| /* |
| * |
| * Copyright (c) 2022 Project CHIP Authors |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "controller/InvokeInteraction.h" |
| #include "controller/ReadInteraction.h" |
| #include <app/clusters/dishwasher-alarm-server/dishwasher-alarm-server.h> |
| #include <protocols/interaction_model/StatusCode.h> |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| #include "lib/shell/Engine.h" |
| #include "lib/shell/commands/Help.h" |
| #endif // ENABLE_CHIP_SHELL |
| |
| using namespace chip; |
| using namespace chip::app; |
| using namespace chip::app::Clusters; |
| using namespace chip::app::Clusters::DishwasherAlarm; |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| using Shell::Engine; |
| using Shell::shell_command_t; |
| using Shell::streamer_get; |
| using Shell::streamer_printf; |
| |
| Engine sShellManualDishWasherAlarmStateSubCommands; |
| #endif // defined(ENABLE_CHIP_SHELL) |
| |
| #if CONFIG_ENABLE_CHIP_SHELL |
| |
| CHIP_ERROR ManualDishWasherAlarmCommandHelpHandler(int argc, char ** argv) |
| { |
| sShellManualDishWasherAlarmStateSubCommands.ForEachCommand(Shell::PrintCommandHelp, nullptr); |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR ManualDishWasherAlarmCommandHandler(int argc, char ** argv) |
| { |
| if (argc == 0) |
| { |
| return ManualDishWasherAlarmCommandHelpHandler(argc, argv); |
| } |
| |
| return sShellManualDishWasherAlarmStateSubCommands.ExecCommand(argc, argv); |
| } |
| |
| CHIP_ERROR ManualDishWasherAlarmSetRaiseCommandHandler(int argc, char ** argv) |
| { |
| if (argc != 0) |
| { |
| return ManualDishWasherAlarmCommandHelpHandler(argc, argv); |
| } |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| Protocols::InteractionModel::Status status; |
| DishwasherAlarmServer & serverInstance = DishwasherAlarmServer::Instance(); |
| |
| BitMask<AlarmMap> supported; // Set dishwasher alarm supported value |
| supported.SetField(AlarmMap::kInflowError, 1); // 0x01, 1 |
| supported.SetField(AlarmMap::kDrainError, 1); // 0x02, 2 |
| supported.SetField(AlarmMap::kDoorError, 1); // 0x04, 4 |
| supported.SetField(AlarmMap::kTempTooLow, 1); // 0x08, 8 |
| supported.SetField(AlarmMap::kWaterLevelError, 1); // 0x20, 32 |
| |
| BitMask<AlarmMap> mask; // Set dishwasher alarm mask value |
| mask.SetField(AlarmMap::kInflowError, 1); // 0x01, 1 |
| mask.SetField(AlarmMap::kDrainError, 1); // 0x02, 2 |
| mask.SetField(AlarmMap::kDoorError, 1); // 0x04, 4 |
| mask.SetField(AlarmMap::kTempTooLow, 1); // 0x08, 8 |
| mask.SetField(AlarmMap::kWaterLevelError, 1); // 0x20, 32 |
| |
| BitMask<AlarmMap> state; // Set dishwasher alarm state value |
| state.SetField(AlarmMap::kDrainError, 1); // 0x02, 2 |
| state.SetField(AlarmMap::kDoorError, 1); // 0x04, 4 |
| state.SetField(AlarmMap::kTempTooLow, 1); // 0x08, 8 |
| |
| status = serverInstance.SetSupportedValue(1, supported); // 0x2F, 47 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| |
| status = serverInstance.SetMaskValue(1, mask); // 0x2F, 47 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| |
| status = serverInstance.SetStateValue(1, state); // 0x0E, 14 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "ManualDishWasherAlarmSetRaiseCommandHandler Failed!\r\n"); |
| } |
| |
| return err; |
| } |
| |
| CHIP_ERROR ManualDishWasherAlarmSetLowerCommandHandler(int argc, char ** argv) |
| { |
| if (argc != 0) |
| { |
| return ManualDishWasherAlarmCommandHelpHandler(argc, argv); |
| } |
| |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| Protocols::InteractionModel::Status status; |
| DishwasherAlarmServer & serverInstance = DishwasherAlarmServer::Instance(); |
| |
| BitMask<AlarmMap> supported; // Set dishwasher alarm supported value |
| supported.SetField(AlarmMap::kInflowError, 1); // 0x01, 1 |
| supported.SetField(AlarmMap::kDrainError, 1); // 0x02, 2 |
| supported.SetField(AlarmMap::kDoorError, 1); // 0x04, 4 |
| supported.SetField(AlarmMap::kTempTooLow, 1); // 0x08, 8 |
| supported.SetField(AlarmMap::kWaterLevelError, 1); // 0x20, 32 |
| |
| BitMask<AlarmMap> mask; // Set dishwasher alarm mask value |
| mask.SetField(AlarmMap::kInflowError, 1); // 0x01, 1 |
| mask.SetField(AlarmMap::kDrainError, 1); // 0x02, 2 |
| mask.SetField(AlarmMap::kDoorError, 1); // 0x04, 4 |
| mask.SetField(AlarmMap::kTempTooLow, 1); // 0x08, 8 |
| mask.SetField(AlarmMap::kWaterLevelError, 1); // 0x20, 32 |
| |
| status = serverInstance.SetSupportedValue(1, supported); // 0x2F, 47 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| |
| status = serverInstance.SetMaskValue(1, mask); // 0x2F, 47 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| |
| status = serverInstance.SetStateValue(1, 0); // Set dishwasher alarm state value 0x00, 0 |
| if (status != Protocols::InteractionModel::Status::Success) |
| { |
| err = CHIP_ERROR_INTERNAL; |
| goto exit; |
| } |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "ManualDishWasherAlarmSetLowerCommandHandler Failed!\r\n"); |
| } |
| |
| return err; |
| } |
| #endif // CONFIG_ENABLE_CHIP_SHELL |