| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| |
| name: 98.1.1. [TC-FLABEL-1.1] Global Attributes [DUT-server] |
| |
| PICS: |
| - FLABEL.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Fixed Label" |
| endpoint: 1 |
| |
| tests: |
| - label: "Wait for the commissioned device to be retrieved" |
| cluster: "DelayCommands" |
| command: "WaitForCommissionee" |
| arguments: |
| values: |
| - name: "nodeId" |
| value: nodeId |
| |
| - label: "TH reads the ClusterRevision from DUT" |
| PICS: FLABEL.S.Afffd |
| command: "readAttribute" |
| attribute: "ClusterRevision" |
| response: |
| value: 1 |
| constraints: |
| type: int16u |
| |
| - label: "TH reads the FeatureMap from DUT" |
| PICS: FLABEL.S.Afffc |
| command: "readAttribute" |
| attribute: "FeatureMap" |
| response: |
| value: 0 |
| constraints: |
| type: bitmap32 |
| |
| - label: "TH reads AttributeList from DUT" |
| PICS: FLABEL.S.Afffb |
| command: "readAttribute" |
| attribute: "AttributeList" |
| response: |
| constraints: |
| type: list |
| contains: [0, 65528, 65529, 65530, 65531, 65532, 65533] |
| |
| #List values range check support https://github.com/project-chip/connectedhomeip/issues/26570 |
| - label: |
| "TH reads AttributeList attribute from DUT. 1.The list SHALL NOT |
| contain any additional values in the standard or scoped range: |
| (0x0000_0000 - 0x0000_4FFF) and (0x0000_F000 - 0x0000_FFFE). 2.The |
| list MAY contain values in the Manufacturer Extensible Identifier |
| (MEI) range: (0xXXXX_0000 - 0xXXXX_4FFF), where XXXX is the allowed |
| MEI range (0x0001 - 0xFFF1), these values SHALL be ignored. 3.The list |
| SHALL NOT contain any values in the Test Vendor or invalid range: |
| (0x0000_5000 - 0x0000_EFFF and 0x0000_FFFF), (0xXXXX_5000 - |
| 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where XXXX is the |
| allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool fixedlabel read attribute-list 1 0 |
| |
| Verify "AttributeList" contains a list of mandatory attributes (value 0), global attributes (65528, 65529, 65530, 65531, 65532, 65533) on the TH(Chip-tool) Log: |
| |
| [1676283591.496609][6597:6599] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0040 Attribute 0x0000_FFFB DataVersion: 948836999 |
| [1676283591.496637][6597:6599] CHIP:TOO: AttributeList: 7 entries |
| [1676283591.496646][6597:6599] CHIP:TOO: [1]: 0 |
| [1676283591.496652][6597:6599] CHIP:TOO: [2]: 65528 |
| [1676283591.496658][6597:6599] CHIP:TOO: [3]: 65529 |
| [1676283591.496663][6597:6599] CHIP:TOO: [4]: 65530 |
| [1676283591.496669][6597:6599] CHIP:TOO: [5]: 65531 |
| [1676283591.496674][6597:6599] CHIP:TOO: [6]: 65532 |
| [1676283591.496680][6597:6599] CHIP:TOO: [7]: 65533 |
| [1676283591.496734][6597:6599] CHIP:EM: <<< [E:28165i M:228613411 (Ack:220149900)] (S) Msg TX to 1:000000 |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLABEL.S.Afffb |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads EventList attribute from DUT. 1.The list MAY contain values |
| in the Manufacturer Extensible Identifier (MEI) range: (0xXXXX_0000 - |
| 0xXXXX_00FF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1), |
| these values SHALL be ignored. 2.The list SHALL NOT contain any values |
| in the Test Vendor or invalid range: (0x0000_0100 - 0x0000_FFFF), |
| (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - 0xFFFF_FFFF), where |
| XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool fixedlabel read event-list 1 0 |
| |
| Verify "EventList" contains a list of supported events. for this cluster the list SHALL be empty(0 entries) on the TH(Chip-tool) Log: |
| |
| 1676374181.204773][11726:11728] CHIP:DMG: } |
| [1676374181.204925][11726:11728] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0040 Attribute 0x0000_FFFA DataVersion: 1038008956 |
| [1676374181.204971][11726:11728] CHIP:TOO: EventList: 0 entries |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLABEL.S.Afffa |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads AcceptedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool fixedlabel read accepted-command-list 1 0 |
| |
| Verify "AcceptedCommandList" contains a list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no accepted command on the TH(Chip-tool) Log: |
| |
| [1651124239.450485][2392:2397] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0040 Attribute 0x0000_FFF9 DataVersion: 3688229931 |
| [1651124239.450576][2392:2397] CHIP:TOO: AcceptedCommandList: 0 entries |
| [1651124239.450713][2392:2397] CHIP:EM: Sending Standalone Ack for MessageCounter:5032784 on exchange 23524i |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLABEL.S.Afff9 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |
| |
| - label: |
| "TH reads GeneratedCommandList attribute from DUT. 1.The list MAY |
| contain values in the Manufacturer Extensible Identifier (MEI) range: |
| (0xXXXX_0000 - 0xXXXX_00FF), where XXXX is the allowed MEI range |
| (0x0001 - 0xFFF1), these values SHALL be ignored. 2.The list SHALL NOT |
| contain any values in the Test Vendor or invalid range: (0x0000_0100 - |
| 0x0000_FFFF), (0xXXXX_0100 - 0xXXXX_FFFF) and (0xFFF1_0000 - |
| 0xFFFF_FFFF), where XXXX is the allowed MEI range (0x0001 - 0xFFF1)" |
| verification: | |
| ./chip-tool fixedlabel read generated-command-list 1 0 |
| |
| Verify "GeneratedCommandList" contains a list of supported commands, Also verify that the DUT response with an empty list (0 entries) if there is no generated command on the TH(Chip-tool) Log: |
| |
| [1651124266.980698][2527:2532] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_0040 Attribute 0x0000_FFF8 DataVersion: 3688229931 |
| [1651124266.980776][2527:2532] CHIP:TOO: GeneratedCommandList: 0 entries |
| [1651124266.980897][2527:2532] CHIP:EM: Sending Standalone Ack for MessageCounter:11345894 on exchange 5110i |
| cluster: "LogCommands" |
| command: "UserPrompt" |
| PICS: PICS_USER_PROMPT && FLABEL.S.Afff8 |
| arguments: |
| values: |
| - name: "message" |
| value: "Please enter 'y' for success" |
| - name: "expectedValue" |
| value: "y" |