreadNetwork(mStagingNetwork, callback) != CHIP_NO_ERROR)
{
status = Status::kUnknownError;
}
if (status != Status::kSuccess)
{
callback->OnResult(status, CharSpan(), 0);
}
}
void GenericThreadDriver::ScanNetworks(ThreadDriver::ScanCallback * callback)
{
if (DeviceLayer::ThreadStackMgrImpl().StartThreadScan(callback) != CHIP_NO_ERROR)
{
callback->OnFinished(Status::kUnknownError, CharSpan(), nullptr);
}
}
Status GenericThreadDriver::MatchesNetworkId(const Thread::OperationalDataset & dataset, const ByteSpan & networkId) const
{
ByteSpan extpanid;
if (!dataset.IsCommissioned())
{
return Status::kNetworkIDNotFound;
}
if (dataset.GetExtendedPanIdAsByteSpan(extpanid) != CHIP_NO_ERROR)
{
return Status::kUnknownError;
}
return networkId.data_equal(extpanid) ? Status::kSuccess : Status::kNetworkIDNotFound;
}
CHIP_ERROR GenericThreadDriver::BackupConfiguration()
{
// If configuration is already backed up, return with no error
CHIP_ERROR err = KeyValueStoreMgr().Get(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), nullptr, 0);
if (err == CHIP_NO_ERROR || err == CHIP_ERROR_BUFFER_TOO_SMALL)
{
return CHIP_NO_ERROR;
}
ByteSpan dataset = mStagingNetwork.AsByteSpan();
return KeyValueStoreMgr().Put(DefaultStorageKeyAllocator::FailSafeNetworkConfig().KeyName(), dataset.data(), dataset.size());
}
size_t GenericThreadDriver::ThreadNetworkIterator::Count()
{
return driver->mStagingNetwork.IsCommissioned() ? 1 : 0;
}
bool GenericThreadDriver::ThreadNetworkIterator::Next(Network & item)
{
if (exhausted || !driver->mStagingNetwork.IsCommissioned())
{
return false;
}
uint8_t extpanid[kSizeExtendedPanId];
VerifyOrReturnError(driver->mStagingNetwork.GetExtendedPanId(extpanid) == CHIP_NO_ERROR, false);
memcpy(item.networkID, extpanid, kSizeExtendedPanId);
item.networkIDLen = kSizeExtendedPanId;
item.connected = false;
exhausted = true;
Thread::OperationalDataset currentDataset;
uint8_t enabledExtPanId[Thread::kSizeExtendedPanId];
// The Thread network is not actually enabled.
VerifyOrReturnError(ConnectivityMgrImpl().IsThreadAttached(), true);
VerifyOrReturnError(ThreadStackMgrImpl().GetThreadProvision(currentDataset) == CHIP_NO_ERROR, true);
// The Thread network is not enabled, but has a different extended pan id.
VerifyOrReturnError(currentDataset.GetExtendedPanId(enabledExtPanId) == CHIP_NO_ERROR, true);
VerifyOrReturnError(memcmp(extpanid, enabledExtPanId, kSizeExtendedPanId) == 0, true);
// The Thread network is enabled and has the same extended pan id as the one in our record.
item.connected = true;
return true;
}
} // namespace NetworkCommissioning
} // namespace DeviceLayer
} // namespace chip