blob: ebe9ef8c3db72dcb58b415da56a4c3cba9cb1634 [file] [log] [blame]
# Copyright (c) 2021 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default
name:
4.1.20. [TC-CADMIN-1.20] max number of Commissioned Fabrics and
SupportedFabrics rollover using BCM [DUT - Commissionee]
PICS:
- CADMIN.S
config:
nodeId: 0x12344321
cluster: "Basic"
endpoint: 0
tests:
- label: "Precondition"
verification: |
Reset Devices to factory defaults
disabled: true
- label: "TH_CR1 starts a commissioning process with DUT_CE"
PICS: CADMIN.S
verification: |
"1. Provision the device using 1st controller chip tool(use above instructions) ,
"
disabled: true
- label:
"TH_CR1 opens a commissioning window on DUT_CE using a commissioning
timeout of PIXIT.CADMIN.CwDuration seconds using BCM"
PICS: CADMIN.S.C01.Rsp
verification: |
On 1st controller chip tool, open commissioning window using BCM
Below is the example when using chip tool as controller
./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000
CHIP:DMG: InvokeResponseMessage =
[1649756654.928453][3385:3390] CHIP:DMG: {
[1649756654.928511][3385:3390] CHIP:DMG: suppressResponse = false,
[1649756654.928571][3385:3390] CHIP:DMG: InvokeResponseIBs =
[1649756654.928647][3385:3390] CHIP:DMG: [
[1649756654.928708][3385:3390] CHIP:DMG: InvokeResponseIB =
[1649756654.928794][3385:3390] CHIP:DMG: {
[1649756654.928864][3385:3390] CHIP:DMG: CommandStatusIB =
[1649756654.928948][3385:3390] CHIP:DMG: {
[1649756654.929021][3385:3390] CHIP:DMG: CommandPathIB =
[1649756654.929109][3385:3390] CHIP:DMG: {
[1649756654.929191][3385:3390] CHIP:DMG: EndpointId = 0x0,
[1649756654.929284][3385:3390] CHIP:DMG: ClusterId = 0x3c,
[1649756654.929376][3385:3390] CHIP:DMG: CommandId = 0x1,
[1649756654.929459][3385:3390] CHIP:DMG: },
[1649756654.929551][3385:3390] CHIP:DMG:
[1649756654.929632][3385:3390] CHIP:DMG: StatusIB =
[1649756654.929720][3385:3390] CHIP:DMG: {
[1649756654.929804][3385:3390] CHIP:DMG: status = 0x00 (SUCCESS),
[1649756654.929878][3385:3390] CHIP:DMG: },
[1649756654.929946][3385:3390] CHIP:DMG:
[1649756654.930017][3385:3390] CHIP:DMG: },
[1649756654.930109][3385:3390] CHIP:DMG:
[1649756654.930176][3385:3390] CHIP:DMG: },
[1649756654.930256][3385:3390] CHIP:DMG:
[1649756654.930314][3385:3390] CHIP:DMG: ],
[1649756654.930389][3385:3390] CHIP:DMG:
[1649756654.930448][3385:3390] CHIP:DMG: InteractionModelRevision = 1
[1649756654.930555][3385:3390] CHIP:DMG: },
[1649756654.930703][3385:3390] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0
[1649756654.930801][3385:3390] CHIP:DMG: ICR moving to [AwaitingDe]
disabled: true
- label: "THn starts a commissioning process with DUT_CE"
PICS: CADMIN.S
verification: |
On nth controller using chip tool connect to the accessory
./chip-tool pairing onnetwork 2 20202021
Verify you got below message
Device commissioning completed with success
disabled: true
- label:
"Repeat Step 3 and Step 4 an additional (SupportedFabrics - 2) times
to reach an index value of SupportedFabrics on DUT_CE"
PICS: CADMIN.S.C01.Rsp
verification: |
Repeat step 3 until CommissionedFabrics=SupportedFabrics
disabled: true
- label:
"THn starts a commissioning process and opens a commissioning window
with DUT_CE"
PICS: CADMIN.S.C01.Rsp
verification: |
On nth controller using chip tool connect to the accessory
./chip-tool pairing onnetwork 6 20202021
CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008
[1649756670.402192][10794:10799] CHIP:CTL: Device returned status 5 on receiving the NOC
[1649756670.402221][10794:10799] CHIP:CTL: Add NOC failed with error ../../third_party/connectedhomeip/src/controller/CHIPDeviceController.cpp:1110: CHIP Error 0x0000000B: No memory
[1649756670.402241][10794:10799] CHIP:CTL: Failed to perform commissioning step 12
disabled: true
- label: "TH_CR1 removes FabricIndex1"
PICS: OPCREDS.S.C0a.Rsp
verification: |
on 1st controller using chip tool, remove fabric with FabricIndex=1
./chip-tool operationalcredentials remove-fabric 1 1 0
disabled: true