blob: d21203edc47941b96f051975a0d2a11373ffe04c [file] [log] [blame]
# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default
name: 84.1.1. [TC-DESC-1.1] Global Attributes with DUT as Server
PICS:
- DESC.S
config:
nodeId: 0x12344321
cluster: "Descriptor"
endpoint: 0
tests:
- label: "Wait for the commissioned device to be retrieved"
cluster: "DelayCommands"
command: "WaitForCommissionee"
arguments:
values:
- name: "nodeId"
value: nodeId
- label: "Read the global attribute: ClusterRevision"
PICS: DESC.S.Afffd
command: "readAttribute"
attribute: "ClusterRevision"
response:
value: 1
constraints:
type: int16u
- label: "Read the global attribute: FeatureMap"
PICS: DESC.S.Afffc
command: "readAttribute"
attribute: "FeatureMap"
response:
value: 0
constraints:
type: bitmap32
- label: "Read the global attribute: AttributeList"
PICS: DESC.S.Afffb
command: "readAttribute"
attribute: "AttributeList"
response:
constraints:
type: list
contains: [0, 1, 2, 3, 65528, 65529, 65530, 65531, 65532, 65533]
#List values range check support https://github.com/project-chip/connectedhomeip/issues/26570
- label:
"TH reads AttributeList attribute from DUT. 1.The list SHALL NOT
contain any additional values in the standard or scoped range:
(0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE). 2.The
list MAY contain values in the Manufacturer Extensible Identifier
(MEI) range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed
MEI range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list
SHALL NOT contain any values in the Test Vendor or invalid range:
(0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 -
0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the
allowed MEI range (0x0001 - 0xFFF1)"
verification: |
./chip-tool descriptor read attribute-list 1 0
Verify " AttributeList "contains all mandatory attributes (values 0x0000,0x0001,0x0002,0x0003) and global attributes values (65528, 65529, 65530, 65531, 65532, 65533) on the TH(Chip-tool) and below is the example log provided for raspi platform:
[1676280023.477099][3892:3894] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001D Attribute 0x0000_FFFB DataVersion: 1306886868
[1676280023.477181][3892:3894] CHIP:TOO: AttributeList: 10 entries
[1676280023.477223][3892:3894] CHIP:TOO: [1]: 0
[1676280023.477251][3892:3894] CHIP:TOO: [2]: 1
[1676280023.477269][3892:3894] CHIP:TOO: [3]: 2
[1676280023.477284][3892:3894] CHIP:TOO: [4]: 3
[1676280023.477298][3892:3894] CHIP:TOO: [5]: 65528
[1676280023.477313][3892:3894] CHIP:TOO: [6]: 65529
[1676280023.477327][3892:3894] CHIP:TOO: [7]: 65530
[1676280023.477342][3892:3894] CHIP:TOO: [8]: 65531
[1676280023.477356][3892:3894] CHIP:TOO: [9]: 65532
[1676280023.477370][3892:3894] CHIP:TOO: [10]: 65533
cluster: "LogCommands"
command: "UserPrompt"
PICS: PICS_USER_PROMPT && DESC.S.Afffb
arguments:
values:
- name: "message"
value: "Please enter 'y' for success"
- name: "expectedValue"
value: "y"
- label:
"TH reads EventList attribute from DUT. 1.The list MAY contain values
in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 -
0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1),
these values SHALL be ignored. 2.The list SHALL NOT contain any values
in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF),
(0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where
XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
verification: |
./chip-tool descriptor read event-list 1 0
Verify "EventList" is empty on the TH(Chip-tool) and below is the example log provided for raspi platform:
[1676366852.531123][9747:9749] CHIP:DMG: }
[1676366852.531291][9747:9749] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001D Attribute 0x0000_FFFA DataVersion: 2384113486
[1676366852.531334][9747:9749] CHIP:TOO: EventList: 0 entries
cluster: "LogCommands"
command: "UserPrompt"
PICS: PICS_USER_PROMPT && DESC.S.Afffa
arguments:
values:
- name: "message"
value: "Please enter 'y' for success"
- name: "expectedValue"
value: "y"
- label:
"TH reads AcceptedCommandList attribute from DUT. 1.The list MAY
contain values in the Manufacturer Extensible Identifier (MEI) range:
(0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range
(0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT
contain any values in the Test Vendor or invalid range: (0x0000_0100 -
0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 -
0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
verification: |
./chip-tool descriptor read accepted-command-list 1 0
Verify "AcceptedCommandList" is empty on the TH(Chip-tool) and below is the example log provided for raspi platform:
[1649425400.031333][3493:3498] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001D Attribute 0x0000_FFF9 DataVersion: 3183189461
[1649425400.031430][3493:3498] CHIP:TOO: AcceptedCommandList: 0 entries
cluster: "LogCommands"
command: "UserPrompt"
PICS: PICS_USER_PROMPT && DESC.S.Afff9
arguments:
values:
- name: "message"
value: "Please enter 'y' for success"
- name: "expectedValue"
value: "y"
- label:
"TH reads GeneratedCommandList attribute from DUT. 1.The list MAY
contain values in the Manufacturer Extensible Identifier (MEI) range:
(0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range
(0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT
contain any values in the Test Vendor or invalid range: (0x0000_0100 -
0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 -
0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)"
verification: |
./chip-tool descriptor read generated-command-list 1 0
Verify "GeneratedCommandList" is empty on the TH(Chip-tool) and below is the example log provided for raspi platform:
[1649425614.161996][3509:3514] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_001D Attribute 0x0000_FFF8 DataVersion: 3183189461
[1649425614.162088][3509:3514] CHIP:TOO: GeneratedCommandList: 0 entries
cluster: "LogCommands"
command: "UserPrompt"
PICS: PICS_USER_PROMPT && DESC.S.Afff8
arguments:
values:
- name: "message"
value: "Please enter 'y' for success"
- name: "expectedValue"
value: "y"