| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 80.5.2. [TC-MOD-3.2] StartUpMode Verification (DUT as Server) |
| |
| PICS: |
| - MOD.S.A0004 |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Mode Select" |
| endpoint: 1 |
| #Configure newmode value |
| NewMode: |
| type: int8u |
| defaultValue: 7 |
| |
| tests: |
| - label: |
| "Step 0: Commission DUT to TH (can be skipped if done in a preceding |
| test)." |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Step 1: TH reads the StartUpMode attribute from the DUT" |
| PICS: MOD.S.A0004 |
| command: "readAttribute" |
| attribute: "StartUpMode" |
| response: |
| saveAs: startup_mode_dut |
| |
| - label: "Step 2a: TH reads the CurrentMode attribute from the DUT" |
| PICS: MOD.S.A0003 |
| command: "readAttribute" |
| attribute: "CurrentMode" |
| response: |
| saveAs: old_current_mode_dut |
| |
| - label: |
| "Step 2b: If the StartUpMode and CurrentMode attributes have the same |
| value, proceed to step 2c, Otherwise proceed to step 3a." |
| PICS: MOD.S.A0003 && MOD.S.A0004 |
| cluster: "EqualityCommands" |
| command: "UnsignedNumberEquals" |
| arguments: |
| values: |
| - name: "Value1" |
| value: startup_mode_dut |
| - name: "Value2" |
| value: old_current_mode_dut |
| response: |
| - values: |
| - name: "Equals" |
| saveAs: IsExpectedValue |
| |
| - label: "Step 2c: TH reads the SupportedModes attribute from the DUT" |
| runIf: IsExpectedValue |
| PICS: MOD.S.A0002 |
| command: "readAttribute" |
| attribute: "SupportedModes" |
| response: |
| constraints: |
| type: list |
| |
| - label: |
| "Step 2d: Select a value from the list in step 2c with a different |
| value than the StartUpMode value read in step 1. TH sends a |
| ChangeToMode command to the DUT with the selected value." |
| runIf: IsExpectedValue |
| PICS: MOD.S.A0002 && MOD.S.C00.Rsp |
| command: "ChangeToMode" |
| arguments: |
| values: |
| - name: "NewMode" |
| value: NewMode |
| |
| - label: "Step 3a: Physically power cycle the device." |
| verification: | |
| Physically power cycle the device. |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "Step 3b: TH reads the CurrentMode attribute from the DUT" |
| PICS: MOD.S.A0003 && MOD.S.F00 && PICS_USER_PROMPT |
| command: "readAttribute" |
| attribute: "CurrentMode" |
| response: |
| value: startup_mode_dut |