| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 24.1.5. [TC-CADMIN-1.5] Commissioning window handling timeout and revocation |
| using ECM [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| "1. Provision the DUT_CE (all-cluster-app) device using TH_CR1 (chip-tool ) on the raspi" |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a commissioning window on DUT_CE using a commissioning |
| timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| disabled: true |
| |
| - label: "DNS-SD records shows DUT_CE advertising" |
| verification: | |
| On TH_CR1 send the below command |
| |
| avahi-browse -rt _matterc._udp |
| + eth0 IPv6 B755245DE9E5E186 _matterc._udp local |
| = eth0 IPv6 B755245DE9E5E186 _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = ["PI=" "PH=36" "CM=2" "D=3840" "T=1" "SAI=300" "SII=5000" "VP=65521+32769"] |
| disabled: true |
| |
| - label: |
| "TH_CR2 starts a commissioning process with DUT_CE after |
| PIXIT.CADMIN.CwDuration (that was given in step 2) + 10 seconds" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR2 send the below command |
| |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| |
| ./chip-tool pairing code 2 36177160937 --commissioner-name beta |
| |
| Verify the below message in the TH_CR2(chip-tool) Log: |
| |
| [1663841939.843550][13897:13897] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1663841939.843617][13897:13897] CHIP:DL: Inet Layer shutdown |
| [1663841939.843673][13897:13897] CHIP:DL: BLE shutdown |
| [1663841939.843727][13897:13897] CHIP:DL: System Layer shutdown |
| [1663841939.844009][13897:13897] CHIP:TOO: Run command failure: ../../examples/chip-tool/commands/pairing/PairingCommand.cpp:151: CHIP Error 0x00000003: Incorrect state |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a new commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| disabled: true |
| |
| - label: |
| "TH_CR1 revokes the commissioning window on DUT_CE using |
| RevokeCommissioning command" |
| PICS: CADMIN.S.C02.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning revoke-commissioning 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the Commissioning window is closed in DUT_CE(all-clusters-app) Log |
| |
| [1660901039.590891][3045:3045] CHIP:DMG: AccessControl: allowed |
| [1660901039.590962][3045:3045] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0002 |
| [1660901039.591036][3045:3045] CHIP:ZCL: Received command to close commissioning window |
| [1660901039.591094][3045:3045] CHIP:SVR: Closing pairing window |
| [1660901039.591169][3045:3045] CHIP:IN: SecureSession[0xaaaab010d400]: Released - Type:1 LSID:14411 |
| |
| Verify the success response On TH_CR1(chip-tool) Log |
| |
| [1648115245106] [6681:3894448] CHIP: [DMG] StatusIB = |
| [1648115245106] [6681:3894448] CHIP: [DMG] { |
| [1648115245106] [6681:3894448] CHIP: [DMG] status = 0x0, |
| [1648115245106] [6681:3894448] CHIP: [DMG] }, |
| disabled: true |
| |
| - label: "TH_CR2 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR2 send the below command |
| |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| ./chip-tool pairing code 2 36177160937 --commissioner-name beta |
| |
| verify you got the following message On TH_CR2(chip-tool) Log |
| |
| |
| [1663841939.843550][13897:13897] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1663841939.843617][13897:13897] CHIP:DL: Inet Layer shutdown |
| [1663841939.843673][13897:13897] CHIP:DL: BLE shutdown |
| [1663841939.843727][13897:13897] CHIP:DL: System Layer shutdown |
| [1663841939.844009][13897:13897] CHIP:TOO: Run command failure: ../../examples/chip-tool/commands/pairing/PairingCommand.cpp:151: CHIP Error 0x00000003: Incorrect state |
| disabled: true |
| |
| - label: |
| "TH_CR1 revokes the commissioning window on DUT_CE using |
| RevokeCommissioning command" |
| PICS: CADMIN.S.C02.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning revoke-commissioning 1 0 --timedInteractionTimeoutMs 1000 |
| |
| verify you got the following message On TH_CR1(chip-tool) Log |
| |
| |
| [1650524034.112257][15422:15427] CHIP:DMG: CommandId = 0x2, |
| [1650524034.112345][15422:15427] CHIP:DMG: }, |
| [1650524034.112456][15422:15427] CHIP:DMG: |
| [1650524034.112543][15422:15427] CHIP:DMG: StatusIB = |
| [1650524034.112632][15422:15427] CHIP:DMG: { |
| [1650524034.112727][15422:15427] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650524034.112825][15422:15427] CHIP:DMG: cluster-status = 0x4, |
| [1650524034.112914][15422:15427] CHIP:DMG: }, |
| [1650524034.113005][15422:15427] CHIP:DMG: |
| [1650524034.113084][15422:15427] CHIP:DMG: }, |
| disabled: true |
| |
| - label: |
| "TH_CR1 writes and reads the Basic Information Clusters NodeLabel |
| mandatory attribute of DUT_CE" |
| PICS: BINFO.S.A0005 |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool basicinformation write node-label te5new 1 0 |
| |
| Verify the Success response on the TH_CR1(chip-tool) Log: |
| |
| |
| [1649245940.789388][10110:10115] CHIP:DMG: |
| [1649245940.789454][10110:10115] CHIP:DMG: StatusIB = |
| [1649245940.789519][10110:10115] CHIP:DMG: { |
| [1649245940.789588][10110:10115] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1649245940.789654][10110:10115] CHIP:DMG: }, |
| [1649245940.789719][10110:10115] CHIP:DMG: |
| [1649245940.789778][10110:10115] CHIP:DMG: }, |
| [1649245940.789841][10110:10115] CHIP:DMG: |
| [1649245940.789885][10110:10115] CHIP:DMG: ], |
| [1649245940.789941][10110:10115] CHIP:DMG: |
| [1649245940.789984][10110:10115] CHIP:DMG: InteractionModelRevision = 1 |
| [1649245940.790033][10110:10115] CHIP:DMG: } |
| [1649245940.790167][10110:10115] CHIP:DMG: WriteClient moving to [AwaitingDe] |
| |
| ./chip-tool basicinformation read node-label 1 0 |
| |
| Verify the Nodelabel response on the TH_CR1(chip-tool) Log: |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0028 Attribute 0x0000_0005 DataVersion: 3061847068 |
| [1649245950.006849][10116:10121] CHIP:TOO: NodeLabel: te5new |
| [1649245950.007024][10116:10121] CHIP:EM: Sending Standalone Ack for MessageCounter:12495101 on exchange 24816i |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a new commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM but |
| with wrong PakeVerifier value" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning open-commissioning-window 200 \x06\xc7\x56\xdf\xfc\xd7\x22\x65\x34\x52\xa1\x2d\xcd\x94\x5d\x8c\x54\xda\x2b\x0f\x3c\xbd\x1b\x4d\xc3\xf1\xad\xb2\x23\xae\xb2\x6b\x04\x7c\xd2\x4c\x96\x86\x6f\x97\x9b\x1d\x83\xec\x50\xe2\xb4\xae\x30\xcd\xf2\xfd\xb3\x2b\xd8\xa2\x11\xb8\x37\xdc\x94\xed\xcd\x56\xf4\xd1\x43\x77\x19\x10\x76\xbf\xc5\x9d\x99\xb7\xdd\x30\x53\xef\xd6\xf0\x2c\x44\x34\xf2\xbd 3841 1000 16 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify the status on the TH_CR1(chip-tool) Log: |
| |
| [1656434435.691038][3836:3842] CHIP:DMG: { |
| [1656434435.691119][3836:3842] CHIP:DMG: EndpointId = 0x0, |
| [1656434435.691287][3836:3842] CHIP:DMG: ClusterId = 0x3c, |
| [1656434435.691377][3836:3842] CHIP:DMG: CommandId = 0x0, |
| [1656434435.691456][3836:3842] CHIP:DMG: }, |
| [1656434435.691548][3836:3842] CHIP:DMG: |
| [1656434435.691620][3836:3842] CHIP:DMG: StatusIB = |
| [1656434435.691707][3836:3842] CHIP:DMG: { |
| [1656434435.691788][3836:3842] CHIP:DMG: status = 0x01 (FAILURE), |
| [1656434435.691874][3836:3842] CHIP:DMG: cluster-status = 0x3, |
| [1656434435.691954][3836:3842] CHIP:DMG: }, |
| [1656434435.692041][3836:3842] CHIP:DMG: |
| [1656434435.692112][3836:3842] CHIP:DMG: }, |
| [1656434435.692191][3836:3842] CHIP:DMG: |
| [1656434435.692257][3836:3842] CHIP:DMG: }, |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a new commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens another commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 200 1000 3840 |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| [1656405166.756822][5933:5938] CHIP:DMG: { |
| [1656405166.756927][5933:5938] CHIP:DMG: EndpointId = 0x0, |
| [1656405166.757033][5933:5938] CHIP:DMG: ClusterId = 0x3c, |
| [1656405166.757120][5933:5938] CHIP:DMG: CommandId = 0x0, |
| [1656405166.757222][5933:5938] CHIP:DMG: }, |
| [1656405166.757333][5933:5938] CHIP:DMG: |
| [1656405166.757452][5933:5938] CHIP:DMG: StatusIB = |
| [1656405166.757557][5933:5938] CHIP:DMG: { |
| [1656405166.757641][5933:5938] CHIP:DMG: status = 0x01 (FAILURE), |
| [1656405166.757745][5933:5938] CHIP:DMG: cluster-status = 0x2, |
| [1656405166.757846][5933:5938] CHIP:DMG: }, |
| [1656405166.757929][5933:5938] CHIP:DMG: |
| [1656405166.758014][5933:5938] CHIP:DMG: }, |
| disabled: true |
| |
| - label: "TH_CR2 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR2 send the below command |
| |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| ./chip-tool pairing code 2 36177160937 --commissioner-name beta |
| |
| Verify the below message in the TH_CR2(chip-tool) Log: |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "TH_CR1 tries to revoke the commissioning window on DUT_CE using |
| RevokeCommissioning command" |
| PICS: CADMIN.S.C02.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool administratorcommissioning revoke-commissioning 1 0 --timedInteractionTimeoutMs 1000 |
| |
| Verify that the DUT_CE is rejecting the opening of second commissioning session with the response status 0x01 failure |
| |
| [1656405166.756822][5933:5938] CHIP:DMG: { |
| [1656405166.756927][5933:5938] CHIP:DMG: EndpointId = 0x0, |
| [1656405166.757033][5933:5938] CHIP:DMG: ClusterId = 0x3c, |
| [1656405166.757120][5933:5938] CHIP:DMG: CommandId = 0x0, |
| [1656405166.757222][5933:5938] CHIP:DMG: }, |
| [1656405166.757333][5933:5938] CHIP:DMG: |
| [1656405166.757452][5933:5938] CHIP:DMG: StatusIB = |
| [1656405166.757557][5933:5938] CHIP:DMG: { |
| [1656405166.757641][5933:5938] CHIP:DMG: status = 0x01 (FAILURE), |
| [1656405166.757745][5933:5938] CHIP:DMG: cluster-status = 0x4, |
| [1656405166.757846][5933:5938] CHIP:DMG: }, |
| [1656405166.757929][5933:5938] CHIP:DMG: |
| [1656405166.758014][5933:5938] CHIP:DMG: }, |
| disabled: true |
| |
| - label: "TH_CR3 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR3 send the below command |
| |
| Below is the example when using chip tool as controller (considering 36177160937 as the manual code generated by 1st controller) |
| ./chip-tool pairing code 1 36177160937 --commissioner-name gamma |
| |
| verify you got the following message in the TH_CR3(chip-tool) log |
| CHIP:SC: PASESession timed out while waiting for a response from the peer. Expected message type was 33 |
| CHIP:TOO: Secure Pairing Failed |
| CHIP:TOO: Pairing Failure: ../../third_party/connectedhomeip/src/protocols/secure_channel/PASESession.cpp:324: CHIP Error 0x00000032: Timeout |
| disabled: true |
