| /** |
| * |
| * Copyright (c) 2020-2023 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #import <Foundation/Foundation.h> |
| |
| #import <Matter/MTRCluster.h> |
| #import <Matter/MTRDefines.h> |
| |
| @class MTRSetupPayload; |
| @class MTRDeviceController; |
| |
| NS_ASSUME_NONNULL_BEGIN |
| |
| /** |
| * Handler for read attribute response, write attribute response, invoke command response and reports. |
| * |
| * Handler will receive either values or error. Either one of the parameters will be nil. |
| * |
| * @param values Received values are an NSArray object with response-value element as described below. |
| * |
| * A response-value is an NSDictionary object with the following key values: |
| * |
| * MTRAttributePathKey : MTRAttributePath object. Included for attribute value. |
| * MTRCommandPathKey : MTRCommandPath object. Included for command response. |
| * MTREventPathKey : MTREventPath object. Included for event value. |
| * MTRErrorKey : NSError object. Included to indicate an error. |
| * MTRDataKey: Data-value NSDictionary object. |
| * Included when there is data and when there is no error. |
| * The data-value is described below. |
| * MTREventNumberKey : NSNumber-wrapped uint64_t value. Monotonically increasing, and consecutive event reports |
| * should have consecutive numbers unless device reboots, or if events are lost. |
| * Only present when both MTREventPathKey and MTRDataKey are present. |
| * MTREventPriorityKey : NSNumber-wrapped MTREventPriority value. |
| * Only present when both MTREventPathKey and MTRDataKey are present. |
| * MTREventTimeTypeKey : NSNumber-wrapped MTREventTimeType value. |
| * Only present when both MTREventPathKey and MTRDataKey are present. |
| * MTREventSystemUpTimeKey : NSNumber-wrapped NSTimeInterval value. |
| * Only present when MTREventTimeTypeKey is MTREventTimeTypeSystemUpTime. |
| * MTREventTimestampDateKey : NSDate object. |
| * Only present when MTREventTimeTypeKey is MTREventTimeTypeTimestampDate. |
| * |
| * Only one of MTREventTimestampDateKey and MTREventSystemUpTimeKey will be present, depending on the value for |
| * MTREventTimeTypeKey. |
| * |
| * A data-value is an NSDictionary object with the following key values: |
| * |
| * MTRTypeKey : data type. MTRSignedIntegerValueType, MTRUnsignedIntegerValueType, MTRBooleanValueType, |
| * MTRUTF8StringValueType, MTROctetStringValueType, MTRFloatValueType, MTRDoubleValueType, |
| * MTRNullValueType, MTRStructureValueType or MTRArrayValueType. |
| * |
| * MTRValueKey : data value. Per each data type, data value shall be the following object: |
| * |
| * MTRSignedIntegerValueType: NSNumber object. |
| * MTRUnsignedIntegerValueType: NSNumber object. |
| * MTRBooleanValueType: NSNumber object. |
| * MTRUTF8StringValueType: NSString object. |
| * MTROctetStringValueType: NSData object. |
| * MTRFloatValueType: NSNumber object. |
| * MTRDoubleValueType: NSNumber object. |
| * MTRNullValueType: "value" key will not be included. |
| * MTRStructureValueType: structure-value NSArray object. |
| * See below for the definition of structure-value. |
| * MTRArrayValueType: Array-value NSArray object. See below for the definition of array-value. |
| * |
| * A structure-value is an NSArray object with NSDictionary objects as its elements. Each dictionary element will |
| * contain the following key values. |
| * |
| * MTRContextTagKey : NSNumber object as context tag. |
| * MTRDataKey : Data-value NSDictionary object. |
| * |
| * An array-value is an NSArray object with NSDictionary objects as its elements. Each dictionary element will |
| * contain the following key values. |
| * |
| * MTRDataKey : Data-value NSDictionary object. |
| */ |
| typedef void (^MTRDeviceResponseHandler)(NSArray<NSDictionary<NSString *, id> *> * _Nullable values, NSError * _Nullable error); |
| |
| /** |
| * Handler for -subscribeWithQueue: attribute and event reports |
| * |
| * @param values This array contains MTRAttributeReport objects for attribute reports, and MTREventReport objects for event reports |
| */ |
| typedef void (^MTRDeviceReportHandler)(NSArray * values); |
| typedef void (^MTRDeviceErrorHandler)(NSError * error); |
| |
| /** |
| * Handler for subscribeWithQueue: resubscription scheduling notifications. |
| * This will be called when subscription loss is detected. |
| * |
| * @param error An error indicating the reason the subscription has been lost. |
| * @param resubscriptionDelay A delay, in milliseconds, before the next |
| * automatic resubscription will be attempted. |
| */ |
| typedef void (^MTRDeviceResubscriptionScheduledHandler)(NSError * error, NSNumber * resubscriptionDelay); |
| |
| /** |
| * Handler for openCommissioningWindowWithSetupPasscode. |
| */ |
| API_AVAILABLE(ios(16.2), macos(13.1), watchos(9.2), tvos(16.2)) |
| typedef void (^MTRDeviceOpenCommissioningWindowHandler)(MTRSetupPayload * _Nullable payload, NSError * _Nullable error); |
| |
| extern NSString * const MTRAttributePathKey; |
| extern NSString * const MTRCommandPathKey; |
| extern NSString * const MTREventPathKey; |
| extern NSString * const MTRDataKey; |
| extern NSString * const MTRErrorKey; |
| extern NSString * const MTRTypeKey; |
| extern NSString * const MTRValueKey; |
| extern NSString * const MTRContextTagKey; |
| extern NSString * const MTRSignedIntegerValueType; |
| extern NSString * const MTRUnsignedIntegerValueType; |
| extern NSString * const MTRBooleanValueType; |
| extern NSString * const MTRUTF8StringValueType; |
| extern NSString * const MTROctetStringValueType; |
| extern NSString * const MTRFloatValueType; |
| extern NSString * const MTRDoubleValueType; |
| extern NSString * const MTRNullValueType; |
| extern NSString * const MTRStructureValueType; |
| extern NSString * const MTRArrayValueType; |
| extern NSString * const MTREventNumberKey API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| extern NSString * const MTREventPriorityKey API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| extern NSString * const MTREventTimeTypeKey API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| extern NSString * const MTREventSystemUpTimeKey API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| extern NSString * const MTREventTimestampDateKey API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| |
| @class MTRClusterStateCacheContainer; |
| @class MTRAttributeCacheContainer; |
| @class MTRReadParams; |
| @class MTRSubscribeParams; |
| |
| typedef NS_ENUM(uint8_t, MTRTransportType) { |
| MTRTransportTypeUndefined = 0, |
| MTRTransportTypeUDP, |
| MTRTransportTypeBLE, |
| MTRTransportTypeTCP, |
| } API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * A path indicating an attribute being requested (for read or subscribe). |
| * |
| * nil is used to represent wildcards. |
| */ |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)) |
| @interface MTRAttributeRequestPath : NSObject <NSCopying> |
| @property (nonatomic, readonly, copy, nullable) NSNumber * endpoint API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)) |
| ; |
| @property (nonatomic, readonly, copy, nullable) NSNumber * cluster API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| @property (nonatomic, readonly, copy, nullable) |
| NSNumber * attribute API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| + (MTRAttributeRequestPath *)requestPathWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| attributeID:(NSNumber * _Nullable)attributeID |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| @end |
| |
| /** |
| * A path indicating an event being requested (for read or subscribe). |
| * |
| * nil is used to represent wildcards. |
| */ |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)) |
| @interface MTREventRequestPath : NSObject <NSCopying> |
| @property (nonatomic, readonly, copy, nullable) NSNumber * endpoint API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)) |
| ; |
| @property (nonatomic, readonly, copy, nullable) NSNumber * cluster API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| @property (nonatomic, readonly, copy, nullable) NSNumber * event API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| + (MTREventRequestPath *)requestPathWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| eventID:(NSNumber * _Nullable)eventID |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| @end |
| |
| @interface MTRBaseDevice : NSObject |
| |
| - (instancetype)init NS_UNAVAILABLE; |
| + (instancetype)new NS_UNAVAILABLE; |
| |
| /** |
| * Create a device object with the given node id and controller. This |
| * will always succeed, even if there is no such node id on the controller's |
| * fabric, but attempts to actually use the MTRBaseDevice will fail |
| * (asynchronously) in that case. |
| */ |
| + (MTRBaseDevice *)deviceWithNodeID:(NSNumber *)nodeID |
| controller:(MTRDeviceController *)controller |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * The transport used by the current session with this device, or |
| * `MTRTransportTypeUndefined` if no session is currently active. |
| */ |
| @property (readonly) MTRTransportType sessionTransportType API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Subscribe to receive attribute reports for everything (all endpoints, all |
| * clusters, all attributes, all events) on the device. |
| * |
| * A non-nil attribute cache container will cache attribute values, retrievable |
| * through the designated attribute cache container. |
| * |
| * attributeReportHandler will be called any time a data update is available (with a |
| * non-nil "value") |
| * |
| * The array passed to attributeReportHandler will contain MTRAttributeReport |
| * instances. Errors for specific paths, not the whole subscription, will be |
| * reported via those objects. |
| * |
| * eventReportHandler will be called any time an event is reported (with a |
| * non-nil "value") |
| * |
| * The array passed to eventReportHandler will contain MTREventReport |
| * instances. Errors for specific paths, not the whole subscription, will be |
| * reported via those objects. |
| * |
| * errorHandler will be called any time there is an error for the entire |
| * subscription (with a non-nil "error"), and terminate the subscription. This |
| * will generally not be invoked if auto-resubscription is enabled, unless there |
| * is a fatal error during a resubscription attempt. |
| * |
| * Both report handlers are not supported over XPC at the moment. |
| * |
| * The subscriptionEstablished block, if not nil, will be called once the |
| * subscription is established. This will be _after_ the first (priming) call |
| * to both report handlers. Note that if the MTRSubscribeParams are set to |
| * automatically resubscribe this can end up being called more than once. |
| * |
| * The resubscriptionScheduled block, if not nil, will be called if |
| * auto-resubscription is enabled, subscription loss is detected, and a |
| * resubscription is scheduled. This can be called multiple times in a row |
| * without an intervening subscriptionEstablished call if the resubscription |
| * attempts fail. |
| */ |
| - (void)subscribeWithQueue:(dispatch_queue_t)queue |
| params:(MTRSubscribeParams *)params |
| clusterStateCacheContainer:(MTRClusterStateCacheContainer * _Nullable)clusterStateCacheContainer |
| attributeReportHandler:(MTRDeviceReportHandler _Nullable)attributeReportHandler |
| eventReportHandler:(MTRDeviceReportHandler _Nullable)eventReportHandler |
| errorHandler:(MTRDeviceErrorHandler)errorHandler |
| subscriptionEstablished:(MTRSubscriptionEstablishedHandler _Nullable)subscriptionEstablished |
| resubscriptionScheduled:(MTRDeviceResubscriptionScheduledHandler _Nullable)resubscriptionScheduled |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Reads attributes from the device. |
| * |
| * Nil values for endpointID, clusterID, attributeID indicate wildcards |
| * (e.g. nil attributeID means "read all the attributes from the endpoint(s) and |
| * cluster(s) that match endpointID/clusterID"). |
| * |
| * If all of endpointID, clusterID, attributeID are non-nil, a single |
| * attribute will be read. |
| * |
| * If all of endpointID, clusterID, attributeID are nil, all attributes on the |
| * device will be read. |
| * |
| * A non-nil attributeID along with a nil clusterID will only succeed if the |
| * attribute ID is for a global attribute that applies to all clusters. |
| * |
| * The completion will be called with an error if the entire read interaction fails. |
| * Otherwise it will be called with values, which may be empty (e.g. if no paths |
| * matched the wildcard) or may include per-path errors if particular paths |
| * failed. |
| */ |
| - (void)readAttributesWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| attributeID:(NSNumber * _Nullable)attributeID |
| params:(MTRReadParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceResponseHandler)completion |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Reads multiple attribute or event paths from the device. |
| * |
| * Nil is treated as an empty array for attributePaths and eventPaths. |
| * |
| * Lists of attribute and event paths to read can be provided via attributePaths and eventPaths. |
| * |
| * The completion will be called with an error if the entire read interaction fails. Otherwise it |
| * will be called with an array of values. This array may be empty (e.g. if no paths matched the |
| * wildcard paths passed in, or if empty lists of paths were passed in) or may include per-path |
| * errors if particular paths failed. |
| * |
| * If the sum of the lengths of attributePaths and eventPaths exceeds 9, the read may fail due to the device not supporting that |
| * many read paths. |
| */ |
| - (void)readAttributePaths:(NSArray<MTRAttributeRequestPath *> * _Nullable)attributePaths |
| eventPaths:(NSArray<MTREventRequestPath *> * _Nullable)eventPaths |
| params:(MTRReadParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceResponseHandler)completion API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| /** |
| * Write to attribute in a designated attribute path |
| * |
| * @param value A data-value NSDictionary object as described in |
| * MTRDeviceResponseHandler. |
| * |
| * @param timeoutMs timeout in milliseconds for timed write, or nil. |
| * |
| * @param completion response handler will receive either values or error. |
| * |
| * A path-specific error status will get turned into an error |
| * passed to the completion, so values will only be passed in |
| * when the write succeeds. In that case, values will have |
| * the format documented in the definition of |
| * MTRDeviceResponseHandler and will be an array with a single element |
| * which is a dictionary that has a MTRAttributePathKey entry in it, whose value |
| * is the attribute path that was successfully written to. |
| */ |
| - (void)writeAttributeWithEndpointID:(NSNumber *)endpointID |
| clusterID:(NSNumber *)clusterID |
| attributeID:(NSNumber *)attributeID |
| value:(id)value |
| timedWriteTimeout:(NSNumber * _Nullable)timeoutMs |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceResponseHandler)completion |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Invoke a command with a designated command path |
| * |
| * @param commandFields command fields object. The object must be a data-value NSDictionary object |
| * as described in the MTRDeviceResponseHandler. |
| * The attribute must be a Structure, i.e., |
| * the NSDictionary MTRTypeKey key must have the value MTRStructureValueType. |
| * |
| * @param timeoutMs timeout in milliseconds for timed invoke, or nil. |
| * |
| * @param completion response handler will receive either values or error. A |
| * path-specific error status from the command invocation |
| * will result in an error being passed to the completion, so |
| * values will only be passed in when the command succeeds. |
| */ |
| - (void)invokeCommandWithEndpointID:(NSNumber *)endpointID |
| clusterID:(NSNumber *)clusterID |
| commandID:(NSNumber *)commandID |
| commandFields:(id)commandFields |
| timedInvokeTimeout:(NSNumber * _Nullable)timeoutMs |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceResponseHandler)completion |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Subscribes to the specified attributes on the device. |
| * |
| * Nil values for endpointID, clusterID, attributeID indicate wildcards |
| * (e.g. nil attributeID means "subscribe to all the attributes from the |
| * endpoint(s) and cluster(s) that match endpointID/clusterID"). |
| * |
| * If all of endpointID, clusterID, attributeID are non-nil, a single attribute |
| * will be subscribed to. |
| * |
| * If all of endpointID, clusterID, attributeID are nil, all attributes on the |
| * device will be subscribed to. |
| * |
| * A non-nil attributeID along with a nil clusterID will only succeed if the |
| * attribute ID is for a global attribute that applies to all clusters. |
| * |
| * The reportHandler will be called with an error if the subscription fails |
| * entirely. |
| * |
| * The reportHandler will be called with arrays of response-value dictionaries |
| * (which may be data or errors) as path-specific data is received. |
| * |
| * subscriptionEstablished will be called when the subscription is first |
| * successfully established (after the initial set of data reports has been |
| * delivered to reportHandler). If params allow automatic resubscription, it |
| * will be called any time resubscription succeeds. |
| */ |
| - (void)subscribeToAttributesWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| attributeID:(NSNumber * _Nullable)attributeID |
| params:(MTRSubscribeParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| reportHandler:(MTRDeviceResponseHandler)reportHandler |
| subscriptionEstablished:(MTRSubscriptionEstablishedHandler _Nullable)subscriptionEstablished |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Subscribes to multiple attribute or event paths. |
| * |
| * Nil is treated as an empty array for attributePaths and eventPaths. |
| * |
| * Lists of attribute and event paths to subscribe to can be provided via attributePaths and eventPaths. |
| * |
| * The reportHandler will be called with an error if the subscription fails |
| * entirely (including when both attributePaths and eventPaths are empty). |
| * |
| * The reportHandler will be called with arrays of response-value dictionaries |
| * (which may be data or errors) as path-specific data is received. |
| * |
| * subscriptionEstablished will be called when the subscription is first |
| * successfully established (after the initial set of data reports has been |
| * delivered to reportHandler). If params allow automatic resubscription, it |
| * will be called any time resubscription succeeds. |
| * |
| * resubscriptionScheduled will be called if subscription drop is detected and |
| * params allow automatic resubscription. |
| * |
| * If the sum of the lengths of attributePaths and eventPaths exceeds 3, the subscribe may fail due to the device not supporting |
| * that many paths for a subscription. |
| */ |
| - (void)subscribeToAttributePaths:(NSArray<MTRAttributeRequestPath *> * _Nullable)attributePaths |
| eventPaths:(NSArray<MTREventRequestPath *> * _Nullable)eventPaths |
| params:(MTRSubscribeParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| reportHandler:(MTRDeviceResponseHandler)reportHandler |
| subscriptionEstablished:(MTRSubscriptionEstablishedHandler _Nullable)subscriptionEstablished |
| resubscriptionScheduled:(MTRDeviceResubscriptionScheduledHandler _Nullable)resubscriptionScheduled |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| /** |
| * Deregister all local report handlers for a remote device |
| * |
| * This method is applicable only for a remote device. For a local device, the stack has to be shutdown to stop report handlers. |
| * There could be multiple clients accessing a node through a remote controller object and hence it is not appropriate |
| * for one of those clients to shut down the entire stack to stop receiving reports. |
| */ |
| - (void)deregisterReportHandlersWithQueue:(dispatch_queue_t)queue |
| completion:(dispatch_block_t)completion |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Open a commissioning window on the device. |
| * |
| * On success, completion will be called on queue with the MTRSetupPayload that |
| * can be used to commission the device. |
| * |
| * @param setupPasscode The setup passcode to use for the commissioning window. |
| * See MTRSetupPayload's generateRandomSetupPasscode for |
| * generating a valid random passcode. |
| * @param discriminator The discriminator to use for the commissionable |
| * advertisement. |
| * @param duration Duration, in seconds, during which the commissioning |
| * window will be open. |
| */ |
| - (void)openCommissioningWindowWithSetupPasscode:(NSNumber *)setupPasscode |
| discriminator:(NSNumber *)discriminator |
| duration:(NSNumber *)duration |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceOpenCommissioningWindowHandler)completion |
| API_AVAILABLE(ios(16.2), macos(13.1), watchos(9.2), tvos(16.2)); |
| |
| /** |
| * Open a commissioning window on the device, using a random setup passcode. |
| * |
| * On success, completion will be called on queue with the MTRSetupPayload that |
| * can be used to commission the device. |
| * |
| * @param discriminator The discriminator to use for the commissionable |
| * advertisement. |
| * @param duration Duration, in seconds, during which the commissioning |
| * window will be open. |
| */ |
| - (void)openCommissioningWindowWithDiscriminator:(NSNumber *)discriminator |
| duration:(NSNumber *)duration |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceOpenCommissioningWindowHandler)completion |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| /** |
| * Reads events from the device. |
| * |
| * Nil values for endpointID, clusterID, eventID indicate wildcards |
| * (e.g. nil eventID means "read all the events from the endpoint(s) and |
| * cluster(s) that match endpointID/clusterID"). |
| * |
| * If all of endpointID, clusterID, eventID are non-nil, all the matching instances of a single |
| * event will be read. |
| * |
| * If all of endpointID, clusterID, eventID are nil, all events on the |
| * device will be read. |
| * |
| * The completion will be called with an error if the entire read interaction fails. |
| * Otherwise it will be called with values, which may be empty (e.g. if no paths |
| * matched the wildcard) or may include per-path errors if particular paths |
| * failed. |
| */ |
| |
| - (void)readEventsWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| eventID:(NSNumber * _Nullable)eventID |
| params:(MTRReadParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| completion:(MTRDeviceResponseHandler)completion |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| |
| /** |
| * Subscribes to the specified events on the device. |
| * |
| * Nil values for endpointID, clusterID, eventID indicate wildcards |
| * (e.g. nil eventID means "subscribe to all the events from the |
| * endpoint(s) and cluster(s) that match endpointID/clusterID"). |
| * |
| * If all of endpointID, clusterID, eventID are non-nil, a single event |
| * will be subscribed to. |
| * |
| * If all of endpointID, clusterID, eventID are nil, all events on the |
| * device will be subscribed to. |
| * |
| * The reportHandler will be called with an error if the subscription fails |
| * entirely. |
| * |
| * The reportHandler will be called with arrays of response-value dictionaries |
| * (which may be data or errors) as path-specific data is received. |
| * |
| * subscriptionEstablished will be called when the subscription is first |
| * successfully established (after the initial set of data reports has been |
| * delivered to reportHandler). If params allow automatic resubscription, it |
| * will be called any time resubscription succeeds. |
| */ |
| - (void)subscribeToEventsWithEndpointID:(NSNumber * _Nullable)endpointID |
| clusterID:(NSNumber * _Nullable)clusterID |
| eventID:(NSNumber * _Nullable)eventID |
| params:(MTRSubscribeParams * _Nullable)params |
| queue:(dispatch_queue_t)queue |
| reportHandler:(MTRDeviceResponseHandler)reportHandler |
| subscriptionEstablished:(MTRSubscriptionEstablishedHandler _Nullable)subscriptionEstablished |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| @end |
| |
| /** |
| * A path indicating a specific cluster on a device (i.e. without any |
| * wildcards). |
| */ |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)) |
| @interface MTRClusterPath : NSObject <NSCopying> |
| @property (nonatomic, readonly, copy) NSNumber * endpoint; |
| @property (nonatomic, readonly, copy) NSNumber * cluster; |
| |
| + (MTRClusterPath *)clusterPathWithEndpointID:(NSNumber *)endpointID clusterID:(NSNumber *)clusterID; |
| |
| - (instancetype)init NS_UNAVAILABLE; |
| + (instancetype)new NS_UNAVAILABLE; |
| @end |
| |
| /** |
| * A path indicating a specific attribute on a device (i.e. without any |
| * wildcards). |
| */ |
| @interface MTRAttributePath : MTRClusterPath |
| @property (nonatomic, readonly, copy) NSNumber * attribute; |
| |
| + (MTRAttributePath *)attributePathWithEndpointID:(NSNumber *)endpointID |
| clusterID:(NSNumber *)clusterID |
| attributeID:(NSNumber *)attributeID |
| API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| @end |
| |
| /** |
| * A path indicating a specific event that can be emitted on a device |
| * (i.e. without any wildcards). There can be multiple instances of actual |
| * events for a given event path. |
| */ |
| @interface MTREventPath : MTRClusterPath |
| @property (nonatomic, readonly, copy) NSNumber * event; |
| |
| + (MTREventPath *)eventPathWithEndpointID:(NSNumber *)endpointID |
| clusterID:(NSNumber *)clusterID |
| eventID:(NSNumber *)eventID API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| @end |
| |
| /** |
| * A path indicating a specific command on a device (i.e. without any |
| * wildcards). |
| */ |
| @interface MTRCommandPath : MTRClusterPath |
| @property (nonatomic, readonly, copy) NSNumber * command; |
| |
| + (MTRCommandPath *)commandPathWithEndpointID:(NSNumber *)endpointID |
| clusterID:(NSNumber *)clusterID |
| commandID:(NSNumber *)commandID API_AVAILABLE(ios(16.4), macos(13.3), watchos(9.4), tvos(16.4)); |
| @end |
| |
| @interface MTRAttributeReport : NSObject |
| @property (nonatomic, readonly, copy) MTRAttributePath * path; |
| |
| /** |
| * value will be nil in the following cases: |
| * |
| * * There was an error. In this case, "error" will not be nil. |
| * * The attribute is nullable and the value of the attribute is null. |
| * |
| * If value is not nil, the actual type of value will depend on the |
| * schema-defined (typically defiend in the Matter specification) type of the |
| * attribute as follows: |
| * |
| * * list: NSArray of whatever type the list entries are. |
| * * struct: The corresponding structure interface defined by Matter.framework |
| * * octet string: NSData |
| * * string: NSString |
| * * discrete/analog types: NSNumber |
| * |
| * Derived types (in the Matter specification sense) are represented the same as |
| * the base type, except for "string" (which is a derived type of "octet string" |
| * in the specification). |
| */ |
| @property (nonatomic, readonly, copy, nullable) id value; |
| |
| /** |
| * If this specific path resulted in an error, the error (in the |
| * MTRInteractionErrorDomain or MTRErrorDomain) that corresponds to this |
| * path. |
| */ |
| @property (nonatomic, readonly, copy, nullable) NSError * error; |
| |
| /** |
| * Initialize an MTRAttributeReport with a response-value dictionary of the sort |
| * that MTRDeviceResponseHandler would receive. |
| * |
| * Will return nil and hand out an error if the response-value dictionary is not |
| * an attribute response. |
| * |
| * Will set the value property to nil and the error property to non-nil, even if |
| * the schema for the value is not known, if the response-value is an error, not |
| * data. |
| * |
| * Will return nil and hand out an error if the response-value is data in the |
| * following cases: |
| * |
| * * The response is for a cluster/attribute combination for which the schema is |
| * unknown and hence the type of the data is not known. |
| * * The data does not match the known schema. |
| */ |
| - (nullable instancetype)initWithResponseValue:(NSDictionary<NSString *, id> *)responseValue |
| error:(NSError * __autoreleasing *)error |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| @end |
| |
| typedef NS_ENUM(NSUInteger, MTREventTimeType) { |
| MTREventTimeTypeSystemUpTime = 0, |
| MTREventTimeTypeTimestampDate |
| } API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| |
| typedef NS_ENUM(NSUInteger, MTREventPriority) { |
| MTREventPriorityDebug = 0, |
| MTREventPriorityInfo = 1, |
| MTREventPriorityCritical = 2 |
| } API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| |
| @interface MTREventReport : NSObject |
| @property (nonatomic, readonly, copy) MTREventPath * path; |
| |
| /** |
| * eventNumber will only have a useful value if "error" is nil. |
| */ |
| @property (nonatomic, readonly, copy) NSNumber * eventNumber; // EventNumber type (uint64_t) |
| |
| /** |
| * priority will only have a useful value if "error" is nil. |
| */ |
| @property (nonatomic, readonly, copy) NSNumber * priority; // PriorityLevel type (MTREventPriority) |
| |
| /** |
| * Either systemUpTime or timestampDate will be valid depending on |
| * eventTimeType, if "error" is nil. If "error" is not nil, none of |
| * eventTimeType, systemUpTime, timestampDate should be expected to have useful |
| * values. |
| */ |
| @property (nonatomic, readonly) MTREventTimeType eventTimeType API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| @property (nonatomic, readonly) NSTimeInterval systemUpTime API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| @property (nonatomic, readonly, copy, nullable) |
| NSDate * timestampDate API_AVAILABLE(ios(16.5), macos(13.4), watchos(9.5), tvos(16.5)); |
| |
| /** |
| * An instance of the event payload interface that corresponds to the report's |
| * path (e.g. MTRBasicInformationClusterStartUpEvent if the path's cluster |
| * 0x0028 "Basic Information" and the path's event is 0x00 "StartUp"), or nil if |
| * error is not nil (in which case there is no payload available). |
| */ |
| @property (nonatomic, readonly, copy, nullable) id value; |
| |
| /** |
| * If this specific path resulted in an error, the error (in the |
| * MTRInteractionErrorDomain or MTRErrorDomain) that corresponds to this |
| * path. |
| */ |
| @property (nonatomic, readonly, copy, nullable) NSError * error; |
| |
| /** |
| * Initialize an MTREventReport with a response-value dictionary of the sort |
| * that MTRDeviceResponseHandler would receive. |
| * |
| * Will return nil and hand out an error if the response-value dictionary is not |
| * an event response. |
| * |
| * Will set the value property to nil and the error property to non-nil, even if |
| * the schema for the value is not known, if the response-value is an error, not |
| * data. |
| * |
| * Will return nil and hand out an error if the response-value is data in the |
| * following cases: |
| * |
| * * The response is for a cluster/event combination for which the schema is |
| * unknown and hence the type of the data is not known. |
| * * The data does not match the known schema. |
| */ |
| - (nullable instancetype)initWithResponseValue:(NSDictionary<NSString *, id> *)responseValue |
| error:(NSError * __autoreleasing *)error |
| API_AVAILABLE(ios(17.0), macos(14.0), watchos(10.0), tvos(17.0)); |
| |
| @end |
| |
| @interface MTRBaseDevice (Deprecated) |
| |
| /** |
| * Deprecated MTRBaseDevice APIs. |
| */ |
| - (void)subscribeWithQueue:(dispatch_queue_t)queue |
| minInterval:(uint16_t)minInterval |
| maxInterval:(uint16_t)maxInterval |
| params:(MTRSubscribeParams * _Nullable)params |
| cacheContainer:(MTRAttributeCacheContainer * _Nullable)attributeCacheContainer |
| attributeReportHandler:(MTRDeviceReportHandler _Nullable)attributeReportHandler |
| eventReportHandler:(MTRDeviceReportHandler _Nullable)eventReportHandler |
| errorHandler:(MTRDeviceErrorHandler)errorHandler |
| subscriptionEstablished:(dispatch_block_t _Nullable)subscriptionEstablishedHandler |
| resubscriptionScheduled:(MTRDeviceResubscriptionScheduledHandler _Nullable)resubscriptionScheduledHandler |
| MTR_DEPRECATED("Please use " |
| "subscribeWithQueue:params:clusterStateCacheContainer:attributeReportHandler:eventReportHandler:errorHandler:" |
| "subscriptionEstablished:resubscriptionScheduled:", |
| ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| - (void)readAttributeWithEndpointId:(NSNumber * _Nullable)endpointId |
| clusterId:(NSNumber * _Nullable)clusterId |
| attributeId:(NSNumber * _Nullable)attributeId |
| params:(MTRReadParams * _Nullable)params |
| clientQueue:(dispatch_queue_t)clientQueue |
| completion:(MTRDeviceResponseHandler)completion |
| MTR_DEPRECATED("Please use readAttributesWithEndpointID:clusterID:attributeID:params:queue:completion:", ios(16.1, 16.4), |
| macos(13.0, 13.3), watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| - (void)writeAttributeWithEndpointId:(NSNumber *)endpointId |
| clusterId:(NSNumber *)clusterId |
| attributeId:(NSNumber *)attributeId |
| value:(id)value |
| timedWriteTimeout:(NSNumber * _Nullable)timeoutMs |
| clientQueue:(dispatch_queue_t)clientQueue |
| completion:(MTRDeviceResponseHandler)completion |
| MTR_DEPRECATED("Please use writeAttributeWithEndpointID:clusterID:attributeID:value:timedWriteTimeout:queue:completion:", |
| ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| - (void)invokeCommandWithEndpointId:(NSNumber *)endpointId |
| clusterId:(NSNumber *)clusterId |
| commandId:(NSNumber *)commandId |
| commandFields:(id)commandFields |
| timedInvokeTimeout:(NSNumber * _Nullable)timeoutMs |
| clientQueue:(dispatch_queue_t)clientQueue |
| completion:(MTRDeviceResponseHandler)completion |
| MTR_DEPRECATED("Please use invokeCommandWithEndpointID:clusterID:commandID:commandFields:timedInvokeTimeout:queue:completion", |
| ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| - (void)subscribeAttributeWithEndpointId:(NSNumber * _Nullable)endpointId |
| clusterId:(NSNumber * _Nullable)clusterId |
| attributeId:(NSNumber * _Nullable)attributeId |
| minInterval:(NSNumber *)minInterval |
| maxInterval:(NSNumber *)maxInterval |
| params:(MTRSubscribeParams * _Nullable)params |
| clientQueue:(dispatch_queue_t)clientQueue |
| reportHandler:(MTRDeviceResponseHandler)reportHandler |
| subscriptionEstablished:(dispatch_block_t _Nullable)subscriptionEstablishedHandler |
| MTR_DEPRECATED("Please use " |
| "subscribeToAttributesWithEndpointID:clusterID:attributeID:params:queue:" |
| "reportHandler:subscriptionEstablished:", |
| ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| - (void)deregisterReportHandlersWithClientQueue:(dispatch_queue_t)queue |
| completion:(dispatch_block_t)completion |
| MTR_DEPRECATED("Pease use deregisterReportHandlersWithQueue:completion:", ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), |
| tvos(16.1, 16.4)); |
| |
| @end |
| |
| @interface MTRAttributePath (Deprecated) |
| |
| + (instancetype)attributePathWithEndpointId:(NSNumber *)endpointId |
| clusterId:(NSNumber *)clusterId |
| attributeId:(NSNumber *)attributeId |
| MTR_DEPRECATED("Please use attributePathWithEndpointID:clusterID:attributeID:", ios(16.1, 16.4), macos(13.0, 13.3), |
| watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| @end |
| |
| @interface MTREventPath (Deprecated) |
| |
| + (instancetype)eventPathWithEndpointId:(NSNumber *)endpointId |
| clusterId:(NSNumber *)clusterId |
| eventId:(NSNumber *)eventId |
| MTR_DEPRECATED("Please use eventPathWithEndpointID:clusterID:eventID:", ios(16.1, 16.4), macos(13.0, 13.3), watchos(9.1, 9.4), |
| tvos(16.1, 16.4)); |
| |
| @end |
| |
| @interface MTRCommandPath (Deprecated) |
| |
| + (instancetype)commandPathWithEndpointId:(NSNumber *)endpointId |
| clusterId:(NSNumber *)clusterId |
| commandId:(NSNumber *)commandId |
| MTR_DEPRECATED("Please use commandPathWithEndpointID:clusterID:commandID:", ios(16.1, 16.4), macos(13.0, 13.3), |
| watchos(9.1, 9.4), tvos(16.1, 16.4)); |
| |
| @end |
| |
| @interface MTREventReport (Deprecated) |
| @property (nonatomic, readonly, copy) NSNumber * timestamp MTR_DEPRECATED( |
| "Please use timestampDate and systemUpTime", ios(16.1, 16.5), macos(13.0, 13.4), watchos(9.1, 9.5), tvos(16.1, 16.5)); |
| @end |
| |
| NS_ASSUME_NONNULL_END |
