| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: 3.2.4. [TC-ACT-3.2] Functionality with client as DUT |
| |
| PICS: |
| - ACT.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| For DUT as client test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: |
| "Preparation: TH as server exposes an Actions server cluster on EP 1, |
| with one action (supporting all possible commands) and corresponding |
| ActionLists and EndpointLists attributes: ActionList: contains one |
| list element (ActionListStruct): ActionIO = 0x1001 Name = some |
| test Type = other EndpointListID = 0xE001 SupportedCommands = |
| 0x0fff // suppports all commands State = Inactive EndpointLists: |
| contains one list element (EndpointListStruct): EndpointListID = |
| 0xE001 Name = test room Type = room Endpoints = [3] |
| SetupURL: (empty string)" |
| verification: | |
| pre-condition : |
| Please use the below chip-tool commmands as example on how this TC can be performed using chip-tool. The DUT vendor to use commands per the DUT implemetnation |
| |
| 1. First read action-list by following command |
| |
| ./chip-tool actions read action-list 1 1 |
| |
| [1662053538.864044][37149:37154] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0025 Attribute 0x0000_0000 DataVersion: 3676955533 |
| [1662053538.864116][37149:37154] CHIP:TOO: ActionList: 2 entries |
| [1662053538.864180][37149:37154] CHIP:TOO: [1]: { |
| [1662053538.864202][37149:37154] CHIP:TOO: ActionID: 4097 |
| [1662053538.864221][37149:37154] CHIP:TOO: Name: Room 1 On |
| [1662053538.864240][37149:37154] CHIP:TOO: Type: 3 |
| [1662053538.864259][37149:37154] CHIP:TOO: EndpointListID: 57345 |
| [1662053538.864276][37149:37154] CHIP:TOO: SupportedCommands: 1 |
| [1662053538.864295][37149:37154] CHIP:TOO: State: 0 |
| [1662053538.864313][37149:37154] CHIP:TOO: } |
| [1662053538.864342][37149:37154] CHIP:TOO: [2]: { |
| [1662053538.864360][37149:37154] CHIP:TOO: ActionID: 4098 |
| [1662053538.864377][37149:37154] CHIP:TOO: Name: Turn On Room 2 |
| [1662053538.864395][37149:37154] CHIP:TOO: Type: 3 |
| [1662053538.864413][37149:37154] CHIP:TOO: EndpointListID: 57346 |
| [1662053538.864431][37149:37154] CHIP:TOO: SupportedCommands: 1 |
| [1662053538.864449][37149:37154] CHIP:TOO: State: 0 |
| [1662053538.864466][37149:37154] CHIP:TOO: } |
| |
| 2. Use the above obtained ActionID to verify the following commands |
| ./chip-tool actions instant-action 4097 1 1 |
| disabled: true |
| |
| - label: "DUT issues an InstantAction command to TH" |
| PICS: ACT.C.C00.Tx |
| verification: | |
| ./chip-tool actions instant-action 4097 1 1 |
| |
| Verify command is successfully sent on TH(bridge-app) |
| |
| [1658848801.832452][10096:10101] CHIP:EM: Removed CHIP MessageCounter:163269462 from RetransTable on exchange 54295i |
| [1658848801.832487][10096:10101] CHIP:DMG: ICR moving to [ResponseRe] |
| [1658848801.832544][10096:10101] CHIP:DMG: InvokeResponseMessage = |
| [1658848801.832574][10096:10101] CHIP:DMG: { |
| [1658848801.832603][10096:10101] CHIP:DMG: suppressResponse = false, |
| [1658848801.832637][10096:10101] CHIP:DMG: InvokeResponseIBs = |
| [1658848801.832675][10096:10101] CHIP:DMG: [ |
| [1658848801.832705][10096:10101] CHIP:DMG: InvokeResponseIB = |
| [1658848801.832744][10096:10101] CHIP:DMG: { |
| [1658848801.832775][10096:10101] CHIP:DMG: CommandStatusIB = |
| [1658848801.832813][10096:10101] CHIP:DMG: { |
| [1658848801.832849][10096:10101] CHIP:DMG: CommandPathIB = |
| [1658848801.832890][10096:10101] CHIP:DMG: { |
| [1658848801.832931][10096:10101] CHIP:DMG: EndpointId = 0x1, |
| [1658848801.832972][10096:10101] CHIP:DMG: ClusterId = 0x25, |
| [1658848801.833017][10096:10101] CHIP:DMG: CommandId = 0x0, |
| [1658848801.833055][10096:10101] CHIP:DMG: }, |
| [1658848801.833100][10096:10101] CHIP:DMG: |
| [1658848801.833133][10096:10101] CHIP:DMG: StatusIB = |
| [1658848801.833176][10096:10101] CHIP:DMG: { |
| [1658848801.833217][10096:10101] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1658848801.833256][10096:10101] CHIP:DMG: }, |
| [1658848801.833292][10096:10101] CHIP:DMG: |
| [1658848801.833326][10096:10101] CHIP:DMG: }, |
| [1658848801.833371][10096:10101] CHIP:DMG: |
| [1658848801.833402][10096:10101] CHIP:DMG: }, |
| [1658848801.833438][10096:10101] CHIP:DMG: |
| [1658848801.833466][10096:10101] CHIP:DMG: ], |
| [1658848801.833502][10096:10101] CHIP:DMG: |
| [1658848801.833530][10096:10101] CHIP:DMG: InteractionModelRevision = 1 |
| [1658848801.833559][10096:10101] CHIP:DMG: }, |
| [1658848801.833627][10096:10101] CHIP:DMG: Received Command Response Status for Endpoint=1 Cluster=0x0000_0025 Command=0x0000_0000 Status=0x0 |
| [1658848801.833676][10096:10101] CHIP:DMG: ICR moving to [AwaitingDe] |
| [1658848801.833742][10096:10101] CHIP:EM: Sending Standalone Ack for MessageCounter:266293997 on exchange 54295i |
| disabled: true |
| |
| - label: "DUT issues an StartAction command to TH" |
| PICS: ACT.C.C02.Tx |
| verification: | |
| ./chip-tool actions start-action 0 1 1 |
| |
| Note: Message log similar as in step 1 |
| disabled: true |
| |
| - label: "DUT issues an StopAction command to TH" |
| PICS: ACT.C.C04.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an PauseAction command to TH" |
| PICS: ACT.C.C05.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an ResumeAction command to TH" |
| PICS: ACT.C.C07.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an EnableAction command to TH" |
| PICS: ACT.C.C08.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an DisableAction command to TH" |
| PICS: ACT.C.C0a.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an StartActionWithDuration command to TH" |
| PICS: ACT.C.C03.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an PauseActionWithDuration command to TH" |
| PICS: ACT.C.C06.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an EnableActionWithDuration command to TH" |
| PICS: ACT.C.C09.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an DisableActionWithDuration command to TH" |
| PICS: ACT.C.C0b.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |
| |
| - label: "DUT issues an InstantActionWithTransition command to TH" |
| PICS: ACT.C.C01.Tx |
| verification: | |
| Out of scope for V1.0, The reference app doesn"t have implementation for this command |
| disabled: true |