| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 217.2.3. [TC-REFALM-2.3] Local suppression of the door alarm with DUT as |
| Server |
| |
| PICS: |
| - REFALM.S |
| - REFALM.S.M.LocalSuppress |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Refrigerator Alarm" |
| endpoint: 1 |
| PIXIT.REFALM.AlarmThreshold: |
| type: int16u |
| defaultValue: 5 |
| |
| tests: |
| - label: |
| "Step 1: Commission DUT to TH (can be skipped if done in a preceding |
| test)" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Step 2: Ensure that the door on the DUT is closed" |
| verification: | |
| Ensure that the door on the DUT is closed |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 3:TH reads from the DUT the State attribute" |
| command: "readAttribute" |
| attribute: "State" |
| PICS: REFALM.S.A0002 |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksClear: [0x1] |
| |
| - label: "Step 4:TH reads from the DUT the Mask attribute" |
| command: "readAttribute" |
| attribute: "Mask" |
| PICS: REFALM.S.A0000 |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |
| |
| - label: "Step 5: Manually open the door on the DUT" |
| verification: | |
| Manually open the door on the DUT |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 6: Wait for the time defined in PIXIT.REFALM.AlarmThreshold" |
| cluster: "DelayCommands" |
| PICS: PICS_USER_PROMPT |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: PIXIT.REFALM.AlarmThreshold * 1000 |
| |
| - label: "Step 7:TH reads from the DUT the State attribute" |
| command: "readAttribute" |
| attribute: "State" |
| PICS: REFALM.S.A0002 && PICS_USER_PROMPT |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |
| |
| - label: |
| "Step 8: Invoke the on DUT sequence to suppress the alarm, do not |
| close the door" |
| verification: | |
| Invoke the on DUT sequence to suppress the alarm, do not close the door |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 9:TH reads from the DUT the State attribute" |
| command: "readAttribute" |
| attribute: "State" |
| PICS: REFALM.S.A0002 && PICS_USER_PROMPT |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksClear: [0x1] |
| |
| - label: "Step 10:TH reads from the DUT the Mask attribute" |
| command: "readAttribute" |
| attribute: "Mask" |
| PICS: REFALM.S.A0000 && PICS_USER_PROMPT |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksClear: [0x1] |
| |
| - label: "Step 11:TH reads from the DUT the Supported attribute" |
| command: "readAttribute" |
| attribute: "Supported" |
| PICS: REFALM.S.A0003 && PICS_USER_PROMPT |
| response: |
| constraints: |
| type: bitmap32 |
| hasMasksSet: [0x1] |