| /******************************************************************************* |
| * File Name: cycfg_pins.h |
| * |
| * Description: |
| * Pin configuration |
| * This file was automatically generated and should not be modified. |
| * Tools Package 2.3.0.4276 |
| * 30739A0 CSP |
| * personalities 1.0.0.31 |
| * udd 3.0.0.1636 |
| * |
| ******************************************************************************** |
| * Copyright 2022 Cypress Semiconductor Corporation |
| * SPDX-License-Identifier: Apache-2.0 |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| ********************************************************************************/ |
| |
| #if !defined(CYCFG_PINS_H) |
| #define CYCFG_PINS_H |
| |
| #include "cycfg_notices.h" |
| #include "cycfg_routing.h" |
| #include "wiced_platform.h" |
| |
| #if defined(__cplusplus) |
| extern "C" { |
| #endif |
| |
| #define amplifiers_0_ENABLED 1U |
| #define bluetooth_0_ENABLED 1U |
| #define ioss_0_ENABLED 1U |
| #define WICED_GET_PIN_FOR_LED(idx) (*(platform_led[(idx)].gpio)) |
| #define WICED_GET_PIN_FOR_BUTTON(idx) (*(platform_button[(idx)].gpio)) |
| #define WICED_GET_PIN_FOR_IO(idx) (*(platform_gpio[(idx)].gpio)) |
| #define BUTTON_USER_ENABLED 1U |
| #define BUTTON_USER WICED_P00 |
| #define PUART_TXD_ENABLED 1U |
| #define PUART_TXD WICED_P10 |
| //#define GPIO3_ENABLED 1U |
| //#define GPIO3 WICED_P16 |
| #define RX_PU_ENABLED 1U |
| #define RX_PU WICED_P17 |
| //#define GPIO4_ENABLED 1U |
| //#define GPIO4 WICED_P25 |
| #define TX_PU_ENABLED 1U |
| #define TX_PU WICED_P26 |
| //#define GPIO5_ENABLED 1U |
| //#define GPIO5 WICED_P28 |
| //#define GPIO6_ENABLED 1U |
| //#define GPIO6 WICED_P29 |
| #define DEBUG_UART_TXD_ENABLED 1U |
| #define DEBUG_UART_TXD WICED_P33 |
| #define LED1_ENABLED 1U |
| #define LED1 WICED_P34 |
| #define LED2_ENABLED 1U |
| #define LED2 WICED_P38 |
| #define PWM0_ENABLED 1U |
| #define PWM0 WICED_P04 |
| #define PUART_RXD_ENABLED 1U |
| #define PUART_RXD WICED_P06 |
| #define GPIO2_ENABLED 1U |
| #define GPIO2 WICED_P07 |
| #define pwm_0_ENABLED 1U |
| #define spi_1_ENABLED 1U |
| #define uart_1_ENABLED 1U |
| |
| extern const wiced_platform_gpio_t platform_gpio_pins[]; |
| extern const size_t platform_gpio_pin_count; |
| extern const wiced_platform_led_config_t platform_led[]; |
| extern const size_t led_count; |
| extern const wiced_platform_button_config_t platform_button[]; |
| extern const size_t button_count; |
| extern const wiced_platform_gpio_config_t platform_gpio[]; |
| extern const size_t gpio_count; |
| |
| #if defined(__cplusplus) |
| } |
| #endif |
| |
| #endif /* CYCFG_PINS_H */ |
