| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: Door Lock Cluster Users and Credentials tests |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Door Lock" |
| endpoint: 1 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Read available user slot and verify response fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Get number of supported users and verify default value" |
| command: "readAttribute" |
| attribute: "NumberOfTotalUsersSupported" |
| response: |
| saveAs: NumberOfTotalUsersSupported |
| value: 10 |
| |
| - label: "Read fails for user with index 0" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 0 |
| response: |
| error: INVALID_COMMAND |
| |
| - label: |
| "Read fails for user with index greater than Number Of Users Supported" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported + 1 |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Create new user with default parameters" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Set user at the occupied index fails with appropriate response" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| response: |
| error: FAILURE |
| |
| - label: "Modify userName for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Modify userUniqueId for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: 0x1234ABCD |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: 0x1234ABCD |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Modify userStatus for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 0x03 # Occupied, Disabled |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: 0x1234ABCD |
| - name: "userStatus" |
| value: 3 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Modify userType for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: 0x06 # Disposable user |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: 0x1234ABCD |
| - name: "userStatus" |
| value: 3 |
| - name: "userType" |
| value: 6 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Modify credentialRule for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: 2 |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "new_user" |
| - name: "userUniqueId" |
| value: 0x1234ABCD |
| - name: "userStatus" |
| value: 3 |
| - name: "userType" |
| value: 6 |
| - name: "credentialRule" |
| value: 2 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Modify all fields for existing user" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "test_user" |
| - name: "userUniqueId" |
| value: 0x1BCDA0A0 |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 1 |
| |
| - label: "Read the modified user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "test_user" |
| - name: "userUniqueId" |
| value: 0x1BCDA0A0 |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 1 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Add another user with non-default fields" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: "test_user2" |
| - name: "userUniqueId" |
| value: 0xC0FFEE |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 1 |
| - name: "credentialRule" |
| value: 2 |
| |
| - label: "Read the new user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 2 |
| response: |
| values: |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: "test_user2" |
| - name: "userUniqueId" |
| value: 0xC0FFEE |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 1 |
| - name: "credentialRule" |
| value: 2 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Try to add a user with userStatus 0" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: "test_user3" |
| - name: "userUniqueId" |
| value: 0xBABA |
| - name: "userStatus" |
| value: 0 |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Make sure the user did not get created" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 3 |
| response: |
| values: |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Try to add a user with userStatus 2" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: "test_user3" |
| - name: "userUniqueId" |
| value: 0xBABA |
| - name: "userStatus" |
| value: 2 |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Make sure the user did not get created" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 3 |
| response: |
| values: |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Try to add a user with userStatus 3" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: "test_user3" |
| - name: "userUniqueId" |
| value: 0xBABA |
| - name: "userStatus" |
| value: 3 |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the new third user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 3 |
| response: |
| values: |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: "test_user3" |
| - name: "userUniqueId" |
| value: 0xBABA |
| - name: "userStatus" |
| value: 3 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Create user in the last slot" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported |
| - name: "userName" |
| value: "last_user" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: "Read the last user back and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported |
| response: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported |
| - name: "userName" |
| value: "last_user" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "User creation in the 0 slot fails" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 0 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "User creation in the out-of-bounds slot fails" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported + 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clear first user" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| |
| - label: "Read cleared user and verify it is available" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: 2 # Slot 2 is still occupied |
| |
| - label: "Create new user in the cleared slot" |
| command: "SetUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| |
| - label: |
| "Read the user in the previously cleared slot and verify its fields" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: 2 # Slot 2 is still occupied |
| |
| - label: "Clear user with index 0 fails" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 0 |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clear user with out-of-bounds index fails" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported + 1 |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clear all users" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 0xFFFE |
| |
| - label: "Read first cleared user and verify it is available" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 2 |
| response: |
| values: |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Read last cleared user and verify it is available" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported |
| response: |
| values: |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| # |
| # Credentials tests |
| # |
| |
| - label: "Get number of supported PIN credentials and verify default value" |
| command: "readAttribute" |
| attribute: "NumberOfPINUsersSupported" |
| response: |
| saveAs: NumberOfPINUsersSupported |
| value: 10 |
| |
| - label: "Check that PIN credential does not exist" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Reading PIN credential with index 0 returns no credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 0 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: |
| "Reading PIN credential with out-of-bounds index returns no credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: |
| { |
| CredentialType: 1, |
| CredentialIndex: NumberOfPINUsersSupported + 1, |
| } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: |
| "Verify that a user with UserStatus = 0 cannot be added via |
| SetCredential" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: 0 |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 # INVALID_COMMAND |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: |
| "Verify that a user with UserStatus = 2 cannot be added via |
| SetCredential" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: 2 |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 # INVALID_COMMAND |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Create new PIN credential and user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Verify created user" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: [{ CredentialType: 1, CredentialIndex: 1 }] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Verify created PIN credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: true |
| - name: "userIndex" |
| value: 1 |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Create new PIN credential and user with index 0 fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 0 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Create new PIN credential and user with out-of-bounds index fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: |
| { |
| CredentialType: 1, |
| CredentialIndex: NumberOfPINUsersSupported + 1, |
| } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Get number of supported RFID credentials and verify default value" |
| command: "readAttribute" |
| attribute: "NumberOfRFIDUsersSupported" |
| response: |
| saveAs: NumberOfRFIDUsersSupported |
| value: 10 |
| |
| # Disabled because due to https://github.com/project-chip/connectedhomeip/issues/21656: that causes the nextCredentialIndex |
| # here to have the wrong value. |
| - label: "Reading RFID credential with index 0 returns no credential" |
| disabled: true |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 0 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| # Duplicate of the previous test that does not check the value of nextCredentialIndex |
| - label: |
| "Reading RFID credential with index 0 returns no credential duplicate |
| with bug workaround" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 0 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| |
| - label: |
| "Reading RFID credential with out-of-bounds index returns no |
| credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: |
| { |
| CredentialType: 2, |
| CredentialIndex: NumberOfRFIDUsersSupported + 1, |
| } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Check that RFID credential does not exist" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Create new RFID credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| - name: "credentialData" |
| value: "rfid_data_123456" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: "Verify modified user" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: |
| [ |
| { CredentialType: 1, CredentialIndex: 1 }, |
| { CredentialType: 2, CredentialIndex: 2 }, |
| ] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Verify created credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: true |
| - name: "userIndex" |
| value: 1 |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Create new RFID credential and user with index 0 fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 0 } |
| - name: "credentialData" |
| value: "new_rfid_data_field" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: |
| "Create new RFID credential and user with out-of-bounds index fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: |
| { |
| CredentialType: 2, |
| CredentialIndex: NumberOfRFIDUsersSupported + 1, |
| } |
| - name: "credentialData" |
| value: "new_rfid_data_field" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Create new credential and try to add it to 0 user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "123465" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new credential and try to add it to out-of-bounds user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "123465" |
| - name: "userIndex" |
| value: NumberOfTotalUsersSupported + 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new PIN with too short data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "12345" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new PIN with too long data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "123456789" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new RFID with too short data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "rfid_data" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new PIN with Programming user type fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: 3 |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new RFID with too short data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "very_long_rfid_data_to_test_boundaries" |
| - name: "userIndex" |
| value: 0 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create new PIN credential with data the would cause duplicate" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 4 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x02 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Create new RFID credential with data the would cause duplicate" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 4 } |
| - name: "credentialData" |
| value: "rfid_data_123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x02 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Modify credentialData of existing PIN credential" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: |
| "Verify that credential was changed by creating new credential with |
| old data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 2 |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: |
| "Verify that credential was changed by creating new credential with |
| new data" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 4 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x02 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| # At that state we have the following users: |
| # Index = 1, Credentials = {(1, PIN), (2, RFID)} |
| # Index = 2, Credentials = {(3, PIN)} |
| |
| # Add additional RFID and PIN credentials to the user to make sure that we can have distinct credentials |
| # of the same type |
| |
| - label: "Create new RFID credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 4 } |
| - name: "credentialData" |
| value: "rfid_data_7890" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Verify modified user" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: |
| [ |
| { CredentialType: 1, CredentialIndex: 1 }, |
| { CredentialType: 2, CredentialIndex: 2 }, |
| { CredentialType: 2, CredentialIndex: 4 }, |
| ] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: 2 |
| |
| - label: "Create new RFID credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 5 } |
| - name: "credentialData" |
| value: "789012" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 6 |
| |
| - label: "Verify modified user" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: |
| [ |
| { CredentialType: 1, CredentialIndex: 1 }, |
| { CredentialType: 2, CredentialIndex: 2 }, |
| { CredentialType: 2, CredentialIndex: 4 }, |
| { CredentialType: 1, CredentialIndex: 5 }, |
| ] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: 2 |
| |
| - label: "Clear first PIN credential" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| |
| - label: "Read back the credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Read the user back and make sure PIN credential is deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: |
| [ |
| { CredentialType: 2, CredentialIndex: 2 }, |
| { CredentialType: 2, CredentialIndex: 4 }, |
| { CredentialType: 1, CredentialIndex: 5 }, |
| ] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: 2 |
| |
| - label: "Clear the second PIN credential" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| |
| - label: "Read back the credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Read the user back and make sure related user is deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 2 |
| response: |
| values: |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Create new RFID credential with user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "rfid_data_12345" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 2 |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: "Clear all the RFID credentials" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 0xFFFE } |
| |
| - label: "Read back the fist RFID credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Read back the second RFID credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Read back the third RFID credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 4 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: |
| "Read the user related with first RFID back and make sure it has only |
| PIN credential" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: [{ CredentialType: 1, CredentialIndex: 5 }] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: |
| "Read the user related with second RFID back and make sure it is |
| deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 2 |
| response: |
| values: |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Create new PIN credential with user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 2 |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Create new RFID credential with user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| - name: "credentialData" |
| value: "rfid_data_1234" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 3 |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: "Create another RFID credential with user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 6 } |
| - name: "credentialData" |
| value: "rfid_data_9876" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 4 |
| - name: "nextCredentialIndex" |
| value: 7 |
| |
| # This test is disabled for now because ZAP generators are not generating working code when |
| # command has nullable as a parameter. |
| - label: "Clear all the credentials" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: null |
| |
| - label: "Read back the first PIN credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Read back the first RFID credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 2 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Read back the second PIN credential and make sure it is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 6 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: |
| "Read the user related with first PIN back and make sure it is deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: |
| "Read the user related with first RFID back and make sure it is |
| deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 2 |
| response: |
| values: |
| - name: "userIndex" |
| value: 2 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: |
| "Read the user related with second PIN back and make sure it is |
| deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 3 |
| response: |
| values: |
| - name: "userIndex" |
| value: 3 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: |
| "Read the user related with last RFID back and make sure it is deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 4 |
| response: |
| values: |
| - name: "userIndex" |
| value: 4 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Create new Programming PIN credential with invalid index" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x85 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Create new Programming PIN credential with valid index" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 0 } |
| - name: "credentialData" |
| value: "123456" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Verify created user" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: "" |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: 1 |
| - name: "userType" |
| value: 0 |
| - name: "credentialRule" |
| value: 0 |
| - name: "credentials" |
| value: [{ CredentialType: 0, CredentialIndex: 0 }] |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Verify created programming PIN credential" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 0 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: true |
| - name: "userIndex" |
| value: 1 |
| - name: "creatorFabricIndex" |
| value: 1 |
| - name: "lastModifiedFabricIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Modify the Programming PIN credential" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 2 |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 0 } |
| - name: "credentialData" |
| value: "654321" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| - label: "Clearing Programming PIN fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 0 } |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clearing Programming PIN with invalid index fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 1 } |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clearing PIN credential with zero index fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 0 } |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clearing PIN credential with out-of-bound index fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: |
| { |
| CredentialType: 1, |
| CredentialIndex: NumberOfPINUsersSupported + 1, |
| } |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clearing RFID credential with zero index fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 2, CredentialIndex: 0 } |
| response: |
| error: INVALID_COMMAND |
| |
| - label: "Clearing RFID credential with out-of-bound index fails" |
| command: "ClearCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "credential" |
| value: |
| { |
| CredentialType: 2, |
| CredentialIndex: NumberOfRFIDUsersSupported + 1, |
| } |
| response: |
| error: INVALID_COMMAND |
| |
| # Cleanup so the test could be run again. Also checks that clearUser removes associated credentials |
| - label: "Clear the Programming PIN user" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| |
| - label: "Make sure Programming PIN user is deleted" |
| command: "GetUser" |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
| response: |
| values: |
| - name: "userIndex" |
| value: 1 |
| - name: "userName" |
| value: null |
| - name: "userUniqueId" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| - name: "credentialRule" |
| value: null |
| - name: "credentials" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextUserIndex" |
| value: null |
| |
| - label: "Make sure programming PIN credential is deleted" |
| command: "GetCredentialStatus" |
| arguments: |
| values: |
| - name: "credential" |
| value: { CredentialType: 0, CredentialIndex: 0 } |
| response: |
| values: |
| - name: "credentialExists" |
| value: false |
| - name: "userIndex" |
| value: null |
| - name: "creatorFabricIndex" |
| value: null |
| - name: "lastModifiedFabricIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: null |
| |
| # Test to make sure it's impossible to add more than NumberOfCredentialsSupportedPerUser credentials to a single user |
| - label: "Create new PIN credential and user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 1 } |
| - name: "credentialData" |
| value: "000000" |
| - name: "userIndex" |
| value: null |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: 1 |
| - name: "nextCredentialIndex" |
| value: 2 |
| |
| - label: "Create second PIN credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 2 } |
| - name: "credentialData" |
| value: "000001" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 3 |
| |
| - label: "Create third PIN credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 3 } |
| - name: "credentialData" |
| value: "000002" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 4 |
| |
| - label: "Create fourth PIN credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 4 } |
| - name: "credentialData" |
| value: "000003" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 5 |
| |
| - label: "Create fifth PIN credential and add it to existing user" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 5 } |
| - name: "credentialData" |
| value: "000004" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x00 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 6 |
| |
| - label: "Try to create sixth PIN credential and make sure it fails" |
| command: "SetCredential" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "operationType" |
| value: 0 |
| - name: "credential" |
| value: { CredentialType: 1, CredentialIndex: 6 } |
| - name: "credentialData" |
| value: "000005" |
| - name: "userIndex" |
| value: 1 |
| - name: "userStatus" |
| value: null |
| - name: "userType" |
| value: null |
| response: |
| values: |
| - name: "status" |
| value: 0x89 |
| - name: "userIndex" |
| value: null |
| - name: "nextCredentialIndex" |
| value: 7 |
| |
| - label: "Final clean-up" |
| command: "ClearUser" |
| timedInteractionTimeoutMs: 10000 |
| arguments: |
| values: |
| - name: "userIndex" |
| value: 1 |
