blob: 8dfc7086417d2dca190c9cde40cb0f2932e5c0c8 [file] [log] [blame]
# Copyright (c) 2020-2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
name: Builds
on:
push:
pull_request:
merge_group:
workflow_dispatch:
concurrency:
group: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
cancel-in-progress: true
env:
CHIP_NO_LOG_TIMESTAMPS: true
# XXX: Workaround for https://github.com/actions/cache/issues/1141
SEGMENT_DOWNLOAD_TIMEOUT_MINS: 3
jobs:
build_linux_gcc_debug:
name: Build on Linux (gcc_debug)
timeout-minutes: 85
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: connectedhomeip/chip-build:0.7.3
volumes:
- "/tmp/log_output:/tmp/test_logs"
options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJSON(github) }}
run: echo "$GITHUB_CONTEXT"
- name: Dump Concurrency context
env:
CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
run: echo "$CONCURRENCY_CONTEXT"
- uses: Wandalen/wretry.action@v1.0.36
name: Checkout
with:
action: actions/checkout@v3
with: |
token: ${{ github.token }}
attempt_limit: 3
attempt_delay: 2000
- name: Checkout submodules
run: scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform linux
- name: Try to ensure the directories for core dumping exist and we
can write them.
run: |
mkdir /tmp/cores || true
sysctl -w kernel.core_pattern=/tmp/cores/core.%u.%p.%t || true
- name: Bootstrap cache
uses: actions/cache@v3
timeout-minutes: 10
with:
key: ${{ runner.os }}-env-${{ hashFiles('scripts/setup/*', 'third_party/pigweed/**') }}
path: |
.environment
build_overrides/pigweed_environment.gni
- name: Bootstrap
timeout-minutes: 10
run: bash scripts/bootstrap.sh
- name: Uploading bootstrap logs
uses: actions/upload-artifact@v3
if: ${{ always() && !env.ACT }}
with:
name: bootstrap-logs
path: |
.environment/gn_out/.ninja_log
.environment/pigweed-venv/*.log
- name: Setup Build
run: scripts/build/gn_gen.sh --args="chip_config_memory_debug_checks=true chip_config_memory_debug_dmalloc=false"
- name: Run Build
timeout-minutes: 20
run: scripts/run_in_build_env.sh "ninja -C ./out"
- name: Run Tests
timeout-minutes: 30
run: scripts/tests/gn_tests.sh
# TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
# TODO https://github.com/project-chip/connectedhomeip/issues/1512
# - name: Run Code Coverage
# if: ${{ contains('main', env.BUILD_TYPE) }}
# run: scripts/tools/codecoverage.sh
# - name: Upload Code Coverage
# if: ${{ contains('main', env.BUILD_TYPE) }}
# run: bash <(curl -s https://codecov.io/bash)
- name: Setup Build Without Detail Logging
run: scripts/build/gn_gen.sh --args="chip_detail_logging=false"
- name: Run Build Without Detail Logging
timeout-minutes: 20
run: scripts/run_in_build_env.sh "ninja -C ./out"
- name: Setup Build Without Progress Logging
run: scripts/build/gn_gen.sh --args="chip_detail_logging=false chip_progress_logging=false"
- name: Run Build Without Progress Logging
timeout-minutes: 20
run: scripts/run_in_build_env.sh "ninja -C ./out"
- name: Setup Build Without Error Logging
run: scripts/build/gn_gen.sh --args="chip_detail_logging=false chip_progress_logging=false chip_error_logging=false"
- name: Run Build Without Error Logging
timeout-minutes: 20
run: scripts/run_in_build_env.sh "ninja -C ./out"
- name: Uploading core files
uses: actions/upload-artifact@v3
if: ${{ failure() && !env.ACT }}
with:
name: crash-core-linux-gcc-debug
path: /tmp/cores/
# Cores are big; don't hold on to them too long.
retention-days: 5
# OBJDIR on linux is > 10K files and takes more than 50 minutes to upload, usually
# having the job timeout.
#
# If re-enabling, some subset of this should be picked
#
# - name: Uploading objdir for debugging
# uses: actions/upload-artifact@v3
# if: ${{ failure() && !env.ACT }}
# with:
# name: crash-objdir-linux-gcc-debug
# path: out/
# # objdirs are big; don't hold on to them too long.
# retention-days: 5
build_linux:
name: Build on Linux (fake, gcc_release, clang, simulated)
timeout-minutes: 150
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: connectedhomeip/chip-build:0.7.3
volumes:
- "/tmp/log_output:/tmp/test_logs"
options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJSON(github) }}
run: echo "$GITHUB_CONTEXT"
- name: Dump Concurrency context
env:
CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
run: echo "$CONCURRENCY_CONTEXT"
- uses: Wandalen/wretry.action@v1.0.36
name: Checkout
with:
action: actions/checkout@v3
with: |
token: ${{ github.token }}
attempt_limit: 3
attempt_delay: 2000
# - name: Initialize CodeQL
# if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
# uses: github/codeql-action/init@v1
# with:
# languages: "cpp"
- name: Checkout submodules
run: scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform linux
- name: Try to ensure the directories for core dumping exist and we
can write them.
run: |
mkdir /tmp/cores || true
sysctl -w kernel.core_pattern=/tmp/cores/core.%u.%p.%t || true
- name: Bootstrap cache
uses: actions/cache@v3
timeout-minutes: 10
with:
key: ${{ runner.os }}-env-${{ hashFiles('scripts/setup/*', 'third_party/pigweed/**') }}
path: |
.environment
build_overrides/pigweed_environment.gni
- name: Bootstrap
timeout-minutes: 10
run: bash scripts/bootstrap.sh
- name: Uploading bootstrap logs
uses: actions/upload-artifact@v3
if: ${{ always() && !env.ACT }}
with:
name: bootstrap-logs
path: |
.environment/gn_out/.ninja_log
.environment/pigweed-venv/*.log
- name: Setup and Build Simulated Device
timeout-minutes: 20
run: |
BUILD_TYPE=simulated
GN_ARGS='chip_tests_zap_config="app1" chip_project_config_include_dirs=["../../examples/placeholder/linux/apps/app1/include", "../../config/standalone"] chip_config_network_layer_ble=false'
CHIP_ROOT_PATH=examples/placeholder/linux
CHIP_ROOT_PATH="$CHIP_ROOT_PATH" BUILD_TYPE="$BUILD_TYPE" scripts/build/gn_gen.sh --args="$GN_ARGS"
scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
- name: Setup Build, Run Build and Run Tests
timeout-minutes: 90
run: |
BUILD_TYPE=gcc_release scripts/build/gn_gen.sh --args="is_debug=false"
scripts/run_in_build_env.sh "ninja -C ./out/gcc_release"
BUILD_TYPE=gcc_release scripts/tests/gn_tests.sh
- name: Run Tests with sanitizers
timeout-minutes: 60
env:
LSAN_OPTIONS: detect_leaks=1
run: |
for BUILD_TYPE in asan tsan ubsan; do
case $BUILD_TYPE in
"asan") GN_ARGS='is_clang=true is_asan=true';;
"msan") GN_ARGS='is_clang=true is_msan=true';;
"tsan") GN_ARGS='is_clang=true is_tsan=true chip_enable_wifi=false';;
"ubsan") GN_ARGS='is_clang=true is_ubsan=true';;
esac
rm -rf ./out/sanitizers
BUILD_TYPE=sanitizers scripts/build/gn_gen.sh --args="$GN_ARGS" --export-compile-commands
BUILD_TYPE=sanitizers scripts/tests/gn_tests.sh
done
- name: Ensure codegen is done for sanitize
timeout-minutes: 45
run: |
./scripts/run_in_build_env.sh "./scripts/run_codegen_targets.sh out/sanitizers"
- name: Clang-tidy validation
timeout-minutes: 45
run: |
./scripts/run_in_build_env.sh \
"./scripts/run-clang-tidy-on-compile-commands.py \
--compile-database out/sanitizers/compile_commands.json \
--file-exclude-regex '/(repo|zzz_generated|lwip/standalone)/' \
check \
"
- name: Build using build_examples.py
timeout-minutes: 60
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--target linux-x64-minmdns-ipv6only-clang \
--target linux-x64-rpc-console \
build \
"
- name: Create a pre-generate directory and ensure compile-time codegen would fail
run: |
./scripts/run_in_build_env.sh "./scripts/codepregen.py ./zzz_pregenerated"
mv scripts/codegen.py scripts/codegen.py.renamed
- name: Clean output
run: rm -rf ./out
- name: Build using build_examples.py (pregen)
timeout-minutes: 60
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py \
--target linux-x64-all-clusters-ipv6only-clang \
--target linux-x64-chip-tool-ipv6only-clang \
--pregen-dir ./zzz_pregenerated \
build \
"
- name: Check no code generation in output
run: |
CNT=$(find out -name "CHIPClusters.h" | wc -l)
if [ "${CNT}" != "0" ]; then
echo "ERROR: found unexpected generated files:"
find out -name "CHIPClusters.h"
exit 1
fi
- name: Undo code pre-generation changes (make compile time codegen work again)
run: |
rm -rf ./zzz_pregenerated
mv scripts/codegen.py.renamed scripts/codegen.py
- name: Run fake linux tests with build_examples
timeout-minutes: 15
run: |
./scripts/run_in_build_env.sh \
"./scripts/build/build_examples.py --target linux-fake-tests build"
- name: Uploading core files
uses: actions/upload-artifact@v3
if: ${{ failure() && !env.ACT }}
with:
name: crash-core-linux
path: /tmp/cores/
# Cores are big; don't hold on to them too long.
retention-days: 5
# OBJDIR on linux is > 10K files and takes more than 50 minutes to upload, usually
# having the job timeout.
#
# If re-enabling, some subset of this should be picked
#
# - name: Uploading objdir for debugging
# uses: actions/upload-artifact@v3
# if: ${{ failure() && !env.ACT }}
# with:
# name: crash-objdir-linux
# path: out/
# # objdirs are big; don't hold on to them too long.
# retention-days: 5
build_linux_python_lib:
name: Build on Linux (python_lib)
timeout-minutes: 60
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: connectedhomeip/chip-build:0.7.3
volumes:
- "/tmp/log_output:/tmp/test_logs"
options: --sysctl "net.ipv6.conf.all.disable_ipv6=0
net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
steps:
- name: Dump GitHub context
env:
GITHUB_CONTEXT: ${{ toJSON(github) }}
run: echo "$GITHUB_CONTEXT"
- name: Dump Concurrency context
env:
CONCURRENCY_CONTEXT: ${{ github.ref }}-${{ github.workflow }}-${{ (github.event_name == 'pull_request' && github.event.number) || (github.event_name == 'workflow_dispatch' && github.run_number) || github.sha }}
run: echo "$CONCURRENCY_CONTEXT"
- uses: Wandalen/wretry.action@v1.0.36
name: Checkout
with:
action: actions/checkout@v3
with: |
token: ${{ github.token }}
attempt_limit: 3
attempt_delay: 2000
- name: Checkout submodules
run: scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform linux
- name: Bootstrap cache
uses: actions/cache@v3
timeout-minutes: 10
with:
key: ${{ runner.os }}-env-${{ hashFiles('scripts/setup/*', 'third_party/pigweed/**') }}
path: |
.environment
build_overrides/pigweed_environment.gni
- name: Bootstrap
timeout-minutes: 10
run: bash scripts/bootstrap.sh
- name: Setup Build, Run Build and Run Tests
timeout-minutes: 50
run: |
scripts/build/gn_gen.sh --args="enable_rtti=true enable_pylib=true chip_config_memory_debug_checks=false chip_config_memory_debug_dmalloc=false"
scripts/run_in_build_env.sh "ninja -C ./out"
scripts/tests/gn_tests.sh
- name: Run Python library specific unit tests
timeout-minutes: 5
run: |
scripts/run_in_build_env.sh 'pip3 install ./out/controller/python/chip_core-0.0-cp37-abi3-linux_x86_64.whl'
scripts/run_in_build_env.sh 'pip3 install ./out/controller/python/chip_clusters-0.0-py3-none-any.whl'
scripts/run_in_build_env.sh 'pip3 install ./out/controller/python/chip_repl-0.0-py3-none-any.whl'
scripts/run_in_build_env.sh '(cd src/controller/python/test/unit_tests/ && python3 -m unittest -v)'
- name: Run Python Setup Payload Generator Test
timeout-minutes: 10
run: |
scripts/run_in_build_env.sh 'scripts/examples/gn_build_example.sh examples/chip-tool out/'
scripts/run_in_build_env.sh 'pip3 install -r src/setup_payload/python/requirements.txt'
scripts/run_in_build_env.sh 'python3 src/setup_payload/tests/run_python_setup_payload_gen_test.py out/chip-tool'
build_darwin:
name: Build on Darwin (clang, python_lib, simulated)
timeout-minutes: 200
runs-on: macos-latest
if: github.actor != 'restyled-io[bot]'
steps:
- uses: Wandalen/wretry.action@v1.0.36
name: Checkout
with:
action: actions/checkout@v3
with: |
token: ${{ github.token }}
attempt_limit: 3
attempt_delay: 2000
#- name: Initialize CodeQL
# if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
# uses: github/codeql-action/init@v1
# with:
# languages: "cpp"
- name: Checkout submodules
run: scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform darwin
- name: Try to ensure the directory for diagnostic log collection exists
run: |
mkdir -p ~/Library/Logs/DiagnosticReports || true
- name: Bootstrap cache
uses: actions/cache@v3
timeout-minutes: 10
with:
key: ${{ runner.os }}-env-${{ hashFiles('scripts/setup/*', 'third_party/pigweed/**') }}
path: |
.environment
build_overrides/pigweed_environment.gni
- name: Bootstrap
timeout-minutes: 25
run: bash scripts/bootstrap.sh
- name: Uploading bootstrap logs
uses: actions/upload-artifact@v3
if: ${{ always() && !env.ACT }}
with:
name: bootstrap-logs
path: |
.environment/gn_out/.ninja_log
.environment/pigweed-venv/*.log
- name: Setup and Build Simulated Device
timeout-minutes: 20
run: |
BUILD_TYPE=simulated
GN_ARGS='chip_tests_zap_config="app1" chip_project_config_include_dirs=["../../examples/placeholder/linux/apps/app1/include", "../../config/standalone"] chip_config_network_layer_ble=false'
CHIP_ROOT_PATH=examples/placeholder/linux
CHIP_ROOT_PATH="$CHIP_ROOT_PATH" BUILD_TYPE="$BUILD_TYPE" scripts/build/gn_gen.sh --args="$GN_ARGS"
scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
- name: Setup Build, Run Build and Run Tests
timeout-minutes: 120
# We can't enable leak checking here in LSAN_OPTIONS, because on
# Darwin that's only supported with a new enough clang, and we're
# not building with the pigweed clang here.
run: |
for BUILD_TYPE in default python_lib; do
case $BUILD_TYPE in
# We want to build various standalone example apps
# (similar to what examples-linux-standalone.yaml
# does), so use target_os="all" to get those picked
# up as part of the "unified" build. But then to
# save CI resources we want to exclude the
# "host clang" build, which uses the pigweed
# clang.
"default") GN_ARGS='target_os="all" is_asan=true enable_host_clang_build=false';;
"python_lib") GN_ARGS='enable_rtti=true enable_pylib=true';;
esac
BUILD_TYPE=$BUILD_TYPE scripts/build/gn_gen.sh --args="$GN_ARGS" --export-compile-commands
scripts/run_in_build_env.sh "ninja -C ./out/$BUILD_TYPE"
BUILD_TYPE=$BUILD_TYPE scripts/tests/gn_tests.sh
done
- name: Ensure codegen is done for sanitize
timeout-minutes: 45
run: |
./scripts/run_in_build_env.sh "./scripts/run_codegen_targets.sh out/default"
- name: Clang-tidy validation
timeout-minutes: 45
run: |
./scripts/run_in_build_env.sh \
"./scripts/run-clang-tidy-on-compile-commands.py \
--compile-database out/default/compile_commands.json \
check \
"
- name: Uploading diagnostic logs
uses: actions/upload-artifact@v3
if: ${{ failure() && !env.ACT }}
with:
name: crash-log-darwin
path: ~/Library/Logs/DiagnosticReports/
# - name: Perform CodeQL Analysis
# if: ${{ github.event_name == 'push' && github.event.ref == 'refs/heads/master' }}
# uses: github/codeql-action/analyze@v1
# TODO Log Upload https://github.com/project-chip/connectedhomeip/issues/2227
# TODO https://github.com/project-chip/connectedhomeip/issues/1512
build_linux_gcc_coverage:
name: Build on Linux (coverage)
timeout-minutes: 85
runs-on: ubuntu-latest
if: github.actor != 'restyled-io[bot]'
container:
image: connectedhomeip/chip-build:0.7.3
volumes:
- "/tmp/log_output:/tmp/test_logs"
options: --privileged --sysctl "net.ipv6.conf.all.disable_ipv6=0
net.ipv4.conf.all.forwarding=1 net.ipv6.conf.all.forwarding=1"
steps:
- uses: Wandalen/wretry.action@v1.0.36
name: Checkout
with:
action: actions/checkout@v3
with: |
token: ${{ github.token }}
attempt_limit: 3
attempt_delay: 2000
- name: Checkout submodules
run: scripts/checkout_submodules.py --allow-changing-global-git-config --shallow --platform linux
- name: Bootstrap cache
uses: actions/cache@v3
timeout-minutes: 10
with:
key: ${{ runner.os }}-env-${{ hashFiles('scripts/setup/*', 'third_party/pigweed/**') }}
path: |
.environment
build_overrides/pigweed_environment.gni
- name: Bootstrap
timeout-minutes: 10
run: bash scripts/bootstrap.sh
- name: Uploading bootstrap logs
uses: actions/upload-artifact@v3
if: ${{ always() && !env.ACT }}
with:
name: bootstrap-logs
path: |
.environment/gn_out/.ninja_log
.environment/pigweed-venv/*.log
- name: Run Build Coverage
timeout-minutes: 20
run: ./scripts/build_coverage.sh