| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.20. [TC-CADMIN-1.20] max number of Commissioned Fabrics and |
| SupportedFabrics rollover using BCM [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic" |
| endpoint: 0 |
| |
| tests: |
| - label: "Reset DUT_CE to factory defaults" |
| verification: | |
| verification step to be updated. |
| disabled: true |
| |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| "1. Provision the device using 1st controller chip tool(use above instructions) , |
| " |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a commissioning window on DUT_CE using a commissioning |
| timeout of PIXIT.CADMIN.CwDuration seconds using BCM" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On 1st controller chip tool, open commissioning window |
| |
| Below is the example when using chip tool as controller |
| |
| ./chip-tool administratorcommissioning open-basic-commissioning-window 500 1 0 --timedInteractionTimeoutMs 1000 |
| |
| CHIP:DMG: InvokeResponseMessage = |
| [1649756654.928453][3385:3390] CHIP:DMG: { |
| [1649756654.928511][3385:3390] CHIP:DMG: suppressResponse = false, |
| [1649756654.928571][3385:3390] CHIP:DMG: InvokeResponseIBs = |
| [1649756654.928647][3385:3390] CHIP:DMG: [ |
| [1649756654.928708][3385:3390] CHIP:DMG: InvokeResponseIB = |
| [1649756654.928794][3385:3390] CHIP:DMG: { |
| [1649756654.928864][3385:3390] CHIP:DMG: CommandStatusIB = |
| [1649756654.928948][3385:3390] CHIP:DMG: { |
| [1649756654.929021][3385:3390] CHIP:DMG: CommandPathIB = |
| [1649756654.929109][3385:3390] CHIP:DMG: { |
| [1649756654.929191][3385:3390] CHIP:DMG: EndpointId = 0x0, |
| [1649756654.929284][3385:3390] CHIP:DMG: ClusterId = 0x3c, |
| [1649756654.929376][3385:3390] CHIP:DMG: CommandId = 0x1, |
| [1649756654.929459][3385:3390] CHIP:DMG: }, |
| [1649756654.929551][3385:3390] CHIP:DMG: |
| [1649756654.929632][3385:3390] CHIP:DMG: StatusIB = |
| [1649756654.929720][3385:3390] CHIP:DMG: { |
| [1649756654.929804][3385:3390] CHIP:DMG: status = 0x00 (SUCCESS), |
| [1649756654.929878][3385:3390] CHIP:DMG: }, |
| [1649756654.929946][3385:3390] CHIP:DMG: |
| [1649756654.930017][3385:3390] CHIP:DMG: }, |
| [1649756654.930109][3385:3390] CHIP:DMG: |
| [1649756654.930176][3385:3390] CHIP:DMG: }, |
| [1649756654.930256][3385:3390] CHIP:DMG: |
| [1649756654.930314][3385:3390] CHIP:DMG: ], |
| [1649756654.930389][3385:3390] CHIP:DMG: |
| [1649756654.930448][3385:3390] CHIP:DMG: InteractionModelRevision = 1 |
| [1649756654.930555][3385:3390] CHIP:DMG: }, |
| [1649756654.930703][3385:3390] CHIP:DMG: Received Command Response Status for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0001 Status=0x0 |
| [1649756654.930801][3385:3390] CHIP:DMG: ICR moving to [AwaitingDe] |
| disabled: true |
| |
| - label: "THn starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| On nth controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| Verify you got below message |
| Device commissioning completed with success |
| disabled: true |
| |
| - label: |
| "Repeat Step 3 and Step 4 an additional (SupportedFabrics - 2) times |
| to reach an index value of SupportedFabrics on DUT_CE" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| Repeat step 3 until CommissionedFabrics=SupportedFabrics |
| disabled: true |
| |
| - label: |
| "THn starts a commissioning process and opens a commissioning window |
| with DUT_CE" |
| PICS: CADMIN.S.C01.Rsp |
| verification: | |
| On nth controller using chip tool connect to the accessory |
| |
| |
| ./chip-tool pairing onnetwork 1 20202021 |
| |
| CHIP:DMG: Received Command Response Data, Endpoint=0 Cluster=0x0000_003E Command=0x0000_0008 |
| [1649756670.402192][10794:10799] CHIP:CTL: Device returned status 5 on receiving the NOC |
| [1649756670.402221][10794:10799] CHIP:CTL: Add NOC failed with error ../../third_party/connectedhomeip/src/controller/CHIPDeviceController.cpp:1110: CHIP Error 0x0000000B: No memory |
| [1649756670.402241][10794:10799] CHIP:CTL: Failed to perform commissioning step 12 |
| disabled: true |
| |
| - label: "TH_CR1 removes FabricIndex1" |
| PICS: OPCREDS.S.C0a.Rsp |
| verification: | |
| on 1st controller using chip tool, remove fabric with FabricIndex=1 |
| |
| ./chip-tool operationalcredentials remove-fabric 1 1 0 |
| disabled: true |