| # |
| # Copyright (c) 2024 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # |
| # @file |
| # CMake sub-project defining 'chip' target which represents CHIP library |
| # and other optional libraries like unit tests, built with 'nxp_zephyr' |
| # platform. |
| # Since CHIP doesn't provide native CMake support, ExternalProject |
| # module is used to build the required artifacts with GN meta-build |
| # system. It is assumed that find_package(Zephyr) has been called before |
| # including this file. |
| # |
| |
| if (CONFIG_CHIP) |
| |
| include(ExternalProject) |
| include(../../zephyr/ota-image.cmake) |
| include(../../zephyr/zephyr-util.cmake) |
| include(generate_factory_data.cmake) |
| |
| # ============================================================================== |
| # Prepare CHIP configuration based on the project Kconfig configuration |
| # ============================================================================== |
| |
| # Set paths |
| |
| if (NOT CHIP_ROOT) |
| get_filename_component(CHIP_ROOT ${CMAKE_CURRENT_SOURCE_DIR}/../../.. REALPATH) |
| endif() |
| get_filename_component(GN_ROOT_TARGET ${CHIP_ROOT}/config/nxp/chip-gn REALPATH) |
| |
| include(${CHIP_ROOT}/config/nxp/cmake/common.cmake) |
| |
| # Prepare compiler flags |
| if (CHIP_CFLAGS) |
| matter_add_flags("${CHIP_CFLAGS}") |
| endif() |
| |
| matter_add_cxxflags(-D_POSIX_C_SOURCE=200809) |
| |
| if (CONFIG_ARM) |
| matter_add_cflags(--specs=nosys.specs) |
| endif() |
| |
| if(CONFIG_MBEDTLS) |
| zephyr_include_directories($<TARGET_PROPERTY:mbedTLS,INTERFACE_INCLUDE_DIRECTORIES>) |
| zephyr_compile_definitions($<TARGET_PROPERTY:mbedTLS,INTERFACE_COMPILE_DEFINITIONS>) |
| endif() |
| |
| zephyr_include_directories(${CHIP_ROOT}/src/platform/nxp/zephyr) |
| |
| zephyr_get_compile_flags(ZEPHYR_CFLAGS_C C) |
| matter_add_cflags("${ZEPHYR_CFLAGS_C}") |
| zephyr_get_compile_flags(ZEPHYR_CFLAGS_CC CXX) |
| matter_add_cxxflags("${ZEPHYR_CFLAGS_CC}") |
| zephyr_get_gnu_cpp_standard(ZEPHYR_GNU_CPP_STD) |
| matter_add_cxxflags(${ZEPHYR_GNU_CPP_STD}) |
| |
| # Set up custom OpenThread configuration |
| |
| if (CONFIG_CHIP_OPENTHREAD_CONFIG) |
| get_filename_component(CHIP_OPENTHREAD_CONFIG |
| ${CONFIG_CHIP_OPENTHREAD_CONFIG} |
| REALPATH |
| BASE_DIR ${CMAKE_SOURCE_DIR} |
| ) |
| zephyr_set_openthread_config(${CHIP_OPENTHREAD_CONFIG}) |
| endif() |
| |
| # Set up Zephyr symbol level |
| |
| if (NOT CONFIG_CHIP_DEBUG_SYMBOLS) |
| set_compiler_property(PROPERTY debug -g0) |
| endif() |
| |
| # Determine if ccache should be used |
| |
| get_property(CHIP_COMPILER_LAUNCHER GLOBAL PROPERTY RULE_LAUNCH_COMPILE) |
| |
| # ============================================================================== |
| # Generate configuration for CHIP GN build system |
| # ============================================================================== |
| |
| matter_common_gn_args( |
| DEBUG CONFIG_DEBUG |
| LIB_SHELL CONFIG_CHIP_LIB_SHELL |
| LIB_TESTS CONFIG_CHIP_BUILD_TESTS |
| PROJECT_CONFIG ${CONFIG_CHIP_PROJECT_CONFIG} |
| DEVICE_INFO_EXAMPLE_PROVIDER CONFIG_CHIP_EXAMPLE_DEVICE_INFO_PROVIDER |
| ) |
| matter_add_gn_arg_string("zephyr_ar" ${CMAKE_AR}) |
| matter_add_gn_arg_string("zephyr_cc" ${CMAKE_C_COMPILER}) |
| matter_add_gn_arg_string("zephyr_cxx" ${CMAKE_CXX_COMPILER}) |
| |
| if (CONFIG_CHIP_FACTORY_DATA) |
| matter_add_gn_arg_bool("chip_use_transitional_commissionable_data_provider" FALSE) |
| matter_add_gn_arg_bool("chip_enable_factory_data" TRUE) |
| elseif (CONFIG_CHIP_FACTORY_DATA_CUSTOM_BACKEND) |
| matter_add_gn_arg_bool("chip_use_transitional_commissionable_data_provider" FALSE) |
| endif() |
| |
| if (CONFIG_NET_L2_OPENTHREAD) |
| matter_add_gn_arg_string("chip_mdns" "platform") |
| elseif(CONFIG_WIFI_NXP OR CONFIG_CHIP_ETHERNET) |
| matter_add_gn_arg_string("chip_mdns" "minimal") |
| else() |
| matter_add_gn_arg_string("chip_mdns" "none") |
| endif() |
| |
| |
| # if (BOARD STREQUAL "native_posix") |
| # matter_add_gn_arg_string("target_cpu" "x86") |
| # elseif (BOARD STREQUAL "native_posix_64") |
| # matter_add_gn_arg_string("target_cpu" "x64") |
| # endif() |
| |
| # if (CHIP_COMPILER_LAUNCHER) |
| # matter_add_gn_arg_string("pw_command_launcher" ${CHIP_COMPILER_LAUNCHER}) |
| # endif() |
| |
| # if (CONFIG_CHIP_PW_RPC) |
| # set(PIGWEED_DIR "//third_party/pigweed/repo") |
| # matter_add_gn_arg_string("pw_assert_BACKEND" ${PIGWEED_DIR}/pw_assert_log:check_backend) |
| # matter_add_gn_arg_string("pw_log_BACKEND" ${PIGWEED_DIR}/pw_log_basic) |
| # matter_add_gn_arg("pw_build_LINK_DEPS" [\"${PIGWEED_DIR}/pw_assert:impl\",\ \"${PIGWEED_DIR}/pw_log:impl\"]) |
| # endif() |
| |
| matter_generate_args_tmp_file() |
| |
| # ============================================================================== |
| # Build chip library |
| # ============================================================================== |
| |
| matter_build(chip |
| LIB_SHELL ${CONFIG_CHIP_LIB_SHELL} |
| LIB_TESTS ${CONFIG_CHIP_BUILD_TESTS} |
| DEVICE_INFO_EXAMPLE_PROVIDER ${CONFIG_CHIP_EXAMPLE_DEVICE_INFO_PROVIDER} |
| GN_DEPENDENCIES kernel |
| ) |
| |
| set_property(GLOBAL APPEND PROPERTY ZEPHYR_INTERFACE_LIBS chip) |
| # Enable visibility of POSIX.1-2008 functions, such as strnlen |
| target_compile_definitions(chip INTERFACE _POSIX_C_SOURCE=200809) |
| # Make sure that kernel symbols that are only referenced by the Matter libraries are resolved. |
| target_link_libraries(chip INTERFACE $<TARGET_FILE:kernel>) |
| |
| if (CONFIG_CHIP_MALLOC_SYS_HEAP_OVERRIDE) |
| target_link_options(chip INTERFACE |
| -Wl,--wrap=malloc |
| -Wl,--wrap=calloc |
| -Wl,--wrap=realloc |
| -Wl,--wrap=free |
| -Wl,--wrap=_malloc_r |
| -Wl,--wrap=_calloc_r |
| -Wl,--wrap=_realloc_r |
| -Wl,--wrap=_free_r |
| ) |
| endif() |
| |
| # ============================================================================== |
| # Define 'chip-ota-image' target for building CHIP OTA image |
| # ============================================================================== |
| if(CONFIG_CHIP_OTA_REQUESTOR) |
| if(CONFIG_MCUBOOT_SIGNATURE_KEY_FILE STREQUAL "") |
| set(ZEPHYR_OUTPUT_NAME "zephyr") |
| else() |
| set(ZEPHYR_OUTPUT_NAME "zephyr.signed") |
| endif() |
| |
| set(GLOBAL_BOOTLOADER_CONF_OVERLAY_FILE "${CHIP_ROOT}/config/nxp/app/bootloader.conf") |
| |
| add_custom_target(build_mcuboot ALL |
| COMMAND |
| west build -b ${BOARD} -d build_mcuboot ${ZEPHYR_BASE}/../bootloader/mcuboot/boot/zephyr |
| -- -DOVERLAY_CONFIG=${GLOBAL_BOOTLOADER_CONF_OVERLAY_FILE} |
| -DEXTRA_DTC_OVERLAY_FILE="${DTC_OVERLAY_FILE};${EXTRA_DTC_OVERLAY_FILE}" |
| COMMAND |
| cp ${PROJECT_BINARY_DIR}/../modules/connectedhomeip/build_mcuboot/zephyr/zephyr.bin ${PROJECT_BINARY_DIR}/zephyr.mcuboot.bin |
| ) |
| add_dependencies(build_mcuboot ${ZEPHYR_FINAL_EXECUTABLE}) |
| set(BLOCK_SIZE "1024") |
| dt_nodelabel(dts_partition_path NODELABEL "boot_partition") |
| dt_reg_size(mcuboot_size PATH ${dts_partition_path}) |
| math(EXPR boot_blocks "${mcuboot_size} / ${BLOCK_SIZE}" OUTPUT_FORMAT DECIMAL) |
| |
| add_custom_target(merge_mcuboot ALL |
| COMMAND |
| dd if=${PROJECT_BINARY_DIR}/zephyr.mcuboot.bin of=${PROJECT_BINARY_DIR}/zephyr_full.bin |
| COMMAND |
| dd if=${PROJECT_BINARY_DIR}/${ZEPHYR_OUTPUT_NAME}.bin of=${PROJECT_BINARY_DIR}/zephyr_full.bin bs=${BLOCK_SIZE} seek=${boot_blocks} |
| ) |
| add_dependencies(merge_mcuboot build_mcuboot) |
| |
| if (CONFIG_CHIP_OTA_IMAGE_BUILD) |
| chip_ota_image(chip-ota-image |
| INPUT_FILES ${PROJECT_BINARY_DIR}/${ZEPHYR_OUTPUT_NAME}.bin |
| OUTPUT_FILE ${PROJECT_BINARY_DIR}/${CONFIG_CHIP_OTA_IMAGE_FILE_NAME} |
| ) |
| endif() |
| endif() |
| |
| # ============================================================================== |
| # Define 'factory_data' target for generating a factory data partition |
| # ============================================================================== |
| |
| if (CONFIG_CHIP_FACTORY_DATA_BUILD) |
| nxp_generate_factory_data() |
| endif() |
| |
| endif() # CONFIG_CHIP |