examples/all-clusters-app/nxp/mw320/include/CHIPProjectConfig.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /*
  *    Copyright (c) 2020 Project CHIP Authors
  *    Copyright (c) 2020 Google LLC.
  *    All rights reserved.
  *
  *    Licensed under the Apache License, Version 2.0 (the "License");
  *    you may not use this file except in compliance with the License.
  *    You may obtain a copy of the License at
  *
  *        http://www.apache.org/licenses/LICENSE-2.0
  *
  *    Unless required by applicable law or agreed to in writing, software
  *    distributed under the License is distributed on an "AS IS" BASIS,
  *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
  *    See the License for the specific language governing permissions and
  *    limitations under the License.
  */

 /**
  *    @file
  *          Example project configuration file for CHIP.
  *
  *          This is a place to put application or project-specific overrides
  *          to the default configuration values for general CHIP features.
  *
  */

 #pragma once

 #if BUILD_RELEASE // release build

 // Security and Authentication enabled for release build.
 #define CHIP_CONFIG_SECURITY_TEST_MODE 0
 #define CHIP_CONFIG_REQUIRE_AUTH 1

 #else // development build

 // Security and Authentication disabled for development build.
 // For convenience, enable CHIP Security Test Mode and disable the requirement for
 // authentication in various protocols.
 // WARNING: These options make it possible to circumvent basic CHIP security functionality,
 // including message encryption. Because of this they MUST NEVER BE ENABLED IN PRODUCTION BUILDS.
 #define CHIP_CONFIG_SECURITY_TEST_MODE 0
 #define CHIP_CONFIG_REQUIRE_AUTH 1

 /**
  * CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY
  *
  * Enables the use of a hard-coded default CHIP device id and credentials if no device id
  * is found in CHIP NV storage.
  *
  * This option is for testing only and should be disabled in production releases.
  */
 #define CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY 34

 // Use a default pairing code if one hasn't been provisioned in flash.
 #define CHIP_DEVICE_CONFIG_USE_TEST_PAIRING_CODE "CHIPUS"

 /**
  * CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER
  *
  * Enables the use of a hard-coded default serial number if none
  * is found in CHIP NV storage.
  */
 #define CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER "DUMMY_SN"

 #endif // BUILD_RELEASE

 #if (defined(CONFIG_CHIP_MW320_REAL_FACTORY_DATA) && (CONFIG_CHIP_MW320_REAL_FACTORY_DATA == 1))

 // VID/PID for product => will be used by Basic Information Cluster
 #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0x1037
 #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0xA220

 // set it to 0 for the moment
 #define CHIP_DEVICE_CONFIG_ENABLE_DEVICE_INSTANCE_INFO_PROVIDER 0

 #ifndef CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION
 //-> format_version = 1
 //-> vendor_id = 0x1037
 //-> product_id_array = [ 0xA220 ]
 //-> device_type_id = 0x0015
 //-> certificate_id = "ZIG20142ZB330003-24"
 //-> security_level = 0
 //-> security_information = 0
 //-> version_number = 0x2694
 //-> certification_type = 1
 //-> dac_origin_vendor_id is not present
 //-> dac_origin_product_id is not present
 #define CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION                                                                               \
     {                                                                                                                              \
         0x30, 0x81, 0xe7, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x02, 0xa0, 0x81, 0xd9, 0x30, 0x81, 0xd6,    \
             0x02, 0x01, 0x03, 0x31, 0x0d, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30,      \
             0x43, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x01, 0xa0, 0x36, 0x04, 0x34, 0x15, 0x24, 0x00,      \
             0x01, 0x25, 0x01, 0x37, 0x10, 0x36, 0x02, 0x05, 0x20, 0xa2, 0x18, 0x24, 0x03, 0x15, 0x2c, 0x04, 0x13, 0x5a, 0x49,      \
             0x47, 0x32, 0x30, 0x31, 0x34, 0x31, 0x5a, 0x42, 0x33, 0x33, 0x30, 0x30, 0x30, 0x31, 0x2d, 0x32, 0x34, 0x24, 0x05,      \
             0x00, 0x24, 0x06, 0x00, 0x24, 0x07, 0x01, 0x24, 0x08, 0x01, 0x18, 0x31, 0x7d, 0x30, 0x7b, 0x02, 0x01, 0x03, 0x80,      \
             0x14, 0x62, 0xfa, 0x82, 0x33, 0x59, 0xac, 0xfa, 0xa9, 0x96, 0x3e, 0x1c, 0xfa, 0x14, 0x0a, 0xdd, 0xf5, 0x04, 0xf3,      \
             0x71, 0x60, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30, 0x0a, 0x06, 0x08,      \
             0x2a, 0x86, 0x48, 0xce, 0x3d, 0x04, 0x03, 0x02, 0x04, 0x47, 0x30, 0x45, 0x02, 0x20, 0x11, 0x8c, 0x13, 0x63, 0x9a,      \
             0xe7, 0x77, 0xaa, 0xc1, 0x52, 0x8c, 0x46, 0x40, 0x82, 0xcc, 0xdb, 0x6c, 0x43, 0x4d, 0xfc, 0xff, 0xe2, 0x5e, 0x1f,      \
             0xda, 0xef, 0xdf, 0x0d, 0xf1, 0x7c, 0x2c, 0xcd, 0x02, 0x21, 0x00, 0xbf, 0xad, 0x91, 0xc3, 0x3b, 0xf5, 0xb9, 0x89,      \
             0x2e, 0x5e, 0x15, 0x3c, 0x52, 0x61, 0xad, 0xb8, 0x53, 0x42, 0x46, 0xc6, 0x7d, 0xec, 0xc0, 0x93, 0x10, 0x1f, 0xc4,      \
             0xd2, 0xc3, 0x8a, 0xd5, 0x16,                                                                                          \
     }

 // All remaining data will be pulled from the provisioning region of flash.
 #endif

 #else // CONFIG_CHIP_MW320_REAL_FACTORY_DATA

 // Use a default pairing code if one hasn't been provisioned in flash.
 #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
 #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00

 /**
  * CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
  *
  * 0x235A: Chip's Vendor Id.
  * 0xFFF1: Test vendor.
  */
 #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1

 /**
  * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
  *
  * 0xFE00: SDK Sample Lock Resource
  */
 #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8001

 #endif // CONFIG_CHIP_MW320_REAL_FACTORY_DATA

 /**
  * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION
  *
  * The product revision number assigned to device or product by the device vendor.  This
  * number is scoped to the device product id, and typically corresponds to a revision of the
  * physical device, a change to its packaging, and/or a change to its marketing presentation.
  * This value is generally *not* incremented for device software revisions.
  */
 #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION 1
 #define CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_PRODUCT_REVISION 1

 /**
  * CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
  *
  * A string identifying the firmware revision running on the device.
  * CHIP currently expects the firmware version to be in the format
  * {MAJOR_VERSION}.0d{MINOR_VERSION}
  */
 #ifndef CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
 #define CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION 1
 #endif
 /**
  * CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
  *
  * Enable support for CHIP-over-BLE (CHIPOBLE).
  */
 #define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 0

 /**
  * CHIP_CONFIG_MAX_BINDINGS
  *
  * Maximum number of simultaneously active bindings per ChipExchangeManager
  * 1 (Time Sync) + 2 (Two 1-way subscriptions) + 1 (Software Update) = 4
  * in the worst case. Keeping another 4 as buffer.
  */
 #define CHIP_CONFIG_MAX_BINDINGS 6

 /**
  * CHIP_CONFIG_EVENT_LOGGING_WDM_OFFLOAD
  *
  * Select the ability to offload event logs to any interested subscribers using WDM.
  */
 #define CHIP_CONFIG_EVENT_LOGGING_WDM_OFFLOAD 1

 /**
  * CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS
  *
  * Enable recording UTC timestamps.
  */
 #define CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS 1

 /**
  * CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
  *
  * A size, in bytes, of the individual debug event logging buffer.
  */
 #define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)

 /**
  * CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE
  *
  * For a development build, set the default importance of events to be logged as Debug.
  * Since debug is the lowest importance level, this means all standard, critical, info and
  * debug importance level vi events get logged.
  */
 #if BUILD_RELEASE
 #define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Production
 #else
 #define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Debug
 #endif // BUILD_RELEASE

 #define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION 1
	/*
	* Copyright (c) 2020 Project CHIP Authors
	* Copyright (c) 2020 Google LLC.
	* All rights reserved.
	*
	* Licensed under the Apache License, Version 2.0 (the "License");
	* you may not use this file except in compliance with the License.
	* You may obtain a copy of the License at
	*
	* http://www.apache.org/licenses/LICENSE-2.0
	*
	* Unless required by applicable law or agreed to in writing, software
	* distributed under the License is distributed on an "AS IS" BASIS,
	* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
	* See the License for the specific language governing permissions and
	* limitations under the License.
	*/

	/**
	* @file
	* Example project configuration file for CHIP.
	*
	* This is a place to put application or project-specific overrides
	* to the default configuration values for general CHIP features.
	*
	*/

	#pragma once

	#if BUILD_RELEASE // release build

	// Security and Authentication enabled for release build.
	#define CHIP_CONFIG_SECURITY_TEST_MODE 0
	#define CHIP_CONFIG_REQUIRE_AUTH 1

	#else // development build

	// Security and Authentication disabled for development build.
	// For convenience, enable CHIP Security Test Mode and disable the requirement for
	// authentication in various protocols.
	// WARNING: These options make it possible to circumvent basic CHIP security functionality,
	// including message encryption. Because of this they MUST NEVER BE ENABLED IN PRODUCTION BUILDS.
	#define CHIP_CONFIG_SECURITY_TEST_MODE 0
	#define CHIP_CONFIG_REQUIRE_AUTH 1

	/**
	* CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY
	*
	* Enables the use of a hard-coded default CHIP device id and credentials if no device id
	* is found in CHIP NV storage.
	*
	* This option is for testing only and should be disabled in production releases.
	*/
	#define CHIP_DEVICE_CONFIG_ENABLE_TEST_DEVICE_IDENTITY 34

	// Use a default pairing code if one hasn't been provisioned in flash.
	#define CHIP_DEVICE_CONFIG_USE_TEST_PAIRING_CODE "CHIPUS"

	/**
	* CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER
	*
	* Enables the use of a hard-coded default serial number if none
	* is found in CHIP NV storage.
	*/
	#define CHIP_DEVICE_CONFIG_USE_TEST_SERIAL_NUMBER "DUMMY_SN"

	#endif // BUILD_RELEASE

	#if (defined(CONFIG_CHIP_MW320_REAL_FACTORY_DATA) && (CONFIG_CHIP_MW320_REAL_FACTORY_DATA == 1))

	// VID/PID for product => will be used by Basic Information Cluster
	#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0x1037
	#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0xA220

	// set it to 0 for the moment
	#define CHIP_DEVICE_CONFIG_ENABLE_DEVICE_INSTANCE_INFO_PROVIDER 0

	#ifndef CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION
	//-> format_version = 1
	//-> vendor_id = 0x1037
	//-> product_id_array = [ 0xA220 ]
	//-> device_type_id = 0x0015
	//-> certificate_id = "ZIG20142ZB330003-24"
	//-> security_level = 0
	//-> security_information = 0
	//-> version_number = 0x2694
	//-> certification_type = 1
	//-> dac_origin_vendor_id is not present
	//-> dac_origin_product_id is not present
	#define CHIP_DEVICE_CONFIG_CERTIFICATION_DECLARATION \
	{ \
	0x30, 0x81, 0xe7, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x02, 0xa0, 0x81, 0xd9, 0x30, 0x81, 0xd6, \
	0x02, 0x01, 0x03, 0x31, 0x0d, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30, \
	0x43, 0x06, 0x09, 0x2a, 0x86, 0x48, 0x86, 0xf7, 0x0d, 0x01, 0x07, 0x01, 0xa0, 0x36, 0x04, 0x34, 0x15, 0x24, 0x00, \
	0x01, 0x25, 0x01, 0x37, 0x10, 0x36, 0x02, 0x05, 0x20, 0xa2, 0x18, 0x24, 0x03, 0x15, 0x2c, 0x04, 0x13, 0x5a, 0x49, \
	0x47, 0x32, 0x30, 0x31, 0x34, 0x31, 0x5a, 0x42, 0x33, 0x33, 0x30, 0x30, 0x30, 0x31, 0x2d, 0x32, 0x34, 0x24, 0x05, \
	0x00, 0x24, 0x06, 0x00, 0x24, 0x07, 0x01, 0x24, 0x08, 0x01, 0x18, 0x31, 0x7d, 0x30, 0x7b, 0x02, 0x01, 0x03, 0x80, \
	0x14, 0x62, 0xfa, 0x82, 0x33, 0x59, 0xac, 0xfa, 0xa9, 0x96, 0x3e, 0x1c, 0xfa, 0x14, 0x0a, 0xdd, 0xf5, 0x04, 0xf3, \
	0x71, 0x60, 0x30, 0x0b, 0x06, 0x09, 0x60, 0x86, 0x48, 0x01, 0x65, 0x03, 0x04, 0x02, 0x01, 0x30, 0x0a, 0x06, 0x08, \
	0x2a, 0x86, 0x48, 0xce, 0x3d, 0x04, 0x03, 0x02, 0x04, 0x47, 0x30, 0x45, 0x02, 0x20, 0x11, 0x8c, 0x13, 0x63, 0x9a, \
	0xe7, 0x77, 0xaa, 0xc1, 0x52, 0x8c, 0x46, 0x40, 0x82, 0xcc, 0xdb, 0x6c, 0x43, 0x4d, 0xfc, 0xff, 0xe2, 0x5e, 0x1f, \
	0xda, 0xef, 0xdf, 0x0d, 0xf1, 0x7c, 0x2c, 0xcd, 0x02, 0x21, 0x00, 0xbf, 0xad, 0x91, 0xc3, 0x3b, 0xf5, 0xb9, 0x89, \
	0x2e, 0x5e, 0x15, 0x3c, 0x52, 0x61, 0xad, 0xb8, 0x53, 0x42, 0x46, 0xc6, 0x7d, 0xec, 0xc0, 0x93, 0x10, 0x1f, 0xc4, \
	0xd2, 0xc3, 0x8a, 0xd5, 0x16, \
	}

	// All remaining data will be pulled from the provisioning region of flash.
	#endif

	#else // CONFIG_CHIP_MW320_REAL_FACTORY_DATA

	// Use a default pairing code if one hasn't been provisioned in flash.
	#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
	#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00

	/**
	* CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
	*
	* 0x235A: Chip's Vendor Id.
	* 0xFFF1: Test vendor.
	*/
	#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1

	/**
	* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
	*
	* 0xFE00: SDK Sample Lock Resource
	*/
	#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8001

	#endif // CONFIG_CHIP_MW320_REAL_FACTORY_DATA

	/**
	* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION
	*
	* The product revision number assigned to device or product by the device vendor. This
	* number is scoped to the device product id, and typically corresponds to a revision of the
	* physical device, a change to its packaging, and/or a change to its marketing presentation.
	* This value is generally not incremented for device software revisions.
	*/
	#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_REVISION 1
	#define CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_PRODUCT_REVISION 1

	/**
	* CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
	*
	* A string identifying the firmware revision running on the device.
	* CHIP currently expects the firmware version to be in the format
	* {MAJOR_VERSION}.0d{MINOR_VERSION}
	*/
	#ifndef CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION
	#define CHIP_DEVICE_CONFIG_DEVICE_FIRMWARE_REVISION 1
	#endif
	/**
	* CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
	*
	* Enable support for CHIP-over-BLE (CHIPOBLE).
	*/
	#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 0

	/**
	* CHIP_CONFIG_MAX_BINDINGS
	*
	* Maximum number of simultaneously active bindings per ChipExchangeManager
	* 1 (Time Sync) + 2 (Two 1-way subscriptions) + 1 (Software Update) = 4
	* in the worst case. Keeping another 4 as buffer.
	*/
	#define CHIP_CONFIG_MAX_BINDINGS 6

	/**
	* CHIP_CONFIG_EVENT_LOGGING_WDM_OFFLOAD
	*
	* Select the ability to offload event logs to any interested subscribers using WDM.
	*/
	#define CHIP_CONFIG_EVENT_LOGGING_WDM_OFFLOAD 1

	/**
	* CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS
	*
	* Enable recording UTC timestamps.
	*/
	#define CHIP_CONFIG_EVENT_LOGGING_UTC_TIMESTAMPS 1

	/**
	* CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
	*
	* A size, in bytes, of the individual debug event logging buffer.
	*/
	#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)

	/**
	* CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE
	*
	* For a development build, set the default importance of events to be logged as Debug.
	* Since debug is the lowest importance level, this means all standard, critical, info and
	* debug importance level vi events get logged.
	*/
	#if BUILD_RELEASE
	#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Production
	#else
	#define CHIP_CONFIG_EVENT_LOGGING_DEFAULT_IMPORTANCE chip::Profiles::DataManagement::Debug
	#endif // BUILD_RELEASE

	#define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION 1