src/platform/silabs/rs911x/rsi_ble_config.h - third_party/github/project-chip/connectedhomeip - Git at Google

 /*******************************************************************************
  * @file  rsi_ble_config.h
  * @brief
  *******************************************************************************
  * # License
  * <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
  *******************************************************************************
  *
  * The licensor of this software is Silicon Laboratories Inc. Your use of this
  * software is governed by the terms of Silicon Labs Master Software License
  * Agreement (MSLA) available at
  * www.silabs.com/about-us/legal/master-software-license-agreement. This
  * software is distributed to you in Source Code format and is governed by the
  * sections of the MSLA applicable to Source Code.
  *
  ******************************************************************************/

 #ifndef RSI_BLE_CONFIG_H
 #define RSI_BLE_CONFIG_H

 #include "rsi_ble_apis.h"
 #include <rsi_data_types.h>
 /******************************************************
  * *                      Macros
  * ******************************************************/
 //! application event list
 #define RSI_BLE_CONN_EVENT (0x01)
 #define RSI_BLE_DISCONN_EVENT (0x02)
 #define RSI_BLE_GATT_WRITE_EVENT (0x03)
 #define RSI_BLE_MTU_EVENT (0x04)
 #define RSI_BLE_GATT_INDICATION_CONFIRMATION (0x05)
 #define RSI_BLE_RESP_ATT_VALUE (0x06)
 #define RSI_SSID (0x0D)
 #define RSI_SECTYPE (0x0E)
 #define RSI_BLE_WLAN_DISCONN_NOTIFY (0x0F)
 #define RSI_WLAN_ALREADY (0x10)
 #define RSI_WLAN_NOT_ALREADY (0x11)
 #define RSI_BLE_WLAN_TIMEOUT_NOTIFY (0x12)
 #define RSI_BLE_WLAN_JOIN_STATUS (0x15)
 #define RSI_APP_FW_VERSION (0x13)
 #define RSI_BLE_WLAN_DISCONNECT_STATUS (0x14)

 #define RSI_REM_DEV_ADDR_LEN (18)
 #define RSI_REM_DEV_NAME_LEN (31)

 #define RSI_BLE_DEV_NAME "CCP_DEVICE"
 #define RSI_BLE_SET_RAND_ADDR "00:23:A7:12:34:56"

 #define CLEAR_WHITELIST (0x00)
 #define ADD_DEVICE_TO_WHITELIST (0x01)
 #define DELETE_DEVICE_FROM_WHITELIST (0x02)

 #define ALL_PHYS (0x00)

 #define RSI_BLE_DEV_ADDR_RESOLUTION_ENABLE (0)

 #define RSI_OPERMODE_WLAN_BLE (13)

 /***********************************************************************************************************************************************/
 //! Characteristic Presenatation Format Fields
 /***********************************************************************************************************************************************/
 #define RSI_BLE_UINT8_FORMAT (0x04)
 #define RSI_BLE_EXPONENT (0x00)
 #define RSI_BLE_PERCENTAGE_UNITS_UUID (0x27AD)
 #define RSI_BLE_NAME_SPACE (0x01)
 #define RSI_BLE_DESCRIPTION (0x010B)

 //! BLE characteristic custom service uuid
 #define RSI_BLE_CUSTOM_SERVICE_UUID (0xFFF6)
 #define RSI_BLE_CUSTOM_LEVEL_UUID (0x1FF1)

 #ifdef RSI_M4_INTERFACE
 #define RSI_BLE_MAX_NBR_ATT_REC (20)
 #define RSI_BLE_MAX_NBR_SLAVES (1)
 #define RSI_BLE_NUM_CONN_EVENTS (2)
 #else
 #define RSI_BLE_MAX_NBR_ATT_REC (80)
 #define RSI_BLE_MAX_NBR_SLAVES (3)
 #define RSI_BLE_NUM_CONN_EVENTS (20)
 #endif

 #define RSI_BLE_MAX_NBR_ATT_SERV (10)

 #define RSI_BLE_MAX_NBR_MASTERS (1)
 #define RSI_BLE_GATT_ASYNC_ENABLE (1)
 #define RSI_BLE_GATT_INIT (0)

 #define RSI_BLE_START_SCAN (0x01)
 #define RSI_BLE_STOP_SCAN (0x00)

 #define RSI_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
 #define RSI_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL
 /* Number of BLE GATT RECORD SIZE IN (n*16 BYTES), eg:(0x40*16)=1024 bytes */
 #define RSI_BLE_NUM_REC_BYTES (0x40)

 #define RSI_BLE_INDICATE_CONFIRMATION_FROM_HOST (0)

 /*=======================================================================*/
 //! Advertising command parameters
 /*=======================================================================*/

 #define RSI_BLE_ADV_TYPE UNDIR_CONN
 #define RSI_BLE_ADV_FILTER_TYPE ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY
 #define RSI_BLE_ADV_DIR_ADDR_TYPE LE_PUBLIC_ADDRESS
 #define RSI_BLE_ADV_DIR_ADDR "00:15:83:6A:64:17"

 //! Reduced the BLE adv interval time to match with EFR BLE
 #define RSI_BLE_ADV_INT_MIN (0x20)
 #define RSI_BLE_ADV_INT_MAX (0x20)

 #define RSI_BLE_ADV_CHANNEL_MAP (0x07)

 //! Advertise status
 //!  Start the advertising process
 #define RSI_BLE_START_ADV (0x01)
 //! Stop the advertising process
 #define RSI_BLE_STOP_ADV (0x00)

 //! BLE Tx Power Index On Air
 #define RSI_BLE_PWR_INX (30)

 //! BLE Active H/w Pwr Features
 #define BLE_DISABLE_DUTY_CYCLING (0)
 #define BLE_DUTY_CYCLING (1)
 #define BLR_DUTY_CYCLING (2)
 #define BLE_4X_PWR_SAVE_MODE (4)
 #define RSI_BLE_PWR_SAVE_OPTIONS BLE_DISABLE_DUTY_CYCLING

 //! Advertise types

 /* Advertising will be visible(discoverable) to all the devices.
  * Scanning/Connection is also accepted from all devices
  * */
 #define UNDIR_CONN (0x80)

 /* Advertising will be visible(discoverable) to the particular device
  * mentioned in RSI_BLE_ADV_DIR_ADDR only.
  * Scanning and Connection will be accepted from that device only.
  * */
 #define DIR_CONN (0x81)

 /* Advertising will be visible(discoverable) to all the devices.
  * Scanning will be accepted from all the devices.
  * Connection will be not be accepted from any device.
  * */
 #define UNDIR_SCAN (0x82)

 /* Advertising will be visible(discoverable) to all the devices.
  * Scanning and Connection will not be accepted from any device
  * */
 #define UNDIR_NON_CONN (0x83)

 /* Advertising will be visible(discoverable) to the particular device
  * mentioned in RSI_BLE_ADV_DIR_ADDR only.
  * Scanning and Connection will be accepted from that device only.
  * */
 #define DIR_CONN_LOW_DUTY_CYCLE (0x84)

 //! Advertising flags
 #define LE_LIMITED_DISCOVERABLE (0x01)
 #define LE_GENERAL_DISCOVERABLE (0x02)
 #define LE_BR_EDR_NOT_SUPPORTED (0x04)

 //! Advertise filters
 #define ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY (0x00)
 #define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_ANY (0x01)
 #define ALLOW_SCAN_REQ_ANY_CONN_REQ_WHITE_LIST (0x02)
 #define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_WHITE_LIST (0x03)

 //! Address types
 #define LE_PUBLIC_ADDRESS (0x00)
 #define LE_RANDOM_ADDRESS (0x01)
 #define LE_RESOLVABLE_PUBLIC_ADDRESS (0x02)
 #define LE_RESOLVABLE_RANDOM_ADDRESS (0x03)

 /*=======================================================================*/

 /*=======================================================================*/
 //! Connection parameters
 /*=======================================================================*/
 #define LE_SCAN_INTERVAL (0x0100)
 #define LE_SCAN_WINDOW (0x0050)

 #define CONNECTION_INTERVAL_MIN (0x00A0)
 #define CONNECTION_INTERVAL_MAX (0x00A0)

 #define CONNECTION_LATENCY (0x0000)
 #define SUPERVISION_TIMEOUT (0x07D0) // 2000

 /*=======================================================================*/

 /*=======================================================================*/
 //! Scan command parameters
 /*=======================================================================*/

 #define SL_WFX_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
 #define SL_WFX_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL

 //! Scan status
 #define SL_WFX_BLE_START_SCAN (0x01)
 #define SL_WFX_BLE_STOP_SCAN (0x00)

 //! Scan types
 #define SCAN_TYPE_ACTIVE (0x01)
 #define SCAN_TYPE_PASSIVE (0x00)

 //! Scan filters
 #define SCAN_FILTER_TYPE_ALL (0x00)
 #define SCAN_FILTER_TYPE_ONLY_WHITE_LIST (0x01)

 #define SL_WFX_SEL_INTERNAL_ANTENNA (0x00)
 #define SL_WFX_SEL_EXTERNAL_ANTENNA (0x01)

 #define SL_WFX_BT_CTRL_REMOTE_USER_TERMINATED (0x4E13)
 #define SL_WFX_BT_CTRL_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES (0x4E14)
 #define SL_WFX_BT_CTRL_REMOTE_POWERING_OFF (0x4E15)
 #define SL_WFX_BT_CTRL_TERMINATED_MIC_FAILURE (0x4E3D)
 #define SL_WFX_BT_FAILED_TO_ESTABLISH_CONN (0x4E3E)
 #define SL_WFX_BT_INVALID_RANGE (0x4E60)

 /***********************************************************************************************************************************************/
 //! RS9116 Firmware Configurations
 /***********************************************************************************************************************************************/
 /*=======================================================================*/
 //! Power save command parameters
 /*=======================================================================*/
 //! set handshake type of power mode
 #define RSI_HAND_SHAKE_TYPE GPIO_BASED

 #define BLE_ATT_REC_SIZE (500)
 #define NO_OF_VAL_ATT (5) //! Attribute value count

 /***********************************************************************************************************************************************/
 //! user defined structure
 /***********************************************************************************************************************************************/
 typedef struct rsi_ble_att_list_s
 {
     uuid_t char_uuid;
     uint16_t handle;
     uint16_t value_len;
     uint16_t max_value_len;
     uint8_t char_val_prop;
     void * value;
 } rsi_ble_att_list_t;
 typedef struct rsi_ble_s
 {
     uint8_t DATA[BLE_ATT_REC_SIZE];
     uint16_t DATA_ix;
     uint16_t att_rec_list_count;
     rsi_ble_att_list_t att_rec_list[NO_OF_VAL_ATT];
 } rsi_ble_t;

 #endif
	/*******************************************************************************
	* @file rsi_ble_config.h
	* @brief
	*******************************************************************************
	* # License
	* <b>Copyright 2020 Silicon Laboratories Inc. www.silabs.com</b>
	*******************************************************************************
	*
	* The licensor of this software is Silicon Laboratories Inc. Your use of this
	* software is governed by the terms of Silicon Labs Master Software License
	* Agreement (MSLA) available at
	* www.silabs.com/about-us/legal/master-software-license-agreement. This
	* software is distributed to you in Source Code format and is governed by the
	* sections of the MSLA applicable to Source Code.
	*
	******************************************************************************/

	#ifndef RSI_BLE_CONFIG_H
	#define RSI_BLE_CONFIG_H

	#include "rsi_ble_apis.h"
	#include <rsi_data_types.h>
	/******************************************************
	* * Macros
	* ******************************************************/
	//! application event list
	#define RSI_BLE_CONN_EVENT (0x01)
	#define RSI_BLE_DISCONN_EVENT (0x02)
	#define RSI_BLE_GATT_WRITE_EVENT (0x03)
	#define RSI_BLE_MTU_EVENT (0x04)
	#define RSI_BLE_GATT_INDICATION_CONFIRMATION (0x05)
	#define RSI_BLE_RESP_ATT_VALUE (0x06)
	#define RSI_SSID (0x0D)
	#define RSI_SECTYPE (0x0E)
	#define RSI_BLE_WLAN_DISCONN_NOTIFY (0x0F)
	#define RSI_WLAN_ALREADY (0x10)
	#define RSI_WLAN_NOT_ALREADY (0x11)
	#define RSI_BLE_WLAN_TIMEOUT_NOTIFY (0x12)
	#define RSI_BLE_WLAN_JOIN_STATUS (0x15)
	#define RSI_APP_FW_VERSION (0x13)
	#define RSI_BLE_WLAN_DISCONNECT_STATUS (0x14)

	#define RSI_REM_DEV_ADDR_LEN (18)
	#define RSI_REM_DEV_NAME_LEN (31)

	#define RSI_BLE_DEV_NAME "CCP_DEVICE"
	#define RSI_BLE_SET_RAND_ADDR "00:23:A7:12:34:56"

	#define CLEAR_WHITELIST (0x00)
	#define ADD_DEVICE_TO_WHITELIST (0x01)
	#define DELETE_DEVICE_FROM_WHITELIST (0x02)

	#define ALL_PHYS (0x00)

	#define RSI_BLE_DEV_ADDR_RESOLUTION_ENABLE (0)

	#define RSI_OPERMODE_WLAN_BLE (13)

	/***********************************************************************************************************************************************/
	//! Characteristic Presenatation Format Fields
	/***********************************************************************************************************************************************/
	#define RSI_BLE_UINT8_FORMAT (0x04)
	#define RSI_BLE_EXPONENT (0x00)
	#define RSI_BLE_PERCENTAGE_UNITS_UUID (0x27AD)
	#define RSI_BLE_NAME_SPACE (0x01)
	#define RSI_BLE_DESCRIPTION (0x010B)

	//! BLE characteristic custom service uuid
	#define RSI_BLE_CUSTOM_SERVICE_UUID (0xFFF6)
	#define RSI_BLE_CUSTOM_LEVEL_UUID (0x1FF1)

	#ifdef RSI_M4_INTERFACE
	#define RSI_BLE_MAX_NBR_ATT_REC (20)
	#define RSI_BLE_MAX_NBR_SLAVES (1)
	#define RSI_BLE_NUM_CONN_EVENTS (2)
	#else
	#define RSI_BLE_MAX_NBR_ATT_REC (80)
	#define RSI_BLE_MAX_NBR_SLAVES (3)
	#define RSI_BLE_NUM_CONN_EVENTS (20)
	#endif

	#define RSI_BLE_MAX_NBR_ATT_SERV (10)

	#define RSI_BLE_MAX_NBR_MASTERS (1)
	#define RSI_BLE_GATT_ASYNC_ENABLE (1)
	#define RSI_BLE_GATT_INIT (0)

	#define RSI_BLE_START_SCAN (0x01)
	#define RSI_BLE_STOP_SCAN (0x00)

	#define RSI_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
	#define RSI_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL
	/* Number of BLE GATT RECORD SIZE IN (n16 BYTES), eg:(0x4016)=1024 bytes */
	#define RSI_BLE_NUM_REC_BYTES (0x40)

	#define RSI_BLE_INDICATE_CONFIRMATION_FROM_HOST (0)

	/=======================================================================/
	//! Advertising command parameters
	/=======================================================================/

	#define RSI_BLE_ADV_TYPE UNDIR_CONN
	#define RSI_BLE_ADV_FILTER_TYPE ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY
	#define RSI_BLE_ADV_DIR_ADDR_TYPE LE_PUBLIC_ADDRESS
	#define RSI_BLE_ADV_DIR_ADDR "00:15:83:6A:64:17"

	//! Reduced the BLE adv interval time to match with EFR BLE
	#define RSI_BLE_ADV_INT_MIN (0x20)
	#define RSI_BLE_ADV_INT_MAX (0x20)

	#define RSI_BLE_ADV_CHANNEL_MAP (0x07)

	//! Advertise status
	//! Start the advertising process
	#define RSI_BLE_START_ADV (0x01)
	//! Stop the advertising process
	#define RSI_BLE_STOP_ADV (0x00)

	//! BLE Tx Power Index On Air
	#define RSI_BLE_PWR_INX (30)

	//! BLE Active H/w Pwr Features
	#define BLE_DISABLE_DUTY_CYCLING (0)
	#define BLE_DUTY_CYCLING (1)
	#define BLR_DUTY_CYCLING (2)
	#define BLE_4X_PWR_SAVE_MODE (4)
	#define RSI_BLE_PWR_SAVE_OPTIONS BLE_DISABLE_DUTY_CYCLING

	//! Advertise types

	/* Advertising will be visible(discoverable) to all the devices.
	* Scanning/Connection is also accepted from all devices
	* */
	#define UNDIR_CONN (0x80)

	/* Advertising will be visible(discoverable) to the particular device
	* mentioned in RSI_BLE_ADV_DIR_ADDR only.
	* Scanning and Connection will be accepted from that device only.
	* */
	#define DIR_CONN (0x81)

	/* Advertising will be visible(discoverable) to all the devices.
	* Scanning will be accepted from all the devices.
	* Connection will be not be accepted from any device.
	* */
	#define UNDIR_SCAN (0x82)

	/* Advertising will be visible(discoverable) to all the devices.
	* Scanning and Connection will not be accepted from any device
	* */
	#define UNDIR_NON_CONN (0x83)

	/* Advertising will be visible(discoverable) to the particular device
	* mentioned in RSI_BLE_ADV_DIR_ADDR only.
	* Scanning and Connection will be accepted from that device only.
	* */
	#define DIR_CONN_LOW_DUTY_CYCLE (0x84)

	//! Advertising flags
	#define LE_LIMITED_DISCOVERABLE (0x01)
	#define LE_GENERAL_DISCOVERABLE (0x02)
	#define LE_BR_EDR_NOT_SUPPORTED (0x04)

	//! Advertise filters
	#define ALLOW_SCAN_REQ_ANY_CONN_REQ_ANY (0x00)
	#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_ANY (0x01)
	#define ALLOW_SCAN_REQ_ANY_CONN_REQ_WHITE_LIST (0x02)
	#define ALLOW_SCAN_REQ_WHITE_LIST_CONN_REQ_WHITE_LIST (0x03)

	//! Address types
	#define LE_PUBLIC_ADDRESS (0x00)
	#define LE_RANDOM_ADDRESS (0x01)
	#define LE_RESOLVABLE_PUBLIC_ADDRESS (0x02)
	#define LE_RESOLVABLE_RANDOM_ADDRESS (0x03)

	/=======================================================================/

	/=======================================================================/
	//! Connection parameters
	/=======================================================================/
	#define LE_SCAN_INTERVAL (0x0100)
	#define LE_SCAN_WINDOW (0x0050)

	#define CONNECTION_INTERVAL_MIN (0x00A0)
	#define CONNECTION_INTERVAL_MAX (0x00A0)

	#define CONNECTION_LATENCY (0x0000)
	#define SUPERVISION_TIMEOUT (0x07D0) // 2000

	/=======================================================================/

	/=======================================================================/
	//! Scan command parameters
	/=======================================================================/

	#define SL_WFX_BLE_SCAN_TYPE SCAN_TYPE_ACTIVE
	#define SL_WFX_BLE_SCAN_FILTER_TYPE SCAN_FILTER_TYPE_ALL

	//! Scan status
	#define SL_WFX_BLE_START_SCAN (0x01)
	#define SL_WFX_BLE_STOP_SCAN (0x00)

	//! Scan types
	#define SCAN_TYPE_ACTIVE (0x01)
	#define SCAN_TYPE_PASSIVE (0x00)

	//! Scan filters
	#define SCAN_FILTER_TYPE_ALL (0x00)
	#define SCAN_FILTER_TYPE_ONLY_WHITE_LIST (0x01)

	#define SL_WFX_SEL_INTERNAL_ANTENNA (0x00)
	#define SL_WFX_SEL_EXTERNAL_ANTENNA (0x01)

	#define SL_WFX_BT_CTRL_REMOTE_USER_TERMINATED (0x4E13)
	#define SL_WFX_BT_CTRL_REMOTE_DEVICE_TERMINATED_CONNECTION_DUE_TO_LOW_RESOURCES (0x4E14)
	#define SL_WFX_BT_CTRL_REMOTE_POWERING_OFF (0x4E15)
	#define SL_WFX_BT_CTRL_TERMINATED_MIC_FAILURE (0x4E3D)
	#define SL_WFX_BT_FAILED_TO_ESTABLISH_CONN (0x4E3E)
	#define SL_WFX_BT_INVALID_RANGE (0x4E60)

	/***********************************************************************************************************************************************/
	//! RS9116 Firmware Configurations
	/***********************************************************************************************************************************************/
	/=======================================================================/
	//! Power save command parameters
	/=======================================================================/
	//! set handshake type of power mode
	#define RSI_HAND_SHAKE_TYPE GPIO_BASED

	#define BLE_ATT_REC_SIZE (500)
	#define NO_OF_VAL_ATT (5) //! Attribute value count

	/***********************************************************************************************************************************************/
	//! user defined structure
	/***********************************************************************************************************************************************/
	typedef struct rsi_ble_att_list_s
	{
	uuid_t char_uuid;
	uint16_t handle;
	uint16_t value_len;
	uint16_t max_value_len;
	uint8_t char_val_prop;
	void * value;
	} rsi_ble_att_list_t;
	typedef struct rsi_ble_s
	{
	uint8_t DATA[BLE_ATT_REC_SIZE];
	uint16_t DATA_ix;
	uint16_t att_rec_list_count;
	rsi_ble_att_list_t att_rec_list[NO_OF_VAL_ATT];
	} rsi_ble_t;

	#endif