| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 12.4.10. [TC-CNET-4.12] [Thread]Verification for ConnectNetwork Command |
| [DUT-Server] |
| |
| PICS: |
| - CNET.S.F01 |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Preconditions" |
| verification: | |
| 1. DUT supports CNET.S.F01(TH) |
| 2. DUT has a Network Commissioning cluster on endpoint PIXIT.CNET.ENDPOINT_THREAD with FeatureMap attribute of 2 |
| 3. TH has can communicate to two valid thread PANs: PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET and PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET |
| 4. TH can connect to two valid Wi-Fi access points: PIXIT.CNET.WIFI_1ST_ACCESSPOINT_SSID and PIXIT.CNET.WIFI_2ND_ACCESSPOINT_SSID |
| 5. XPANID of PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET is saved as th_xpan and the XPANID of PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET is saved as th_xpan1 |
| disabled: true |
| |
| - label: "Commission TH and DUT on Thread setup" |
| verification: | |
| |
| disabled: true |
| |
| - label: |
| "Step 1: TH sends ArmFailSafe command to the DUT with |
| ExpiryLengthSeconds set to 900" |
| verification: | |
| ./chip-tool generalcommissioning arm-fail-safe 900 1 22 0 |
| |
| Via the TH (chip-tool), Verify the DUT sends ArmFailSafe with timeout as 900 secs to the TH. |
| |
| [1657808518.577084][5979:5984] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0030 Command=0x0000_0001 |
| [1657808518.577181][5979:5984] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Command 0x0000_0001 |
| [1657808518.577311][5979:5984] CHIP:TOO: ArmFailSafeResponse: { |
| [1657808518.577409][5979:5984] CHIP:TOO: errorCode: 0 |
| [1657808518.577466][5979:5984] CHIP:TOO: debugText: |
| [1657808518.577518][5979:5984] CHIP:TOO: } |
| [1657808518.577604][5979:5984] CHIP:DMG: ICR moving to [AwaitingDe] |
| [1657808518.577705][5979:5984] CHIP:EM: Sending Standalone Ack for MessageCounter:240383707 on exchange 56756i |
| disabled: true |
| |
| - label: |
| "Step 2: TH reads Networks attribute from the DUT and saves the number |
| of entries as 'NumNetworks'" |
| PICS: CNET.S.A0001 |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(first network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623217.387917][9816:9821] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 4196844346 |
| [1659623217.388007][9816:9821] CHIP:TOO: Networks: 1 entries |
| [1659623217.388058][9816:9821] CHIP:TOO: [1]: { |
| [1659623217.388089][9816:9821] CHIP:TOO: NetworkID: 1111111122222221 |
| [1659623217.388110][9816:9821] CHIP:TOO: Connected: TRUE |
| [1659623217.388129][9816:9821] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 3: TH saves the index of the Networks list entry from step 2 as |
| Userth_netidx" |
| verification: | |
| |
| disabled: true |
| |
| - label: |
| "Step 4: TH sends RemoveNetwork Command to the DUT with NetworkID |
| field set to th_xpan and Breadcrumb field set to 1" |
| PICS: CNET.S.C04.Rsp && CNET.S.C05.Tx |
| verification: | |
| ./chip-tool networkcommissioning remove-network hex:<your network id in hex> 1 0 --Breadcrumb 1 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning remove-network hex:1111111122222221 22 0 --Breadcrumb 1 |
| |
| Via the TH (chip-tool), Verify the NetworkConfigResponse that contains Networking Status value as 0 (success). |
| |
| [1659623277.664477][9824:9831] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0005 |
| [1659623277.664556][9824:9831] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0005 |
| [1659623277.664667][9824:9831] CHIP:TOO: NetworkConfigResponse: { |
| [1659623277.664758][9824:9831] CHIP:TOO: networkingStatus: 0 |
| [1659623277.664810][9824:9831] CHIP:TOO: networkIndex: 0 |
| [1659623277.664843][9824:9831] CHIP:TOO: } |
| [1659623277.664907][9824:9831] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 5: TH sends AddOrUpdateThreadNetwork command to the DUT with |
| operational dataset field set to |
| PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET and Breadcrumb field set to 1" |
| PICS: CNET.S.C03.Rsp && CNET.S.C05.Tx |
| verification: | |
| ./chip-tool networkcommissioning add-or-update-thread-network-network hex:<your network id in hex> 1 0 --Breadcrumb 1 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning add-or-update-thread-network hex:0e08000000000001000035060004001fffe00708fdd235604ef7ccb50c0402a0f7f8051000112233445566778899aabbccddeeff030f4f70656e54687265616444656d6f3104101dfb97da1e39dc596e886f52cb870a84000300000f0208111111112222222201021234 22 0 --Breadcrumb 1(second network dataset value) |
| |
| Via the TH (chip-tool), Verify the NetworkConfigResponse that contains Networking Status value as 0 (success). |
| |
| [1659623353.963125][9870:9875] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0005 |
| [1659623353.963312][9870:9875] CHIP:TOO: NetworkConfigResponse: { |
| [1659623353.963406][9870:9875] CHIP:TOO: networkingStatus: 0 |
| [1659623353.963473][9870:9875] CHIP:TOO: networkIndex: 0 |
| [1659623353.963530][9870:9875] CHIP:TOO: } |
| [1659623353.963623][9870:9875] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: "Step 6: TH reads Networks attribute from the DUT" |
| PICS: CNET.S.A0001 |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(second network id). |
| -that the connected status should be the type of bool value as FALSE. |
| |
| [1659623451.276073][9891:9896] CHIP:TOO: Networks: 1 entries |
| [1659623451.276194][9891:9896] CHIP:TOO: [1]: { |
| [1659623451.276268][9891:9896] CHIP:TOO: NetworkID: 1111111122222222 |
| [1659623451.276326][9891:9896] CHIP:TOO: Connected: FALSE |
| [1659623451.276381][9891:9896] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 7: TH sends ConnectNetwork command to the DUT with NetworkID |
| field set to PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET and Breadcrumb |
| field set to 2" |
| PICS: CNET.S.C06.Rsp |
| verification: | |
| ./chip-tool networkcommissioning connect-network hex:<your network id in hex> 1 0 --Breadcrumb 2 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning connect-network hex:1111111122222222 22 0 --Breadcrumb 2 |
| |
| Via the TH (chip-tool), Verify the ConnectNetworkResponse that contains Networking Status value as 0 (success). |
| |
| 1 Command=0x0000_0007 |
| [1659623520.296630][9903:9908] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0007 |
| [1659623520.296853][9903:9908] CHIP:TOO: ConnectNetworkResponse: { |
| [1659623520.296935][9903:9908] CHIP:TOO: networkingStatus: 0 |
| [1659623520.296987][9903:9908] CHIP:TOO: errorValue: null |
| [1659623520.297037][9903:9908] CHIP:TOO: } |
| [1659623520.297124][9903:9908] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 8: TH discovers and connects to DUT on the |
| PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET operational network" |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(second network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623451.276073][9891:9896] CHIP:TOO: Networks: 1 entries |
| [1659623451.276194][9891:9896] CHIP:TOO: [1]: { |
| [1659623451.276268][9891:9896] CHIP:TOO: NetworkID: 1111111122222222 |
| [1659623451.276326][9891:9896] CHIP:TOO: Connected: TRUE |
| [1659623451.276381][9891:9896] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 9: TH reads Breadcrumb attribute from the General Commissioning |
| cluster of the DUT" |
| PICS: CNET.S.C06.Rsp |
| verification: | |
| ./chip-tool generalcommissioning read breadcrumb 22 0 |
| |
| Verify "breadcrumb value is set to 2" on the TH(Chip-tool) Log: |
| |
| [1659623558.934419][9911:9917] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Attribute 0x0000_0000 DataVersion: 808037534 |
| [1659623558.934529][9911:9917] CHIP:TOO: Breadcrumb: 2 |
| [1659623558.934681][9911:9917] CHIP:EM: Sending Standalone Ack for MessageCounter:244248455 on exchange 8477i |
| disabled: true |
| |
| - label: |
| "Step 10: TH sends ArmFailSafe command to the DUT with |
| ExpiryLengthSeconds set to 0" |
| verification: | |
| ./chip-tool generalcommissioning arm-fail-safe 0 1 22 0 |
| |
| Verify "ArmFailSafeResponse" on the TH(Chip-tool) Log: |
| |
| [1659623653.222898][9932:9937] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0030 Command=0x0000_0001 |
| [1659623653.223029][9932:9937] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Command 0x0000_0001 |
| [1659623653.223198][9932:9937] CHIP:TOO: ArmFailSafeResponse: { |
| [1659623653.223283][9932:9937] CHIP:TOO: errorCode: 0 |
| [1659623653.223347][9932:9937] CHIP:TOO: debugText: |
| [1659623653.223403][9932:9937] CHIP:TOO: } |
| [1659623653.223492][9932:9937] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 11: TH ensures it can communicate on |
| PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET" |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(first network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623217.387917][9816:9821] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 4196844346 |
| [1659623217.388007][9816:9821] CHIP:TOO: Networks: 1 entries |
| [1659623217.388058][9816:9821] CHIP:TOO: [1]: { |
| [1659623217.388089][9816:9821] CHIP:TOO: NetworkID: 1111111122222221 |
| [1659623217.388110][9816:9821] CHIP:TOO: Connected: TRUE |
| [1659623217.388129][9816:9821] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 12: TH discovers and connects to DUT on the |
| PIXIT.CNET.THREAD_1ST_OPERATIONALDATASET operational network" |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(first network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623217.387917][9816:9821] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 4196844346 |
| [1659623217.388007][9816:9821] CHIP:TOO: Networks: 1 entries |
| [1659623217.388058][9816:9821] CHIP:TOO: [1]: { |
| [1659623217.388089][9816:9821] CHIP:TOO: NetworkID: 1111111122222221 |
| [1659623217.388110][9816:9821] CHIP:TOO: Connected: TRUE |
| [1659623217.388129][9816:9821] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 13: TH sends ArmFailSafe command to the DUT with |
| ExpiryLengthSeconds set to 900" |
| verification: | |
| ./chip-tool generalcommissioning arm-fail-safe 900 1 22 0 |
| |
| Via the TH (chip-tool), Verify the DUT sends ArmFailSafe with timeout as 900 secs to the TH. |
| |
| [1657808518.577084][5979:5984] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0030 Command=0x0000_0001 |
| [1657808518.577181][5979:5984] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Command 0x0000_0001 |
| [1657808518.577311][5979:5984] CHIP:TOO: ArmFailSafeResponse: { |
| [1657808518.577409][5979:5984] CHIP:TOO: errorCode: 0 |
| [1657808518.577466][5979:5984] CHIP:TOO: debugText: |
| [1657808518.577518][5979:5984] CHIP:TOO: } |
| [1657808518.577604][5979:5984] CHIP:DMG: ICR moving to [AwaitingDe] |
| [1657808518.577705][5979:5984] CHIP:EM: Sending Standalone Ack for MessageCounter:240383707 on exchange 56756i |
| disabled: true |
| |
| - label: |
| "Step 14: TH sends RemoveNetwork Command to the DUT with NetworkID |
| field set to th_xpan and Breadcrumb field set to 1" |
| PICS: CNET.S.C04.Rsp && CNET.S.C05.Tx |
| verification: | |
| ./chip-tool networkcommissioning remove-network hex:<your network id in hex> 1 0 --Breadcrumb 1 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning remove-network hex:1111111122222221 22 0 --Breadcrumb 1 |
| |
| Via the TH (chip-tool), Verify the NetworkConfigResponse that contains Networking Status value as 0 (success). |
| |
| [1659623277.664477][9824:9831] CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_0031 Command=0x0000_0005 |
| [1659623277.664556][9824:9831] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0005 |
| [1659623277.664667][9824:9831] CHIP:TOO: NetworkConfigResponse: { |
| [1659623277.664758][9824:9831] CHIP:TOO: networkingStatus: 0 |
| [1659623277.664810][9824:9831] CHIP:TOO: networkIndex: 0 |
| [1659623277.664843][9824:9831] CHIP:TOO: } |
| [1659623277.664907][9824:9831] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 15: TH sends AddOrUpdateThreadNetwork command to the DUT with |
| the OperationalDataset field set to |
| PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET and Breadcrumb field set to 1" |
| PICS: CNET.S.C03.Rsp && CNET.S.C05.Tx |
| verification: | |
| ./chip-tool networkcommissioning add-or-update-thread-network-network hex:<your network id in hex> 1 0 --Breadcrumb 1 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning add-or-update-thread-network hex:0e08000000000001000035060004001fffe00708fdd235604ef7ccb50c0402a0f7f8051000112233445566778899aabbccddeeff030f4f70656e54687265616444656d6f3104101dfb97da1e39dc596e886f52cb870a84000300000f0208111111112222222201021234 22 0 --Breadcrumb 1(second network dataset value) |
| |
| Via the TH (chip-tool), Verify the NetworkConfigResponse that contains Networking Status value as 0 (success). |
| |
| [1659623353.963125][9870:9875] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0005 |
| [1659623353.963312][9870:9875] CHIP:TOO: NetworkConfigResponse: { |
| [1659623353.963406][9870:9875] CHIP:TOO: networkingStatus: 0 |
| [1659623353.963473][9870:9875] CHIP:TOO: networkIndex: 0 |
| [1659623353.963530][9870:9875] CHIP:TOO: } |
| [1659623353.963623][9870:9875] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 16: TH sends ConnectNetwork command to the DUT with NetworkID |
| field set to the extended PAN ID of |
| PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET and Breadcrumb field set to 3" |
| PICS: CNET.S.C06.Rsp && CNET.S.C07.Tx |
| verification: | |
| ./chip-tool networkcommissioning connect-network hex:<your network id in hex> 1 0 --Breadcrumb 3 |
| |
| Below is an example: |
| |
| ./chip-tool networkcommissioning connect-network hex:1111111122222222 22 0 --Breadcrumb 3 |
| |
| Via the TH (chip-tool), Verify the ConnectNetworkResponse that contains Networking Status value as 0 (success). |
| |
| 1 Command=0x0000_0007 |
| [1659623520.296630][9903:9908] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Command 0x0000_0007 |
| [1659623520.296853][9903:9908] CHIP:TOO: ConnectNetworkResponse: { |
| [1659623520.296935][9903:9908] CHIP:TOO: networkingStatus: 0 |
| [1659623520.296987][9903:9908] CHIP:TOO: errorValue: null |
| [1659623520.297037][9903:9908] CHIP:TOO: } |
| [1659623520.297124][9903:9908] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Step 17: TH discovers and connects to DUT on the |
| PIXIT.CNET.THREAD_2ND_OPERATIONALDATASET operational network" |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(Second network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623217.387917][9816:9821] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 4196844346 |
| [1659623217.388007][9816:9821] CHIP:TOO: Networks: 1 entries |
| [1659623217.388058][9816:9821] CHIP:TOO: [1]: { |
| [1659623217.388089][9816:9821] CHIP:TOO: NetworkID: 1111111122222222 |
| [1659623217.388110][9816:9821] CHIP:TOO: Connected: TRUE |
| [1659623217.388129][9816:9821] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 18: TH reads Breadcrumb attribute from the General Commissioning |
| cluster of the DUT" |
| PICS: CNET.S.C06.Rsp |
| verification: | |
| ./chip-tool generalcommissioning read breadcrumb 22 0 |
| |
| Verify "breadcrumb value is set to 3" on the TH(Chip-tool) Log: |
| |
| [1659623558.934419][9911:9917] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Attribute 0x0000_0000 DataVersion: 808037534 |
| [1659623558.934529][9911:9917] CHIP:TOO: Breadcrumb: 3 |
| [1659623558.934681][9911:9917] CHIP:EM: Sending Standalone Ack for MessageCounter:244248455 on exchange 8477i |
| disabled: true |
| |
| - label: "Step 19: TH sends the CommissioningComplete command to the DUT" |
| verification: | |
| ./chip-tool generalcommissioning commissioning-complete 22 0 |
| |
| Via the TH (chip-tool), Verify the DUT sends CommissioningComplete command and the errorCode field is 0(OK). |
| |
| [1657734803.411199][7802:7808] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0030 Command 0x0000_0005 |
| [1657734803.411256][7802:7808] CHIP:TOO: CommissioningCompleteResponse: { |
| [1657734803.411306][7802:7808] CHIP:TOO: errorCode: 0 |
| [1657734803.411333][7802:7808] CHIP:TOO: debugText: |
| [1657734803.411356][7802:7808] CHIP:TOO: } |
| disabled: true |
| |
| - label: "Step 20: TH reads Networks attribute from the DUT" |
| PICS: CNET.S.A0001 |
| verification: | |
| ./chip-tool networkcommissioning read networks 22 0 |
| |
| Via the TH (chip-tool), Verify: |
| -the Networks attribute has NetworkID that should be as th_xpan(Second network id). |
| -that the connected status should be the type of bool value as TRUE. |
| |
| [1659623217.387917][9816:9821] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0031 Attribute 0x0000_0001 DataVersion: 4196844346 |
| [1659623217.388007][9816:9821] CHIP:TOO: Networks: 1 entries |
| [1659623217.388058][9816:9821] CHIP:TOO: [1]: { |
| [1659623217.388089][9816:9821] CHIP:TOO: NetworkID: 1111111122222222 |
| [1659623217.388110][9816:9821] CHIP:TOO: Connected: TRUE |
| [1659623217.388129][9816:9821] CHIP:TOO: } |
| disabled: true |