| # |
| # Copyright (c) 2024 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| # The purpose of this file is to define new default values of settings used when building Matter samples. |
| # This file only changes defaults and thus all symbols here must be promptless |
| # and safeguarded so that they only are applied when building Matter. |
| |
| if CHIP |
| |
| config CHIP_OPERATIONAL_TIME_SAVE_INTERVAL |
| default 1 |
| |
| if CHIP_FACTORY_DATA |
| |
| config CHIP_DEVICE_VENDOR_ID |
| default 4151 # 0x1037 |
| |
| config CHIP_DEVICE_MANUFACTURING_DATE |
| default "2023-01-01" |
| |
| config CHIP_DEVICE_PRODUCT_ID |
| default 41510 if SOC_SERIES_RW6XX |
| |
| endif # CHIP_FACTORY_DATA |
| |
| config LOG |
| default y |
| |
| if LOG |
| |
| choice LOG_MODE |
| default LOG_MODE_MINIMAL |
| endchoice |
| |
| choice MATTER_LOG_LEVEL_CHOICE |
| default MATTER_LOG_LEVEL_DBG |
| endchoice |
| |
| config CHIP_APP_LOG_LEVEL |
| default 4 # debug |
| |
| config LOG_DEFAULT_LEVEL |
| default 1 # error |
| |
| config CHIP_LOG_SIZE_OPTIMIZATION |
| default y |
| |
| endif |
| |
| config PRINTK_SYNC |
| default y |
| |
| config ASSERT |
| default y |
| |
| config ASSERT_NO_COND_INFO |
| default y |
| |
| config ASSERT_NO_MSG_INFO |
| default y |
| |
| config HW_STACK_PROTECTION |
| default y |
| |
| config FPU |
| default y |
| |
| config SHELL |
| default y |
| |
| config PTHREAD_IPC |
| bool |
| default n |
| |
| config POSIX_MAX_FDS |
| int |
| default 8 |
| |
| # Application stack size |
| config MAIN_STACK_SIZE |
| default 3072 |
| |
| config INIT_STACKS |
| default y |
| |
| config NET_MGMT_EVENT_STACK_SIZE |
| default 1024 |
| |
| config NET_MGMT_EVENT_QUEUE_SIZE |
| default 20 |
| |
| config NET_IPV6_MLD |
| default y |
| |
| config NET_IF_MCAST_IPV6_ADDR_COUNT |
| default 14 |
| |
| config NET_IF_MAX_IPV4_COUNT |
| default 2 |
| |
| config NET_IF_MAX_IPV6_COUNT |
| default 2 |
| |
| config NET_TC_TX_COUNT |
| default 1 |
| |
| config NET_TC_RX_COUNT |
| default 1 |
| |
| config NET_TC_THREAD_PRIO_CUSTOM |
| default y |
| |
| choice NET_TC_THREAD_TYPE |
| default NET_TC_THREAD_PREEMPTIVE |
| endchoice |
| |
| config NET_TCP_WORKER_PRIO |
| default -16 |
| |
| config NET_TC_TX_THREAD_BASE_PRIO |
| default 3 |
| |
| config NET_TC_RX_THREAD_BASE_PRIO |
| default 3 |
| |
| config NET_TC_SKIP_FOR_HIGH_PRIO |
| default y |
| |
| config NET_CONTEXT_PRIORITY |
| default y |
| |
| # Network buffers |
| config NET_PKT_RX_COUNT |
| default 14 |
| |
| config NET_PKT_TX_COUNT |
| default 14 |
| |
| config NET_BUF_RX_COUNT |
| default 36 |
| |
| config NET_BUF_TX_COUNT |
| default 36 |
| |
| config NET_BUF_DATA_SIZE |
| default 256 |
| |
| # Bluetooth Low Energy configs |
| |
| config BT |
| default y |
| |
| config BT_PERIPHERAL |
| default y |
| |
| config BT_CENTRAL |
| default n |
| |
| config BT_PERIPHERAL_PREF_MIN_INT |
| default 36 |
| |
| config BT_PERIPHERAL_PREF_MAX_INT |
| default 36 |
| |
| # Increase BT timeout to 5 s to improve connection reliability and avoid fast drop outs. |
| config BT_PERIPHERAL_PREF_TIMEOUT |
| default 500 |
| |
| config BT_GAP_AUTO_UPDATE_CONN_PARAMS |
| default y |
| |
| # Decrease connection parameters update time, as some Matter controllers request |
| # enabling IP networking faster than BT connection parameters are updated, what may result |
| # in commissioning instabilities. |
| config BT_CONN_PARAM_UPDATE_TIMEOUT |
| default 1000 |
| |
| config BT_GATT_DYNAMIC_DB |
| default y |
| |
| config BT_DEVICE_NAME_DYNAMIC |
| default y |
| |
| config BT_DEVICE_NAME_MAX |
| default 15 |
| |
| config BT_MAX_CONN |
| default 1 |
| |
| config BT_L2CAP_TX_MTU |
| default 247 |
| |
| config BT_BUF_ACL_RX_SIZE |
| default 251 |
| |
| config BT_BUF_ACL_TX_SIZE |
| default 251 |
| |
| config BT_RX_STACK_SIZE |
| default 2048 if NO_OPTIMIZATIONS && DEBUG |
| default 1700 |
| |
| config BT_LONG_WQ_STACK_SIZE |
| default 1024 |
| |
| config BT_DEVICE_NAME_GATT_WRITABLE |
| bool |
| default n |
| |
| config HCI_NXP_ENABLE_AUTO_SLEEP |
| default n |
| |
| config CHIP_OTA_REQUESTOR |
| default n |
| |
| config CHIP_DEVICE_SOFTWARE_VERSION |
| default 1 |
| |
| # Enable extended discovery |
| config CHIP_EXTENDED_DISCOVERY |
| default y |
| |
| config NVS_LOOKUP_CACHE |
| default y |
| |
| config NVS_LOOKUP_CACHE_SIZE |
| default 1024 |
| |
| if CHIP_WIFI |
| |
| choice NXP_WIFI_PART |
| default NXP_RW610 if SOC_SERIES_RW6XX |
| endchoice |
| |
| config ZVFS_OPEN_MAX |
| default 30 |
| |
| choice SCHED_ALGORITHM |
| default SCHED_MULTIQ |
| endchoice |
| |
| choice WIFI_NM_WPA_SUPPLICANT_LOG_LEVEL_CHOICE |
| default WIFI_NM_WPA_SUPPLICANT_LOG_LEVEL_INF |
| endchoice |
| |
| choice WIFI_NM_WPA_SUPPLICANT_CRYPTO_BACKEND |
| default WIFI_NM_WPA_SUPPLICANT_CRYPTO_ALT |
| endchoice |
| |
| config WIFI_NM_WPA_SUPPLICANT_THREAD_STACK_SIZE |
| default 6144 |
| |
| config WIFI_NM_WPA_SUPPLICANT_WQ_STACK_SIZE |
| default 5120 |
| |
| config WIFI_NM_WPA_SUPPLICANT_INF_MON |
| default n |
| |
| config SYSTEM_WORKQUEUE_STACK_SIZE |
| default 2048 |
| |
| config NET_TCP_WORKQ_STACK_SIZE |
| default 2048 |
| |
| # align these numbers to match the OpenThread config |
| config NET_IF_UNICAST_IPV6_ADDR_COUNT |
| default 6 |
| |
| config NET_IF_MCAST_IPV6_ADDR_COUNT |
| default 8 |
| |
| config NET_SOCKETS_POLL_MAX |
| default 14 |
| |
| config NET_IPV4_FRAGMENT_MAX_COUNT |
| default 3 |
| |
| config NET_IPV4_FRAGMENT_MAX_PKT |
| default 7 |
| |
| config NET_IPV4_FRAGMENT_TIMEOUT |
| default 3 |
| |
| config NET_IPV6_FRAGMENT_MAX_COUNT |
| default 3 |
| |
| config NET_IPV6_FRAGMENT_MAX_PKT |
| default 8 |
| |
| config NET_IPV6_FRAGMENT_TIMEOUT |
| default 3 |
| |
| # options managed by IP4/IP6 simultaneous support |
| # aligned here to match OpenThread config |
| config NET_MAX_ROUTERS |
| default 1 |
| |
| config NET_MAX_CONN |
| default 10 |
| |
| config SHELL_STACK_SIZE |
| default 2616 |
| |
| config HEAP_MEM_POOL_SIZE |
| default 122880 |
| |
| config CHIP_MALLOC_SYS_HEAP_SIZE |
| default 28672 # 28 kB |
| |
| endif |
| |
| if CHIP_ETHERNET || CHIP_WIFI |
| |
| choice LIBC_IMPLEMENTATION |
| default NEWLIB_LIBC |
| endchoice |
| |
| endif |
| |
| if CHIP_ETHERNET |
| |
| choice NXP_ENET_DRIVER |
| default ETH_NXP_ENET |
| endchoice |
| |
| config NET_SOCKETS_POLL_MAX |
| default 7 |
| |
| endif |
| |
| # Configure MBEDTLS lib |
| config MBEDTLS |
| default y |
| |
| config MBEDTLS_CFG_FILE |
| default "config-tls-generic.h" |
| |
| config MBEDTLS_USER_CONFIG_ENABLE |
| default y |
| |
| config MBEDTLS_USER_CONFIG_FILE |
| default "nxp-zephyr-mbedtls-config.h" |
| |
| config MBEDTLS_ENTROPY_ENABLED |
| default y |
| |
| config MBEDTLS_ZEPHYR_ENTROPY |
| default y |
| |
| config MBEDTLS_SSL_MAX_CONTENT_LEN |
| default 8192 |
| |
| config MBEDTLS_ENABLE_HEAP |
| default y |
| |
| config MBEDTLS_HEAP_SIZE |
| default 15360 |
| |
| config MBEDTLS_CIPHER_AES_ENABLED |
| default y |
| |
| config MBEDTLS_CIPHER_CCM_ENABLED |
| default y |
| |
| config MBEDTLS_CTR_DRBG_ENABLED |
| default y |
| |
| config MBEDTLS_CIPHER_MODE_CBC_ENABLED |
| default y |
| |
| config MBEDTLS_ECP_C |
| default y |
| |
| config MBEDTLS_ECP_DP_SECP256R1_ENABLED |
| default y |
| |
| config CHIP_CRYPTO_PSA |
| default y |
| |
| if CHIP_CRYPTO_PSA |
| |
| config MBEDTLS_PSA_CRYPTO_C |
| default y |
| |
| config WIFI_NM_WPA_SUPPLICANT_CRYPTO_MBEDTLS_PSA |
| default y if WIFI_NM_WPA_SUPPLICANT |
| |
| endif |
| |
| config MCUX_ELS_PKC |
| default y if SOC_SERIES_RW6XX |
| |
| if MCUX_ELS_PKC |
| |
| config MCUX_PSA_CRYPTO_DRIVER_ELS_PKC |
| default y if CHIP_CRYPTO_PSA |
| |
| config MCUX_PSA_CRYPTO_DRIVER_ELS_PKC_THREAD |
| default y if CHIP_CRYPTO_PSA |
| |
| config ENTROPY_GENERATOR |
| default y |
| |
| endif # MCUX_ELS_PKC |
| |
| |
| if SHELL |
| |
| config KERNEL_SHELL |
| default y |
| |
| config DEVICE_SHELL |
| default y |
| |
| config REBOOT |
| default y |
| |
| # Disable not used shell modules |
| config SHELL_WILDCARD |
| default n |
| |
| config SHELL_VT100_COLORS |
| default n |
| |
| config SHELL_STATS |
| default n |
| |
| config SENSOR_SHELL |
| default n |
| |
| config DATE_SHELL |
| default n |
| |
| config DEVMEM_SHELL |
| default n |
| |
| config MCUBOOT_SHELL |
| default n |
| |
| config FLASH_SHELL |
| default n |
| |
| endif # SHELL |
| |
| endif |