| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 44.1.1. [TC-DGSW-1.1] Global Attributes with DUT as Server |
| |
| PICS: |
| - DGSW.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Software Diagnostics" |
| endpoint: 0 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "TH reads the ClusterRevision from DUT" |
| PICS: DGSW.S.Afffd |
| command: "readAttribute" |
| attribute: "ClusterRevision" |
| response: |
| value: 1 |
| constraints: |
| type: int16u |
| |
| - label: "TH reads the FeatureMap from DUT" |
| PICS: " !DGSW.S.F00 && DGSW.S.Afffc" |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| value: 0 |
| constraints: |
| type: bitmap32 |
| |
| - label: |
| "Given DGSW.S.F00(Watermarks) ensure featuremap has the correct bit |
| set" |
| PICS: DGSW.S.F00 && DGSW.S.Afffc |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |
| |
| - label: "TH reads AttributeList from DUT" |
| PICS: DGSW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [65528, 65529, 65530, 65531, 65532, 65533] |
| |
| - label: "TH reads optional attribute(ThreadMetrics) in AttributeList" |
| PICS: DGSW.S.A0000 && DGSW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [0] |
| |
| - label: "TH reads optional attribute(CurrentHeapFree) in AttributeList" |
| PICS: DGSW.S.A0001 && DGSW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [1] |
| |
| - label: "TH reads optional attribute(CurrentHeapUsed) in AttributeList" |
| PICS: DGSW.S.A0002 && DGSW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [2] |
| |
| - label: |
| "TH reads Feature dependent attribute(CurrentHeapHighWatermark) in |
| AttributeList" |
| PICS: ( DGSW.S.F00 || DGSW.S.A0003 ) && DGSW.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [3] |
| |
| #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570 |
| - label: |
| "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE) 2.The list |
| MAY contain values in the Manufacturer Extensible Identifier (MEI) |
| range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed MEI |
| range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list |
| SHALL NOT contain any values in the Test Vendor or invalid range: |
| (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool softwarediagnostics read attribute-list 1 0 |
| |
| Verify a list of supported attributes in TH(chip-tool) Log |
| Below is the example value which is observed in the RPI platform the value may be differ based on the dut implementation. |
| |
| [1676280804.650422][4258:4260] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFFB DataVersion: 2742393629 |
| [1676280804.650447][4258:4260] CHIP:TOO: AttributeList: 10 entries |
| [1676280804.650456][4258:4260] CHIP:TOO: [1]: 0 |
| [1676280804.650464][4258:4260] CHIP:TOO: [2]: 1 |
| [1676280804.650471][4258:4260] CHIP:TOO: [3]: 2 |
| [1676280804.650478][4258:4260] CHIP:TOO: [4]: 3 |
| [1676280804.650485][4258:4260] CHIP:TOO: [5]: 65528 |
| [1676280804.650493][4258:4260] CHIP:TOO: [6]: 65529 |
| [1676280804.650500][4258:4260] CHIP:TOO: [7]: 65530 |
| [1676280804.650507][4258:4260] CHIP:TOO: [8]: 65531 |
| [1676280804.650514][4258:4260] CHIP:TOO: [9]: 65532 |
| [1676280804.650522][4258:4260] CHIP:TOO: [10]: 65533 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DGSW.S.Afffb |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "TH reads EventList from DUT" |
| PICS: DGSW.S.F00 && DGSW.S.Afffa |
| command: "readAttribute" |
| attribute: "EventList" |
| response: |
| constraints: |
| type: list |
| contains: [0] |
| |
| - label: "TH reads EventList from DUT" |
| PICS: " !DGSW.S.F00 && DGSW.S.Afffa " |
| command: "readAttribute" |
| attribute: "EventList" |
| response: |
| value: [] |
| constraints: |
| type: list |
| |
| - label: |
| "TH reads EventList attribute from DUT. 1.The list MAY contain values |
| in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored. 2.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool softwarediagnostics read event-list 1 0 |
| |
| |
| [1676459464.108583][25294:25296] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFFA DataVersion: 650337896 |
| [1676459464.108607][25294:25296] CHIP:TOO: EventList: 1 entries |
| [1676459464.108612][25294:25296] CHIP:TOO: [1]: 0 |
| [1676459464.108635][25294:25296] CHIP:EM: <<< [E:23624i S:46243 M:182610763 (Ack:167177651)] (S) Msg TX to 1:0000000000000001 [110F] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1676459464.108640][25294:25296] CHIP:IN: (S) Sending msg 182610763 on secure session with LSID: 46243 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DGSW.S.Afffa |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "TH reads AcceptedCommandList from DUT" |
| PICS: DGSW.S.F00 && DGSW.S.Afff9 |
| command: "readAttribute" |
| attribute: "AcceptedCommandList" |
| response: |
| constraints: |
| type: list |
| contains: [0] |
| |
| - label: "TH reads AcceptedCommandList from DUT" |
| PICS: " !DGSW.S.F00 && DGSW.S.Afff9" |
| command: "readAttribute" |
| attribute: "AcceptedCommandList" |
| response: |
| value: [] |
| constraints: |
| type: list |
| |
| - label: |
| "TH reads AcceptedCommandList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_00FF). 2.The list MAY contain values in the |
| Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored.3.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool softwarediagnostics read accepted-command-list 1 0 |
| |
| Verify a list of Accepted Command that DUT implemented in TH(chip-tool) Log, This list SHALL have one entry and its value of 0 if WTRMRK feature is supported by DUT. |
| |
| [1651787861.534707][241117:241122] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFF9 DataVersion: 1343666373 |
| [1651787861.534769][241117:241122] CHIP:TOO: AcceptedCommandList: 1 entries |
| [1651787861.534793][241117:241122] CHIP:TOO: [1]: 0 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DGSW.S.Afff9 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool softwarediagnostics read generated-command-list 1 0 |
| |
| Verify a list of Generated Command, this list SHALL be empty in TH(chip-tool) Log |
| |
| [1651787918.020673][241128:241133] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0034 Attribute 0x0000_FFF8 DataVersion: 1343666373 |
| [1651787918.020734][241128:241133] CHIP:TOO: GeneratedCommandList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && DGSW.S.Afff8 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
