examples/platform/silabs/efr32/rs911x/sl_wlan_config.h

/*
 *
 *    Copyright (c) 2022 Project CHIP Authors
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *    http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

#ifndef RSI_CONFIG_H
#define RSI_CONFIG_H

#include "ble_config.h"
#include "sl_wifi_device.h"

//! Enable feature
#define RSI_ENABLE 1
//! Disable feature
#define RSI_DISABLE 0

static const sl_wifi_device_configuration_t config = {
    .boot_option = LOAD_NWP_FW,
    .mac_address = NULL,
    .band        = SL_SI91X_WIFI_BAND_2_4GHZ,
    .region_code = US,
    .boot_config = { .oper_mode = SL_SI91X_CLIENT_MODE,
                     .coex_mode = SL_SI91X_WLAN_BLE_MODE,
                     .feature_bit_map =
#ifdef SLI_SI91X_MCU_INTERFACE
                         (SL_SI91X_FEAT_SECURITY_OPEN | SL_SI91X_FEAT_WPS_DISABLE),
#else
                         (SL_SI91X_FEAT_SECURITY_OPEN | SL_SI91X_FEAT_AGGREGATION),
#endif
                     .tcp_ip_feature_bit_map = (SL_SI91X_TCP_IP_FEAT_DHCPV4_CLIENT | SL_SI91X_TCP_IP_FEAT_DNS_CLIENT |
                                                SL_SI91X_TCP_IP_FEAT_SSL | SL_SI91X_TCP_IP_FEAT_BYPASS
#ifdef ipv6_FEATURE_REQUIRED
                                                | SL_SI91X_TCP_IP_FEAT_DHCPV6_CLIENT | SL_SI91X_TCP_IP_FEAT_IPV6
#endif
                                                | SL_SI91X_TCP_IP_FEAT_ICMP | SL_SI91X_TCP_IP_FEAT_EXTENSION_VALID),
                     .custom_feature_bit_map     = (SL_SI91X_CUSTOM_FEAT_EXTENTION_VALID | RSI_CUSTOM_FEATURE_BIT_MAP),
                     .ext_custom_feature_bit_map = (
#ifdef SLI_SI917
                         (RSI_EXT_CUSTOM_FEATURE_BIT_MAP)
#else // defaults
#ifdef SLI_SI91X_MCU_INTERFACE
                         (SL_SI91X_EXT_FEAT_256K_MODE | RSI_EXT_CUSTOM_FEATURE_BIT_MAP)
#else
                         (SL_SI91X_EXT_FEAT_384K_MODE | RSI_EXT_CUSTOM_FEATURE_BIT_MAP)
#endif
#endif
                         | (SL_SI91X_EXT_FEAT_BT_CUSTOM_FEAT_ENABLE)
#if (defined A2DP_POWER_SAVE_ENABLE)
                         | SL_SI91X_EXT_FEAT_XTAL_CLK_ENABLE(2)
#endif
                             ),
                     .bt_feature_bit_map = (RSI_BT_FEATURE_BITMAP
#if (RSI_BT_GATT_ON_CLASSIC)
                                            | SL_SI91X_BT_ATT_OVER_CLASSIC_ACL /* to support att over classic acl link */
#endif
                                            ),
#ifdef RSI_PROCESS_MAX_RX_DATA
                     .ext_tcp_ip_feature_bit_map =
                         (RSI_EXT_TCPIP_FEATURE_BITMAP | SL_SI91X_CONFIG_FEAT_EXTENTION_VALID | SL_SI91X_EXT_TCP_MAX_RECV_LENGTH),
#else
                     .ext_tcp_ip_feature_bit_map = (RSI_EXT_TCPIP_FEATURE_BITMAP | SL_SI91X_CONFIG_FEAT_EXTENTION_VALID),
#endif
                     //! ENABLE_BLE_PROTOCOL in bt_feature_bit_map
                     .ble_feature_bit_map =
                         ((SL_SI91X_BLE_MAX_NBR_PERIPHERALS(RSI_BLE_MAX_NBR_PERIPHERALS) |
                           SL_SI91X_BLE_MAX_NBR_CENTRALS(RSI_BLE_MAX_NBR_CENTRALS) |
                           SL_SI91X_BLE_MAX_NBR_ATT_SERV(RSI_BLE_MAX_NBR_ATT_SERV) |
                           SL_SI91X_BLE_MAX_NBR_ATT_REC(RSI_BLE_MAX_NBR_ATT_REC)) |
                          SL_SI91X_FEAT_BLE_CUSTOM_FEAT_EXTENTION_VALID | SL_SI91X_BLE_PWR_INX(RSI_BLE_PWR_INX) |
                          SL_SI91X_BLE_PWR_SAVE_OPTIONS(RSI_BLE_PWR_SAVE_OPTIONS) | SL_SI91X_916_BLE_COMPATIBLE_FEAT_ENABLE
#if RSI_BLE_GATT_ASYNC_ENABLE
                          | SL_SI91X_BLE_GATT_ASYNC_ENABLE
#endif
                          ),

                     .ble_ext_feature_bit_map = ((SL_SI91X_BLE_NUM_CONN_EVENTS(RSI_BLE_NUM_CONN_EVENTS) |
                                                  SL_SI91X_BLE_NUM_REC_BYTES(RSI_BLE_NUM_REC_BYTES))
#if RSI_BLE_INDICATE_CONFIRMATION_FROM_HOST
                                                 | SL_SI91X_BLE_INDICATE_CONFIRMATION_FROM_HOST // indication response from app
#endif
#if RSI_BLE_MTU_EXCHANGE_FROM_HOST
                                                 | SL_SI91X_BLE_MTU_EXCHANGE_FROM_HOST // MTU Exchange request initiation from app
#endif
#if RSI_BLE_SET_SCAN_RESP_DATA_FROM_HOST
                                                 | (SL_SI91X_BLE_SET_SCAN_RESP_DATA_FROM_HOST) // Set SCAN Resp Data from app
#endif
#if RSI_BLE_DISABLE_CODED_PHY_FROM_HOST
                                                 | (SL_SI91X_BLE_DISABLE_CODED_PHY_FROM_HOST) // Disable Coded PHY from app
#endif
#if BLE_SIMPLE_GATT
                                                 | SL_SI91X_BLE_GATT_INIT
#endif
                                                 ),
                     .config_feature_bit_map = (SL_SI91X_FEAT_SLEEP_GPIO_SEL_BITMAP | RSI_CONFIG_FEATURE_BITMAP) }
};

#endif