| /* |
| * |
| * Copyright (c) 2021 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| // THIS FILE IS GENERATED BY ZAP |
| |
| #include <app/chip-zcl-zpro-codec.h> |
| |
| #include <support/BufferWriter.h> |
| #include <support/SafeInt.h> |
| #include <support/logging/CHIPLogging.h> |
| |
| #include <app/util/basic-types.h> |
| #include <lib/support/Span.h> |
| |
| using namespace chip; |
| using namespace chip::System; |
| using namespace chip::Encoding::LittleEndian; |
| |
| #define COMMAND_HEADER(name, clusterId) \ |
| const char * kName = name; \ |
| \ |
| PacketBufferWriter buf(System::PacketBufferHandle::New(kMaxBufferSize)); \ |
| if (buf.IsNull()) \ |
| { \ |
| ChipLogError(Zcl, "Could not allocate packet buffer while trying to encode %s command", kName); \ |
| return PacketBufferHandle(); \ |
| } \ |
| \ |
| if (doEncodeApsFrame(buf, clusterId, kSourceEndpoint, destinationEndpoint, 0, 0, 0, 0, false)) \ |
| { |
| |
| #define COMMAND_FOOTER() \ |
| } \ |
| if (!buf.Fit()) \ |
| { \ |
| ChipLogError(Zcl, "Command %s can't fit in the allocated buffer", kName); \ |
| } \ |
| return buf.Finalize(); |
| |
| /*----------------------------------------------------------------------------*\ |
| | Cluster Name | ID | |
| |---------------------------------------------------------------------+--------| |
| | Basic | 0x0028 | |
| | EthernetNetworkDiagnostics | 0x0037 | |
| | GeneralCommissioning | 0x0030 | |
| | GeneralDiagnostics | 0x0033 | |
| | LevelControl | 0x0008 | |
| | NetworkCommissioning | 0x0031 | |
| | OnOff | 0x0006 | |
| | OperationalCredentials | 0x003E | |
| | PumpConfigurationAndControl | 0x0200 | |
| | SoftwareDiagnostics | 0x0034 | |
| | TemperatureMeasurement | 0x0402 | |
| | TemperatureMeasurement | 0x0402 | |
| | ThreadNetworkDiagnostics | 0x0035 | |
| | TrustedRootCertificates | 0x003F | |
| | WiFiNetworkDiagnostics | 0x0036 | |
| \*----------------------------------------------------------------------------*/ |
| |
| #define EMBER_ZCL_REPORTING_DIRECTION_REPORTED 0x00 |
| |
| #define ZCL_READ_ATTRIBUTES_COMMAND_ID (0x00) |
| #define ZCL_READ_ATTRIBUTES_RESPONSE_COMMAND_ID (0x01) |
| #define ZCL_WRITE_ATTRIBUTES_COMMAND_ID (0x02) |
| #define ZCL_WRITE_ATTRIBUTES_UNDIVIDED_COMMAND_ID (0x03) |
| #define ZCL_WRITE_ATTRIBUTES_RESPONSE_COMMAND_ID (0x04) |
| #define ZCL_WRITE_ATTRIBUTES_NO_RESPONSE_COMMAND_ID (0x05) |
| #define ZCL_CONFIGURE_REPORTING_COMMAND_ID (0x06) |
| #define ZCL_CONFIGURE_REPORTING_RESPONSE_COMMAND_ID (0x07) |
| #define ZCL_READ_REPORTING_CONFIGURATION_COMMAND_ID (0x08) |
| #define ZCL_READ_REPORTING_CONFIGURATION_RESPONSE_COMMAND_ID (0x09) |
| #define ZCL_REPORT_ATTRIBUTES_COMMAND_ID (0x0A) |
| #define ZCL_DEFAULT_RESPONSE_COMMAND_ID (0x0B) |
| #define ZCL_DISCOVER_ATTRIBUTES_COMMAND_ID (0x0C) |
| #define ZCL_DISCOVER_ATTRIBUTES_RESPONSE_COMMAND_ID (0x0D) |
| #define ZCL_READ_ATTRIBUTES_STRUCTURED_COMMAND_ID (0x0E) |
| #define ZCL_WRITE_ATTRIBUTES_STRUCTURED_COMMAND_ID (0x0F) |
| #define ZCL_WRITE_ATTRIBUTES_STRUCTURED_RESPONSE_COMMAND_ID (0x10) |
| #define ZCL_DISCOVER_COMMANDS_RECEIVED_COMMAND_ID (0x11) |
| #define ZCL_DISCOVER_COMMANDS_RECEIVED_RESPONSE_COMMAND_ID (0x12) |
| #define ZCL_DISCOVER_COMMANDS_GENERATED_COMMAND_ID (0x13) |
| #define ZCL_DISCOVER_COMMANDS_GENERATED_RESPONSE_COMMAND_ID (0x14) |
| #define ZCL_DISCOVER_ATTRIBUTES_EXTENDED_COMMAND_ID (0x15) |
| #define ZCL_DISCOVER_ATTRIBUTES_EXTENDED_RESPONSE_COMMAND_ID (0x16) |
| |
| #define LEVEL_CONTROL_CLUSTER_ID 0x0008 |
| #define ZCL_MOVE_COMMAND_ID (0x01) |
| #define ZCL_MOVE_TO_LEVEL_COMMAND_ID (0x00) |
| #define ZCL_MOVE_TO_LEVEL_WITH_ON_OFF_COMMAND_ID (0x04) |
| #define ZCL_MOVE_WITH_ON_OFF_COMMAND_ID (0x05) |
| #define ZCL_STEP_COMMAND_ID (0x02) |
| #define ZCL_STEP_WITH_ON_OFF_COMMAND_ID (0x06) |
| #define ZCL_STOP_COMMAND_ID (0x03) |
| #define ZCL_STOP_WITH_ON_OFF_COMMAND_ID (0x07) |
| |
| #define ON_OFF_CLUSTER_ID 0x0006 |
| #define ZCL_OFF_COMMAND_ID (0x00) |
| #define ZCL_ON_COMMAND_ID (0x01) |
| #define ZCL_TOGGLE_COMMAND_ID (0x02) |
| |
| #define PUMP_CONFIG_CONTROL_CLUSTER_ID 0x0200 |
| |
| #define TEMP_MEASUREMENT_CLUSTER_ID 0x0402 |
| |
| // TODO: Find a way to calculate maximum message length for clusters |
| // https://github.com/project-chip/connectedhomeip/issues/965 |
| constexpr uint16_t kMaxBufferSize = 1024; |
| |
| // This is a global command, so the low bits are 0b00. The command is |
| // standard, so does not need a manufacturer code, and we're sending client |
| // to server, so all the remaining bits are 0. |
| constexpr uint8_t kFrameControlGlobalCommand = 0x00; |
| |
| // Pick source endpoint as 1 for now |
| constexpr EndpointId kSourceEndpoint = 1; |
| |
| /*----------------------------------------------------------------------------*\ |
| | Cluster LevelControl | 0x0008 | |
| |------------------------------------------------------------------------------| |
| | Commands: | | |
| | * Move | 0x01 | |
| | * MoveToLevel | 0x00 | |
| | * MoveToLevelWithOnOff | 0x04 | |
| | * MoveWithOnOff | 0x05 | |
| | * Step | 0x02 | |
| | * StepWithOnOff | 0x06 | |
| | * Stop | 0x03 | |
| | * StopWithOnOff | 0x07 | |
| |------------------------------------------------------------------------------| |
| | Attributes: | | |
| | * CurrentLevel | 0x0000 | |
| | * ClusterRevision | 0xFFFD | |
| \*----------------------------------------------------------------------------*/ |
| |
| PacketBufferHandle encodeLevelControlClusterDiscoverAttributes(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("DiscoverLevelControlAttributes", LEVEL_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_DISCOVER_ATTRIBUTES_COMMAND_ID).Put16(0x0000).Put8(0xFF); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute CurrentLevel |
| */ |
| PacketBufferHandle encodeLevelControlClusterReadCurrentLevelAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadLevelControlCurrentLevel", LEVEL_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0000); |
| COMMAND_FOOTER(); |
| } |
| |
| PacketBufferHandle encodeLevelControlClusterConfigureCurrentLevelAttribute(uint8_t seqNum, EndpointId destinationEndpoint, |
| uint16_t minInterval, uint16_t maxInterval, |
| uint8_t change) |
| { |
| COMMAND_HEADER("ReportLevelControlCurrentLevel", LEVEL_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand) |
| .Put8(seqNum) |
| .Put8(ZCL_CONFIGURE_REPORTING_COMMAND_ID) |
| .Put8(EMBER_ZCL_REPORTING_DIRECTION_REPORTED) |
| .Put16(0x0000) |
| .Put8(32) |
| .Put16(minInterval) |
| .Put16(maxInterval); |
| buf.Put8(static_cast<uint8_t>(change)); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute ClusterRevision |
| */ |
| PacketBufferHandle encodeLevelControlClusterReadClusterRevisionAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadLevelControlClusterRevision", LEVEL_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0xFFFD); |
| COMMAND_FOOTER(); |
| } |
| |
| /*----------------------------------------------------------------------------*\ |
| | Cluster OnOff | 0x0006 | |
| |------------------------------------------------------------------------------| |
| | Commands: | | |
| | * Off | 0x00 | |
| | * On | 0x01 | |
| | * Toggle | 0x02 | |
| |------------------------------------------------------------------------------| |
| | Attributes: | | |
| | * OnOff | 0x0000 | |
| | * ClusterRevision | 0xFFFD | |
| \*----------------------------------------------------------------------------*/ |
| |
| PacketBufferHandle encodeOnOffClusterDiscoverAttributes(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("DiscoverOnOffAttributes", ON_OFF_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_DISCOVER_ATTRIBUTES_COMMAND_ID).Put16(0x0000).Put8(0xFF); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute OnOff |
| */ |
| PacketBufferHandle encodeOnOffClusterReadOnOffAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadOnOffOnOff", ON_OFF_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0000); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute ClusterRevision |
| */ |
| PacketBufferHandle encodeOnOffClusterReadClusterRevisionAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadOnOffClusterRevision", ON_OFF_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0xFFFD); |
| COMMAND_FOOTER(); |
| } |
| |
| /*----------------------------------------------------------------------------*\ |
| | Cluster PumpConfigurationAndControl | 0x0200 | |
| |------------------------------------------------------------------------------| |
| | Commands: | | |
| |------------------------------------------------------------------------------| |
| | Attributes: | | |
| | * MaxPressure | 0x0000 | |
| | * MaxSpeed | 0x0001 | |
| | * MaxFlow | 0x0002 | |
| | * EffectiveOperationMode | 0x0011 | |
| | * EffectiveControlMode | 0x0012 | |
| | * Capacity | 0x0013 | |
| | * OperationMode | 0x0020 | |
| | * ClusterRevision | 0xFFFD | |
| \*----------------------------------------------------------------------------*/ |
| |
| PacketBufferHandle encodePumpConfigurationAndControlClusterDiscoverAttributes(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("DiscoverPumpConfigurationAndControlAttributes", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_DISCOVER_ATTRIBUTES_COMMAND_ID).Put16(0x0000).Put8(0xFF); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MaxPressure |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadMaxPressureAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlMaxPressure", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0000); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MaxSpeed |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadMaxSpeedAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlMaxSpeed", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0001); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MaxFlow |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadMaxFlowAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlMaxFlow", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0002); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute EffectiveOperationMode |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadEffectiveOperationModeAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlEffectiveOperationMode", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0011); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute EffectiveControlMode |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadEffectiveControlModeAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlEffectiveControlMode", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0012); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute Capacity |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadCapacityAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlCapacity", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0013); |
| COMMAND_FOOTER(); |
| } |
| |
| PacketBufferHandle encodePumpConfigurationAndControlClusterConfigureCapacityAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint, |
| uint16_t minInterval, uint16_t maxInterval, |
| int16_t change) |
| { |
| COMMAND_HEADER("ReportPumpConfigurationAndControlCapacity", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand) |
| .Put8(seqNum) |
| .Put8(ZCL_CONFIGURE_REPORTING_COMMAND_ID) |
| .Put8(EMBER_ZCL_REPORTING_DIRECTION_REPORTED) |
| .Put16(0x0013) |
| .Put8(41) |
| .Put16(minInterval) |
| .Put16(maxInterval); |
| buf.Put16(static_cast<uint16_t>(change)); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute OperationMode |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadOperationModeAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlOperationMode", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0020); |
| COMMAND_FOOTER(); |
| } |
| |
| PacketBufferHandle encodePumpConfigurationAndControlClusterWriteOperationModeAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint, |
| uint8_t operationMode) |
| { |
| COMMAND_HEADER("WritePumpConfigurationAndControlOperationMode", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand) |
| .Put8(seqNum) |
| .Put8(ZCL_WRITE_ATTRIBUTES_COMMAND_ID) |
| .Put16(0x0020) |
| .Put8(48) |
| .Put8(static_cast<uint8_t>(operationMode)); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute ClusterRevision |
| */ |
| PacketBufferHandle encodePumpConfigurationAndControlClusterReadClusterRevisionAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadPumpConfigurationAndControlClusterRevision", PUMP_CONFIG_CONTROL_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0xFFFD); |
| COMMAND_FOOTER(); |
| } |
| |
| /*----------------------------------------------------------------------------*\ |
| | Cluster TemperatureMeasurement | 0x0402 | |
| |------------------------------------------------------------------------------| |
| | Commands: | | |
| |------------------------------------------------------------------------------| |
| | Attributes: | | |
| | * MeasuredValue | 0x0000 | |
| | * MinMeasuredValue | 0x0001 | |
| | * MaxMeasuredValue | 0x0002 | |
| | * ClusterRevision | 0xFFFD | |
| \*----------------------------------------------------------------------------*/ |
| |
| PacketBufferHandle encodeTemperatureMeasurementClusterDiscoverAttributes(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("DiscoverTemperatureMeasurementAttributes", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_DISCOVER_ATTRIBUTES_COMMAND_ID).Put16(0x0000).Put8(0xFF); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MeasuredValue |
| */ |
| PacketBufferHandle encodeTemperatureMeasurementClusterReadMeasuredValueAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadTemperatureMeasurementMeasuredValue", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0000); |
| COMMAND_FOOTER(); |
| } |
| |
| PacketBufferHandle encodeTemperatureMeasurementClusterConfigureMeasuredValueAttribute(uint8_t seqNum, |
| EndpointId destinationEndpoint, |
| uint16_t minInterval, uint16_t maxInterval, |
| int16_t change) |
| { |
| COMMAND_HEADER("ReportTemperatureMeasurementMeasuredValue", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand) |
| .Put8(seqNum) |
| .Put8(ZCL_CONFIGURE_REPORTING_COMMAND_ID) |
| .Put8(EMBER_ZCL_REPORTING_DIRECTION_REPORTED) |
| .Put16(0x0000) |
| .Put8(41) |
| .Put16(minInterval) |
| .Put16(maxInterval); |
| buf.Put16(static_cast<uint16_t>(change)); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MinMeasuredValue |
| */ |
| PacketBufferHandle encodeTemperatureMeasurementClusterReadMinMeasuredValueAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadTemperatureMeasurementMinMeasuredValue", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0001); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute MaxMeasuredValue |
| */ |
| PacketBufferHandle encodeTemperatureMeasurementClusterReadMaxMeasuredValueAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadTemperatureMeasurementMaxMeasuredValue", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0x0002); |
| COMMAND_FOOTER(); |
| } |
| |
| /* |
| * Attribute ClusterRevision |
| */ |
| PacketBufferHandle encodeTemperatureMeasurementClusterReadClusterRevisionAttribute(uint8_t seqNum, EndpointId destinationEndpoint) |
| { |
| COMMAND_HEADER("ReadTemperatureMeasurementClusterRevision", TEMP_MEASUREMENT_CLUSTER_ID); |
| buf.Put8(kFrameControlGlobalCommand).Put8(seqNum).Put8(ZCL_READ_ATTRIBUTES_COMMAND_ID).Put16(0xFFFD); |
| COMMAND_FOOTER(); |
| } |
