| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 36.1.1. [TC-PRS-1.1] Global attributes with server as DUT |
| |
| PICS: |
| - PRS.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Pressure Measurement" |
| endpoint: 1 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Read the global attribute: ClusterRevision" |
| PICS: PRS.S.Afffd |
| command: "readAttribute" |
| attribute: "ClusterRevision" |
| response: |
| value: 3 |
| constraints: |
| type: int16u |
| |
| - label: "Read the global attribute: FeatureMap" |
| PICS: PRS.S.Afffc && !PRS.S.F00 |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| value: 0 |
| constraints: |
| type: bitmap32 |
| |
| - label: "Given PRS.S.F00(EXT) ensure featuremap has the correct bit set" |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| PICS: PRS.S.F00 && PRS.S.Afffc |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |
| |
| - label: "Read the global mandatory attribute: AttributeList" |
| PICS: PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [0, 1, 2, 65528, 65529, 65530, 65531, 65532, 65533] |
| |
| - label: "Read the optional attribute(ScaledValue) in AttributeList" |
| PICS: PRS.S.A0010 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [16] |
| |
| - label: "Read the optional attribute(MinScaledValue) in AttributeList" |
| PICS: PRS.S.A0011 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [17] |
| |
| - label: "Read the optional attribute(MaxScaledValue) in AttributeList" |
| PICS: PRS.S.A0012 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [18] |
| |
| - label: "Read the optional attribute(Scale) in AttributeList" |
| PICS: PRS.S.A0014 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [20] |
| |
| - label: "Read the optional attribute(Tolerance) in AttributeList" |
| PICS: PRS.S.A0003 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [3] |
| |
| - label: "Read the optional attribute(ScaledTolerance) in AttributeList" |
| PICS: PRS.S.A0013 && PRS.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [19] |
| |
| #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570 |
| - label: |
| "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE). 2.The |
| list MAY contain values in the Manufacturer Extensible Identifier |
| (MEI) range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed |
| MEI range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list |
| SHALL NOT contain any values in the Test Vendor or invalid range: |
| (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool pressuremeasurement read attribute-list 1 1 |
| |
| verify DUT responds "AttributeList " which is containing all mandatory attributes(0, 1, 2) and global attributes (65528,65529,65530,65531,65532,65533) and if DUT supports it lists optional attribute (3, 16, 17, 18, 19, 20)on the TH(Chip-tool) Log |
| |
| [1676289596.056210][4588:4590] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0403 Attribute 0x0000_FFFB DataVersion: 2769469539 |
| [1676289596.056315][4588:4590] CHIP:TOO: AttributeList: 9 entries |
| [1676289596.056346][4588:4590] CHIP:TOO: [1]: 0 |
| [1676289596.056372][4588:4590] CHIP:TOO: [2]: 1 |
| [1676289596.056398][4588:4590] CHIP:TOO: [3]: 2 |
| [1676289596.056423][4588:4590] CHIP:TOO: [4]: 65528 |
| [1676289596.056449][4588:4590] CHIP:TOO: [5]: 65529 |
| [1676289596.056474][4588:4590] CHIP:TOO: [6]: 65530 |
| [1676289596.056499][4588:4590] CHIP:TOO: [7]: 65531 |
| [1676289596.056524][4588:4590] CHIP:TOO: [8]: 65532 |
| [1676289596.056550][4588:4590] CHIP:TOO: [9]: 65533 |
| [1676289596.056791][4588:4590] CHIP:EM: <<< [E:36844i M:6918347 (Ack:1600359)] (S) Msg TX to 1:000000000000 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && PRS.S.Afffb |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads EventList attribute from DUT. 1.The list MAY contain values |
| in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored. 2.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool pressuremeasurement read event-list 1 1 |
| |
| |
| Verify " EventList attribute " consists the list of supported events, which for this cluster should be an empty list on the TH(Chip-tool) Log: |
| |
| [1676465567.401932][27872:27874] CHIP:DMG: } |
| [1676465567.402017][27872:27874] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0403 Attribute 0x0000_FFFA DataVersion: 2692357783 |
| [1676465567.402058][27872:27874] CHIP:TOO: EventList: 0 entries |
| [1676465567.402115][27872:27874] CHIP:EM: <<< [E:42541i S:49177 M:241708356 (Ack:116297335)] (S) Msg TX to 1:0000000000000001 [110F] --- Type 0000:10 (SecureChannel:StandaloneAck) |
| [1676465567.402128][27872:27874] CHIP:IN: (S) Sending msg 241708356 on secure session with LSID: 49177 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && PRS.S.Afffa |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads AcceptedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool pressuremeasurement read accepted-command-list 1 1 |
| |
| Verify "AcceptedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no accepted command on the TH(Chip-tool) Log: |
| |
| Verify response: |
| [1650367843.973086][4114:4119] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0403 Attribute 0x0000_FFF9 DataVersion: 2248280323 |
| [1650367843.973242][4114:4119] CHIP:TOO: AcceptedCommandList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && PRS.S.Afff9 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool pressuremeasurement read generated-command-list 1 1 |
| |
| Verify " GeneratedCommandList " consists the list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no generated command on the TH(Chip-tool) Log: |
| |
| Verify response: |
| [1650367913.285053][4120:4125] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0403 Attribute 0x0000_FFF8 DataVersion: 2248280323 |
| [1650367913.285193][4120:4125] CHIP:TOO: GeneratedCommandList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && PRS.S.Afff8 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
