examples/ota-provider-app/ota-provider-common/BdxOtaSender.cpp

/*
 *
 *    Copyright (c) 2021 Project CHIP Authors
 *
 *    Licensed under the Apache License, Version 2.0 (the "License");
 *    you may not use this file except in compliance with the License.
 *    You may obtain a copy of the License at
 *
 *        http://www.apache.org/licenses/LICENSE-2.0
 *
 *    Unless required by applicable law or agreed to in writing, software
 *    distributed under the License is distributed on an "AS IS" BASIS,
 *    WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 *    See the License for the specific language governing permissions and
 *    limitations under the License.
 */

#include <ota-provider-common/BdxOtaSender.h>

#include <lib/core/CHIPError.h>
#include <lib/support/BitFlags.h>
#include <lib/support/CHIPMemString.h>
#include <messaging/ExchangeContext.h>
#include <messaging/Flags.h>
#include <protocols/bdx/BdxTransferSession.h>

#include <fstream>

using chip::bdx::StatusCode;
using chip::bdx::TransferControlFlags;
using chip::bdx::TransferSession;

BdxOtaSender::BdxOtaSender()
{
    memset(mFileDesignator, 0, chip::bdx::kMaxFileDesignatorLen);
}

CHIP_ERROR BdxOtaSender::InitializeTransfer(chip::FabricIndex fabricIndex, chip::NodeId nodeId)
{
    if (mInitialized)
    {
        // Reset stale connection from the Same Node if exists
        if ((mFabricIndex.HasValue() && mFabricIndex.Value() == fabricIndex) && (mNodeId.HasValue() && mNodeId.Value() == nodeId))
        {
            Reset();
        }
        // Prevent a new node connection since another is active
        else if ((mFabricIndex.HasValue() && mFabricIndex.Value() != fabricIndex) ||
                 (mNodeId.HasValue() && mNodeId.Value() != nodeId))
        {
            return CHIP_ERROR_BUSY;
        }
        else
        {
            return CHIP_ERROR_INTERNAL;
        }
    }
    mFabricIndex.SetValue(fabricIndex);
    mNodeId.SetValue(nodeId);
    mInitialized = true;
    return CHIP_NO_ERROR;
}

void BdxOtaSender::HandleTransferSessionOutput(TransferSession::OutputEvent & event)
{
    CHIP_ERROR err = CHIP_NO_ERROR;

    if (event.EventType != TransferSession::OutputEventType::kNone)
    {
        ChipLogDetail(BDX, "OutputEvent type: %s", event.ToString(event.EventType));
    }

    switch (event.EventType)
    {
    case TransferSession::OutputEventType::kNone:
        break;
    case TransferSession::OutputEventType::kMsgToSend: {
        chip::Messaging::SendFlags sendFlags;
        if (!event.msgTypeData.HasMessageType(chip::Protocols::SecureChannel::MsgType::StatusReport))
        {
            // All messages sent from the Sender expect a response, except for a StatusReport which would indicate an error and the
            // end of the transfer.
            sendFlags.Set(chip::Messaging::SendMessageFlags::kExpectResponse);
        }
        VerifyOrReturn(mExchangeCtx != nullptr);
        err = mExchangeCtx->SendMessage(event.msgTypeData.ProtocolId, event.msgTypeData.MessageType, std::move(event.MsgData),
                                        sendFlags);

        if (err == CHIP_NO_ERROR)
        {
            if (!sendFlags.Has(chip::Messaging::SendMessageFlags::kExpectResponse))
            {
                // After sending the StatusReport, exchange context gets closed so, set mExchangeCtx to null
                mExchangeCtx = nullptr;
            }
        }
        else
        {
            ChipLogError(BDX, "SendMessage failed: %" CHIP_ERROR_FORMAT, err.Format());
            Reset();
        }

        break;
    }
    case TransferSession::OutputEventType::kInitReceived: {
        // TransferSession will automatically reject a transfer if there are no
        // common supported control modes. It will also default to the smaller
        // block size.
        TransferSession::TransferAcceptData acceptData;
        acceptData.ControlMode  = TransferControlFlags::kReceiverDrive; // OTA must use receiver drive
        acceptData.MaxBlockSize = mTransfer.GetTransferBlockSize();
        acceptData.StartOffset  = mTransfer.GetStartOffset();
        acceptData.Length       = mTransfer.GetTransferLength();
        VerifyOrReturn(mTransfer.AcceptTransfer(acceptData) == CHIP_NO_ERROR,
                       ChipLogError(BDX, "AcceptTransfer failed: %" CHIP_ERROR_FORMAT, err.Format()));

        // Store the file designator used during block query
        uint16_t fdl       = 0;
        const uint8_t * fd = mTransfer.GetFileDesignator(fdl);
        VerifyOrReturn(fdl < chip::bdx::kMaxFileDesignatorLen,
                       ChipLogError(BDX, "Cannot store file designator with length = %d", fdl));
        memcpy(mFileDesignator, fd, fdl);
        mFileDesignator[fdl] = 0;

        break;
    }
    case TransferSession::OutputEventType::kQueryReceived: {
        TransferSession::BlockData blockData;
        uint16_t blockSize   = mTransfer.GetTransferBlockSize();
        uint16_t bytesToRead = blockSize;

        // TODO: This should be a utility function in TransferSession
        if (mTransfer.GetTransferLength() > 0 && mNumBytesSent + blockSize > mTransfer.GetTransferLength())
        {
            // cast should be safe because of condition above
            bytesToRead = static_cast<uint16_t>(mTransfer.GetTransferLength() - mNumBytesSent);
        }

        chip::System::PacketBufferHandle blockBuf = chip::System::PacketBufferHandle::New(bytesToRead);
        if (blockBuf.IsNull())
        {
            // TODO(#13981): AbortTransfer() needs to support GeneralStatusCode failures as well as BDX specific errors.
            mTransfer.AbortTransfer(StatusCode::kUnknown);
            return;
        }

        std::ifstream otaFile(mFileDesignator, std::ifstream::in);
        if (!otaFile.good())
        {
            ChipLogError(BDX, "OTA file open failed");
            mTransfer.AbortTransfer(StatusCode::kFileDesignatorUnknown);
            return;
        }

        otaFile.seekg(mNumBytesSent);
        otaFile.read(reinterpret_cast<char *>(blockBuf->Start()), bytesToRead);
        if (!(otaFile.good() || otaFile.eof()))
        {
            ChipLogError(BDX, "OTA file read failed");
            mTransfer.AbortTransfer(StatusCode::kFileDesignatorUnknown);
            return;
        }

        blockData.Data   = blockBuf->Start();
        blockData.Length = static_cast<size_t>(otaFile.gcount());
        blockData.IsEof  = (blockData.Length < blockSize) ||
            (mNumBytesSent + static_cast<uint64_t>(blockData.Length) == mTransfer.GetTransferLength() || (otaFile.peek() == EOF));
        mNumBytesSent = static_cast<uint32_t>(mNumBytesSent + blockData.Length);
        otaFile.close();

        err = mTransfer.PrepareBlock(blockData);
        if (err != CHIP_NO_ERROR)
        {
            ChipLogError(BDX, "PrepareBlock failed: %" CHIP_ERROR_FORMAT, err.Format());
            mTransfer.AbortTransfer(StatusCode::kUnknown);
        }
        break;
    }
    case TransferSession::OutputEventType::kAckReceived:
        break;
    case TransferSession::OutputEventType::kAckEOFReceived:
        ChipLogDetail(BDX, "Transfer completed, got AckEOF");
        Reset();
        break;
    case TransferSession::OutputEventType::kStatusReceived:
        ChipLogError(BDX, "Got StatusReport %x", static_cast<uint16_t>(event.statusData.statusCode));
        Reset();
        break;
    case TransferSession::OutputEventType::kInternalError:
        ChipLogError(BDX, "InternalError");
        Reset();
        break;
    case TransferSession::OutputEventType::kTransferTimeout:
        ChipLogError(BDX, "Transfer timed out");
        Reset();
        break;
    case TransferSession::OutputEventType::kAcceptReceived:
    case TransferSession::OutputEventType::kBlockReceived:
    default:
        // TransferSession should prevent this case from happening.
        ChipLogError(BDX, "Unsupported event type");
    }
}

/* Reset() calls bdx::TransferSession::Reset() which sets the output event type to
 * TransferSession::OutputEventType::kNone. So, bdx::TransferFacilitator::PollForOutput()
 * will call HandleTransferSessionOutput() with event TransferSession::OutputEventType::kNone.
 * Since we are ignoring kNone events so, it is okay HandleTransferSessionOutput() being called with event kNone
 */
void BdxOtaSender::Reset()
{
    mFabricIndex.ClearValue();
    mNodeId.ClearValue();
    ResetTransfer();
    if (mExchangeCtx != nullptr)
    {
        mExchangeCtx->Close();
        mExchangeCtx = nullptr;
    }

    mInitialized  = false;
    mNumBytesSent = 0;
    memset(mFileDesignator, 0, chip::bdx::kMaxFileDesignatorLen);
}