| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: |
| 24.1.10. [TC-CADMIN-1.10] Device exit commissioning mode after 20 failed |
| commission attempts [BCM] [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| - CADMIN.S.F00 |
| |
| config: |
| nodeId: 0x12344321 |
| timeout: 700 |
| nodeIdForDuplicateCommissioning: |
| type: node_id |
| defaultValue: 0x11 |
| nodeId2: |
| type: node_id |
| defaultValue: 0xCAFE |
| nodeId3: |
| type: node_id |
| defaultValue: 0xC00FEE |
| endpoint: 0 |
| waitAfterCommissioning: |
| type: int16u |
| defaultValue: 5000 |
| correctPayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00KA0648G00" |
| incorrectSetupCodePayload: |
| type: char_string |
| defaultValue: "MT:-24J0AFN00I.0648G00" |
| PIXIT.CADMIN.CwDuration: |
| type: int16u |
| defaultValue: 180 |
| |
| tests: |
| - label: "Precondition: Reset Devices to factory defaults" |
| PICS: PICS_SDK_CI_ONLY |
| cluster: "SystemCommands" |
| command: "FactoryReset" |
| |
| - label: "Precondition: Reset Devices to factory defaults" |
| verification: | |
| Reset Devices to factory defaults |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_SKIP_SAMPLE_APP |
| arguments: |
| values: |
| - name: "message" |
| value: "Factory Reset the DUT and enter 'y' after success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Step 1: TH_CR1 starts a commissioning process with DUT_CE" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| - name: "payload" |
| value: correctPayload |
| |
| - label: "Step 1a: TH_CR1 commissioned with DUT_CE" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: |
| "Step 2: TH_CR1 opens a commissioning window on DUT_CE using a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| cluster: "Administrator Commissioning" |
| command: "OpenBasicCommissioningWindow" |
| PICS: CADMIN.S.C01.Rsp |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "CommissioningTimeout" |
| value: PIXIT.CADMIN.CwDuration |
| |
| - label: "Step 2a: Waiting after opening commissioning window" |
| PICS: CADMIN.S.C01.Rsp |
| cluster: "DelayCommands" |
| command: "WaitForMs" |
| arguments: |
| values: |
| - name: "ms" |
| value: waitAfterCommissioning |
| |
| - label: "Step 3: Verify that the DNS-SD advertisement shows CM=1" |
| PICS: CADMIN.S.C01.Rsp |
| cluster: "DiscoveryCommands" |
| command: "FindCommissionable" |
| response: |
| values: |
| - name: "commissioningMode" |
| value: 1 |
| |
| #As per issue https://github.com/CHIP-Specifications/chip-test-scripts/issues/495 adding --discover-once flag |
| - label: |
| "Step 4.1: Before the expiration of PIXIT.CADMIN.CwDuration set in |
| step 2, set up a TH_CR2 to start attempting to do PASE to DUT_CE and |
| failing 20 times. This can be done using a valid onboarding payload |
| with an incorrect setupcode" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.2: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.3: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.4: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.5: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.6: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.7: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.8: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.9: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.10: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.11: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.12: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.13: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.14: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.15: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.16: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.17: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.18: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.19: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| - label: |
| "Step 4.20: TH_CR2 starts a commissioning process with DUT_CE using |
| Invalid setup code" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: incorrectSetupCodePayload |
| - name: discoverOnce |
| value: true |
| response: |
| error: FAILURE |
| |
| # This step must match the verification step above where we checked `correctPayload` |
| - label: |
| "Step 5a: Before the expiration of PIXIT.CADMIN.CwDuration set in step |
| 2, TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding |
| payload" |
| identity: "beta" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId2 |
| - name: "payload" |
| value: correctPayload |
| response: |
| error: FAILURE |
| |
| - label: "Step 5b: TH_CR3 starts a commissioning process with DUT_CE" |
| identity: "gamma" |
| cluster: "CommissionerCommands" |
| command: "PairWithCode" |
| PICS: CADMIN.S |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId3 |
| - name: "payload" |
| value: correctPayload |
| response: |
| error: FAILURE |