| /* |
| * |
| * Copyright (c) 2020-2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Provides an implementation of the BLEManager singleton object |
| * for Zephyr platforms. |
| */ |
| |
| #include <platform/internal/CHIPDeviceLayerInternal.h> |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| |
| #include <platform/Zephyr/BLEManagerImpl.h> |
| |
| #include <ble/CHIPBleServiceData.h> |
| #include <platform/internal/BLEManager.h> |
| #include <support/CodeUtils.h> |
| #include <support/logging/CHIPLogging.h> |
| |
| #include <logging/log.h> |
| #include <sys/byteorder.h> |
| #include <sys/util.h> |
| |
| LOG_MODULE_DECLARE(chip); |
| |
| using namespace ::chip; |
| using namespace ::chip::Ble; |
| using namespace ::chip::System; |
| |
| namespace chip { |
| namespace DeviceLayer { |
| namespace Internal { |
| |
| namespace { |
| |
| const bt_uuid_128 UUID128_CHIPoBLEChar_RX = |
| BT_UUID_INIT_128(0x11, 0x9D, 0x9F, 0x42, 0x9C, 0x4F, 0x9F, 0x95, 0x59, 0x45, 0x3D, 0x26, 0xF5, 0x2E, 0xEE, 0x18); |
| const bt_uuid_128 UUID128_CHIPoBLEChar_TX = |
| BT_UUID_INIT_128(0x12, 0x9D, 0x9F, 0x42, 0x9C, 0x4F, 0x9F, 0x95, 0x59, 0x45, 0x3D, 0x26, 0xF5, 0x2E, 0xEE, 0x18); |
| bt_uuid_16 UUID16_CHIPoBLEService = BT_UUID_INIT_16(0xFEAF); |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_RX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x11 } }; |
| |
| const ChipBleUUID chipUUID_CHIPoBLEChar_TX = { { 0x18, 0xEE, 0x2E, 0xF5, 0x26, 0x3D, 0x45, 0x59, 0x95, 0x9F, 0x4F, 0x9C, 0x42, 0x9F, |
| 0x9D, 0x12 } }; |
| |
| _bt_gatt_ccc CHIPoBLEChar_TX_CCC = BT_GATT_CCC_INITIALIZER(nullptr, BLEManagerImpl::HandleTXCCCWrite, nullptr); |
| |
| // clang-format off |
| |
| BT_GATT_SERVICE_DEFINE(CHIPoBLE_Service, |
| BT_GATT_PRIMARY_SERVICE(&UUID16_CHIPoBLEService.uuid), |
| BT_GATT_CHARACTERISTIC(&UUID128_CHIPoBLEChar_RX.uuid, |
| BT_GATT_CHRC_WRITE | BT_GATT_CHRC_WRITE_WITHOUT_RESP, |
| BT_GATT_PERM_READ | BT_GATT_PERM_WRITE, |
| nullptr, BLEManagerImpl::HandleRXWrite, nullptr), |
| BT_GATT_CHARACTERISTIC(&UUID128_CHIPoBLEChar_TX.uuid, |
| BT_GATT_CHRC_INDICATE, |
| BT_GATT_PERM_NONE, |
| nullptr, nullptr, nullptr), |
| BT_GATT_CCC_MANAGED(&CHIPoBLEChar_TX_CCC, BT_GATT_PERM_READ | BT_GATT_PERM_WRITE) |
| ); |
| |
| // clang-format on |
| |
| // Index of the CCC descriptor in the CHIPoBLE_Service array of attributes. |
| // This value should be adjusted accordingly if the service declaration changes. |
| constexpr int kCHIPoBLE_CCC_AttributeIndex = 3; |
| |
| } // unnamed namespace |
| |
| BLEManagerImpl BLEManagerImpl::sInstance; |
| |
| CHIP_ERROR BLEManagerImpl::_Init() |
| { |
| CHIP_ERROR err; |
| |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Enabled; |
| mFlags.ClearAll().Set(Flags::kAdvertisingEnabled, CHIP_DEVICE_CONFIG_CHIPOBLE_ENABLE_ADVERTISING_AUTOSTART); |
| mGAPConns = 0; |
| |
| memset(mSubscribedConns, 0, sizeof(mSubscribedConns)); |
| |
| err = bt_enable(NULL); |
| VerifyOrExit(err == CHIP_NO_ERROR, err = MapErrorZephyr(err)); |
| |
| memset(&mConnCallbacks, 0, sizeof(mConnCallbacks)); |
| mConnCallbacks.connected = HandleConnect; |
| mConnCallbacks.disconnected = HandleDisconnect; |
| |
| bt_conn_cb_register(&mConnCallbacks); |
| |
| // Initialize the CHIP BleLayer. |
| err = BleLayer::Init(this, this, &SystemLayer); |
| SuccessOrExit(err); |
| |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| exit: |
| return err; |
| } |
| |
| void BLEManagerImpl::DriveBLEState(intptr_t arg) |
| { |
| BLEMgrImpl().DriveBLEState(); |
| } |
| |
| void BLEManagerImpl::DriveBLEState() |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| ChipLogDetail(DeviceLayer, "In DriveBLEState"); |
| |
| // Perform any initialization actions that must occur after the CHIP task is running. |
| if (!mFlags.Has(Flags::kAsyncInitCompleted)) |
| { |
| mFlags.Set(Flags::kAsyncInitCompleted); |
| |
| // If CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED is enabled, |
| // disable CHIPoBLE advertising if the device is fully provisioned. |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| if (ConfigurationMgr().IsFullyProvisioned()) |
| { |
| mFlags.Clear(Flags::kAdvertisingEnabled); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising disabled because device is fully provisioned"); |
| } |
| #endif // CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| } |
| |
| // If the application has enabled CHIPoBLE and BLE advertising... |
| if (mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_Enabled && |
| mFlags.Has(Flags::kAdvertisingEnabled) |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_SINGLE_CONNECTION |
| // and no connections are active... |
| && (NumConnections() == 0) |
| #endif |
| ) |
| { |
| // Start/re-start advertising if not already advertising, or if the |
| // advertising state needs to be refreshed. |
| if (!mFlags.HasAny(Flags::kAdvertising, Flags::kAdvertisingRefreshNeeded)) |
| { |
| err = StartAdvertising(); |
| SuccessOrExit(err); |
| } |
| } |
| // Otherwise, stop advertising if currently active. |
| else |
| { |
| err = StopAdvertising(); |
| SuccessOrExit(err); |
| } |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| } |
| } |
| |
| struct BLEManagerImpl::ServiceData |
| { |
| uint8_t uuid[2]; |
| ChipBLEDeviceIdentificationInfo deviceIdInfo; |
| } __attribute__((packed)); |
| |
| CHIP_ERROR BLEManagerImpl::StartAdvertising(void) |
| { |
| CHIP_ERROR err; |
| |
| const char * deviceName = bt_get_name(); |
| const uint8_t advFlags = BT_LE_AD_GENERAL | BT_LE_AD_NO_BREDR; |
| bt_le_adv_param advParams = BT_LE_ADV_PARAM_INIT(BT_LE_ADV_OPT_CONNECTABLE | BT_LE_ADV_OPT_ONE_TIME, GetAdvertisingInterval(), |
| CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL, nullptr); |
| |
| // Define advertising data |
| ServiceData serviceData; |
| bt_data ad[] = { BT_DATA(BT_DATA_FLAGS, &advFlags, sizeof(advFlags)), |
| BT_DATA(BT_DATA_SVC_DATA16, &serviceData, sizeof(serviceData)), |
| BT_DATA(BT_DATA_NAME_COMPLETE, deviceName, static_cast<uint8_t>(strlen(deviceName))) }; |
| |
| // Initialize service data |
| static_assert(sizeof(serviceData) == 9, "Size of BLE advertisement data changed! Was that intentional?"); |
| chip::Encoding::LittleEndian::Put16(serviceData.uuid, UUID16_CHIPoBLEService.val); |
| err = ConfigurationMgr().GetBLEDeviceIdentificationInfo(serviceData.deviceIdInfo); |
| SuccessOrExit(err); |
| |
| // If necessary, inform the ThreadStackManager that CHIPoBLE advertising is about to start. |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| if (!mFlags.Has(Flags::kAdvertising)) |
| { |
| ThreadStackMgr().OnCHIPoBLEAdvertisingStart(); |
| } |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| |
| // Restart advertising |
| err = bt_le_adv_stop(); |
| VerifyOrExit(err == CHIP_NO_ERROR, err = MapErrorZephyr(err)); |
| |
| err = bt_le_adv_start(&advParams, ad, ARRAY_SIZE(ad), nullptr, 0u); |
| if (err == -ENOMEM) |
| { |
| // No free connection objects for connectable advertiser. Advertise as non-connectable instead. |
| advParams.options &= ~BT_LE_ADV_OPT_CONNECTABLE; |
| err = bt_le_adv_start(&advParams, ad, ARRAY_SIZE(ad), nullptr, 0u); |
| } |
| |
| VerifyOrExit(err == CHIP_NO_ERROR, err = MapErrorZephyr(err)); |
| |
| // Transition to the Advertising state... |
| if (!mFlags.Has(Flags::kAdvertising)) |
| { |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising started"); |
| |
| mFlags.Set(Flags::kAdvertising); |
| |
| // Post a CHIPoBLEAdvertisingChange(Started) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Started; |
| PlatformMgr().PostEvent(&advChange); |
| } |
| |
| // Start timer to disable CHIPoBLE advertisement after timeout expiration |
| SystemLayer.StartTimer(CHIP_DEVICE_CONFIG_BLE_ADVERTISING_TIMEOUT, HandleBLEAdvertisementTimeout, this); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::StopAdvertising(void) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| err = bt_le_adv_stop(); |
| VerifyOrExit(err == CHIP_NO_ERROR, err = MapErrorZephyr(err)); |
| |
| // Transition to the not Advertising state... |
| if (mFlags.Has(Flags::kAdvertising)) |
| { |
| mFlags.Clear(Flags::kAdvertising); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising stopped"); |
| |
| #if CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| // Directly inform the ThreadStackManager that CHIPoBLE advertising has stopped. |
| ThreadStackMgr().OnCHIPoBLEAdvertisingStop(); |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_THREAD |
| |
| // Post a CHIPoBLEAdvertisingChange(Stopped) event. |
| { |
| ChipDeviceEvent advChange; |
| advChange.Type = DeviceEventType::kCHIPoBLEAdvertisingChange; |
| advChange.CHIPoBLEAdvertisingChange.Result = kActivity_Stopped; |
| PlatformMgr().PostEvent(&advChange); |
| } |
| |
| // Cancel timer event disabling CHIPoBLE advertisement after timeout expiration |
| SystemLayer.CancelTimer(HandleBLEAdvertisementTimeout, this); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetCHIPoBLEServiceMode(CHIPoBLEServiceMode val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(val != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_INVALID_ARGUMENT); |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (val != mServiceMode) |
| { |
| mServiceMode = val; |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetAdvertisingEnabled(bool val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (mFlags.Has(Flags::kAdvertisingEnabled) != val) |
| { |
| ChipLogDetail(DeviceLayer, "SetAdvertisingEnabled(%s)", val ? "true" : "false"); |
| |
| mFlags.Set(Flags::kAdvertisingEnabled, val); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetFastAdvertisingEnabled(bool val) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| VerifyOrExit(mServiceMode == ConnectivityManager::kCHIPoBLEServiceMode_NotSupported, err = CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE); |
| |
| if (mFlags.Has(Flags::kFastAdvertisingEnabled) != val) |
| { |
| ChipLogDetail(DeviceLayer, "SetFastAdvertisingEnabled(%s)", val ? "true" : "false"); |
| |
| mFlags.Set(Flags::kFastAdvertisingEnabled, val); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| |
| exit: |
| return err; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_GetDeviceName(char * buf, size_t bufSize) |
| { |
| size_t len = bufSize - 1; |
| |
| strncpy(buf, bt_get_name(), len); |
| buf[len] = 0; |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::_SetDeviceName(const char * deviceName) |
| { |
| if (mServiceMode != ConnectivityManager::kCHIPoBLEServiceMode_NotSupported) |
| { |
| return CHIP_ERROR_UNSUPPORTED_CHIP_FEATURE; |
| } |
| |
| ChipLogDetail(DeviceLayer, "Device name set to: %s", deviceName); |
| return MapErrorZephyr(bt_set_name(deviceName)); |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleGAPConnect(const ChipDeviceEvent * event) |
| { |
| const BleConnEventType * connEvent = &event->Platform.BleConnEvent; |
| |
| if (connEvent->HciResult == BT_HCI_ERR_SUCCESS) |
| { |
| ChipLogProgress(DeviceLayer, "BLE connection established (ConnId: 0x%02" PRIx16 ")", bt_conn_index(connEvent->BtConn)); |
| mGAPConns++; |
| } |
| else |
| { |
| ChipLogProgress(DeviceLayer, "BLE connection failed (reason: 0x%02" PRIx16 ")", connEvent->HciResult); |
| } |
| |
| ChipLogProgress(DeviceLayer, "Current number of connections: %" PRIu16 "/%" PRIu16, NumConnections(), CONFIG_BT_MAX_CONN); |
| |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| bt_conn_unref(connEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleGAPDisconnect(const ChipDeviceEvent * event) |
| { |
| const BleConnEventType * connEvent = &event->Platform.BleConnEvent; |
| |
| ChipLogProgress(DeviceLayer, "BLE GAP connection terminated (reason 0x%02" PRIx16 ")", connEvent->HciResult); |
| |
| mGAPConns--; |
| |
| // If indications were enabled for this connection, record that they are now disabled and |
| // notify the BLE Layer of a disconnect. |
| if (UnsetSubscribed(connEvent->BtConn)) |
| { |
| CHIP_ERROR disconReason; |
| switch (connEvent->HciResult) |
| { |
| case BT_HCI_ERR_REMOTE_USER_TERM_CONN: |
| // Do not treat proper connection termination as an error and exit. |
| VerifyOrExit(!ConfigurationMgr().IsFullyProvisioned(), ); |
| disconReason = BLE_ERROR_REMOTE_DEVICE_DISCONNECTED; |
| break; |
| case BT_HCI_ERR_LOCALHOST_TERM_CONN: |
| disconReason = BLE_ERROR_APP_CLOSED_CONNECTION; |
| break; |
| default: |
| disconReason = BLE_ERROR_CHIPOBLE_PROTOCOL_ABORT; |
| break; |
| } |
| HandleConnectionError(connEvent->BtConn, disconReason); |
| } |
| |
| exit: |
| // Unref bt_conn before scheduling DriveBLEState. |
| bt_conn_unref(connEvent->BtConn); |
| |
| ChipLogProgress(DeviceLayer, "Current number of connections: %" PRIu16 "/%" PRIu16, NumConnections(), CONFIG_BT_MAX_CONN); |
| |
| // Force a reconfiguration of advertising in case we switched to non-connectable mode when |
| // the BLE connection was established. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleTXCharCCCDWrite(const ChipDeviceEvent * event) |
| { |
| const BleCCCWriteEventType * writeEvent = &event->Platform.BleCCCWriteEvent; |
| |
| ChipLogDetail(DeviceLayer, "ConnId: 0x%02" PRIx16 ", New CCCD value: 0x%04" PRIx16, bt_conn_index(writeEvent->BtConn), |
| writeEvent->Value); |
| |
| // If the client has requested to enabled indications and if it is not yet subscribed |
| if (writeEvent->Value == BT_GATT_CCC_INDICATE && SetSubscribed(writeEvent->BtConn)) |
| { |
| // Alert the BLE layer that CHIPoBLE "subscribe" has been received and increment the bt_conn reference counter. |
| HandleSubscribeReceived(writeEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| |
| ChipLogProgress(DeviceLayer, "CHIPoBLE connection established (ConnId: 0x%02" PRIx16 ", GATT MTU: %" PRIu16 ")", |
| bt_conn_index(writeEvent->BtConn), GetMTU(writeEvent->BtConn)); |
| |
| // Post a CHIPoBLEConnectionEstablished event to the DeviceLayer and the application. |
| { |
| ChipDeviceEvent conEstEvent; |
| conEstEvent.Type = DeviceEventType::kCHIPoBLEConnectionEstablished; |
| PlatformMgr().PostEvent(&conEstEvent); |
| } |
| } |
| else |
| { |
| if (UnsetSubscribed(writeEvent->BtConn)) |
| { |
| HandleUnsubscribeReceived(writeEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| } |
| } |
| |
| bt_conn_unref(writeEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleRXCharWrite(const ChipDeviceEvent * event) |
| { |
| const BleC1WriteEventType * c1WriteEvent = &event->Platform.BleC1WriteEvent; |
| |
| ChipLogDetail(DeviceLayer, "Write request received for CHIPoBLE RX characteristic (ConnId 0x%02" PRIx16 ")", |
| bt_conn_index(c1WriteEvent->BtConn)); |
| |
| HandleWriteReceived(c1WriteEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_RX, |
| PacketBufferHandle::Adopt(c1WriteEvent->Data)); |
| bt_conn_unref(c1WriteEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| CHIP_ERROR BLEManagerImpl::HandleTXComplete(const ChipDeviceEvent * event) |
| { |
| const BleC2IndDoneEventType * c2IndDoneEvent = &event->Platform.BleC2IndDoneEvent; |
| |
| ChipLogDetail(DeviceLayer, "Indication for CHIPoBLE TX characteristic done (ConnId 0x%02" PRIx16 ", result 0x%02" PRIx16 ")", |
| bt_conn_index(c2IndDoneEvent->BtConn), c2IndDoneEvent->Result); |
| |
| // Signal the BLE Layer that the outstanding indication is complete. |
| HandleIndicationConfirmation(c2IndDoneEvent->BtConn, &CHIP_BLE_SVC_ID, &chipUUID_CHIPoBLEChar_TX); |
| bt_conn_unref(c2IndDoneEvent->BtConn); |
| |
| return CHIP_NO_ERROR; |
| } |
| |
| void BLEManagerImpl::HandleBLEAdvertisementTimeout(System::Layer * layer, void * param, System::Error error) |
| { |
| BLEMgr().SetAdvertisingEnabled(false); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising disabled because of timeout expired"); |
| } |
| |
| void BLEManagerImpl::_OnPlatformEvent(const ChipDeviceEvent * event) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| |
| switch (event->Type) |
| { |
| case DeviceEventType::kPlatformZephyrBleConnected: |
| err = HandleGAPConnect(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleDisconnected: |
| err = HandleGAPDisconnect(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleCCCWrite: |
| err = HandleTXCharCCCDWrite(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleC1WriteEvent: |
| err = HandleRXCharWrite(event); |
| break; |
| |
| case DeviceEventType::kPlatformZephyrBleC2IndDoneEvent: |
| err = HandleTXComplete(event); |
| break; |
| |
| case DeviceEventType::kFabricMembershipChange: |
| case DeviceEventType::kServiceProvisioningChange: |
| case DeviceEventType::kAccountPairingChange: |
| |
| // If CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED is enabled, and there is a change to the |
| // device's provisioning state, then automatically disable CHIPoBLE advertising if the device |
| // is now fully provisioned. |
| #if CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| if (ConfigurationMgr().IsFullyProvisioned()) |
| { |
| mFlags.Clear(Flags::kAdvertisingEnabled); |
| ChipLogProgress(DeviceLayer, "CHIPoBLE advertising disabled because device is fully provisioned"); |
| } |
| #endif // CHIP_DEVICE_CONFIG_CHIPOBLE_DISABLE_ADVERTISING_WHEN_PROVISIONED |
| |
| // Force the advertising state to be refreshed to reflect new provisioning state. |
| mFlags.Set(Flags::kAdvertisingRefreshNeeded); |
| |
| DriveBLEState(); |
| |
| break; |
| |
| default: |
| break; |
| } |
| |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "Disabling CHIPoBLE service due to error: %s", ErrorStr(err)); |
| mServiceMode = ConnectivityManager::kCHIPoBLEServiceMode_Disabled; |
| PlatformMgr().ScheduleWork(DriveBLEState, 0); |
| } |
| } |
| |
| uint16_t BLEManagerImpl::_NumConnections(void) |
| { |
| return mGAPConns; |
| } |
| |
| bool BLEManagerImpl::CloseConnection(BLE_CONNECTION_OBJECT conId) |
| { |
| ChipLogProgress(DeviceLayer, "Closing BLE GATT connection (ConnId %02" PRIx16 ")", bt_conn_index(conId)); |
| return bt_conn_disconnect(conId, BT_HCI_ERR_REMOTE_USER_TERM_CONN) == CHIP_NO_ERROR; |
| } |
| |
| uint16_t BLEManagerImpl::GetMTU(BLE_CONNECTION_OBJECT conId) const |
| { |
| return bt_gatt_get_mtu(conId); |
| } |
| |
| bool BLEManagerImpl::SubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::UnsubscribeCharacteristic(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendIndication(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| CHIP_ERROR err = CHIP_NO_ERROR; |
| uint8_t index = bt_conn_index(conId); |
| bt_gatt_indicate_params * params = &mIndicateParams[index]; |
| |
| VerifyOrExit(IsSubscribed(conId) == true, err = CHIP_ERROR_INVALID_ARGUMENT); |
| |
| ChipLogDetail(DeviceLayer, "Sending indication for CHIPoBLE TX characteristic (ConnId %u, len %u)", index, pBuf->DataLength()); |
| |
| params->uuid = nullptr; |
| params->attr = &CHIPoBLE_Service.attrs[kCHIPoBLE_CCC_AttributeIndex]; |
| params->func = HandleTXIndicated; |
| params->data = pBuf->Start(); |
| params->len = pBuf->DataLength(); |
| |
| err = bt_gatt_indicate(conId, params); |
| VerifyOrExit(err == CHIP_NO_ERROR, err = MapErrorZephyr(err)); |
| |
| exit: |
| if (err != CHIP_NO_ERROR) |
| { |
| ChipLogError(DeviceLayer, "BLEManagerImpl::SendIndication() failed: %s", ErrorStr(err)); |
| } |
| |
| return err == CHIP_NO_ERROR; |
| } |
| |
| bool BLEManagerImpl::SendWriteRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendReadRequest(BLE_CONNECTION_OBJECT conId, const ChipBleUUID * svcId, const ChipBleUUID * charId, |
| PacketBufferHandle pBuf) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| bool BLEManagerImpl::SendReadResponse(BLE_CONNECTION_OBJECT conId, BLE_READ_REQUEST_CONTEXT requestContext, |
| const ChipBleUUID * svcId, const ChipBleUUID * charId) |
| { |
| ChipLogError(DeviceLayer, "%s: NOT IMPLEMENTED", __PRETTY_FUNCTION__); |
| return true; |
| } |
| |
| void BLEManagerImpl::NotifyChipConnectionClosed(BLE_CONNECTION_OBJECT conId) |
| { |
| // Intentionally empty. |
| } |
| |
| bool BLEManagerImpl::IsSubscribed(bt_conn * conn) |
| { |
| return mSubscribedConns[bt_conn_index(conn)]; |
| } |
| |
| bool BLEManagerImpl::SetSubscribed(bt_conn * conn) |
| { |
| uint8_t index = bt_conn_index(conn); |
| bool isSubscribed = mSubscribedConns[index]; |
| mSubscribedConns[index] = true; |
| |
| // If we were not subscribed previously, increment the reference counter of the connection. |
| if (!isSubscribed) |
| { |
| bt_conn_ref(conn); |
| } |
| |
| return !isSubscribed; |
| } |
| |
| bool BLEManagerImpl::UnsetSubscribed(bt_conn * conn) |
| { |
| uint8_t index = bt_conn_index(conn); |
| bool isSubscribed = mSubscribedConns[index]; |
| mSubscribedConns[index] = false; |
| |
| // If we were subscribed previously, decrement the reference counter of the connection. |
| if (isSubscribed) |
| { |
| bt_conn_unref(conn); |
| } |
| |
| return isSubscribed; |
| } |
| |
| uint32_t BLEManagerImpl::GetAdvertisingInterval() |
| { |
| return (NumConnections() == 0 && !ConfigurationMgr().IsFullyProvisioned()) || mFlags.Has(Flags::kFastAdvertisingEnabled) |
| ? CHIP_DEVICE_CONFIG_BLE_FAST_ADVERTISING_INTERVAL |
| : CHIP_DEVICE_CONFIG_BLE_SLOW_ADVERTISING_INTERVAL; |
| } |
| |
| ssize_t BLEManagerImpl::HandleRXWrite(struct bt_conn * conId, const struct bt_gatt_attr * attr, const void * buf, uint16_t len, |
| uint16_t offset, uint8_t flags) |
| { |
| ChipDeviceEvent event; |
| PacketBufferHandle packetBuf = PacketBufferHandle::NewWithData(buf, len); |
| |
| // Unfortunately the Zephyr logging macros end up assigning uint16_t |
| // variables to uint16_t:10 fields, which triggers integer conversion |
| // warnings. And treating the Zephyr headers as system headers does not |
| // help, apparently. Just turn off that warning around this log call. |
| #pragma GCC diagnostic push |
| #pragma GCC diagnostic ignored "-Wconversion" |
| LOG_HEXDUMP_DBG(buf, len, "Rx char write"); |
| #pragma GCC diagnostic pop |
| |
| // If successful... |
| if (!packetBuf.IsNull()) |
| { |
| // Arrange to post a CHIPoBLERXWriteEvent event to the CHIP queue. |
| event.Type = DeviceEventType::kPlatformZephyrBleC1WriteEvent; |
| event.Platform.BleC1WriteEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleC1WriteEvent.Data = std::move(packetBuf).UnsafeRelease(); |
| } |
| |
| // If we failed to allocate a buffer, post a kPlatformZephyrBleOutOfBuffersEvent event. |
| else |
| { |
| event.Type = DeviceEventType::kPlatformZephyrBleOutOfBuffersEvent; |
| } |
| |
| PlatformMgr().PostEvent(&event); |
| |
| return len; |
| } |
| |
| ssize_t BLEManagerImpl::HandleTXCCCWrite(struct bt_conn * conId, const struct bt_gatt_attr * attr, uint16_t value) |
| { |
| ChipDeviceEvent event; |
| |
| if (value != BT_GATT_CCC_INDICATE && value != 0) |
| { |
| return BT_GATT_ERR(BT_ATT_ERR_VALUE_NOT_ALLOWED); |
| } |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleCCCWrite; |
| event.Platform.BleCCCWriteEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleCCCWriteEvent.Value = value; |
| |
| PlatformMgr().PostEvent(&event); |
| |
| return sizeof(value); |
| } |
| |
| void BLEManagerImpl::HandleTXIndicated(struct bt_conn * conId, IndicationAttrType, uint8_t err) |
| { |
| ChipDeviceEvent event; |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleC2IndDoneEvent; |
| event.Platform.BleC2IndDoneEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleC2IndDoneEvent.Result = err; |
| |
| PlatformMgr().PostEvent(&event); |
| } |
| |
| void BLEManagerImpl::HandleConnect(struct bt_conn * conId, uint8_t err) |
| { |
| ChipDeviceEvent event; |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleConnected; |
| event.Platform.BleConnEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleConnEvent.HciResult = err; |
| |
| PlatformMgr().PostEvent(&event); |
| } |
| |
| void BLEManagerImpl::HandleDisconnect(struct bt_conn * conId, uint8_t reason) |
| { |
| ChipDeviceEvent event; |
| |
| event.Type = DeviceEventType::kPlatformZephyrBleDisconnected; |
| event.Platform.BleConnEvent.BtConn = bt_conn_ref(conId); |
| event.Platform.BleConnEvent.HciResult = reason; |
| |
| PlatformMgr().PostEvent(&event); |
| } |
| |
| } // namespace Internal |
| } // namespace DeviceLayer |
| } // namespace chip |
| |
| #endif // CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
