| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * Copyright (c) 2019 Google LLC. |
| * All rights reserved. |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * Example project configuration file for CHIP. |
| * |
| * This is a place to put application or project-specific overrides |
| * to the default configuration values for general CHIP features. |
| * |
| */ |
| |
| #pragma once |
| |
| // Use a default setup PIN code if one hasn't been provisioned in flash. |
| #ifndef CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE |
| #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_PIN_CODE 20202021 |
| #endif |
| #define CHIP_DEVICE_CONFIG_USE_TEST_SETUP_DISCRIMINATOR 0xF00 |
| |
| // shell app uses openthread but does not have the NETWORK_COMMISSIONING cluster or zap config |
| // Do not instantiate the NETWORK_COMMISSIONING thread driver |
| #define _NO_GENERIC_THREAD_NETWORK_COMMISSIONING_DRIVER_ |
| |
| // For convenience, enable Chip Security Test Mode and disable the requirement for |
| // authentication in various protocols. |
| // |
| // WARNING: These options make it possible to circumvent basic Chip security functionality, |
| // including message encryption. Because of this they MUST NEVER BE ENABLED IN PRODUCTION BUILDS. |
| // |
| #define CHIP_CONFIG_SECURITY_TEST_MODE 0 |
| |
| /** |
| * CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID |
| * |
| * 0xFFF1: Test vendor. |
| */ |
| #ifndef CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID |
| #define CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID 0xFFF1 |
| #endif // CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID |
| |
| /** |
| * CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID |
| * |
| * 0x8009: example shell |
| */ |
| #ifndef CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID |
| #define CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID 0x8012 |
| #endif // CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID |
| |
| /** |
| * CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION |
| * |
| * The hardware version number assigned to device or product by the device vendor. This |
| * number is scoped to the device product id, and typically corresponds to a revision of the |
| * physical device, a change to its packaging, and/or a change to its marketing presentation. |
| * This value is generally *not* incremented for device software versions. |
| */ |
| #define CHIP_DEVICE_CONFIG_DEVICE_HARDWARE_VERSION 1 |
| |
| /** |
| * CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING |
| * |
| * A string identifying the software version running on the device. |
| * CHIP service currently expects the software version to be in the format |
| * {MAJOR_VERSION}.0d{MINOR_VERSION} |
| */ |
| #ifndef CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING |
| #define CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING "0.1ALPHA" |
| #endif |
| /** |
| * CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE |
| * |
| * Enable support for Chip-over-BLE (CHIPoBLE). |
| */ |
| #define CHIP_DEVICE_CONFIG_ENABLE_CHIPOBLE 1 |
| |
| /** |
| * CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER |
| * |
| * Enables the use of a hard-coded default serial number if none |
| * is found in Chip NV storage. |
| */ |
| #define CHIP_DEVICE_CONFIG_TEST_SERIAL_NUMBER "TEST_SN" |
| |
| /** |
| * CHIP_DEVICE_CONFIG_THREAD_ENABLE_CLI |
| * |
| * Enable Thread CLI interface at initialisation. |
| */ |
| #define CHIP_DEVICE_CONFIG_THREAD_ENABLE_CLI 1 |
| |
| /** |
| * @def CHIP_CONFIG_MAX_FABRICS |
| * |
| * @brief |
| * Maximum number of fabrics the device can participate in. Each fabric can |
| * provision the device with its unique operational credentials and manage |
| * its own access control lists. |
| */ |
| // !Note - 3 is not spec compliant, only to accomodate shell test app RAM use |
| #define CHIP_CONFIG_MAX_FABRICS 3 |
| |
| /** |
| * @name Interaction Model object pool configuration. |
| * |
| * @brief |
| * The following definitions sets the maximum number of corresponding interaction model object pool size. |
| * |
| * * #CHIP_IM_MAX_NUM_COMMAND_HANDLER |
| * * #CHIP_IM_MAX_REPORTS_IN_FLIGHT |
| * * #CHIP_IM_MAX_NUM_WRITE_HANDLER |
| * * #CHIP_IM_MAX_NUM_WRITE_CLIENT |
| * |
| * @{ |
| */ |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_COMMAND_HANDLER |
| * |
| * @brief Defines the maximum number of CommandHandler, limits the number of active commands transactions on server. |
| */ |
| #define CHIP_IM_MAX_NUM_COMMAND_HANDLER 2 |
| |
| /** |
| * @def CHIP_IM_MAX_REPORTS_IN_FLIGHT |
| * |
| * @brief Defines the maximum number of Reports, limits the traffic of read and subscription transactions. |
| */ |
| #define CHIP_IM_MAX_REPORTS_IN_FLIGHT 2 |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_WRITE_HANDLER |
| * |
| * @brief Defines the maximum number of WriteHandler, limits the number of active write transactions on server. |
| */ |
| #define CHIP_IM_MAX_NUM_WRITE_HANDLER 2 |
| |
| /** |
| * @def CHIP_IM_MAX_NUM_WRITE_CLIENT |
| * |
| * @brief Defines the maximum number of WriteClient, limits the number of active write transactions on client. |
| */ |
| #define CHIP_IM_MAX_NUM_WRITE_CLIENT 2 |