| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.12. [TC-CADMIN-1.12] Open commissioning window on DUT twice using ECM |
| then BCM [DUT - Commissioner] |
| |
| PICS: |
| - CADMIN.C |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "DUT_CR1 starts a commissioning process with TH_CE" |
| PICS: CADMIN.C |
| verification: | |
| "1. Provision the device using your DUT controller (use above instructions) , |
| " |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM and |
| TH_CR3 Commissions with TH_CE" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On your first controller, open commissioning window using ECM |
| |
| Below is the example is using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| [1635874557.409509][4549:4554] CHIP:SC: Success status report received. Session was established |
| [1635874557.409553][4549:4554] CHIP:IN: New secure session created for device 0x0000000000000001, key 76!! |
| [1635874557.409649][4549:4554] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635874557.416929][4549:4554] CHIP:DMG: ICR moving to [AddingComm] |
| [1635874557.417092][4549:4554] CHIP:DMG: ICR moving to [AddedComma] |
| [1635874557.417215][4549:4554] CHIP:IN: Prepared encrypted message 0xaaaac5947d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 5541i with MessageCounter:0. |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| |
| |
| |
| On 3rd controller using chip tool connect using manual code |
| |
| ./chip-tool pairing code 1 35484132896 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM and |
| TH_CR2 Commissions with TH_CE" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On your first controller, open commissioning window using ECM |
| |
| Below is the example is using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| [1635874557.409509][4549:4554] CHIP:SC: Success status report received. Session was established |
| [1635874557.409553][4549:4554] CHIP:IN: New secure session created for device 0x0000000000000001, key 76!! |
| [1635874557.409649][4549:4554] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635874557.416929][4549:4554] CHIP:DMG: ICR moving to [AddingComm] |
| [1635874557.417092][4549:4554] CHIP:DMG: ICR moving to [AddedComma] |
| [1635874557.417215][4549:4554] CHIP:IN: Prepared encrypted message 0xaaaac5947d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 5541i with MessageCounter:0. |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| |
| |
| |
| On 2nd controller using chip tool connect using manual code |
| |
| ./chip-tool pairing code 1 35484132896 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On your first controller, open commissioning window using ECM |
| |
| Below is the example is using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| [1635874557.409509][4549:4554] CHIP:SC: Success status report received. Session was established |
| [1635874557.409553][4549:4554] CHIP:IN: New secure session created for device 0x0000000000000001, key 76!! |
| [1635874557.409649][4549:4554] CHIP:CTL: OpenCommissioningWindow for device ID 1 |
| [1635874557.416929][4549:4554] CHIP:DMG: ICR moving to [AddingComm] |
| [1635874557.417092][4549:4554] CHIP:DMG: ICR moving to [AddedComma] |
| [1635874557.417215][4549:4554] CHIP:IN: Prepared encrypted message 0xaaaac5947d10 to 0x0000000000000001 of type 0x8 and protocolId (0, 1) on exchange 5541i with MessageCounter:0. |
| [1635874557.417271][4549:4554] CHIP:IN: Sending encrypted msg 0xaaaac5947d10 with MessageCounter:0 to 0x0000000000000001 at monotonic time: 16129075 msec |
| [1635874557.417449][4549:4554] CHIP:DMG: ICR moving to [CommandSen] |
| [1635874557.417505][4549:4554] CHIP:CTL: Manual pairing code: [35484132896] |
| [1635874557.417577][4549:4554] CHIP:CTL: SetupQRCode: [MT:00000CQM00AT-F5A510] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 4, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller read window status |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| [1658838248.886555][9273:9278] CHIP:DMG: ReportDataMessage = |
| [1658838248.886599][9273:9278] CHIP:DMG: { |
| [1658838248.886634][9273:9278] CHIP:DMG: AttributeReportIBs = |
| [1658838248.886683][9273:9278] CHIP:DMG: [ |
| [1658838248.886722][9273:9278] CHIP:DMG: AttributeReportIB = |
| [1658838248.886774][9273:9278] CHIP:DMG: { |
| [1658838248.886816][9273:9278] CHIP:DMG: AttributeDataIB = |
| [1658838248.886872][9273:9278] CHIP:DMG: { |
| [1658838248.886925][9273:9278] CHIP:DMG: DataVersion = 0x906dac1f, |
| [1658838248.886981][9273:9278] CHIP:DMG: AttributePathIB = |
| [1658838248.887036][9273:9278] CHIP:DMG: { |
| [1658838248.887086][9273:9278] CHIP:DMG: Endpoint = 0x0, |
| [1658838248.887146][9273:9278] CHIP:DMG: Cluster = 0x3c, |
| [1658838248.887208][9273:9278] CHIP:DMG: Attribute = 0x0000_0000, |
| [1658838248.887256][9273:9278] CHIP:DMG: } |
| [1658838248.887316][9273:9278] CHIP:DMG: |
| [1658838248.887367][9273:9278] CHIP:DMG: Data = 1, |
| [1658838248.887417][9273:9278] CHIP:DMG: }, |
| [1658838248.887469][9273:9278] CHIP:DMG: |
| [1658838248.887514][9273:9278] CHIP:DMG: }, |
| [1658838248.887562][9273:9278] CHIP:DMG: |
| [1658838248.887597][9273:9278] CHIP:DMG: ], |
| [1658838248.887630][9273:9278] CHIP:DMG: |
| [1658838248.887658][9273:9278] CHIP:DMG: SuppressResponse = true, |
| [1658838248.887687][9273:9278] CHIP:DMG: InteractionModelRevision = 1 |
| [1658838248.887740][9273:9278] CHIP:DMG: } |
| [1658838248.887888][9273:9278] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2423106591 |
| [1658838248.887959][9273:9278] CHIP:TOO: WindowStatus: 1 |
| [1658838248.888038][9273:9278] CHIP:EM: Sending Standalone Ack for MessageCounter:253317720 on exchange 63644i |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that was set |
| in step 4, DUT_CR1 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using ECM" |
| PICS: CADMIN.C.C00.Tx |
| verification: | |
| On your first controller, open commissioning window using ECM before the timer expiry from the above step |
| |
| Below is the example is using chip tool as controller |
| ./chip-tool pairing open-commissioning-window 1 1 300 1000 3840 |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650527622.373450][15824:15829] CHIP:DMG: { |
| [1650527622.373531][15824:15829] CHIP:DMG: suppressResponse = false, |
| [1650527622.373628][15824:15829] CHIP:DMG: InvokeResponseIBs = |
| [1650527622.373734][15824:15829] CHIP:DMG: [ |
| [1650527622.373817][15824:15829] CHIP:DMG: InvokeResponseIB = |
| [1650527622.373913][15824:15829] CHIP:DMG: { |
| [1650527622.374001][15824:15829] CHIP:DMG: CommandStatusIB = |
| [1650527622.374087][15824:15829] CHIP:DMG: { |
| [1650527622.374182][15824:15829] CHIP:DMG: CommandPathIB = |
| [1650527622.374296][15824:15829] CHIP:DMG: { |
| [1650527622.374382][15824:15829] CHIP:DMG: EndpointId = 0x0, |
| [1650527622.374490][15824:15829] CHIP:DMG: ClusterId = 0x3c, |
| [1650527622.374593][15824:15829] CHIP:DMG: CommandId = 0x1, |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x1, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| [1650527622.375704][15824:15829] CHIP:DMG: }, |
| [1650527622.375786][15824:15829] CHIP:DMG: |
| [1650527622.375864][15824:15829] CHIP:DMG: ], |
| [1650527622.375940][15824:15829] CHIP:DMG: |
| [1650527622.376000][15824:15829] CHIP:DMG: InteractionModelRevision = 1 |
| [1650527622.376058][15824:15829] CHIP:DMG: }, |
| [1650527622.376202][15824:15829] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1650527622.376278][15824:15829] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01 |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that was |
| set in step 4" |
| verification: | |
| Wait for the expiration of PIXIT_COMM_WIN seconds |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to re-opens a commissioning window |
| with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds using |
| BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On your first controller, open commissioning window using BCM |
| |
| Below is the example when using chip tool as controller |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that is set |
| in step 8, DUT_CR1 sends command to TH_CE to read WindowStatus |
| attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller read window status |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| [1658838248.886555][9273:9278] CHIP:DMG: ReportDataMessage = |
| [1658838248.886599][9273:9278] CHIP:DMG: { |
| [1658838248.886634][9273:9278] CHIP:DMG: AttributeReportIBs = |
| [1658838248.886683][9273:9278] CHIP:DMG: [ |
| [1658838248.886722][9273:9278] CHIP:DMG: AttributeReportIB = |
| [1658838248.886774][9273:9278] CHIP:DMG: { |
| [1658838248.886816][9273:9278] CHIP:DMG: AttributeDataIB = |
| [1658838248.886872][9273:9278] CHIP:DMG: { |
| [1658838248.886925][9273:9278] CHIP:DMG: DataVersion = 0x906dac1f, |
| [1658838248.886981][9273:9278] CHIP:DMG: AttributePathIB = |
| [1658838248.887036][9273:9278] CHIP:DMG: { |
| [1658838248.887086][9273:9278] CHIP:DMG: Endpoint = 0x0, |
| [1658838248.887146][9273:9278] CHIP:DMG: Cluster = 0x3c, |
| [1658838248.887208][9273:9278] CHIP:DMG: Attribute = 0x0000_0000, |
| [1658838248.887256][9273:9278] CHIP:DMG: } |
| [1658838248.887316][9273:9278] CHIP:DMG: |
| [1658838248.887367][9273:9278] CHIP:DMG: Data = 1, |
| [1658838248.887417][9273:9278] CHIP:DMG: }, |
| [1658838248.887469][9273:9278] CHIP:DMG: |
| [1658838248.887514][9273:9278] CHIP:DMG: }, |
| [1658838248.887562][9273:9278] CHIP:DMG: |
| [1658838248.887597][9273:9278] CHIP:DMG: ], |
| [1658838248.887630][9273:9278] CHIP:DMG: |
| [1658838248.887658][9273:9278] CHIP:DMG: SuppressResponse = true, |
| [1658838248.887687][9273:9278] CHIP:DMG: InteractionModelRevision = 1 |
| [1658838248.887740][9273:9278] CHIP:DMG: } |
| [1658838248.887888][9273:9278] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2423106591 |
| [1658838248.887959][9273:9278] CHIP:TOO: WindowStatus: 1 |
| [1658838248.888038][9273:9278] CHIP:EM: Sending Standalone Ack for MessageCounter:253317720 on exchange 63644i |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that was set |
| in step 8, TH_CR3 sends command to TH_CE to open a 2nd commissioning |
| window with a commissioning timeout of PIXIT.CADMIN.CwDuration seconds |
| using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On third controller open commissioning window verify status code 1 |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 3 0 --timedInteractionTimeoutMs 1000 |
| |
| [1658838344.191922][9291:9296] CHIP:DMG: InvokeResponseMessage = |
| [1658838344.191947][9291:9296] CHIP:DMG: { |
| [1658838344.191971][9291:9296] CHIP:DMG: suppressResponse = false, |
| [1658838344.192003][9291:9296] CHIP:DMG: InvokeResponseIBs = |
| [1658838344.192035][9291:9296] CHIP:DMG: [ |
| [1658838344.192059][9291:9296] CHIP:DMG: InvokeResponseIB = |
| [1658838344.192091][9291:9296] CHIP:DMG: { |
| [1658838344.192116][9291:9296] CHIP:DMG: CommandStatusIB = |
| [1658838344.192149][9291:9296] CHIP:DMG: { |
| [1658838344.192181][9291:9296] CHIP:DMG: CommandPathIB = |
| [1658838344.192212][9291:9296] CHIP:DMG: { |
| [1658838344.192251][9291:9296] CHIP:DMG: EndpointId = 0x0, |
| [1658838344.192290][9291:9296] CHIP:DMG: ClusterId = 0x3c, |
| [1658838344.192328][9291:9296] CHIP:DMG: CommandId = 0x1, |
| [1658838344.192364][9291:9296] CHIP:DMG: }, |
| [1658838344.192401][9291:9296] CHIP:DMG: |
| [1658838344.192430][9291:9296] CHIP:DMG: StatusIB = |
| [1658838344.192461][9291:9296] CHIP:DMG: { |
| [1658838344.192500][9291:9296] CHIP:DMG: status = 0x01 (FAILURE), |
| [1658838344.192538][9291:9296] CHIP:DMG: cluster-status = 0x1, |
| [1658838344.192574][9291:9296] CHIP:DMG: }, |
| [1658838344.192611][9291:9296] CHIP:DMG: |
| [1658838344.192640][9291:9296] CHIP:DMG: }, |
| [1658838344.192673][9291:9296] CHIP:DMG: |
| [1658838344.192698][9291:9296] CHIP:DMG: }, |
| [1658838344.192728][9291:9296] CHIP:DMG: |
| [1658838344.192752][9291:9296] CHIP:DMG: ], |
| [1658838344.192782][9291:9296] CHIP:DMG: |
| [1658838344.192805][9291:9296] CHIP:DMG: InteractionModelRevision = 1 |
| [1658838344.192828][9291:9296] CHIP:DMG: }, |
| [1658838344.192887][9291:9296] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1658838344.192922][9291:9296] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01 |
| disabled: true |
| |
| - label: |
| "Wait for the expiration of PIXIT.CADMIN.CwDuration seconds that was |
| set in step 8" |
| verification: | |
| Wait for the expiration of PIXIT_COMM_WIN seconds |
| disabled: true |
| |
| - label: |
| "DUT_CR1 sends command to TH_CE to open a commissioning window with a |
| commissioning timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On your first controller, open commissioning window using BCM |
| |
| Below is the example when using chip tool as controller |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650278416.248379][11064:11069] CHIP:DMG: { |
| [1650278416.248436][11064:11069] CHIP:DMG: suppressResponse = false, |
| [1650278416.248495][11064:11069] CHIP:DMG: InvokeResponseIBs = |
| [1650278416.248570][11064:11069] CHIP:DMG: [ |
| [1650278416.248630][11064:11069] CHIP:DMG: InvokeResponseIB = |
| [1650278416.248718][11064:11069] CHIP:DMG: { |
| [1650278416.248783][11064:11069] CHIP:DMG: CommandStatusIB = |
| [1650278416.248860][11064:11069] CHIP:DMG: { |
| [1650278416.248931][11064:11069] CHIP:DMG: CommandPathIB = |
| [1650278416.249011][11064:11069] CHIP:DMG: { |
| [1650278416.249100][11064:11069] CHIP:DMG: EndpointId = 0x0, |
| [1650278416.249186][11064:11069] CHIP:DMG: ClusterId = 0x3c, |
| [1650278416.249268][11064:11069] CHIP:DMG: CommandId = 0x1, |
| [1650278416.249347][11064:11069] CHIP:DMG: }, |
| [1650278416.249430][11064:11069] CHIP:DMG: |
| [1650278416.249501][11064:11069] CHIP:DMG: StatusIB = |
| [1650278416.249581][11064:11069] CHIP:DMG: { |
| [1650278416.249664][11064:11069] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1650278416.249738][11064:11069] CHIP:DMG: }, |
| [1650278416.249823][11064:11069] CHIP:DMG: |
| [1650278416.249889][11064:11069] CHIP:DMG: }, |
| [1650278416.249969][11064:11069] CHIP:DMG: |
| [1650278416.250035][11064:11069] CHIP:DMG: }, |
| [1650278416.250113][11064:11069] CHIP:DMG: |
| [1650278416.250169][11064:11069] CHIP:DMG: ], |
| [1650278416.250241][11064:11069] CHIP:DMG: |
| [1650278416.250298][11064:11069] CHIP:DMG: InteractionModelRevision = 1 |
| [1650278416.250355][11064:11069] CHIP:DMG: }, |
| [1650278416.250535][11064:11069] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1650278416.250634][11064:11069] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration seconds that was set |
| in step 12, TH_CR2 sends command to open a second commissioning window |
| on TH_CE using a commissioning timeout of PIXIT.CADMIN.CwDuration |
| seconds using BCM" |
| PICS: CADMIN.C.C01.Tx |
| verification: | |
| On the 2nd controller using chip tool, open commissioning window using BCM before the timer expiry from above step |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 2 0 --timedInteractionTimeoutMs 1000 |
| |
| |
| |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1650527622.373450][15824:15829] CHIP:DMG: { |
| [1650527622.373531][15824:15829] CHIP:DMG: suppressResponse = false, |
| [1650527622.373628][15824:15829] CHIP:DMG: InvokeResponseIBs = |
| [1650527622.373734][15824:15829] CHIP:DMG: [ |
| [1650527622.373817][15824:15829] CHIP:DMG: InvokeResponseIB = |
| [1650527622.373913][15824:15829] CHIP:DMG: { |
| [1650527622.374001][15824:15829] CHIP:DMG: CommandStatusIB = |
| [1650527622.374087][15824:15829] CHIP:DMG: { |
| [1650527622.374182][15824:15829] CHIP:DMG: CommandPathIB = |
| [1650527622.374296][15824:15829] CHIP:DMG: { |
| [1650527622.374382][15824:15829] CHIP:DMG: EndpointId = 0x0, |
| [1650527622.374490][15824:15829] CHIP:DMG: ClusterId = 0x3c, |
| [1650527622.374593][15824:15829] CHIP:DMG: CommandId = 0x1, |
| [1650527622.374682][15824:15829] CHIP:DMG: }, |
| [1650527622.374799][15824:15829] CHIP:DMG: |
| [1650527622.374896][15824:15829] CHIP:DMG: StatusIB = |
| [1650527622.374979][15824:15829] CHIP:DMG: { |
| [1650527622.375086][15824:15829] CHIP:DMG: status = 0x01 (FAILURE), |
| [1650527622.375236][15824:15829] CHIP:DMG: cluster-status = 0x1, |
| [1650527622.375320][15824:15829] CHIP:DMG: }, |
| [1650527622.375426][15824:15829] CHIP:DMG: |
| [1650527622.375527][15824:15829] CHIP:DMG: }, |
| [1650527622.375616][15824:15829] CHIP:DMG: |
| [1650527622.375704][15824:15829] CHIP:DMG: }, |
| [1650527622.375786][15824:15829] CHIP:DMG: |
| [1650527622.375864][15824:15829] CHIP:DMG: ], |
| [1650527622.375940][15824:15829] CHIP:DMG: |
| [1650527622.376000][15824:15829] CHIP:DMG: InteractionModelRevision = 1 |
| [1650527622.376058][15824:15829] CHIP:DMG: }, |
| [1650527622.376202][15824:15829] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x1 |
| [1650527622.376278][15824:15829] CHIP:TOO: Error: IM Error 0x00000601: Cluster-specific error: 0x01 |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read WindowStatus attribute" |
| PICS: CADMIN.C.A0000 |
| verification: | |
| On first controller read window status |
| |
| ./chip-tool administratorcommissioning read window-status 1 0 |
| |
| |
| [1658838248.887888][9273:9278] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0000 DataVersion: 2423106591 |
| [1658838248.887959][9273:9278] CHIP:TOO: WindowStatus: 1 |
| [1658838248.888038][9273:9278] CHIP:EM: Sending Standalone Ack for MessageCounter:253317720 on exchange 63644i |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminFabricIndex attribute" |
| PICS: CADMIN.C.A0001 |
| verification: | |
| On first controller read AdminFabricIndex |
| |
| ./chip-tool administratorcommissioning read admin-fabric-index 1 0 |
| |
| [1658838491.852418][9309:9314] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0001 DataVersion: 2423106591 |
| [1658838491.852516][9309:9314] CHIP:TOO: AdminFabricIndex: 1 |
| [1658838491.852595][9309:9314] CHIP:EM: Sending Standalone Ack for MessageCounter:72459812 on exchange 35132i |
| disabled: true |
| |
| - label: "DUT_CR1 sends command to TH_CE to read AdminVendorId attribute" |
| PICS: CADMIN.C.A0002 |
| verification: | |
| On first controller read AdminVendorId |
| |
| ./chip-tool administratorcommissioning read admin-vendor-id 1 0 |
| |
| [1658838521.588942][9317:9322] CHIP:TOO: Endpoint: 0 Cluster: 0x0000_003C Attribute 0x0000_0002 DataVersion: 2423106591 |
| [1658838521.589005][9317:9322] CHIP:TOO: AdminVendorId: 0 |
| [1658838521.589079][9317:9322] CHIP:EM: Sending Standalone Ack for MessageCounter:217165763 on exchange 55683i |
| disabled: true |