blob: 05065105d207f478bc01b8ca20069278aeb2ae14 [file] [log] [blame]
/*
*
* Copyright (c) 2020 Project CHIP Authors
* Copyright (c) 2019-2020 Google LLC.
* Copyright (c) 2018 Nest Labs, Inc.
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
/**
* @file
* Defines compile-time configuration values for the chip Device Layer.
*/
#pragma once
#if CHIP_HAVE_CONFIG_H
#include <platform/CHIPDeviceBuildConfig.h>
#endif
#include <lib/core/CHIPConfig.h>
/* Include a project-specific configuration file, if defined.
*
* An application or module that incorporates the chip Device Layer can define a project
* configuration file to override standard chip configuration with application-specific
* values. The project config file is typically located outside the Openchip source
* tree, alongside the source code for the application.
*/
#ifdef CHIP_DEVICE_PROJECT_CONFIG_INCLUDE
#include CHIP_DEVICE_PROJECT_CONFIG_INCLUDE
#endif
/* Include a platform-specific configuration file, if defined.
*
* A platform configuration file contains overrides to standard chip Device Layer
* configuration that are specific to the platform or OS on which chip is running.
* It is typically provided as apart of an adaptation layer that adapts Openchip
* to the target environment. This adaptation layer may be included in the Openchip
* source tree itself or implemented externally.
*/
#ifdef CHIP_DEVICE_PLATFORM_CONFIG_INCLUDE
#include CHIP_DEVICE_PLATFORM_CONFIG_INCLUDE
#endif
// -------------------- General Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_CHIP_TASK_NAME
*
* The name of the chip task.
*/
#ifndef CHIP_DEVICE_CONFIG_CHIP_TASK_NAME
#define CHIP_DEVICE_CONFIG_CHIP_TASK_NAME "CHIP"
#endif
/**
* CHIP_DEVICE_CONFIG_CHIP_TASK_STACK_SIZE
*
* The size (in bytes) of the chip task stack.
*/
#ifndef CHIP_DEVICE_CONFIG_CHIP_TASK_STACK_SIZE
#define CHIP_DEVICE_CONFIG_CHIP_TASK_STACK_SIZE 4096
#endif
/**
* CHIP_DEVICE_CONFIG_CHIP_TASK_PRIORITY
*
* The priority of the chip task.
*/
#ifndef CHIP_DEVICE_CONFIG_CHIP_TASK_PRIORITY
#define CHIP_DEVICE_CONFIG_CHIP_TASK_PRIORITY 1
#endif
/**
* CHIP_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE
*
* The maximum number of events that can be held in the chip Platform event queue.
*/
#ifndef CHIP_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE
#define CHIP_DEVICE_CONFIG_MAX_EVENT_QUEUE_SIZE 100
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_SED
*
* Enable support for sleepy end device behavior.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_SED
#define CHIP_DEVICE_CONFIG_ENABLE_SED 0
#endif
/**
* CHIP_DEVICE_CONFIG_SED_IDLE_INTERVAL
*
* The default amount of time in milliseconds that the sleepy end device will use as an idle interval.
* This interval is used by the device to periodically wake up and poll the data in the idle mode.
*/
#ifndef CHIP_DEVICE_CONFIG_SED_IDLE_INTERVAL
#define CHIP_DEVICE_CONFIG_SED_IDLE_INTERVAL 5000_ms32
#endif
/**
* CHIP_DEVICE_CONFIG_SED_ACTIVE_INTERVAL
*
* The default amount of time in milliseconds that the sleepy end device will use as an active interval.
* This interval is used by the device to periodically wake up and poll the data in the active mode.
*/
#ifndef CHIP_DEVICE_CONFIG_SED_ACTIVE_INTERVAL
#define CHIP_DEVICE_CONFIG_SED_ACTIVE_INTERVAL 200_ms32
#endif
// -------------------- Device Identification Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_DEVICE_VENDOR_NAME
*
* Human readable vendor name for the organization responsible for producing the device.
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_VENDOR_NAME
#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_NAME "TEST_VENDOR"
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
*
* The CHIP-assigned vendor id for the organization responsible for producing the device.
*
* Default is the Test VendorID of 0xFFF1.
*
* Un-overridden default must match the default test DAC
* (see src/credentials/examples/DeviceAttestationCredsExample.cpp).
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID
#define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME
*
* Human readable name of the device model.
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME
#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME "TEST_PRODUCT"
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
*
* The unique id assigned by the device vendor to identify the product or device type. This
* number is scoped to the device vendor id.
*
* Un-overridden default must either match one of the given development certs
* or have a DeviceAttestationCredentialsProvider implemented.
* (see src/credentials/examples/DeviceAttestationCredsExample.cpp)
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID
#define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8001
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION_STRING
*
* Human readable string identifying version of the product assigned by the device vendor.
*/
#ifndef CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION_STRING
#define CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION_STRING "TEST_VERSION"
#endif
/**
* CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION
*
* The default hardware version number assigned to the device or product by the device vendor.
*
* Hardware versions are specific to a particular device vendor and product id, and typically
* correspond to a revision of the physical device, a change to its packaging, and/or a change
* to its marketing presentation. This value is generally *not* incremented for device software
* revisions.
*
* This is a default value which is used when a hardware version has not been stored in device
* persistent storage (e.g. by a factory provisioning process).
*/
#ifndef CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION
#define CHIP_DEVICE_CONFIG_DEFAULT_DEVICE_HARDWARE_VERSION 0
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING
*
* A string identifying the software version running on the device.
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING
#define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING "1.0"
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION
*
* A monothonic number identifying the software version running on the device.
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION
#define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION 0
#endif
/**
* CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER
*
* Enables the use of a hard-coded default serial number if none
* is found in Chip NV storage.
*/
#ifndef CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER
#define CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER "TEST_SN"
#endif
/**
* CHIP_DEVICE_CONFIG_FAILSAFE_EXPIRY_LENGTH_SEC
*
* The default conservative initial duration (in seconds) to set in the FailSafe for the commissioning
* flow to complete successfully. This may vary depending on the speed or sleepiness of the Commissionee.
*/
#ifndef CHIP_DEVICE_CONFIG_FAILSAFE_EXPIRY_LENGTH_SEC
#define CHIP_DEVICE_CONFIG_FAILSAFE_EXPIRY_LENGTH_SEC 60
#endif // CHIP_DEVICE_CONFIG_FAILSAFE_EXPIRY_LENGTH_SEC
/**
* CHIP_DEVICE_CONFIG_MAX_CUMULATIVE_FAILSAFE_SEC
*
* The default conservative value in seconds denoting the maximum total duration for which a fail safe
* timer can be re-armed.
*/
#ifndef CHIP_DEVICE_CONFIG_MAX_CUMULATIVE_FAILSAFE_SEC
#define CHIP_DEVICE_CONFIG_MAX_CUMULATIVE_FAILSAFE_SEC 900
#endif // CHIP_DEVICE_CONFIG_MAX_CUMULATIVE_FAILSAFE_SEC
/**
* CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION
*
* Whether a device supports "concurrent connection commissioning mode" (1) or
* or "non-concurrenct connection commissioning mode" (0).
*
* See section "5.5. Commissioning Flows" in spec for definition.
*
* The default value is to support concurrent connection.
*/
#ifndef CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION
#define CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION 1
#endif // CHIP_DEVICE_CONFIG_SUPPORTS_CONCURRENT_CONNECTION
/**
* CHIP_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC
*
* The default amount of time (in whole seconds) that the device will remain in "user selected"
* mode. User selected mode is typically initiated by a button press, or other direct interaction
* by a user. While in user selected mode, the device will respond to Device Identify Requests
* that have the UserSelectedMode flag set.
*/
#ifndef CHIP_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC
#define CHIP_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC 30
#endif // CHIP_DEVICE_CONFIG_USER_SELECTED_MODE_TIMEOUT_SEC
/**
* CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID
*
* Enables the use of a hard-coded default unique ID utilized for the rotating device ID calculation.
*/
#ifndef CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID
#define CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID \
{ \
0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff \
}
#endif
/**
* CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID_LENGTH
*
* Unique ID length in bytes. The value should be 16-bytes or longer.
*/
#ifndef CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID_LENGTH
#define CHIP_DEVICE_CONFIG_ROTATING_DEVICE_ID_UNIQUE_ID_LENGTH 16
#endif
// -------------------- WiFi Station Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_ENABLE_WIFI_STATION
*
* Enable support for a WiFi station interface.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_WIFI_STATION
#define CHIP_DEVICE_CONFIG_ENABLE_WIFI_STATION 1
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL
*
* The interval at which the chip platform will attempt to reconnect to the configured WiFi
* network (in milliseconds).
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL
#define CHIP_DEVICE_CONFIG_WIFI_STATION_RECONNECT_INTERVAL 5000
#endif
/**
* CHIP_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS
*
* The maximum number of networks to return as a result of a NetworkProvisioning:ScanNetworks request.
*/
#ifndef CHIP_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS
#define CHIP_DEVICE_CONFIG_MAX_SCAN_NETWORKS_RESULTS 10
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT
*
* The amount of time (in milliseconds) after which the chip platform will timeout a WiFi scan
* operation that hasn't completed. A value of 0 will disable the timeout logic.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT
#define CHIP_DEVICE_CONFIG_WIFI_SCAN_COMPLETION_TIMEOUT 10000
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT
*
* The amount of time (in milliseconds) to wait for Internet connectivity to be established on
* the device's WiFi station interface during a Network Provisioning TestConnectivity operation.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT
#define CHIP_DEVICE_CONFIG_WIFI_CONNECTIVITY_TIMEOUT 30000
#endif
/**
* CHIP_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME
*
* Name of the WiFi station interface on LwIP-based platforms.
*/
#ifndef CHIP_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME
#define CHIP_DEVICE_CONFIG_LWIP_WIFI_STATION_IF_NAME "wl"
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME
*
* Name of the WiFi station interface
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME
#define CHIP_DEVICE_CONFIG_WIFI_STATION_IF_NAME "wlan0"
#endif
// -------------------- WiFi AP Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_ENABLE_WIFI_AP
*
* Enable support for a WiFi AP interface.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_WIFI_AP
#define CHIP_DEVICE_CONFIG_ENABLE_WIFI_AP 0
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX
*
* A prefix string used in forming the WiFi soft-AP SSID. The remainder of the SSID
* consists of the final two bytes of the device's primary WiFi MAC address in hex.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX
#define CHIP_DEVICE_CONFIG_WIFI_AP_SSID_PREFIX "MATTER-"
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_AP_CHANNEL
*
* The WiFi channel number to be used by the soft-AP.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_AP_CHANNEL
#define CHIP_DEVICE_CONFIG_WIFI_AP_CHANNEL 1
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS
*
* The maximum number of stations allowed to connect to the soft-AP.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS
#define CHIP_DEVICE_CONFIG_WIFI_AP_MAX_STATIONS 4
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL
*
* The beacon interval (in milliseconds) for the WiFi soft-AP.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL
#define CHIP_DEVICE_CONFIG_WIFI_AP_BEACON_INTERVAL 100
#endif
/**
* CHIP_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT
*
* The amount of time (in milliseconds) after which the chip platform will deactivate the soft-AP
* if it has been idle.
*/
#ifndef CHIP_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT
#define CHIP_DEVICE_CONFIG_WIFI_AP_IDLE_TIMEOUT 120000
#endif
/**
* CHIP_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME
*
* Name of the WiFi AP interface on LwIP-based platforms.
*/
#ifndef CHIP_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME
#define CHIP_DEVICE_CONFIG_LWIP_WIFI_AP_IF_NAME "ap"
#endif
// -------------------- BLE/CHIPoBLE Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
*
* Enable support for chip-over-BLE (CHIPoBLE).
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE
#define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 0
#endif
/**
* CHIP_DEVICE_CONFIG_SINGLE_CHIPOBLE_CONNECTION
*
* Limit support for chip-over-BLE (CHIPoBLE) to a single connection.
* When set, CHIPoBLE advertisements will stop while a CHIPoBLE connection is active.
*/
#ifndef CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION
#define CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION 1
#endif
/**
* CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART
*
* Enable CHIPoBLE advertising start automatically after device power-up.
*
* CHIP's device may start advertising automatically only if its all primary device
* functions are within a CHIP network. Device providing unrelated to CHIP functionalities
* should not start advertising automatically after power-up.
*
* TODO: Default value should be changed to 0, after all platforms will implement enabling
* advertisement in their own way.
*/
#ifndef CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART
#define CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART 1
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_PAIRING_AUTOSTART
*
* Enable opening pairing window automatically after device power-up.
*
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_PAIRING_AUTOSTART
#define CHIP_DEVICE_CONFIG_ENABLE_PAIRING_AUTOSTART 1
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX
*
* A prefix string used in forming the BLE device name. The remainder of the name
* typically contains the setup discriminator as a 4-digit decimal number.
*
* NOTE: The device layer limits the total length of a device name to 16 characters.
* However, due to other data sent in CHIPoBLE advertise packets, the device name
* may need to be shorter.
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX
#define CHIP_DEVICE_CONFIG_BLE_DEVICE_NAME_PREFIX "MATTER-"
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN
*
* The minimum interval (in units of 0.625ms) at which the device will send BLE advertisements while
* in fast advertising mode. The minimum interval should be less and not equal to the
* CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX.
*
* Defaults to 32 (20 ms).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN
#define CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN 32
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX
*
* The maximum interval (in units of 0.625ms) at which the device will send BLE advertisements while
* in fast advertising mode. The maximum interval should be greater and not equal to the
* CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MIN.
*
* Defaults to 96 (60 ms).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX
#define CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL_MAX 96
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN
*
* The minimum interval (in units of 0.625ms) at which the device will send BLE advertisements while
* in slow advertising mode. The minimum interval should be greater and not equal to the
* CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX.
*
* Defaults to 240 (150 ms).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN
#define CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN 240
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX
*
* The maximum interval (in units of 0.625ms) at which the device will send BLE advertisements while
* in slow advertising mode. The maximum interval should be greater and not equal to the
* CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MIN.
*
* Defaults to 1920 (1200 ms).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX
#define CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL_MAX 1920
#endif
/**
* CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME
*
* The amount of time in miliseconds after which BLE advertisement should be switched from the fast
* advertising to the slow advertising, counting from the moment of advertisement commencement.
*
* Defaults to 30000 (30 seconds).
*/
#ifndef CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME
#define CHIP_DEVICE_CONFIG_BLE_ADVERTISING_INTERVAL_CHANGE_TIME 30000
#endif
// -------------------- Service Provisioning Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID
*
* Specifies the service endpoint id of the chip Service Provisioning service. When a device
* undergoes service provisioning, this is the endpoint to which it will send its Pair Device
* to Account request.
*/
#ifndef CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID
#define CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_ENDPOINT_ID 0x18B4300200000010ULL
#endif
/**
* CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT
*
* The maximum amount of time (in milliseconds) to wait for service connectivity during the device
* service provisioning step. More specifically, this is the maximum amount of time the device will
* wait for connectivity to be established with the service at the point where the device waiting
* to send a Pair Device to Account request to the Service Provisioning service.
*/
#ifndef CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT
#define CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_CONNECTIVITY_TIMEOUT 10000
#endif
/**
* CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT
*
* Specifies the maximum amount of time (in milliseconds) to wait for a response from the Service
* Provisioning service.
*/
#ifndef CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT
#define CHIP_DEVICE_CONFIG_SERVICE_PROVISIONING_REQUEST_TIMEOUT 10000
#endif
// -------------------- Thread Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_ENABLE_THREAD
*
* Enable support for Thread in the chip Device Layer.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD 0
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_FTD
*
* Enable Full Thread Device features
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_FTD
#define CHIP_DEVICE_CONFIG_THREAD_FTD 1
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_SSED
*
* Enable support for Thread Synchronized Sleepy End Device behavior.
*
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_SSED
#define CHIP_DEVICE_CONFIG_THREAD_SSED 0
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_TASK_NAME
*
* The name of the Thread task.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_TASK_NAME
#define CHIP_DEVICE_CONFIG_THREAD_TASK_NAME "THREAD"
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE
*
* The size (in bytes) of the OpenThread task stack.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE
#define CHIP_DEVICE_CONFIG_THREAD_TASK_STACK_SIZE 8192
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_TASK_PRIORITY
*
* The priority of the OpenThread task.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_TASK_PRIORITY
#define CHIP_DEVICE_CONFIG_THREAD_TASK_PRIORITY 2
#endif
/**
* CHIP_DEVICE_CONFIG_LWIP_THREAD_IF_NAME
*
* Name of the Thread interface on LwIP-based platforms.
*/
#ifndef CHIP_DEVICE_CONFIG_LWIP_THREAD_IF_NAME
#define CHIP_DEVICE_CONFIG_LWIP_THREAD_IF_NAME "th"
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_IF_MTU
*
* Default MTU for Thread interface
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_IF_MTU
#define CHIP_DEVICE_CONFIG_THREAD_IF_MTU 1280
#endif
/**
* CHIP_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX
*
* A prefix string to be used when forming a default Thread network name.
*/
#ifndef CHIP_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX
#define CHIP_DEVICE_CONFIG_DEFAULT_THREAD_NETWORK_NAME_PREFIX "CHIP-PAN-"
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT
*
* The amount of time (in milliseconds) to wait for connectivity with a Thread mesh
* to be established on during a Network Provisioning TestConnectivity operation.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT
#define CHIP_DEVICE_CONFIG_THREAD_CONNECTIVITY_TIMEOUT 30000
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_ENABLE_CLI
*
* Enable Thread CLI interface at initialisation.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_ENABLE_CLI
#define CHIP_DEVICE_CONFIG_THREAD_ENABLE_CLI 0
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT
*
* Enable support to DNS-SD SRP client usage for service advertising and discovery in CHIP.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_SRP_CLIENT 0
#endif
/**
* CHIP_DEVICE_CONFIG_THREAD_SRP_MAX_SERVICES
*
* Amount of services available for advertising using SRP.
*/
#ifndef CHIP_DEVICE_CONFIG_THREAD_SRP_MAX_SERVICES
#if CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY && CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY
#define CHIP_DEVICE_CONFIG_THREAD_SRP_MAX_SERVICES (CHIP_CONFIG_MAX_FABRICS + 3)
#elif CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY || CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY
#define CHIP_DEVICE_CONFIG_THREAD_SRP_MAX_SERVICES (CHIP_CONFIG_MAX_FABRICS + 2)
#else
#define CHIP_DEVICE_CONFIG_THREAD_SRP_MAX_SERVICES (CHIP_CONFIG_MAX_FABRICS + 1)
#endif
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_THREAD_COMMISSIONABLE_DISCOVERY
*
* Enable support to Commissionable Discovery for Thread devices.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD_COMMISSIONABLE_DISCOVERY
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_COMMISSIONABLE_DISCOVERY 0
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_THREAD_DNS_CLIENT
*
* Enable support to DNS client usage for resolving and browsing services in CHIP.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD_DNS_CLIENT
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_DNS_CLIENT 0
#endif
// -------------------- Network Telemetry Configuration --------------------
/**
* @def CHIP_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY
*
* @brief
* Enable automatically uploading Wi-Fi telemetry via trait on an interval.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY
#define CHIP_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY (0)
#endif
/**
* @def CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
*
* @brief
* Enable automatically uploading minimal Thread telemetry and topology via trait on an interval.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY (0)
#endif
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY && !CHIP_DEVICE_CONFIG_ENABLE_THREAD
#error "If CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY set, then CHIP_DEVICE_CONFIG_ENABLE_THREAD must also be set."
#endif
/**
* @def CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL
*
* @brief
* Enable automatically uploading all Thread telemetry and topology via trait on an interval.
* This is suitable for products that have router capability.
*
* @note
* If set, CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY must also be set.
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL
#define CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL (0)
#endif
#if CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL && !CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY
#error "If CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY_FULL set, then CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY must also be set."
#endif
// Enable Network Telemetry feature if it is enabled for at lease one network.
#define CHIP_DEVICE_CONFIG_ENABLE_NETWORK_TELEMETRY \
(CHIP_DEVICE_CONFIG_ENABLE_WIFI_TELEMETRY || CHIP_DEVICE_CONFIG_ENABLE_THREAD_TELEMETRY)
/**
* @def CHIP_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS
*
* @brief
* This sets the default interval at which network telemetry events
* will be logged to chip buffers. This can be overwritten at runtime
* with a trait.
*
*/
#ifndef CHIP_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS
#define CHIP_DEVICE_CONFIG_DEFAULT_TELEMETRY_INTERVAL_MS 90000
#endif
// -------------------- Test Setup (PASE) Configuration --------------------
/**
* @def CHIP_DEVICE_CONFIG_ENABLE_TEST_SETUP_PARAMS
*
* @brief
* Enable use of test setup parameters for testing purposes only.
*
* @note
* WARNING: This option makes it possible to circumvent basic chip security functionality.
* Because of this it SHOULD NEVER BE ENABLED IN PRODUCTION BUILDS.
*/
// TODO: When the SDK code is production ready this should be set to 0 and each platform
// will need to enable it indivually when needed.
#ifndef CHIP_DEVICE_CONFIG_ENABLE_TEST_SETUP_PARAMS
#define CHIP_DEVICE_CONFIG_ENABLE_TEST_SETUP_PARAMS 1
#endif
#if CHIP_DEVICE_CONFIG_ENABLE_TEST_SETUP_PARAMS
/**
* @def CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE
*
* @brief
* Test Spake2p passcode to use if actual passcode value is not provisioned in the device memory.
*/
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021
#endif
/**
* @def CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR
*
* @brief
* Test setup discriminator to use if actual discriminator value is not provisioned in the device memory.
*/
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR
#define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00
#endif
/**
* @def CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_ITERATION_COUNT
*
* @brief
* Test Spake2p iteration count to use if actual iteration count value is not provisioned in the device memory.
*/
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_ITERATION_COUNT
#define CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_ITERATION_COUNT 1000
#endif
/**
* @def CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT
*
* @brief
* Test Spake2p Salt to use if actual salt value is not provisioned in the device memory.
* @note
* The value is base-64 encoded string.
*/
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT
#define CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT "U1BBS0UyUCBLZXkgU2FsdA=="
#define CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT_DEFAULT
#endif
/**
* @def CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_VERIFIER
*
* @brief
* Test Spake2p Verifier to use if actual verifier value is not provisioned in the device memory.
* @note
* The value is base-64 encoded string.
*/
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_VERIFIER
#if CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE != 20202021
#error "Non-default Spake2+ passcode configured but verifier left unchanged"
#endif
#if CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_ITERATION_COUNT != 1000
#error "Non-default Spake2+ iteration count configured but verifier left unchanged"
#endif
#ifndef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT_DEFAULT
#error "Non-default Spake2+ salt configured but verifier left unchanged"
#endif
// Generated with: spake2p gen-verifier -o - -i 1000 -s "U1BBS0UyUCBLZXkgU2FsdA==" -p 20202021
#define CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_VERIFIER \
"uWFwqugDNGiEck/po7KHwwMwwqZgN10XuyBajPGuyzUEV/iree4lOrao5GuwnlQ65CJzbeUB49s31EH+NEkg0JVI5MGCQGMMT/SRPFNRODm3wH/MBiehuFc6FJ/" \
"NH6Rmzw=="
#endif
#else
#undef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE
#undef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR
#undef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_ITERATION_COUNT
#undef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_SALT
#undef CHIP_DEVICE_CONFIG_USE_TEST_SPAKE2P_VERIFIER
#endif
// -------------------- Event Logging Configuration --------------------
/**
* @def CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE
*
* @brief
* A size, in bytes, of the individual critical event logging buffer.
* Note: the critical event buffer must exist.
*/
#ifndef CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE
#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE (1024)
#endif
#if (CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE <= 0)
#error "The Prod critical event buffer must exist (CHIP_DEVICE_CONFIG_EVENT_LOGGING_CRIT_BUFFER_SIZE > 0)"
#endif
/**
* @def CHIP_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE
*
* @brief
* A size, in bytes, of the individual info event logging buffer.
* Note: set to 0 to disable info event buffer and all support
* for the info level events.
*/
#ifndef CHIP_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE
#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_INFO_BUFFER_SIZE (512)
#endif
/**
* @def CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
*
* @brief
* A size, in bytes, of the individual debug event logging buffer.
* Note: set to 0 to disable debug event buffer and all support
* for the debug level events.
*/
#ifndef CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE
#define CHIP_DEVICE_CONFIG_EVENT_LOGGING_DEBUG_BUFFER_SIZE (512)
#endif
/**
* @def CHIP_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH
*
* @brief
* The event id counter persisted storage epoch.
*/
#ifndef CHIP_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH
#define CHIP_DEVICE_CONFIG_EVENT_ID_COUNTER_EPOCH (0x10000)
#endif
// -------------------- Software Update Manager Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER
*
* Enable or disable the chip Software Update Manager.
*
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER
#define CHIP_DEVICE_CONFIG_ENABLE_SOFTWARE_UPDATE_MANAGER 1
#endif
/**
* CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN
*
* Specifies the size in bytes of the buffer that stores the
* URI
*
*/
#ifndef CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN
#define CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_URI_LEN 128
#endif
/**
* CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID
*
* Specifies the service endpoint id of the chip Software Update service. When a device
* attempts software update, this is the endpoint to which it will send its Software Update
* Query request.
*/
#ifndef CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID
#define CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_ENDPOINT_ID 0x18B4300200000002ULL
#endif
/**
* CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID
*
* Specifies the service endpoint id of the chip File Download service. When a device
* attempts file download over BDX, this is the endpoint to which it will send its BDX request.
*/
#ifndef CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID
#define CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_ENDPOINT_ID 0x18B4300200000013ULL
#endif
/**
* CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPONSE_TIMEOUT
*
* Specifies the maximum amount of time (in milliseconds) to wait for a response from a
* chip Software Update service.
*
*/
#ifndef CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPONSE_TIMEOUT
#define CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_RESPONSE_TIMEOUT 10000
#endif
/**
* CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_RESPONSE_TIMEOUT
*
* Specifies the maximum amount of time (in milliseconds) to wait for a response from a
* chip File Download service.
*
*/
#ifndef CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_RESPONSE_TIMEOUT
#define CHIP_DEVICE_CONFIG_FILE_DOWNLOAD_RESPONSE_TIMEOUT 10000
#endif
/**
* CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES
*
* Specifies the maximum number of times a failed software is retried.
*
*/
#ifndef CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES
#define CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_RETRIES 5
#endif
/**
* CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS
*
* If scheduled software update check is disabled & default retry policy is used,
* specify the max wait time interval to be used (in milliseconds)
*/
#ifndef CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS
#define CHIP_DEVICE_CONFIG_SOFTWARE_UPDATE_MAX_WAIT_TIME_INTERVAL_MS 1 * 60 * 60 * 1000 // 1 hour
#endif
/**
* @def CHIP_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP
*
* @brief
* If default software update retry policy is used,
* specify the minimum wait
* time as a percentage of the max wait interval for that step.
*
*/
#ifndef CHIP_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP
#define CHIP_DEVICE_CONFIG_SWU_MIN_WAIT_TIME_INTERVAL_PERCENT_PER_STEP 50
#endif
/**
* @def CHIP_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS
*
* @brief
* If default software update retry policy is used,
* specify the multiplier that multiplies the result of a Fibonacci computation
* based on a specific index to provide a max wait time for
* a step.
*
*/
#ifndef CHIP_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS
#define CHIP_DEVICE_CONFIG_SWU_WAIT_TIME_MULTIPLIER_MS 1 * 60 * 1000 // 1 minute
#endif
/**
* CHIP_DEVICE_CONFIG_SWU_BDX_BLOCK_SIZE
*
* Specifies the block size to be used during software download over BDX.
*/
#define CHIP_DEVICE_CONFIG_SWU_BDX_BLOCK_SIZE 1024
/**
* CHIP_DEVICE_CONFIG_FIRWMARE_BUILD_DATE
*
* Specifies the date of the build. Useful for deterministic builds.
*/
#ifndef CHIP_DEVICE_CONFIG_FIRMWARE_BUILD_DATE
#define CHIP_DEVICE_CONFIG_FIRMWARE_BUILD_DATE __DATE__
#endif
/**
* CHIP_DEVICE_CONFIG_FIRMWARE_BUILD_TIME
*
* Specifies the time of the build. Useful for deterministic builds.
*/
#ifndef CHIP_DEVICE_CONFIG_FIRMWARE_BUILD_TIME
#define CHIP_DEVICE_CONFIG_FIRMWARE_BUILD_TIME __TIME__
#endif
// -------------------- Device DNS-SD Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_DISCOVERY_TIMEOUT_SECS
*
* Time in seconds that a factory new device will advertise commissionable node discovery.
*/
#ifndef CHIP_DEVICE_CONFIG_DISCOVERY_TIMEOUT_SECS
#define CHIP_DEVICE_CONFIG_DISCOVERY_TIMEOUT_SECS (15 * 60)
#endif
/**
* CHIP_DEVICE_CONFIG_MAX_DISCOVERED_NODES
*
* Maximum number of CHIP Commissioners or Commissionable Nodes that can be discovered
*/
#ifndef CHIP_DEVICE_CONFIG_MAX_DISCOVERED_NODES
#define CHIP_DEVICE_CONFIG_MAX_DISCOVERED_NODES 10
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY
*
* Enable or disable whether this device advertises as a commissioner.
*
* Depends upon CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE set to 1
*
* For Video Players, this value will be 1
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY
#define CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY 0
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE
*
* Enable including commissioner code (CHIPDeviceController.cpp) in the commissionee (Server.cpp) code.
*
* For Video Players, this value will be 1
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE
#define CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE 0
#endif
/**
* CHIP_CONFIG_UNSAFE_SUBSCRIPTION_EXCHANGE_MANAGER_USE
*
* See issue 23625.
*
* Needs to be 1 when the following is 1:
* CHIP_DEVICE_CONFIG_ENABLE_BOTH_COMMISSIONER_AND_COMMISSIONEE
*/
#ifndef CHIP_CONFIG_UNSAFE_SUBSCRIPTION_EXCHANGE_MANAGER_USE
#define CHIP_CONFIG_UNSAFE_SUBSCRIPTION_EXCHANGE_MANAGER_USE 0
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY_CLIENT
*
* Enable or disable whether this device will attempt to
* discover commissioners and send Uder Directed Commissioning
* messages to them.
*
* For Video Player Clients, this value will be 1
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY_CLIENT
#define CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONER_DISCOVERY_CLIENT 0
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY
*
* Enable or disable whether this device advertises when not in commissioning mode.
*
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY
#define CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY 0
#endif
/**
* CHIP_DEVICE_CONFIG_EXTENDED_DISCOVERY_TIMEOUT_SECS
*
* Default time in seconds that a device will advertise commissionable node discovery
* after commissioning mode ends. This value can be overridden by the user.
*
* Only valid when CHIP_DEVICE_CONFIG_ENABLE_EXTENDED_DISCOVERY==1
*/
#define CHIP_DEVICE_CONFIG_DISCOVERY_DISABLED 0
#define CHIP_DEVICE_CONFIG_DISCOVERY_NO_TIMEOUT -1
#ifndef CHIP_DEVICE_CONFIG_EXTENDED_DISCOVERY_TIMEOUT_SECS
#define CHIP_DEVICE_CONFIG_EXTENDED_DISCOVERY_TIMEOUT_SECS (15 * 60)
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_TYPE
*
* Enable or disable including device type in commissionable node discovery.
*
* For Video Players, this value will often be 1
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_TYPE
#define CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_TYPE 0
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_TYPE
*
* Type of device using the CHIP Device Type Identifier.
*
* Examples:
* 0xFFFF = 65535 = Invalid Device Type
* 0x0051 = 81 = Smart Plug
* 0x0022 = 34 = Speaker
* 0x0023 = 35 = Video Player
*
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_TYPE
#define CHIP_DEVICE_CONFIG_DEVICE_TYPE 65535 // 65535 = Invalid Device Type
#endif
/**
* CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_NAME
*
* Enable or disable including device name in commissionable node discovery.
*
* For Video Players, this value will often be 1
*/
#ifndef CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_NAME
#define CHIP_DEVICE_CONFIG_ENABLE_COMMISSIONABLE_DEVICE_NAME 0
#endif
/**
* CHIP_DEVICE_CONFIG_DEVICE_NAME
*
* Name of device.
*/
#ifndef CHIP_DEVICE_CONFIG_DEVICE_NAME
#define CHIP_DEVICE_CONFIG_DEVICE_NAME "Test Kitchen"
#endif
/**
* CHIP_DEVICE_CONFIG_PAIRING_INITIAL_HINT
*
* Pairing Hint, bitmap value of methods to put device into pairing mode
* when it has not yet been commissioned.
*
* Bits:
* 0 - Power Cycle
* 5 - See Device Manual
*/
#ifndef CHIP_DEVICE_CONFIG_PAIRING_INITIAL_HINT
#define CHIP_DEVICE_CONFIG_PAIRING_INITIAL_HINT \
(1 << CHIP_COMMISSIONING_HINT_INDEX_POWER_CYCLE | 1 << CHIP_COMMISSIONING_HINT_INDEX_SEE_MANUAL)
#endif
/**
* CHIP_DEVICE_CONFIG_PAIRING_INITIAL_INSTRUCTION
*
* Pairing Instruction, when device has not yet been commissioned
*
* Meaning is depedent upon pairing hint value.
*/
#ifndef CHIP_DEVICE_CONFIG_PAIRING_INITIAL_INSTRUCTION
#define CHIP_DEVICE_CONFIG_PAIRING_INITIAL_INSTRUCTION ""
#endif
/**
* CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_HINT
*
* Pairing Hint, bitmap value of methods to put device into pairing mode
* when it has already been commissioned.
*
* Bits:
* 2 - Visit Administrator UX (always true for secondary)
* 5 - See Device Manual
*/
#ifndef CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_HINT
#define CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_HINT \
(1 << CHIP_COMMISSIONING_HINT_INDEX_SEE_ADMINISTRATOR_UX | 1 << CHIP_COMMISSIONING_HINT_INDEX_SEE_MANUAL)
#endif
/**
* CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_INSTRUCTION
*
* Pairing Instruction, when device has not yet been commissioned
*
* Meaning is depedent upon pairing hint value.
*/
#ifndef CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_INSTRUCTION
#define CHIP_DEVICE_CONFIG_PAIRING_SECONDARY_INSTRUCTION ""
#endif
// -------------------- App Platform Configuration --------------------
/**
* CHIP_DEVICE_CONFIG_APP_PLATFORM_ENABLED
*
* Does this device support an app platform 1=Yes, 0=No
*/
#ifndef CHIP_DEVICE_CONFIG_APP_PLATFORM_ENABLED
#define CHIP_DEVICE_CONFIG_APP_PLATFORM_ENABLED 0
#endif
/**
* CHIP_DEVICE_CONFIG_DYNAMIC_ENDPOINT_COUNT
*
* When app platform is enabled, max number of endpoints
*/
#ifndef CHIP_DEVICE_CONFIG_DYNAMIC_ENDPOINT_COUNT
#define CHIP_DEVICE_CONFIG_DYNAMIC_ENDPOINT_COUNT 0
#endif
/**
* CHIP_DISPATCH_EVENT_LONG_DISPATCH_TIME_WARNING_THRESHOLD_MS
*
* Time threshold for events dispatching
* Set 0 to disable event dispatching time measurement
*/
#ifndef CHIP_DISPATCH_EVENT_LONG_DISPATCH_TIME_WARNING_THRESHOLD_MS
#define CHIP_DISPATCH_EVENT_LONG_DISPATCH_TIME_WARNING_THRESHOLD_MS 100
#endif