| /******************************************************************************* |
| * (c) 2020, Cypress Semiconductor Corporation. All rights reserved. |
| ******************************************************************************* |
| * This software, including source code, documentation and related materials |
| * ("Software"), is owned by Cypress Semiconductor Corporation or one of its |
| * subsidiaries ("Cypress") and is protected by and subject to worldwide patent |
| * protection (United States and foreign), United States copyright laws and |
| * international treaty provisions. Therefore, you may use this Software only |
| * as provided in the license agreement accompanying the software package from |
| * which you obtained this Software ("EULA"). |
| * |
| * If no EULA applies, Cypress hereby grants you a personal, non-exclusive, |
| * non-transferable license to copy, modify, and compile the Software source |
| * code solely for use in connection with Cypress's integrated circuit products. |
| * Any reproduction, modification, translation, compilation, or representation |
| * of this Software except as specified above is prohibited without the express |
| * written permission of Cypress. |
| * |
| * Disclaimer: THIS SOFTWARE IS PROVIDED AS-IS, WITH NO WARRANTY OF ANY KIND, |
| * EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, NONINFRINGEMENT, IMPLIED |
| * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. Cypress |
| * reserves the right to make changes to the Software without notice. Cypress |
| * does not assume any liability arising out of the application or use of the |
| * Software or any product or circuit described in the Software. Cypress does |
| * not authorize its products for use in any products where a malfunction or |
| * failure of the Cypress product may reasonably be expected to result in |
| * significant property damage, injury or death ("High Risk Product"). By |
| * including Cypress's product in a High Risk Product, the manufacturer of such |
| * system or application assumes all risk of such use and in doing so agrees to |
| * indemnify Cypress against all liability. |
| *******************************************************************************/ |
| |
| /******************************************************************************* |
| * File Name: cycfg_bt_settings.c |
| * Version: 2.40.0.4650 |
| * |
| * Description: |
| * Runtime Bluetooth stack configuration parameters. |
| * |
| *******************************************************************************/ |
| #ifdef __cplusplus |
| extern "C" { |
| #endif |
| |
| #include "cycfg_bt_settings.h" |
| #include "cycfg_gap.h" |
| |
| #include "wiced_bt_ble.h" |
| #include "wiced_bt_cfg.h" |
| #include "wiced_bt_dev.h" |
| #include "wiced_bt_gatt.h" |
| |
| #if !defined(WICED_BTSTACK_VERSION_MAJOR) |
| #define WICED_BTSTACK_VERSION_MAJOR (2) |
| #endif |
| |
| /***************************************************************************** |
| * wiced_bt core stack configuration |
| ****************************************************************************/ |
| #if (WICED_BTSTACK_VERSION_MAJOR >= 3) |
| /* BLE scan settings */ |
| const wiced_bt_cfg_ble_scan_settings_t cy_bt_cfg_scan_settings = { |
| .scan_mode = |
| CY_BT_SCAN_MODE, /* BLE scan mode (BTM_BLE_SCAN_MODE_PASSIVE, BTM_BLE_SCAN_MODE_ACTIVE, or BTM_BLE_SCAN_MODE_NONE) */ |
| |
| /* Advertisement scan configuration */ |
| .high_duty_scan_interval = CY_BT_HIGH_DUTY_SCAN_INTERVAL, /* High duty scan interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_scan_window = CY_BT_HIGH_DUTY_SCAN_WINDOW, /* High duty scan window (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_scan_duration = CY_BT_HIGH_DUTY_SCAN_DURATION, /* High duty scan duration in seconds (0 for infinite) */ |
| |
| .low_duty_scan_interval = CY_BT_LOW_DUTY_SCAN_INTERVAL, /* Low duty scan interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_scan_window = CY_BT_LOW_DUTY_SCAN_WINDOW, /* Low duty scan window (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_scan_duration = CY_BT_LOW_DUTY_SCAN_DURATION, /* Low duty scan duration in seconds (0 for infinite) */ |
| |
| /* Connection scan configuration */ |
| .high_duty_conn_scan_interval = |
| CY_BT_HIGH_DUTY_CONN_SCAN_INTERVAL, /* High duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_conn_scan_window = |
| CY_BT_HIGH_DUTY_CONN_SCAN_WINDOW, /* High duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_conn_duration = |
| CY_BT_HIGH_DUTY_CONN_SCAN_DURATION, /* High duty cycle connection duration in seconds (0 for infinite) */ |
| |
| .low_duty_conn_scan_interval = |
| CY_BT_LOW_DUTY_CONN_SCAN_INTERVAL, /* Low duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_conn_scan_window = |
| CY_BT_LOW_DUTY_CONN_SCAN_WINDOW, /* Low duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_conn_duration = |
| CY_BT_LOW_DUTY_CONN_SCAN_DURATION, /* Low duty cycle connection duration in seconds (0 for infinite) */ |
| |
| /* Connection configuration */ |
| .conn_min_interval = CY_BT_CONN_MIN_INTERVAL, /* Minimum connection interval (in slots (1 slot = 1.25 ms)) */ |
| .conn_max_interval = CY_BT_CONN_MAX_INTERVAL, /* Maximum connection interval (in slots (1 slot = 1.25 ms)) */ |
| .conn_latency = CY_BT_CONN_LATENCY, /* Connection latency */ |
| .conn_supervision_timeout = CY_BT_CONN_SUPERVISION_TIMEOUT, /* Connection link supervision timeout (in 10 ms) */ |
| }; |
| |
| /* BLE advertisement settings */ |
| const wiced_bt_cfg_ble_advert_settings_t cy_bt_cfg_adv_settings = { |
| .channel_map = CY_BT_CHANNEL_MAP, /* Advertising channel map (mask of BTM_BLE_ADVERT_CHNL_37, BTM_BLE_ADVERT_CHNL_38, |
| BTM_BLE_ADVERT_CHNL_39) */ |
| |
| .high_duty_min_interval = CY_BT_HIGH_DUTY_ADV_MIN_INTERVAL, /* High duty undirected connectable minimum advertising interval (in |
| slots (1 slot = 0.625 ms)) */ |
| .high_duty_max_interval = CY_BT_HIGH_DUTY_ADV_MAX_INTERVAL, /* High duty undirected connectable maximum advertising interval (in |
| slots (1 slot = 0.625 ms)) */ |
| .high_duty_duration = |
| CY_BT_HIGH_DUTY_ADV_DURATION, /* High duty undirected connectable advertising duration in seconds (0 for infinite) */ |
| |
| .low_duty_min_interval = CY_BT_LOW_DUTY_ADV_MIN_INTERVAL, /* Low duty undirected connectable minimum advertising interval (in |
| slots (1 slot = 0.625 ms)) */ |
| .low_duty_max_interval = CY_BT_LOW_DUTY_ADV_MAX_INTERVAL, /* Low duty undirected connectable maximum advertising interval (in |
| slots (1 slot = 0.625 ms)) */ |
| .low_duty_duration = |
| CY_BT_LOW_DUTY_ADV_DURATION, /* Low duty undirected connectable advertising duration in seconds (0 for infinite) */ |
| |
| .high_duty_directed_min_interval = |
| CY_BT_HIGH_DUTY_DIRECTED_ADV_MIN_INTERVAL, /* High duty directed connectable minimum advertising interval (in slots (1 slot |
| = 0.625 ms)) */ |
| .high_duty_directed_max_interval = |
| CY_BT_HIGH_DUTY_DIRECTED_ADV_MAX_INTERVAL, /* High duty directed connectable maximum advertising interval (in slots (1 slot |
| = 0.625 ms)) */ |
| |
| .low_duty_directed_min_interval = CY_BT_LOW_DUTY_DIRECTED_ADV_MIN_INTERVAL, /* Low duty directed connectable minimum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_directed_max_interval = CY_BT_LOW_DUTY_DIRECTED_ADV_MAX_INTERVAL, /* Low duty directed connectable maximum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_directed_duration = |
| CY_BT_LOW_DUTY_DIRECTED_ADV_DURATION, /* Low duty directed connectable advertising duration in seconds (0 for infinite) */ |
| |
| .high_duty_nonconn_min_interval = CY_BT_HIGH_DUTY_NONCONN_ADV_MIN_INTERVAL, /* High duty non-connectable minimum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_nonconn_max_interval = CY_BT_HIGH_DUTY_NONCONN_ADV_MAX_INTERVAL, /* High duty non-connectable maximum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_nonconn_duration = |
| CY_BT_HIGH_DUTY_NONCONN_ADV_DURATION, /* High duty non-connectable advertising duration in seconds (0 for infinite) */ |
| |
| .low_duty_nonconn_min_interval = CY_BT_LOW_DUTY_NONCONN_ADV_MIN_INTERVAL, /* Low duty non-connectable minimum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_nonconn_max_interval = CY_BT_LOW_DUTY_NONCONN_ADV_MAX_INTERVAL, /* Low duty non-connectable maximum advertising |
| interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_nonconn_duration = |
| CY_BT_LOW_DUTY_NONCONN_ADV_DURATION /* Low duty non-connectable advertising duration in seconds (0 for infinite) */ |
| }; |
| |
| /* BLE configuration settings */ |
| const wiced_bt_cfg_ble_t cy_bt_cfg_ble = { |
| .ble_max_simultaneous_links = |
| (CY_BT_CLIENT_MAX_LINKS + |
| CY_BT_SERVER_MAX_LINKS), /* Max number for simultaneous connections for a layer, profile, protocol */ |
| .ble_max_rx_pdu_size = CY_BT_L2CAP_MTU_SIZE, /* Maximum size allowed for any received L2CAP PDU |
| * Minimum value - 65 (to support SM) |
| * Maximum GATT MTU over legacy bearers shall be set to <= this value |
| * Maximum MPS for EATT channels shall be set to <= this value */ |
| .appearance = CY_BT_APPEARANCE, /* GATT appearance (see gatt_appearance_e) */ |
| .rpa_refresh_timeout = CY_BT_RPA_TIMEOUT, /* Interval of random address refreshing - secs */ |
| .host_addr_resolution_db_size = 5, /* LE Address Resolution DB settings - effective only for pre 4.2 controller */ |
| .p_ble_scan_cfg = &cy_bt_cfg_scan_settings, /* BLE scan settings */ |
| .p_ble_advert_cfg = &cy_bt_cfg_adv_settings, /* BLE advertisement settings */ |
| .default_ble_power_level = CY_BT_TX_POWER, /* Default LE power level, Refer lm_TxPwrTable table for the power range */ |
| }; |
| |
| /* GATT settings */ |
| const wiced_bt_cfg_gatt_t cy_bt_cfg_gatt = { |
| .max_db_service_modules = 0, /* Maximum number of service modules in the DB*/ |
| .max_eatt_bearers = 0, /* Maximum number of allowed gatt bearers */ |
| }; |
| |
| /* Application-managed L2CAP protocol configuration */ |
| const wiced_bt_cfg_l2cap_application_t cy_bt_cfg_l2cap = { |
| .max_app_l2cap_psms = CY_BT_L2CAP_MAX_LE_PSM, /* Maximum number of application-managed PSMs */ |
| .max_app_l2cap_channels = CY_BT_L2CAP_MAX_LE_CHANNELS, /* Maximum number of application-managed channels */ |
| .max_app_l2cap_le_fixed_channels = 0, /* Maximum number of application-managed fixed channels supported */ |
| }; |
| |
| /* Bluetooth stack configuration */ |
| const wiced_bt_cfg_settings_t wiced_bt_cfg_settings = { |
| .device_name = (uint8_t *) app_gap_device_name, /* Local device name (NULL terminated) */ |
| .security_required = CY_BT_SECURITY_LEVEL, /* BTM_SEC_BEST_EFFORT is recommended choice for most applications, |
| * to connect to the widest range of devices. Allows stack to choose |
| * the highest level of security possible between the two devices */ |
| .p_ble_cfg = &cy_bt_cfg_ble, /* BLE related configuration */ |
| .p_gatt_cfg = &cy_bt_cfg_gatt, /* GATT settings */ |
| .p_l2cap_app_cfg = &cy_bt_cfg_l2cap, /* Application-managed L2CAP protocol configuration */ |
| }; |
| #else |
| /* Bluetooth stack configuration */ |
| const wiced_bt_cfg_settings_t wiced_bt_cfg_settings = |
| { |
| .device_name = (uint8_t*)app_gap_device_name, /* Local device name (NULL terminated) */ |
| .device_class = {0x00, 0x00, 0x00}, /* Local device class */ |
| .security_requirement_mask = BTM_SEC_NONE, /* Security requirements mask (BTM_SEC_NONE, or combination of BTM_SEC_IN_AUTHENTICATE, BTM_SEC_OUT_AUTHENTICATE, BTM_SEC_ENCRYPT (see #wiced_bt_sec_level_e)) */ |
| |
| .max_simultaneous_links = (CY_BT_CLIENT_MAX_LINKS + CY_BT_SERVER_MAX_LINKS), /* Maximum number simultaneous links to different devices */ |
| |
| /* BLE scan settings */ |
| .ble_scan_cfg = |
| { |
| .scan_mode = CY_BT_SCAN_MODE, /* BLE scan mode (BTM_BLE_SCAN_MODE_PASSIVE, BTM_BLE_SCAN_MODE_ACTIVE, or BTM_BLE_SCAN_MODE_NONE) */ |
| |
| /* Advertisement scan configuration */ |
| .high_duty_scan_interval = CY_BT_HIGH_DUTY_SCAN_INTERVAL, /* High duty scan interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_scan_window = CY_BT_HIGH_DUTY_SCAN_WINDOW, /* High duty scan window (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_scan_duration = CY_BT_HIGH_DUTY_SCAN_DURATION, /* High duty scan duration in seconds (0 for infinite) */ |
| |
| .low_duty_scan_interval = CY_BT_LOW_DUTY_SCAN_INTERVAL, /* Low duty scan interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_scan_window = CY_BT_LOW_DUTY_SCAN_WINDOW, /* Low duty scan window (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_scan_duration = CY_BT_LOW_DUTY_SCAN_DURATION, /* Low duty scan duration in seconds (0 for infinite) */ |
| |
| /* Connection scan configuration */ |
| .high_duty_conn_scan_interval = CY_BT_HIGH_DUTY_CONN_SCAN_INTERVAL, /* High duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_conn_scan_window = CY_BT_HIGH_DUTY_CONN_SCAN_WINDOW, /* High duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_conn_duration = CY_BT_HIGH_DUTY_CONN_SCAN_DURATION, /* High duty cycle connection duration in seconds (0 for infinite) */ |
| |
| .low_duty_conn_scan_interval = CY_BT_LOW_DUTY_CONN_SCAN_INTERVAL, /* Low duty cycle connection scan interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_conn_scan_window = CY_BT_LOW_DUTY_CONN_SCAN_WINDOW, /* Low duty cycle connection scan window (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_conn_duration = CY_BT_LOW_DUTY_CONN_SCAN_DURATION, /* Low duty cycle connection duration in seconds (0 for infinite) */ |
| |
| /* Connection configuration */ |
| .conn_min_interval = CY_BT_CONN_MIN_INTERVAL, /* Minimum connection interval (in slots (1 slot = 1.25 ms)) */ |
| .conn_max_interval = CY_BT_CONN_MAX_INTERVAL, /* Maximum connection interval (in slots (1 slot = 1.25 ms)) */ |
| .conn_latency = CY_BT_CONN_LATENCY, /* Connection latency */ |
| .conn_supervision_timeout = CY_BT_CONN_SUPERVISION_TIMEOUT, /* Connection link supervision timeout (in 10 ms) */ |
| }, |
| |
| /* BLE advertisement settings */ |
| .ble_advert_cfg = |
| { |
| .channel_map = CY_BT_CHANNEL_MAP, /* Advertising channel map (mask of BTM_BLE_ADVERT_CHNL_37, BTM_BLE_ADVERT_CHNL_38, BTM_BLE_ADVERT_CHNL_39) */ |
| |
| .high_duty_min_interval = CY_BT_HIGH_DUTY_ADV_MIN_INTERVAL, /* High duty undirected connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_max_interval = CY_BT_HIGH_DUTY_ADV_MAX_INTERVAL, /* High duty undirected connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_duration = CY_BT_HIGH_DUTY_ADV_DURATION, /* High duty undirected connectable advertising duration in seconds (0 for infinite) */ |
| |
| .low_duty_min_interval = CY_BT_LOW_DUTY_ADV_MIN_INTERVAL, /* Low duty undirected connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_max_interval = CY_BT_LOW_DUTY_ADV_MAX_INTERVAL, /* Low duty undirected connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_duration = CY_BT_LOW_DUTY_ADV_DURATION, /* Low duty undirected connectable advertising duration in seconds (0 for infinite) */ |
| |
| .high_duty_directed_min_interval = CY_BT_HIGH_DUTY_DIRECTED_ADV_MIN_INTERVAL, /* High duty directed connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_directed_max_interval = CY_BT_HIGH_DUTY_DIRECTED_ADV_MAX_INTERVAL, /* High duty directed connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| |
| .low_duty_directed_min_interval = CY_BT_LOW_DUTY_DIRECTED_ADV_MIN_INTERVAL, /* Low duty directed connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_directed_max_interval = CY_BT_LOW_DUTY_DIRECTED_ADV_MAX_INTERVAL, /* Low duty directed connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_directed_duration = CY_BT_LOW_DUTY_DIRECTED_ADV_DURATION, /* Low duty directed connectable advertising duration in seconds (0 for infinite) */ |
| |
| .high_duty_nonconn_min_interval = CY_BT_HIGH_DUTY_NONCONN_ADV_MIN_INTERVAL, /* High duty non-connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_nonconn_max_interval = CY_BT_HIGH_DUTY_NONCONN_ADV_MAX_INTERVAL, /* High duty non-connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .high_duty_nonconn_duration = CY_BT_HIGH_DUTY_NONCONN_ADV_DURATION, /* High duty non-connectable advertising duration in seconds (0 for infinite) */ |
| |
| .low_duty_nonconn_min_interval = CY_BT_LOW_DUTY_NONCONN_ADV_MIN_INTERVAL, /* Low duty non-connectable minimum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_nonconn_max_interval = CY_BT_LOW_DUTY_NONCONN_ADV_MAX_INTERVAL, /* Low duty non-connectable maximum advertising interval (in slots (1 slot = 0.625 ms)) */ |
| .low_duty_nonconn_duration = CY_BT_LOW_DUTY_NONCONN_ADV_DURATION /* Low duty non-connectable advertising duration in seconds (0 for infinite) */ |
| }, |
| |
| /* GATT configuration */ |
| .gatt_cfg = |
| { |
| .appearance = CY_BT_APPEARANCE, /* GATT appearance (see gatt_appearance_e) */ |
| .client_max_links = CY_BT_CLIENT_MAX_LINKS, /* Client config: maximum number of servers that local client can connect to */ |
| .server_max_links = CY_BT_SERVER_MAX_LINKS, /* Server config: maximum number of remote clients connections allowed by the local */ |
| .max_attr_len = CY_BT_MAX_ATTR_LEN, /* Maximum attribute length; gki_cfg must have a corresponding buffer pool that can hold this length */ |
| .max_mtu_size = CY_BT_MTU_SIZE /* Maximum MTU size for GATT connections, should be between 23 and (max_attr_len + 5) */ |
| }, |
| |
| /* RFCOMM configuration */ |
| .rfcomm_cfg = |
| { |
| .max_links = 0, /* Maximum number of simultaneous connected remote devices */ |
| .max_ports = 0 /* Maximum number of simultaneous RFCOMM ports */ |
| }, |
| |
| /* Application-managed L2CAP protocol configuration */ |
| .l2cap_application = |
| { |
| .max_links = 0, /* Maximum number of application-managed l2cap links (BR/EDR and LE) */ |
| |
| /* BR EDR l2cap configuration */ |
| .max_psm = 0, /* Maximum number of application-managed BR/EDR PSMs */ |
| .max_channels = 0, /* Maximum number of application-managed BR/EDR channels */ |
| |
| /* LE L2cap connection-oriented channels configuration */ |
| .max_le_psm = CY_BT_L2CAP_MAX_LE_PSM, /* Maximum number of application-managed LE PSMs */ |
| .max_le_channels = CY_BT_L2CAP_MAX_LE_CHANNELS, /* Maximum number of application-managed LE channels */ |
| /* LE L2cap fixed channel configuration */ |
| .max_le_l2cap_fixed_channels = 0, /* Maximum number of application-managed fixed channels supported (in addition to mandatory channels 4, 5 and 6) */ |
| .max_rx_mtu = CY_BT_L2CAP_MTU_SIZE /* Maximum RX MTU allowed */ |
| }, |
| |
| .addr_resolution_db_size = 5, /* LE Address Resolution DB settings - effective only for pre 4.2 controller */ |
| .rpa_refresh_timeout = CY_BT_RPA_TIMEOUT, /* Interval of random address refreshing - secs */ |
| .stack_scratch_size = WICED_BT_CFG_DEFAULT_STACK_SCRATCH_SIZE, /* Memory area reserved for the stack transient memory requirements */ |
| .ble_white_list_size = CY_BT_WHITE_LIST_SIZE, /* Maximum number of white list devices allowed. Cannot be more than 128 */ |
| .default_ble_power_level = CY_BT_TX_POWER /* Default LE power level */ |
| }; |
| #endif |
| |
| #ifdef __cplusplus |
| } |
| #endif |
