| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| #include "LEDWidget.h" |
| #include "ColorFormat.h" |
| #include "led_strip.h" |
| |
| static const char * TAG = "LEDWidget"; |
| |
| void LEDWidget::Init(void) |
| { |
| mState = false; |
| mBrightness = UINT8_MAX; |
| |
| #if CONFIG_LED_TYPE_RMT |
| #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0) |
| led_strip_config_t strip_config = { |
| .strip_gpio_num = CONFIG_LED_GPIO, |
| .max_leds = 1, |
| }; |
| |
| led_strip_new_rmt_device(&strip_config, &mStrip); |
| #else |
| rmt_config_t config = RMT_DEFAULT_CONFIG_TX((gpio_num_t) CONFIG_LED_GPIO, (rmt_channel_t) CONFIG_LED_RMT_CHANNEL); |
| led_strip_config_t strip_config = LED_STRIP_DEFAULT_CONFIG(1, (led_strip_dev_t) config.channel); |
| |
| config.clk_div = 2; |
| rmt_config(&config); |
| rmt_driver_install(config.channel, 0, 0); |
| |
| mStrip = led_strip_new_rmt_ws2812(&strip_config); |
| #endif |
| mHue = 0; |
| mSaturation = 0; |
| #else |
| mGPIONum = (gpio_num_t) CONFIG_LED_GPIO; |
| ledc_timer_config_t ledc_timer = { |
| .speed_mode = LEDC_LOW_SPEED_MODE, // timer mode |
| .duty_resolution = LEDC_TIMER_8_BIT, // resolution of PWM duty |
| .timer_num = LEDC_TIMER_1, // timer index |
| .freq_hz = 5000, // frequency of PWM signal |
| .clk_cfg = LEDC_AUTO_CLK, // Auto select the source clock |
| }; |
| ledc_timer_config(&ledc_timer); |
| ledc_channel_config_t ledc_channel = { |
| .gpio_num = mGPIONum, |
| .speed_mode = LEDC_LOW_SPEED_MODE, |
| .channel = LEDC_CHANNEL_0, |
| .intr_type = LEDC_INTR_DISABLE, |
| .timer_sel = LEDC_TIMER_1, |
| .duty = 0, |
| .hpoint = 0, |
| }; |
| ledc_channel_config(&ledc_channel); |
| #endif // CONFIG_LED_TYPE_RMT |
| } |
| |
| void LEDWidget::Set(bool state) |
| { |
| ESP_LOGI(TAG, "Setting state to %d", state ? 1 : 0); |
| if (state == mState) |
| return; |
| |
| mState = state; |
| |
| DoSet(); |
| } |
| |
| void LEDWidget::Toggle() |
| { |
| ESP_LOGI(TAG, "Toggling state to %d", !mState); |
| mState = !mState; |
| |
| DoSet(); |
| } |
| |
| void LEDWidget::SetBrightness(uint8_t brightness) |
| { |
| ESP_LOGI(TAG, "Setting brightness to %d", brightness); |
| if (brightness == mBrightness) |
| return; |
| |
| mBrightness = brightness; |
| |
| DoSet(); |
| } |
| |
| uint8_t LEDWidget::GetLevel() |
| { |
| return this->mBrightness; |
| } |
| |
| bool LEDWidget::IsTurnedOn() |
| { |
| return this->mState; |
| } |
| |
| #if CONFIG_LED_TYPE_RMT |
| void LEDWidget::SetColor(uint8_t Hue, uint8_t Saturation) |
| { |
| if (Hue == mHue && Saturation == mSaturation) |
| return; |
| |
| mHue = Hue; |
| mSaturation = Saturation; |
| |
| DoSet(); |
| } |
| #endif // CONFIG_LED_TYPE_RMT |
| |
| void LEDWidget::DoSet(void) |
| { |
| uint8_t brightness = mState ? mBrightness : 0; |
| |
| #if CONFIG_LED_TYPE_RMT |
| if (mStrip) |
| { |
| HsvColor_t hsv = { mHue, mSaturation, brightness }; |
| RgbColor_t rgb = HsvToRgb(hsv); |
| #if ESP_IDF_VERSION >= ESP_IDF_VERSION_VAL(5, 0, 0) |
| led_strip_set_pixel(mStrip, 0, rgb.r, rgb.g, rgb.b); |
| led_strip_refresh(mStrip); |
| #else |
| mStrip->set_pixel(mStrip, 0, rgb.r, rgb.g, rgb.b); |
| mStrip->refresh(mStrip, 100); |
| #endif |
| } |
| #else |
| ESP_LOGI(TAG, "DoSet to GPIO number %d", mGPIONum); |
| if (mGPIONum < GPIO_NUM_MAX) |
| { |
| ledc_set_duty(LEDC_LOW_SPEED_MODE, LEDC_CHANNEL_0, brightness); |
| ledc_update_duty(LEDC_LOW_SPEED_MODE, LEDC_CHANNEL_0); |
| } |
| #endif // CONFIG_LED_TYPE_RMT |
| } |