| # Copyright (c) 2023 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 189.3.3.[TC-DISHM-3.3] On Mode and Startup Mode functionality with DUT as |
| Server |
| |
| PICS: |
| - DISHM.S.A0002 |
| - DISHM.S.A0003 |
| - MOD.S.F00 |
| - OO.S.A4003 |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Note" |
| verification: | |
| To Execute the TC-DISH-3.3 test case using reboot in raspi device we followed the below suggested way: |
| |
| To run a reboot test case on raspi, run the app with --KVS flag with a file in local directory and pass that file to the command to launch the app. Steps |
| |
| step-1: create a file using touch command , something like touch mytest.txt |
| step-2: chmod 777 mytest.txt |
| step-3: launch the app ./chip-all-clusters-app --KVS ./mytest.txt |
| |
| if you launch the app with the above commands and provision the app, even when you reboot the app with 'sudo reboot' , next time you launch the app with 'sudo ./out/all-clusters-app/chip-all-clusters-app --KVS ./mytest.txt' , you can run read/write attribs and commands without reprovisioning the device. |
| disabled: true |
| |
| - label: |
| "Step 1: Commission DUT to TH (can be skipped if done in a preceding |
| test)." |
| verification: | |
| |
| disabled: true |
| |
| - label: "Step 2: TH reads from the DUT the StartUpMode attribute." |
| PICS: DISHM.S.A0002 |
| verification: | |
| ./chip-tool dishwashermode read start-up-mode 1 1 |
| |
| On TH(chip-tool), Verify that StartUpMode attribute value is an integer or Null |
| - Save the value as startup_mode_dut, below is the sample log provided for the raspi platform, Here StartUpMode attribute value is null |
| |
| NOTE: if startup_mode_dut is null proceed to step 3. Else save startup_mode_dut as new_start_up_mode_th and proceed to step 5. |
| |
| [1651099663211] [82177:7560652] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0004 DataVersion: 2609052118 |
| [1651099663212] [82177:7560652] CHIP: [TOO] StartUpMode: null |
| disabled: true |
| |
| - label: "Step 3: TH reads from the DUT the SupportedModes attribute." |
| PICS: DISHM.S.A0000 |
| verification: | |
| ./chip-tool dishwashermode read supported-modes 1 1 |
| |
| On TH(chip-tool) log, Verify DUT response contains a list of ModeOptionsStruct entries |
| - Verify that the list has two or more entries |
| - Save the Mode field values as supported_modes_dut |
| - Select a value from supported_modes_dut and save the value as new_start_up_mode_th, below is the sample log provided for the raspi platform: |
| |
| [1690189296.612007][16077:16079] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1012425327 |
| [1690189296.612104][16077:16079] CHIP:TOO: SupportedModes: 3 entries |
| [1690189296.612139][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612149][16077:16079] CHIP:TOO: Label: Normal |
| [1690189296.612168][16077:16079] CHIP:TOO: Mode: 0 |
| [1690189296.612189][16077:16079] CHIP:TOO: ModeTags: 1 entries |
| [1690189296.612214][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612224][16077:16079] CHIP:TOO: Value: 16384 |
| [1690189296.612234][16077:16079] CHIP:TOO: } |
| [1690189296.612243][16077:16079] CHIP:TOO: } |
| [1690189296.612264][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612273][16077:16079] CHIP:TOO: Label: Heavy |
| [1690189296.612282][16077:16079] CHIP:TOO: Mode: 1 |
| [1690189296.612296][16077:16079] CHIP:TOO: ModeTags: 2 entries |
| [1690189296.612309][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612318][16077:16079] CHIP:TOO: Value: 7 |
| [1690189296.612327][16077:16079] CHIP:TOO: } |
| [1690189296.612339][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612348][16077:16079] CHIP:TOO: Value: 16385 |
| [1690189296.612356][16077:16079] CHIP:TOO: } |
| [1690189296.612365][16077:16079] CHIP:TOO: } |
| [1690189296.612384][16077:16079] CHIP:TOO: [3]: { |
| [1690189296.612392][16077:16079] CHIP:TOO: Label: Light |
| [1690189296.612398][16077:16079] CHIP:TOO: Mode: 2 |
| [1690189296.612413][16077:16079] CHIP:TOO: ModeTags: 3 entries |
| [1690189296.612425][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612433][16077:16079] CHIP:TOO: Value: 16386 |
| [1690189296.612443][16077:16079] CHIP:TOO: } |
| [1690189296.612456][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612465][16077:16079] CHIP:TOO: Value: 8 |
| [1690189296.612473][16077:16079] CHIP:TOO: } |
| [1690189296.612485][16077:16079] CHIP:TOO: [3]: { |
| [1690189296.612494][16077:16079] CHIP:TOO: Value: 2 |
| [1690189296.612502][16077:16079] CHIP:TOO: } |
| [1690189296.612511][16077:16079] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 4: TH writes to the DUT the StartUpMode attribute with the |
| new_start_up_mode_th value" |
| PICS: DISHM.S.A0002 |
| verification: | |
| ./chip-tool dishwashermode write start-up-mode 0 1 1 |
| |
| On TH(chip-tool) log, Verify that DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1690188912.259766][16011:16013] CHIP:DMG: StatusIB = |
| [1690188912.259778][16011:16013] CHIP:DMG: { |
| [1690188912.259790][16011:16013] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1690188912.259800][16011:16013] CHIP:DMG: }, |
| [1690188912.259813][16011:16013] CHIP:DMG: |
| |
| ./chip-tool dishwashermode read start-up-mode 1 1 |
| |
| On TH(chip-tool), Verify that StartUpMode attribute value is 0 and below is the sample log provided for the raspi platform . |
| |
| [1692171314.157274][3112:3114] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0002 DataVersion: 2502960195 |
| [1692171314.157331][3112:3114] CHIP:TOO: StartUpMode: 0 |
| disabled: true |
| |
| - label: "Step 5: TH reads from the DUT the OnMode attribute." |
| PICS: DISHM.S.A0003 && DISHM.S.A0002 |
| verification: | |
| As default value of OnMode attribute is NULL. Set the OnMode to any mode value listed in the SupportedModes entries. |
| |
| ./chip-tool dishwashermode write on-mode 0 1 1 |
| |
| On TH(chip-tool) log, Verify that DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1690189187.414225][16062:16064] CHIP:DMG: StatusIB = |
| [1690189187.414237][16062:16064] CHIP:DMG: { |
| [1690189187.414249][16062:16064] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1690189187.414260][16062:16064] CHIP:DMG: }, |
| |
| |
| ./chip-tool dishwashermode read on-mode 1 1 |
| |
| On TH(chip-tool), Verify that OnMode attribute value is an integer value |
| - Save the value as old_on_mode_dut, below is the sample log provided for the raspi platform, here OnMode attribute value is 0 |
| |
| NOTE: If startup_mode_dut is equal to old_on_mode_dut proceed to step 6. Else proceed to step 8. |
| |
| [1690189501.554415][16104:16106] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0003 DataVersion: 1012425329 |
| [1690189501.554429][16104:16106] CHIP:TOO: OnMode: 0 |
| disabled: true |
| |
| - label: "Step 6: TH reads from the DUT the SupportedModes attribute." |
| PICS: DISHM.S.A0000 && DISHM.S.A0002 |
| verification: | |
| ./chip-tool dishwashermode read supported-modes 1 1 |
| |
| On TH(chip-tool) log, Verify DUT response contains a list of ModeOptionsStruct entries |
| - Verify that the list has two or more entries |
| - Save the Mode field values as supported_modes_dut |
| - Select a value from supported_modes_dut different from startup_mode_dut. Save the value as new_mode_th, below is the sample log provided for the raspi platform: |
| |
| [1690189296.612007][16077:16079] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0000 DataVersion: 1012425327 |
| [1690189296.612104][16077:16079] CHIP:TOO: SupportedModes: 3 entries |
| [1690189296.612139][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612149][16077:16079] CHIP:TOO: Label: Normal |
| [1690189296.612168][16077:16079] CHIP:TOO: Mode: 0 |
| [1690189296.612189][16077:16079] CHIP:TOO: ModeTags: 1 entries |
| [1690189296.612214][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612224][16077:16079] CHIP:TOO: Value: 16384 |
| [1690189296.612234][16077:16079] CHIP:TOO: } |
| [1690189296.612243][16077:16079] CHIP:TOO: } |
| [1690189296.612264][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612273][16077:16079] CHIP:TOO: Label: Heavy |
| [1690189296.612282][16077:16079] CHIP:TOO: Mode: 1 |
| [1690189296.612296][16077:16079] CHIP:TOO: ModeTags: 2 entries |
| [1690189296.612309][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612318][16077:16079] CHIP:TOO: Value: 7 |
| [1690189296.612327][16077:16079] CHIP:TOO: } |
| [1690189296.612339][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612348][16077:16079] CHIP:TOO: Value: 16385 |
| [1690189296.612356][16077:16079] CHIP:TOO: } |
| [1690189296.612365][16077:16079] CHIP:TOO: } |
| [1690189296.612384][16077:16079] CHIP:TOO: [3]: { |
| [1690189296.612392][16077:16079] CHIP:TOO: Label: Light |
| [1690189296.612398][16077:16079] CHIP:TOO: Mode: 2 |
| [1690189296.612413][16077:16079] CHIP:TOO: ModeTags: 3 entries |
| [1690189296.612425][16077:16079] CHIP:TOO: [1]: { |
| [1690189296.612433][16077:16079] CHIP:TOO: Value: 16386 |
| [1690189296.612443][16077:16079] CHIP:TOO: } |
| [1690189296.612456][16077:16079] CHIP:TOO: [2]: { |
| [1690189296.612465][16077:16079] CHIP:TOO: Value: 8 |
| [1690189296.612473][16077:16079] CHIP:TOO: } |
| [1690189296.612485][16077:16079] CHIP:TOO: [3]: { |
| [1690189296.612494][16077:16079] CHIP:TOO: Value: 2 |
| [1690189296.612502][16077:16079] CHIP:TOO: } |
| [1690189296.612511][16077:16079] CHIP:TOO: } |
| disabled: true |
| |
| - label: |
| "Step 7: TH writes to the DUT the OnMode attribute with the |
| new_mode_th value" |
| PICS: DISHM.S.A0003 |
| verification: | |
| ./chip-tool dishwashermode write on-mode 2 1 1 |
| |
| On TH(chip-tool) log, Verify DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1690189470.746137][16086:16088] CHIP:DMG: { |
| [1690189470.746140][16086:16088] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1690189470.746142][16086:16088] CHIP:DMG: }, |
| disabled: true |
| |
| - label: "Step 8: TH reads from the DUT the OnMode attribute." |
| PICS: DISHM.S.A0003 && MOD.S.F00 |
| verification: | |
| ./chip-tool dishwashermode read on-mode 1 1 |
| |
| On TH(chip-tool), Verify that OnMode attribute value is an integer |
| - Save the value as new_on_mode_dut and is equal to new_mode_th and below is the sample log provided for the raspi platform, here OnMode attribute value is 2 |
| |
| [1690189501.554415][16104:16106] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0003 DataVersion: 1012425329 |
| [1690189501.554429][16104:16106] CHIP:TOO: OnMode: 2 |
| disabled: true |
| |
| - label: |
| "Step 9: TH writes to the DUT the StartUpOnOff attribute with the |
| value 1." |
| PICS: OO.S.A4003 |
| verification: | |
| ./chip-tool onoff write start-up-on-off 1 1 1 |
| |
| On TH(chip-tool) log, Verify DUT responds with a successful (value 0x00) status response and below is the sample log provided for the raspi platform: |
| |
| [1651101661960] [90832:7598169] CHIP: [DMG] { |
| [1651101661960] [90832:7598169] CHIP: [DMG] status = 0x00 (SUCCESS), |
| [1651101661960] [90832:7598169] CHIP: [DMG] }, |
| disabled: true |
| |
| - label: "Step 10: Physically power cycle the device" |
| verification: | |
| Physically power cycle the device. |
| disabled: true |
| |
| - label: "Step 11: TH reads from the DUT the StartUpMode attribute." |
| PICS: DISHM.S.A0002 |
| verification: | |
| ./chip-tool dishwashermode read start-up-mode 1 1 |
| |
| On TH(chip-tool), Verify that StartUpMode attribute value is an integer and is equal to new_start_up_mode_th, below is the sample log provided for the raspi platform, Here StartUpMode attribute value is 0 |
| |
| [1651099663211] [82177:7560652] CHIP: [TOO] Endpoint: 1 Cluster: 0x0000_0050 Attribute 0x0000_0004 DataVersion: 2609052118 |
| [1651099663212] [82177:7560652] CHIP: [TOO] StartUpMode: 0 |
| disabled: true |
| |
| - label: "Step 12: TH reads from the DUT the CurrentMode attribute." |
| PICS: DISHM.S.A0001 |
| verification: | |
| ./chip-tool dishwashermode read current-mode 1 1 |
| |
| On TH(chip-tool), Verify that CurrentMode attribute value is an integer value and is equal to new_on_mode_dut, below is the sample log provided for the raspi platform, Here CurrentMode attribute value is 2 |
| |
| [1690189536.790233][16118:16120] CHIP:TOO: Endpoint: 1 Cluster: 0x0000_0059 Attribute 0x0000_0001 DataVersion: 4080703118 |
| [1690189536.790280][16118:16120] CHIP:TOO: CurrentMode: 2 |
| disabled: true |