examples/lighting-app/efr32/include/hal-config-app-common.h

/*
 *
 *    Copyright (c) 2020 Project CHIP Authors
 *    All rights reserved.
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */
/******************************************************************************
 * @file
 * @brief hal-config-app-common.h
 *******************************************************************************
 * # License
 * <b>Copyright 2018 Silicon Laboratories Inc. www.silabs.com</b>
 *******************************************************************************
 *
 * The licensor of this software is Silicon Laboratories Inc. Your use of this
 * software is governed by the terms of Silicon Labs Master Software License
 * Agreement (MSLA) available at
 * www.silabs.com/about-us/legal/master-software-license-agreement. This
 * software is distributed to you in Source Code format and is governed by the
 * sections of the MSLA applicable to Source Code.
 *
 ******************************************************************************/

#ifndef HAL_CONFIG_APP_COMMON_H
#define HAL_CONFIG_APP_COMMON_H

#include "em_device.h"
#include "hal-config-types.h"

#if defined(FEATURE_IOEXPANDER)
#include "hal-config-ioexp.h"
#endif

#define HAL_EXTFLASH_FREQUENCY (1000000)

#define HAL_PTI_ENABLE (1)
#define HAL_PTI_MODE (HAL_PTI_MODE_UART)
#define HAL_PTI_BAUD_RATE (1600000)

#define HAL_PA_RAMP (10)
#define HAL_PA_2P4_LOWPOWER (0)
#define HAL_PA_POWER (252)
#define HAL_PA_CURVE_HEADER "pa_curves_efr32.h"

#define HAL_PA_VOLTAGE BSP_PA_VOLTAGE

// Select antenna path on EFR32xG2x devices:
//   - RF2G2_IO1: 0
//   - RF2G2_IO2: 1
#define GECKO_RF_ANTENNA 1
#if defined(FEATURE_EXP_HEADER_USART3)

#define BSP_EXP_USART USART3

#define BSP_EXP_USART_CTS_PIN BSP_USART3_CTS_PIN
#define BSP_EXP_USART_CTS_PORT BSP_USART3_CTS_PORT
#define BSP_EXP_USART_CTS_LOC BSP_USART3_CTS_LOC

#define BSP_EXP_USART_RTS_PIN BSP_USART3_RTS_PIN
#define BSP_EXP_USART_RTS_PORT BSP_USART3_RTS_PORT
#define BSP_EXP_USART_RTS_LOC BSP_USART3_RTS_LOC

#define BSP_EXP_USART_RX_PIN BSP_USART3_RX_PIN
#define BSP_EXP_USART_RX_PORT BSP_USART3_RX_PORT
#define BSP_EXP_USART_RX_LOC BSP_USART3_RX_LOC

#define BSP_EXP_USART_TX_PIN BSP_USART3_TX_PIN
#define BSP_EXP_USART_TX_PORT BSP_USART3_TX_PORT
#define BSP_EXP_USART_TX_LOC BSP_USART3_TX_LOC

#elif defined(FEATURE_EXP_HEADER_USART1)

#define BSP_EXP_USART USART1

#define BSP_EXP_USART_CTS_PIN BSP_USART1_CTS_PIN
#define BSP_EXP_USART_CTS_PORT BSP_USART1_CTS_PORT
#define BSP_EXP_USART_CTS_LOC BSP_USART1_CTS_LOC

#define BSP_EXP_USART_RTS_PIN BSP_USART1_RTS_PIN
#define BSP_EXP_USART_RTS_PORT BSP_USART1_RTS_PORT
#define BSP_EXP_USART_RTS_LOC BSP_USART1_RTS_LOC

#define BSP_EXP_USART_RX_PIN BSP_USART1_RX_PIN
#define BSP_EXP_USART_RX_PORT BSP_USART1_RX_PORT
#define BSP_EXP_USART_RX_LOC BSP_USART1_RX_LOC

#define BSP_EXP_USART_TX_PIN BSP_USART1_TX_PIN
#define BSP_EXP_USART_TX_PORT BSP_USART1_TX_PORT
#define BSP_EXP_USART_TX_LOC BSP_USART1_TX_LOC

#else

#define BSP_EXP_USART USART0

#define BSP_EXP_USART_CTS_PIN BSP_USART0_CTS_PIN
#define BSP_EXP_USART_CTS_PORT BSP_USART0_CTS_PORT
#define BSP_EXP_USART_CTS_LOC BSP_USART0_CTS_LOC

#define BSP_EXP_USART_RTS_PIN BSP_USART0_RTS_PIN
#define BSP_EXP_USART_RTS_PORT BSP_USART0_RTS_PORT
#define BSP_EXP_USART_RTS_LOC BSP_USART0_RTS_LOC

#define BSP_EXP_USART_RX_PIN BSP_USART0_RX_PIN
#define BSP_EXP_USART_RX_PORT BSP_USART0_RX_PORT
#define BSP_EXP_USART_RX_LOC BSP_USART0_RX_LOC

#define BSP_EXP_USART_TX_PIN BSP_USART0_TX_PIN
#define BSP_EXP_USART_TX_PORT BSP_USART0_TX_PORT
#define BSP_EXP_USART_TX_LOC BSP_USART0_TX_LOC

#endif // FEATURE_EXP_HEADER_USART3

#endif /* HAL_CONFIG_APP_COMMON_H */