| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.14. [TC-CADMIN-1.14] Open commissioning window twice on DUT using BCM |
| then ECM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| For DUT as comissioner test cases, Chip-tool command used below are an example to verify the functionality. For certification test, we expect DUT should have a capability or way to run the equivalent command. |
| disabled: true |
| |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "DUT_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| "1. Provision the device using your DUT controller (use above instructions) , |
| " |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR3 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On first controller, open commissioning window using BCM |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| |
| |
| |
| On 3rd controller, using chip tool connect to the accessory |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM and |
| TH_CR2 Commissions with TH_CE" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On first controller, open commissioning window using BCM |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| |
| |
| |
| On 2nd controller, using chip tool connect to the accessory |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On first controller, open commissioning window using BCM |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller, read WindowStatus |
| |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 1st controller chip tool, open commissioning window using ECM |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 4" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to re-opens a commissioning window |
| with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds using |
| ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 1st controller chip tool, open commissioning window using ECM |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established |
| [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!! |
| [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm] |
| [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma] |
| [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0. |
| [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec |
| [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen] |
| [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633] |
| [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10] |
| [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller, read WindowStatus |
| |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, TH_CR3 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 3rd controller chip tool, open commissioning window using ECM |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established |
| [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!! |
| [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm] |
| [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma] |
| [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0. |
| [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec |
| [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen] |
| [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633] |
| [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10] |
| [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 8" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 1st controller chip tool, open commissioning window using ECM |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| |
| [1635925713.966786][9695:9700] CHIP:SC: Success status report received. Session was established |
| [1635925713.966839][9695:9700] CHIP:IN: New secure session created for device 0x0000000000000001, key 33!! |
| [1635925713.966938][9695:9700] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635925713.972601][9695:9700] CHIP:DMG: ICR moving to [AddingComm] |
| [1635925713.972705][9695:9700] CHIP:DMG: ICR moving to [AddedComma] |
| [1635925713.972815][9695:9700] CHIP:IN: Prepared encrypted message 0xaaaad9b57d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 31056i with MessageCounter:0. |
| [1635925713.972876][9695:9700] CHIP:IN: Sending encrypted msg 0xaaaad9b57d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 13449459 msec |
| [1635925713.973006][9695:9700] CHIP:DMG: ICR moving to [CommandSen] |
| [1635925713.973061][9695:9700] CHIP:CTL: Manual pairing code: [36217551633] |
| [1635925713.973120][9695:9700] CHIP:CTL: SetupQRCode: [MT:00000CQM00A7F87ZT10] |
| [1635925713.973178][9695:9700] CHIP:EM: Sending Standalone Ack for MessageCounter:1964916542 on exchange 31055i |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 12, TH_CR2 sends command to TH_CE to open a second |
| commissioning window with a commissioning timeout of |
| PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On 2nd controller using chip tool connect to the accessory using ECM |
| |
| |
| ./chip-tool pairing open-commissioning-window 1 1 180 1000 3840 |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that is |
| set in step 12" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read WindowStatus attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller, read WindowStatus |
| |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2849200592 |
| [1651137648.760469][14047:14052] CHIP:TOO: WindowStatus: 0 |
| [1651137648.760534][14047:14052] CHIP:EM: Sending Standalone Ack for MessageCounter:5527412 on exchange 14590i" |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminFabricIndex attribute" |
| PICS: CADMIN.C.A0001 |
| verification: | |
| On first controller, read AdminFabricIndex |
| |
| ./chip-tool administratorcommissioning read admin-fabric-index 1 0 |
| |
| [1659097193.389295][11728:11733] CHIP:DMG: } |
| [1659097193.389588][11728:11733] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0001 DataVersion: 1299585105 |
| [1659097193.389731][11728:11733] CHIP:TOO: AdminFabricIndex: 0 |
| [1659097193.389913][11728:11733] CHIP:EM: Sending Standalone Ack for MessageCounter:195671426 on exchange 34244i |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminVendorId attribute" |
| PICS: CADMIN.C.A0002 |
| verification: | |
| On first controller, read AdminVendorId |
| |
| ./chip-tool administratorcommissioning read admin-vendor-id 1 0 |
| |
| [1658838521.588942][9317:9322] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0002 DataVersion: 2423106591 |
| [1658838521.589005][9317:9322] CHIP:TOO: AdminVendorId: 0 |
| [1658838521.589079][9317:9322] CHIP:EM: Sending Standalone Ack for MessageCounter:217165763 on exchange 55683i |
| disabled: true |
