| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * Copyright (c) 2016-2018 Nest Labs, Inc. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file contains default compile-time configuration |
| * constants for the CHIP System Layer, a common |
| * abstraction layer for the system networking components |
| * underlying the various CHIP target network layers. |
| * |
| * Package integrators that wish to override these values should |
| * either use preprocessor definitions or create a project- |
| * specific SystemProjectConfig.h header and then assert |
| * HAVE_SYSTEMPROJECTCONFIG_H via the package configuration tool |
| * via --with-chip-system-project-includes=DIR where DIR is |
| * the directory that contains the header. |
| * |
| * NOTE WELL: On some platforms, this header is included by |
| * C-language programs. |
| */ |
| |
| #pragma once |
| |
| /* Platform include headers */ |
| #if CHIP_HAVE_CONFIG_H |
| #include <system/SystemBuildConfig.h> |
| #endif |
| |
| /* Include a CHIP project-specific configuration file, if defined. |
| * |
| * An application or module that incorporates CHIP can define a project |
| * configuration file to override standard CHIP configuration with |
| * application-specific values. The CHIPProjectConfig.h file is typically |
| * located outside the CHIP source tree, alongside the source code for the |
| * application. The config file is included here to enable certain system-wide |
| * configuration options, primarily related to logging and error reporting. |
| */ |
| #ifdef CHIP_PROJECT_CONFIG_INCLUDE |
| #include CHIP_PROJECT_CONFIG_INCLUDE |
| #endif |
| |
| /* Include a CHIP platform-specific configuration file, if defined. |
| * |
| * A platform configuration file contains overrides to standard CHIP |
| * configuration that are specific to the platform or OS on which CHIP is |
| * running. It is typically provided as apart of an adaptation layer that |
| * adapts CHIP to the target environment. This adaptation layer may be |
| * included in the CHIP source tree itself or implemented externally. The |
| * config file is included here to enable certain system-wide configuration |
| * options, primarily related to logging and error reporting. |
| */ |
| #ifdef CHIP_PLATFORM_CONFIG_INCLUDE |
| #include CHIP_PLATFORM_CONFIG_INCLUDE |
| #endif |
| |
| /* Include a SystemLayer project-specific configuration file, if defined. |
| * |
| * An application or module that incorporates CHIP can define a project configuration |
| * file to override standard System Layer configuration with application-specific values. |
| * The project config file is typically located outside the CHIP source tree, |
| * alongside the source code for the application. |
| */ |
| #ifdef SYSTEM_PROJECT_CONFIG_INCLUDE |
| #include SYSTEM_PROJECT_CONFIG_INCLUDE |
| #endif // SYSTEM_PROJECT_CONFIG_INCLUDE |
| |
| /* Include a SystemLayer platform-specific configuration file, if defined. |
| * |
| * A platform configuration file contains overrides to standard System Layer configuration |
| * that are specific to the platform or OS on which CHIP is running. It is typically |
| * provided as apart of an adaptation layer that adapts CHIP to the target |
| * environment. This adaptation layer may be included in the CHIP source tree |
| * itself or implemented externally. |
| */ |
| #ifdef SYSTEM_PLATFORM_CONFIG_INCLUDE |
| #include SYSTEM_PLATFORM_CONFIG_INCLUDE |
| #endif |
| |
| /*--- Sanity check on the build configuration logic. ---*/ |
| |
| #if !(CHIP_SYSTEM_CONFIG_USE_LWIP || CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK) |
| #error "REQUIRED: CHIP_SYSTEM_CONFIG_USE_LWIP || CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK" |
| #endif // !(CHIP_SYSTEM_CONFIG_USE_LWIP || CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_USE_NETWORK_FRAMEWORK) |
| |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| #error "FORBIDDEN: CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_SOCKETS" |
| #endif // CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #error "FORBIDDEN: CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK" |
| #endif // CHIP_SYSTEM_CONFIG_USE_LWIP && CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| |
| #if CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK && CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| #error "FORBIDDEN: CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK && CHIP_SYSTEM_CONFIG_USE_SOCKETS" |
| #endif // CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK && CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| |
| // clang-format off |
| |
| #ifndef CHIP_SYSTEM_CONFIG_USE_IO_THREAD |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #define CHIP_SYSTEM_CONFIG_USE_IO_THREAD 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_IO_THREAD 0 |
| #endif // CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #endif // CHIP_SYSTEM_CONFIG_USE_IO_THREAD |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION |
| * |
| * @brief |
| * Define as 1 to transfer the project configuration variable definitions from InetProjectConfig.h into the corresponding |
| * variables for the CHIP System Layer. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION |
| #define CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION 0 |
| #endif // CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION |
| |
| #if CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION |
| #ifdef INET_PROJECT_CONFIG_INCLUDE |
| #include INET_PROJECT_CONFIG_INCLUDE |
| #endif // INET_PROJECT_CONFIG_INCLUDE |
| |
| #if !defined(CHIP_SYSTEM_CONFIG_POSIX_LOCKING) && defined(INET_CONFIG_POSIX_LOCKING) |
| #define CHIP_SYSTEM_CONFIG_POSIX_LOCKING INET_CONFIG_POSIX_LOCKING |
| #endif // !defined(CHIP_SYSTEM_CONFIG_POSIX_LOCKING) && defined(INET_CONFIG_POSIX_LOCKING) |
| |
| #if !defined(CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING) && defined(INET_CONFIG_FREERTOS_LOCKING) |
| #define CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING INET_CONFIG_FREERTOS_LOCKING |
| #endif // !defined(CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING) && defined(INET_CONFIG_FREERTOS_LOCKING) |
| |
| #if !defined(CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE) && defined(INET_CONFIG_NUM_BUFS) |
| #define CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE INET_CONFIG_NUM_BUFS |
| #endif // !defined(CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE) && defined(INET_CONFIG_NUM_BUFS) |
| |
| #if !defined(CHIP_SYSTEM_CONFIG_NUM_TIMERS) && defined(INET_CONFIG_NUM_TIMERS) |
| #define CHIP_SYSTEM_CONFIG_NUM_TIMERS INET_CONFIG_NUM_TIMERS |
| #endif // !defined(CHIP_SYSTEM_CONFIG_NUM_TIMERS) && defined(INET_CONFIG_NUM_TIMERS) |
| |
| #endif // CHIP_SYSTEM_CONFIG_TRANSFER_INETLAYER_PROJECT_CONFIGURATION |
| |
| /* Standard include headers */ |
| #ifndef CHIP_SYSTEM_CONFIG_ERROR_TYPE |
| #include <stdint.h> |
| #endif /* CHIP_SYSTEM_CONFIG_ERROR_TYPE */ |
| |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP |
| #include <lwip/opt.h> |
| #endif // CHIP_SYSTEM_CONFIG_USE_LWIP |
| |
| /* Configuration option variables defined below */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_NO_LOCKING |
| * |
| * @brief |
| * Disable the use of locking within the system layer. |
| * |
| * Unless you are simulating an LwIP-based system on a Unix-style host, this value should be left at its default. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_NO_LOCKING |
| #define CHIP_SYSTEM_CONFIG_NO_LOCKING 0 |
| #endif /* CHIP_SYSTEM_CONFIG_NO_LOCKING */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_POSIX_LOCKING |
| * |
| * @brief |
| * Use POSIX locking. This is enabled by default when not compiling for BSD sockets. |
| * |
| * Unless you are simulating an LwIP-based system on a Unix-style host, this value should be left at its default. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_POSIX_LOCKING |
| #define CHIP_SYSTEM_CONFIG_POSIX_LOCKING 1 |
| #endif /* CHIP_SYSTEM_CONFIG_POSIX_LOCKING */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING |
| * |
| * @brief |
| * Use FreeRTOS locking. |
| * |
| * This should be generally asserted (1) for FreeRTOS + LwIP-based systems and deasserted (0) for BSD sockets-based systems. |
| * |
| * However, if you are simulating an LwIP-based system atop POSIX threads and BSD sockets, this should also be deasserted (0). |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING |
| #define CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING 0 |
| #endif /* CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_NO_LOCKING |
| * |
| * @brief |
| * Disable the use of locking within the system layer. |
| * |
| * This value is mutually exclusive with CHIP_SYSTEM_CONFIG_POSIX_LOCKING and CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_NO_LOCKING |
| #define CHIP_SYSTEM_CONFIG_NO_LOCKING 0 |
| #endif /* CHIP_SYSTEM_CONFIG_NO_LOCKING */ |
| |
| #if !(CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING || CHIP_SYSTEM_CONFIG_NO_LOCKING) |
| #error "REQUIRED: CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING || CHIP_SYSTEM_CONFIG_NO_LOCKING" |
| #endif // !(CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING || CHIP_SYSTEM_CONFIG_NO_LOCKING) |
| |
| #if CHIP_SYSTEM_CONFIG_NO_LOCKING && (CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING) |
| #error "FORBIDDEN: CHIP_SYSTEM_CONFIG_NO_LOCKING && (CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING)" |
| #endif // CHIP_SYSTEM_CONFIG_NO_LOCKING && (CHIP_SYSTEM_CONFIG_POSIX_LOCKING || CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING) |
| |
| #if CHIP_SYSTEM_CONFIG_POSIX_LOCKING && CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING |
| #error "FORBIDDEN: CHIP_SYSTEM_CONFIG_POSIX_LOCKING && CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING" |
| #endif // CHIP_SYSTEM_CONFIG_POSIX_LOCKING && CHIP_SYSTEM_CONFIG_FREERTOS_LOCKING |
| |
| #ifndef CHIP_SYSTEM_CONFIG_ERROR_TYPE |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_ERROR_TYPE |
| * |
| * @brief |
| * This defines the data type used to represent errors for the CHIP System Layer subsystem. |
| */ |
| #define CHIP_SYSTEM_CONFIG_ERROR_TYPE int32_t |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_NO_ERROR |
| * |
| * @brief |
| * This defines the CHIP System Layer error code for no error or success. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_NO_ERROR |
| #define CHIP_SYSTEM_CONFIG_NO_ERROR 0 |
| #endif /* CHIP_SYSTEM_CONFIG_NO_ERROR */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_ERROR_MIN |
| * |
| * @brief |
| * This defines the base or minimum CHIP System Layer error number range. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_ERROR_MIN |
| #define CHIP_SYSTEM_CONFIG_ERROR_MIN 7000 |
| #endif /* CHIP_SYSTEM_CONFIG_ERROR_MIN */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_ERROR_MAX |
| * |
| * @brief |
| * This defines the top or maximum CHIP System Layer error number range. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_ERROR_MAX |
| #define CHIP_SYSTEM_CONFIG_ERROR_MAX 7999 |
| #endif /* CHIP_SYSTEM_CONFIG_ERROR_MAX */ |
| |
| /** |
| * @def _CHIP_SYSTEM_CONFIG_ERROR |
| * |
| * @brief |
| * This defines a mapping function for CHIP System Layer errors that allows mapping such errors into a platform- or |
| * system-specific range. |
| */ |
| #ifndef _CHIP_SYSTEM_CONFIG_ERROR |
| #define _CHIP_SYSTEM_CONFIG_ERROR(e) (CHIP_SYSTEM_CONFIG_ERROR_MIN + (e)) |
| #endif /* _CHIP_SYSTEM_CONFIG_ERROR */ |
| |
| #endif /* CHIP_SYSTEM_CONFIG_ERROR_TYPE */ |
| |
| /** |
| * @def CHIP_SYSTEM_HEADER_RESERVE_SIZE |
| * |
| * @brief |
| * The number of bytes to reserve in a network packet buffer to contain |
| * the CHIP message and exchange headers. |
| * |
| * This number was calculated as follows: |
| * |
| * CHIP Crypto Header: |
| * |
| * 4 -- Length of encrypted block |
| * 4 -- Reserve |
| * 8 -- Initialization Vector |
| * 8 -- Encryption Tag |
| */ |
| #ifndef CHIP_SYSTEM_CRYPTO_HEADER_RESERVE_SIZE |
| #define CHIP_SYSTEM_CRYPTO_HEADER_RESERVE_SIZE 24 |
| #endif |
| |
| /** |
| * @def CHIP_SYSTEM_HEADER_RESERVE_SIZE |
| * |
| * @brief |
| * The number of bytes to reserve in a network packet buffer to contain |
| * the CHIP message and exchange headers. |
| * |
| * This number was calculated as follows: |
| * |
| * CHIP Message Header: |
| * |
| * 2 -- Frame Length |
| * 2 -- Message Header |
| * 4 -- Message Id |
| * 8 -- Source Node Id |
| * 8 -- Destination Node Id |
| * 2 -- Key Id |
| * |
| * CHIP Exchange Header: |
| * |
| * 1 -- Application Version |
| * 1 -- Message Type |
| * 2 -- Exchange Id |
| * 4 -- Profile Id |
| * 4 -- Acknowleged Message Id |
| * |
| * @note A number of these fields are optional or not presently used. So most headers will be considerably smaller than this. |
| */ |
| #ifndef CHIP_SYSTEM_HEADER_RESERVE_SIZE |
| #define CHIP_SYSTEM_HEADER_RESERVE_SIZE (38 + CHIP_SYSTEM_CRYPTO_HEADER_RESERVE_SIZE) |
| #endif /* CHIP_SYSTEM_HEADER_RESERVE_SIZE */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE |
| * |
| * @brief |
| * This is the total number of packet buffers for the BSD sockets configuration. |
| * |
| * This may be set to zero (0) to enable unbounded dynamic allocation using malloc. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE |
| #define CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE 15 |
| #endif /* CHIP_SYSTEM_CONFIG_PACKETBUFFER_POOL_SIZE */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX |
| * |
| * @brief |
| * The maximum size an application can use with \c PacketBuffer. This is not the raw memory size consumed by |
| * a \c PacketBuffer object. |
| * |
| * @note |
| * Only socket platforms can override the default value. On LwIP-based platforms, the size is derived from the PBUF size |
| * and overriding the value will result in a compile-time error. |
| * |
| * This value should be set large enough to accomodate the usage of PacketBuffer in the system. In particular, for the use |
| * in CHIP, the value should be set to accomodate the desired path MTU (i.e. the largest IP packet that can be sent over |
| * the network interface) plus any protocol overhead. |
| * |
| * For example, sending an IP packet over the tunnel requires additional overheads that depend on platform's network |
| * interface. On socket platforms, the tunnel protocol overhead is 47 bytes; on LwIP platforms the overhead is 101 bytes, |
| * plus any "sub-Ethernet" data structure space (e.g. the linked list pointers used by some interfaces to queue packets). |
| * |
| * The overheads are calculated as follows: |
| * |
| * (variable) -- "Sub-Ethernet" data structures (LwIP-only) |
| * 14 -- Ethernet Header (LwIP-only) |
| * 20 -- IPv4 Header (LwIP-only) |
| * 20 -- TCP Header (LwIP-only) |
| * 2 -- CHIP Message Length |
| * 24 -- CHIP Header |
| * 1 -- Tunnel Header |
| * 20 -- Crypto Trailer |
| * |
| * The size of PacketBuffer structure does not need to be included in this value. |
| */ |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP && !defined(DOXYGEN) |
| #ifdef CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX |
| #error "CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX cannot be defined on an LwIP-based platform." |
| #endif /* CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX */ |
| #else /* !CHIP_SYSTEM_CONFIG_USE_LWIP */ |
| #ifndef CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX |
| #define CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX 1583 |
| #endif /* CHIP_SYSTEM_CONFIG_PACKETBUFFER_CAPACITY_MAX */ |
| #endif /* !CHIP_SYSTEM_CONFIG_USE_LWIP */ |
| |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_LWIP_EVENT_TYPE |
| * |
| * @brief |
| * This defines the type for CHIP System Layer event types, typically an integral type. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_LWIP_EVENT_TYPE |
| #define CHIP_SYSTEM_CONFIG_LWIP_EVENT_TYPE int |
| #endif /* CHIP_SYSTEM_CONFIG_LWIP_EVENT_TYPE */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_LWIP_EVENT_UNRESERVED_CODE |
| * |
| * @brief |
| * This defines the first number in the default event code space not reserved for use by the CHIP System Layer. |
| * Event codes used by each layer must not overlap. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_LWIP_EVENT_UNRESERVED_CODE |
| #define CHIP_SYSTEM_CONFIG_LWIP_EVENT_UNRESERVED_CODE 32 |
| #endif /* CHIP_SYSTEM_CONFIG_LWIP_EVENT_UNRESERVED_CODE */ |
| |
| /** |
| * @def _CHIP_SYSTEM_CONFIG_LWIP_EVENT |
| * |
| * @brief |
| * This defines a mapping function for CHIP System Layer codes for describing the types of events for the LwIP dispatcher, |
| * which allows mapping such event types into a platform- or system-specific range. |
| */ |
| #ifndef _CHIP_SYSTEM_CONFIG_LWIP_EVENT |
| #define _CHIP_SYSTEM_CONFIG_LWIP_EVENT(e) (e) |
| #endif /* _CHIP_SYSTEM_CONFIG_LWIP_EVENT */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_LWIP_EVENT_OBJECT_TYPE |
| * |
| * @brief |
| * This defines the type of CHIP System Layer event objects or "messages" for the LwIP dispatcher. |
| * |
| * Such types are not directly used by the CHIP System Layer but are "passed through". Consequently a forward declaration and |
| * a const pointer or reference are appropriate. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_LWIP_EVENT_OBJECT_TYPE |
| namespace chip { |
| namespace System { |
| |
| struct LwIPEvent; |
| |
| } // namespace System |
| } // namespace chip |
| |
| #define CHIP_SYSTEM_CONFIG_LWIP_EVENT_OBJECT_TYPE const struct chip::System::LwIPEvent* |
| #endif /* CHIP_SYSTEM_CONFIG_LWIP_EVENT_OBJECT_TYPE */ |
| |
| #endif /* CHIP_SYSTEM_CONFIG_USE_LWIP */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_POSIX_ERROR_FUNCTIONS |
| * |
| * @brief |
| * This defines whether (1) or not (0) your platform will provide the following platform- and system-specific functions: |
| * - chip::System::MapErrorPOSIX |
| * - chip::System::DescribeErrorPOSIX |
| * - chip::System::IsErrorPOSIX |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_POSIX_ERROR_FUNCTIONS |
| #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_POSIX_ERROR_FUNCTIONS 0 |
| #endif /* CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_POSIX_ERROR_FUNCTIONS */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_LWIP_ERROR_FUNCTIONS |
| * |
| * @brief |
| * This defines whether (1) or not (0) your platform will provide the following system-specific functions: |
| * - chip::System::MapErrorLwIP |
| * - chip::System::DescribeErrorLwIP |
| * - chip::System::IsErrorLwIP |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_LWIP_ERROR_FUNCTIONS |
| #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_LWIP_ERROR_FUNCTIONS 0 |
| #endif /* CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_LWIP_ERROR_FUNCTIONS */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_XTOR_FUNCTIONS |
| * |
| * @brief |
| * This defines whether (1) or not (0) your platform will provide the following platform-specific functions: |
| * - chip::System::Platform::Layer::WillInit |
| * - chip::System::Platform::Layer::WillShutdown |
| * - chip::System::Platform::Layer::DidInit |
| * - chip::System::Platform::Layer::DidShutdown |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_XTOR_FUNCTIONS |
| #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_XTOR_FUNCTIONS 0 |
| #endif /* CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_XTOR_FUNCTIONS */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_EVENT_FUNCTIONS |
| * |
| * @brief |
| * This defines whether (1) or not (0) your platform will provide the following platform-specific functions: |
| * - chip::System::Platform::Layer::PostEvent |
| * - chip::System::Platform::Layer::DispatchEvents |
| * - chip::System::Platform::Layer::DispatchEvent |
| * - chip::System::Platform::Layer::StartTimer |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_EVENT_FUNCTIONS |
| #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_EVENT_FUNCTIONS 0 |
| #endif /* CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_EVENT_FUNCTIONS */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_NUM_TIMERS |
| * |
| * @brief |
| * This is the total number of available timers. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_NUM_TIMERS |
| #define CHIP_SYSTEM_CONFIG_NUM_TIMERS 32 |
| #endif /* CHIP_SYSTEM_CONFIG_NUM_TIMERS */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PROVIDE_STATISTICS |
| * |
| * @brief |
| * This defines whether (1) or not (0) the CHIP System Layer provides logic for gathering and reporting statistical |
| * information for diagnostic purposes. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PROVIDE_STATISTICS |
| #define CHIP_SYSTEM_CONFIG_PROVIDE_STATISTICS 0 |
| #endif // CHIP_SYSTEM_CONFIG_PROVIDE_STATISTICS |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_TEST |
| * |
| * @brief |
| * Defines whether (1) or not (0) to enable testing aids. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_TEST |
| #define CHIP_SYSTEM_CONFIG_TEST 0 |
| #endif |
| |
| // clang-format on |
| |
| // Configuration parameters with header inclusion dependencies |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_HEADER_RESERVE_SIZE |
| * |
| * @brief |
| * The number of bytes to reserve in a network packet buffer to contain all the possible protocol encapsulation headers before the |
| * application message text. On POSIX sockets, this is CHIP_SYSTEM_HEADER_RESERVE_SIZE. On LwIP, additional space is required for |
| * the all the headers from layer-2 up to the TCP or UDP header. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_HEADER_RESERVE_SIZE |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP |
| #define CHIP_SYSTEM_CONFIG_HEADER_RESERVE_SIZE \ |
| (PBUF_LINK_HLEN + PBUF_IP_HLEN + PBUF_TRANSPORT_HLEN + CHIP_SYSTEM_HEADER_RESERVE_SIZE) |
| #else /* !CHIP_SYSTEM_CONFIG_USE_LWIP */ |
| #define CHIP_SYSTEM_CONFIG_HEADER_RESERVE_SIZE (CHIP_SYSTEM_HEADER_RESERVE_SIZE) |
| #endif /* !CHIP_SYSTEM_CONFIG_USE_LWIP */ |
| #endif /* CHIP_SYSTEM_CONFIG_HEADER_RESERVE_SIZE */ |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME |
| * |
| * @brief |
| * Use platform-supplied functions for System Layer clock functions. |
| * |
| * Determines whether (1) or not (0) the underlying platform provides implementations for |
| * the System Layer GetClock/SetClock functions. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME |
| #define CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME 0 |
| #endif // CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS |
| * |
| * @brief |
| * Use the POSIX time functions for System Layer clock functions. |
| * |
| * Use the POSIX time functions (clock_gettime, gettimeofday, etc.) to implement the |
| * System Layer GetClock/SetClock functions. |
| * |
| * Defaults to enabled if the system is using sockets. |
| * |
| * This configuration is overridden if CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME is set. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #define CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS 1 |
| #else // CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #define CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS 0 |
| #endif // CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK |
| #endif // CHIP_SYSTEM_CONFIG_USE_POSIX_TIME_FUNCTS |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_LWIP_MONOTONIC_TIME |
| * |
| * @brief |
| * Use LwIP time function for System Layer monotonic clock functions. |
| * |
| * Use the LwIP sys_now() function to implement the System Layer GetClock_Monotonic... functions. |
| * |
| * Defaults to enabled if the system is using LwIP and not sockets. |
| * |
| * This configuration is overridden if CHIP_SYSTEM_CONFIG_PLATFORM_PROVIDES_TIME is set. |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_LWIP_MONOTONIC_TIME |
| #if CHIP_SYSTEM_CONFIG_USE_LWIP && !CHIP_SYSTEM_CONFIG_USE_SOCKETS |
| #define CHIP_SYSTEM_CONFIG_USE_LWIP_MONOTONIC_TIME 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_LWIP_MONOTONIC_TIME 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_LWIP_MONOTONIC_TIME |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD |
| * |
| * @brief |
| * The earliest time at which the real time clock is considered to be valid. |
| * |
| * The value is given in Unix time scaled to seconds. |
| * |
| * The default value corresponds to 2000/01/01 00:00:00 |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD |
| #define CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD 946684800 |
| #endif // CHIP_SYSTEM_CONFIG_VALID_REAL_TIME_THRESHOLD |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_POSIX_PIPE |
| * |
| * @brief |
| * Use the POSIX pipe() function. |
| * |
| * Use the POSIX pipe() function to create an anonymous data stream. |
| * |
| * Defaults to enabled if the system is using sockets (except for Zephyr RTOS). |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_POSIX_PIPE |
| #if (CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK) && !__ZEPHYR__ |
| #define CHIP_SYSTEM_CONFIG_USE_POSIX_PIPE 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_POSIX_PIPE 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_POSIX_PIPE |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS |
| * |
| * @brief |
| * Include missing functions for Zephyr sockets |
| * |
| * Zephyr socket API lacks some of the functions required by CHIP. |
| * If this value is set CHIP will provide the missing functions. |
| * |
| * Defaults to enabled on Zephyr platforms using sockets |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS && __ZEPHYR__ |
| #define CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_ZEPHYR_SOCKET_EXTENSIONS |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| * |
| * @brief |
| * Use platform API to join and leave multicast groups. |
| * |
| * In case a given platform does not support adding and removing multicast |
| * addresses to a network interface using the generic network API like LWIP |
| * or sockets, this setting allows the platform layer to inject handlers |
| * which achieve the goal by other means. |
| * |
| * Defaults to enabled on Zephyr platforms using sockets |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS && __ZEPHYR__ |
| #define CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_PLATFORM_MULTICAST_API |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_ZEPHYR_NET_IF |
| * |
| * @brief |
| * Use Zephyr net_if API to enumerate available network interfaces |
| * |
| * Defaults to enabled on Zephyr platforms using sockets |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_ZEPHYR_NET_IF |
| #if CHIP_SYSTEM_CONFIG_USE_SOCKETS && __ZEPHYR__ |
| #define CHIP_SYSTEM_CONFIG_USE_ZEPHYR_NET_IF 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_ZEPHYR_NET_IF 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_ZEPHYR_NET_IF |
| |
| /** |
| * @def CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS |
| * |
| * @brief |
| * Use BSD ifaddrs.h API to enumerate available network interfaces |
| * |
| * Defaults to enabled on Unix/Linux platforms using sockets |
| */ |
| #ifndef CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS |
| #if (CHIP_SYSTEM_CONFIG_USE_SOCKETS || CHIP_SYSTEM_CONFIG_USE_NETWORK_FRAMEWORK) && !__ZEPHYR__ |
| #define CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS 1 |
| #else |
| #define CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS 0 |
| #endif |
| #endif // CHIP_SYSTEM_CONFIG_USE_BSD_IFADDRS |