| /* |
| * |
| * Copyright (c) 2020 Project CHIP Authors |
| * |
| * Licensed under the Apache License, Version 2.0 (the "License"); |
| * you may not use this file except in compliance with the License. |
| * You may obtain a copy of the License at |
| * |
| * http://www.apache.org/licenses/LICENSE-2.0 |
| * |
| * Unless required by applicable law or agreed to in writing, software |
| * distributed under the License is distributed on an "AS IS" BASIS, |
| * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| * See the License for the specific language governing permissions and |
| * limitations under the License. |
| */ |
| |
| /** |
| * @file |
| * This file implements the ExchangeContext class. |
| * |
| */ |
| #ifndef __STDC_FORMAT_MACROS |
| #define __STDC_FORMAT_MACROS |
| #endif |
| |
| #ifndef __STDC_LIMIT_MACROS |
| #define __STDC_LIMIT_MACROS |
| #endif |
| |
| #include <inttypes.h> |
| #include <stdint.h> |
| #include <stdlib.h> |
| |
| #include <lib/core/CHIPCore.h> |
| #include <lib/core/CHIPEncoding.h> |
| #include <lib/core/CHIPKeyIds.h> |
| #include <lib/support/Defer.h> |
| #include <lib/support/TypeTraits.h> |
| #include <lib/support/logging/CHIPLogging.h> |
| #include <messaging/ApplicationExchangeDispatch.h> |
| #include <messaging/EphemeralExchangeDispatch.h> |
| #include <messaging/ExchangeContext.h> |
| #include <messaging/ExchangeMgr.h> |
| #include <platform/LockTracker.h> |
| #include <protocols/Protocols.h> |
| #include <protocols/secure_channel/Constants.h> |
| |
| #if CONFIG_DEVICE_LAYER |
| #include <platform/CHIPDeviceLayer.h> |
| #endif |
| |
| using namespace chip::Encoding; |
| using namespace chip::Inet; |
| using namespace chip::System; |
| |
| namespace chip { |
| namespace Messaging { |
| |
| static void DefaultOnMessageReceived(ExchangeContext * ec, Protocols::Id protocolId, uint8_t msgType, uint32_t messageCounter, |
| PacketBufferHandle && payload) |
| { |
| ChipLogError(ExchangeManager, |
| "Dropping unexpected message of type " ChipLogFormatMessageType " with protocolId " ChipLogFormatProtocolId |
| " and MessageCounter:" ChipLogFormatMessageCounter " on exchange " ChipLogFormatExchange, |
| msgType, ChipLogValueProtocolId(protocolId), messageCounter, ChipLogValueExchange(ec)); |
| } |
| |
| bool ExchangeContext::IsInitiator() const |
| { |
| return mFlags.Has(Flags::kFlagInitiator); |
| } |
| |
| bool ExchangeContext::IsResponseExpected() const |
| { |
| return mFlags.Has(Flags::kFlagResponseExpected); |
| } |
| |
| void ExchangeContext::SetResponseExpected(bool inResponseExpected) |
| { |
| mFlags.Set(Flags::kFlagResponseExpected, inResponseExpected); |
| } |
| |
| void ExchangeContext::UseSuggestedResponseTimeout(Timeout applicationProcessingTimeout) |
| { |
| SetResponseTimeout(mSession->ComputeRoundTripTimeout(applicationProcessingTimeout)); |
| } |
| |
| void ExchangeContext::SetResponseTimeout(Timeout timeout) |
| { |
| mResponseTimeout = timeout; |
| } |
| |
| #if CONFIG_DEVICE_LAYER && CHIP_DEVICE_CONFIG_ENABLE_SED |
| void ExchangeContext::UpdateSEDIntervalMode() |
| { |
| if (!HasSessionHandle()) |
| { |
| // After the session has been deleted, no further communication can occur on the exchange, |
| // so withdraw a SED active mode request. |
| UpdateSEDIntervalMode(false); |
| return; |
| } |
| |
| Transport::PeerAddress address; |
| |
| switch (GetSessionHandle()->GetSessionType()) |
| { |
| case Transport::Session::SessionType::kSecure: |
| address = GetSessionHandle()->AsSecureSession()->GetPeerAddress(); |
| break; |
| case Transport::Session::SessionType::kUnauthenticated: |
| address = GetSessionHandle()->AsUnauthenticatedSession()->GetPeerAddress(); |
| break; |
| default: |
| return; |
| } |
| |
| VerifyOrReturn(address.GetTransportType() != Transport::Type::kBle); |
| UpdateSEDIntervalMode(IsResponseExpected() || IsSendExpected() || IsMessageNotAcked()); |
| } |
| |
| void ExchangeContext::UpdateSEDIntervalMode(bool activeMode) |
| { |
| if (activeMode != IsRequestingActiveMode()) |
| { |
| SetRequestingActiveMode(activeMode); |
| DeviceLayer::ConnectivityMgr().RequestSEDActiveMode(activeMode, true); |
| } |
| } |
| #endif |
| |
| CHIP_ERROR ExchangeContext::SendMessage(Protocols::Id protocolId, uint8_t msgType, PacketBufferHandle && msgBuf, |
| const SendFlags & sendFlags) |
| { |
| // This is the first point all outgoing messages funnel through. Ensure |
| // that our message sends are all synchronized correctly. |
| assertChipStackLockedByCurrentThread(); |
| |
| bool isStandaloneAck = |
| (protocolId == Protocols::SecureChannel::Id) && msgType == to_underlying(Protocols::SecureChannel::MsgType::StandaloneAck); |
| |
| VerifyOrReturnError(mExchangeMgr != nullptr, CHIP_ERROR_INTERNAL); |
| VerifyOrReturnError(mSession, CHIP_ERROR_CONNECTION_ABORTED); |
| |
| // Don't let method get called on a freed object. |
| VerifyOrDie(mExchangeMgr != nullptr && GetReferenceCount() > 0); |
| |
| // we hold the exchange context here in case the entity that |
| // originally generated it tries to close it as a result of |
| // an error arising below. at the end, we have to close it. |
| ExchangeHandle ref(*this); |
| |
| // If session requires MRP, NoAutoRequestAck send flag is not specified and is not a group exchange context, request reliable |
| // transmission. |
| bool reliableTransmissionRequested = |
| GetSessionHandle()->RequireMRP() && !sendFlags.Has(SendMessageFlags::kNoAutoRequestAck) && !IsGroupExchangeContext(); |
| |
| bool startedResponseTimer = false; |
| // If a response message is expected... |
| if (sendFlags.Has(SendMessageFlags::kExpectResponse) && !IsGroupExchangeContext()) |
| { |
| // Only one 'response expected' message can be outstanding at a time. |
| if (IsResponseExpected()) |
| { |
| // TODO: add a test for this case. |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| SetResponseExpected(true); |
| |
| // Arm the response timer if a timeout has been specified. |
| if (mResponseTimeout > System::Clock::kZero) |
| { |
| CHIP_ERROR err = StartResponseTimer(); |
| if (err != CHIP_NO_ERROR) |
| { |
| SetResponseExpected(false); |
| return err; |
| } |
| startedResponseTimer = true; |
| } |
| } |
| |
| { |
| // ExchangeContext for group are supposed to always be Initiator |
| if (IsGroupExchangeContext() && !IsInitiator()) |
| { |
| return CHIP_ERROR_INTERNAL; |
| } |
| |
| // |
| // It is possible that we might have evicted a session as a side-effect of processing an inbound message on this exchange. |
| // We cannot proceed any further sending a message since we don't have an attached session, so let's error out. |
| // |
| // This should not happen to well-behaved logic attempting to sending messages on exchanges, so let's print out a warning |
| // to ensure it alerts someone to fixing their logic... |
| // |
| if (!mSession) |
| { |
| ChipLogError(ExchangeManager, |
| "WARNING: We shouldn't be sending a message on an exchange that has no attached session..."); |
| return CHIP_ERROR_MISSING_SECURE_SESSION; |
| } |
| |
| SessionHandle session = GetSessionHandle(); |
| CHIP_ERROR err; |
| |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| if (mInjectedFailures.Has(InjectedFailureType::kFailOnSend)) |
| { |
| err = CHIP_ERROR_SENDING_BLOCKED; |
| } |
| else |
| { |
| #endif |
| err = mDispatch.SendMessage(GetExchangeMgr()->GetSessionManager(), session, mExchangeId, IsInitiator(), |
| GetReliableMessageContext(), reliableTransmissionRequested, protocolId, msgType, |
| std::move(msgBuf)); |
| #if CONFIG_BUILD_FOR_HOST_UNIT_TEST |
| } |
| #endif |
| if (err != CHIP_NO_ERROR) |
| { |
| // We should only cancel the response timer if the ExchangeContext fails to send the message that starts the response |
| // timer. |
| if (startedResponseTimer) |
| { |
| CancelResponseTimer(); |
| SetResponseExpected(false); |
| } |
| |
| // If we can't even send a message (send failed with a non-transient |
| // error), mark the session as defunct, just like we would if we |
| // thought we sent the message and never got a response. |
| if (session->IsSecureSession() && session->AsSecureSession()->IsCASESession()) |
| { |
| session->AsSecureSession()->MarkAsDefunct(); |
| } |
| } |
| |
| // Standalone acks are not application-level message sends. |
| if (!isStandaloneAck && err == CHIP_NO_ERROR) |
| { |
| // |
| // Once we've sent the message successfully, we can clear out the WillSendMessage flag. |
| // |
| mFlags.Clear(Flags::kFlagWillSendMessage); |
| MessageHandled(); |
| } |
| |
| return err; |
| } |
| } |
| |
| void ExchangeContext::DoClose(bool clearRetransTable) |
| { |
| if (mFlags.Has(Flags::kFlagClosed)) |
| { |
| return; |
| } |
| |
| mFlags.Set(Flags::kFlagClosed); |
| |
| // Clear protocol callbacks |
| if (mDelegate != nullptr) |
| { |
| mDelegate->OnExchangeClosing(this); |
| } |
| mDelegate = nullptr; |
| |
| // Closure of an exchange context is based on ref counting. The Protocol, when it calls DoClose(), indicates that |
| // it is done with the exchange context and the message layer sets all callbacks to NULL and does not send anything |
| // received on the exchange context up to higher layers. At this point, the message layer needs to handle the |
| // remaining work to be done on that exchange, (e.g. send all pending acks) before truly cleaning it up. |
| FlushAcks(); |
| |
| // In case the protocol wants a harder release of the EC right away, such as calling Abort(), exchange |
| // needs to clear the MRP retransmission table immediately. |
| if (clearRetransTable) |
| { |
| mExchangeMgr->GetReliableMessageMgr()->ClearRetransTable(this); |
| } |
| |
| if (IsResponseExpected()) |
| { |
| // Cancel the response timer. |
| CancelResponseTimer(); |
| } |
| } |
| |
| /** |
| * Gracefully close an exchange context. This call decrements the |
| * reference count and releases the exchange when the reference |
| * count goes to zero. |
| * |
| */ |
| void ExchangeContext::Close() |
| { |
| VerifyOrDie(mExchangeMgr != nullptr && GetReferenceCount() > 0); |
| |
| #if defined(CHIP_EXCHANGE_CONTEXT_DETAIL_LOGGING) |
| ChipLogDetail(ExchangeManager, "ec - close[" ChipLogFormatExchange "], %s", ChipLogValueExchange(this), __func__); |
| #endif |
| |
| DoClose(false); |
| Release(); |
| } |
| /** |
| * Abort the Exchange context immediately and release all |
| * references to it. |
| * |
| */ |
| void ExchangeContext::Abort() |
| { |
| VerifyOrDie(mExchangeMgr != nullptr && GetReferenceCount() > 0); |
| |
| #if defined(CHIP_EXCHANGE_CONTEXT_DETAIL_LOGGING) |
| ChipLogDetail(ExchangeManager, "ec - abort[" ChipLogFormatExchange "], %s", ChipLogValueExchange(this), __func__); |
| #endif |
| |
| DoClose(true); |
| Release(); |
| } |
| |
| void ExchangeContextDeletor::Release(ExchangeContext * ec) |
| { |
| ec->mExchangeMgr->ReleaseContext(ec); |
| } |
| |
| ExchangeContext::ExchangeContext(ExchangeManager * em, uint16_t ExchangeId, const SessionHandle & session, bool Initiator, |
| ExchangeDelegate * delegate, bool isEphemeralExchange) : |
| mDispatch(GetMessageDispatch(isEphemeralExchange, delegate)), |
| mSession(*this) |
| { |
| VerifyOrDie(mExchangeMgr == nullptr); |
| |
| mExchangeMgr = em; |
| mExchangeId = ExchangeId; |
| mSession.Grab(session); |
| mFlags.Set(Flags::kFlagInitiator, Initiator); |
| mFlags.Set(Flags::kFlagEphemeralExchange, isEphemeralExchange); |
| mDelegate = delegate; |
| |
| // |
| // If we're an initiator and we just created this exchange, we obviously did so to send a message. Let's go ahead and |
| // set the flag on this to correctly mark it as so. |
| // |
| // This only applies to non-ephemeral exchanges. Ephemeral exchanges do not have an intention of sending out a message |
| // since they're created expressly for the purposes of sending out a standalone ACK when the message could not be handled |
| // through normal means. |
| // |
| if (Initiator && !isEphemeralExchange) |
| { |
| WillSendMessage(); |
| } |
| |
| SetAckPending(false); |
| |
| // Do not request Ack for multicast |
| SetAutoRequestAck(!session->IsGroupSession()); |
| |
| #if defined(CHIP_EXCHANGE_CONTEXT_DETAIL_LOGGING) |
| ChipLogDetail(ExchangeManager, "ec++ id: " ChipLogFormatExchange, ChipLogValueExchange(this)); |
| #endif |
| SYSTEM_STATS_INCREMENT(chip::System::Stats::kExchangeMgr_NumContexts); |
| } |
| |
| ExchangeContext::~ExchangeContext() |
| { |
| VerifyOrDie(mExchangeMgr != nullptr && GetReferenceCount() == 0); |
| |
| // |
| // Ensure that DoClose has been called by the time we get here. If not, we have a leak somewhere. |
| // |
| VerifyOrDie(mFlags.Has(Flags::kFlagClosed)); |
| |
| #if CONFIG_DEVICE_LAYER && CHIP_DEVICE_CONFIG_ENABLE_SED |
| // Make sure that the exchange withdraws the request for Sleepy End Device active mode. |
| UpdateSEDIntervalMode(false); |
| #endif |
| |
| // Ideally, in this scenario, the retransmit table should |
| // be clear of any outstanding messages for this context and |
| // the boolean parameter passed to DoClose() should not matter. |
| |
| DoClose(false); |
| mExchangeMgr = nullptr; |
| |
| #if defined(CHIP_EXCHANGE_CONTEXT_DETAIL_LOGGING) |
| ChipLogDetail(ExchangeManager, "ec-- id: " ChipLogFormatExchange, ChipLogValueExchange(this)); |
| #endif |
| SYSTEM_STATS_DECREMENT(chip::System::Stats::kExchangeMgr_NumContexts); |
| } |
| |
| bool ExchangeContext::MatchExchange(const SessionHandle & session, const PacketHeader & packetHeader, |
| const PayloadHeader & payloadHeader) |
| { |
| // A given message is part of a particular exchange if... |
| return |
| |
| // The exchange identifier of the message matches the exchange identifier of the context. |
| (mExchangeId == payloadHeader.GetExchangeID()) |
| |
| // AND The Session associated with the incoming message matches the Session associated with the exchange. |
| && (mSession.Contains(session)) |
| |
| // TODO: This check should be already implied by the equality of session check, |
| // It should be removed after we have implemented the temporary node id for PASE and CASE sessions |
| && (IsEncryptionRequired() == packetHeader.IsEncrypted()) |
| |
| // AND The message was sent by an initiator and the exchange context is a responder (IsInitiator==false) |
| // OR The message was sent by a responder and the exchange context is an initiator (IsInitiator==true) (for the broadcast |
| // case, the initiator is ill defined) |
| |
| && (payloadHeader.IsInitiator() != IsInitiator()); |
| } |
| |
| void ExchangeContext::OnSessionReleased() |
| { |
| if (ShouldIgnoreSessionRelease()) |
| { |
| return; |
| } |
| |
| if (mFlags.Has(Flags::kFlagClosed)) |
| { |
| // Exchange is already being closed. It may occur when closing an exchange after sending |
| // RemoveFabric response which triggers removal of all sessions for the given fabric. |
| mExchangeMgr->GetReliableMessageMgr()->ClearRetransTable(this); |
| return; |
| } |
| |
| // Hold a ref to ourselves so we can make calls into our delegate that might |
| // decrease our refcount without worrying about use-after-free. |
| ExchangeHandle ref(*this); |
| |
| // |
| // If a send is not expected (either because we're waiting for a response OR |
| // we're in the middle of processing a OnMessageReceived call), we can go ahead |
| // and notify our delegate and abort the exchange since we still own the ref. |
| // |
| if (!IsSendExpected()) |
| { |
| if (IsResponseExpected()) |
| { |
| // If we're waiting on a response, we now know it's never going to show up |
| // and we should notify our delegate accordingly. |
| CancelResponseTimer(); |
| // We want to Abort, not just Close, so that RMP bits are cleared, so |
| // don't let NotifyResponseTimeout close us. |
| NotifyResponseTimeout(/* aCloseIfNeeded = */ false); |
| } |
| |
| Abort(); |
| } |
| else |
| { |
| DoClose(true /* clearRetransTable */); |
| } |
| } |
| |
| CHIP_ERROR ExchangeContext::StartResponseTimer() |
| { |
| System::Layer * lSystemLayer = mExchangeMgr->GetSessionManager()->SystemLayer(); |
| if (lSystemLayer == nullptr) |
| { |
| // this is an assertion error, which shall never happen |
| return CHIP_ERROR_INTERNAL; |
| } |
| |
| return lSystemLayer->StartTimer(mResponseTimeout, HandleResponseTimeout, this); |
| } |
| |
| void ExchangeContext::CancelResponseTimer() |
| { |
| System::Layer * lSystemLayer = mExchangeMgr->GetSessionManager()->SystemLayer(); |
| if (lSystemLayer == nullptr) |
| { |
| // this is an assertion error, which shall never happen |
| return; |
| } |
| |
| lSystemLayer->CancelTimer(HandleResponseTimeout, this); |
| } |
| |
| void ExchangeContext::HandleResponseTimeout(System::Layer * aSystemLayer, void * aAppState) |
| { |
| ExchangeContext * ec = reinterpret_cast<ExchangeContext *>(aAppState); |
| |
| if (ec == nullptr) |
| return; |
| |
| ec->NotifyResponseTimeout(/* aCloseIfNeeded = */ true); |
| } |
| |
| void ExchangeContext::NotifyResponseTimeout(bool aCloseIfNeeded) |
| { |
| SetResponseExpected(false); |
| |
| // Hold a ref to ourselves so we can make calls into our delegate that might |
| // decrease our refcount (e.g. by expiring out session) without worrying |
| // about use-after-free. |
| ExchangeHandle ref(*this); |
| |
| // mSession might be null if this timeout is due to the session being |
| // evicted. |
| if (mSession) |
| { |
| if (mSession->IsSecureSession() && mSession->AsSecureSession()->IsCASESession()) |
| { |
| mSession->AsSecureSession()->MarkAsDefunct(); |
| } |
| mSession->DispatchSessionEvent(&SessionDelegate::OnSessionHang); |
| } |
| |
| ExchangeDelegate * delegate = GetDelegate(); |
| |
| // Call the user's timeout handler. |
| if (delegate != nullptr) |
| { |
| delegate->OnResponseTimeout(this); |
| } |
| |
| if (aCloseIfNeeded) |
| { |
| MessageHandled(); |
| } |
| } |
| |
| CHIP_ERROR ExchangeContext::HandleMessage(uint32_t messageCounter, const PayloadHeader & payloadHeader, MessageFlags msgFlags, |
| PacketBufferHandle && msgBuf) |
| { |
| // We hold a reference to the ExchangeContext here to |
| // guard against Close() calls(decrementing the reference |
| // count) by the protocol before the CHIP Exchange |
| // layer has completed its work on the ExchangeContext. |
| ExchangeHandle ref(*this); |
| |
| bool isStandaloneAck = payloadHeader.HasMessageType(Protocols::SecureChannel::MsgType::StandaloneAck); |
| bool isDuplicate = msgFlags.Has(MessageFlagValues::kDuplicateMessage); |
| |
| auto deferred = MakeDefer([&]() { |
| // Duplicates and standalone acks are not application-level messages, so they should generally not lead to any state |
| // changes. The one exception to that is that if we have a null mDelegate then our lifetime is not application-defined, |
| // since we don't interact with the application at that point. That can happen when we are already closed (in which case |
| // MessageHandled is a no-op) or if we were just created to send a standalone ack for this incoming message, in which case |
| // we should treat it as an app-level message for purposes of our state. |
| if ((isStandaloneAck || isDuplicate) && mDelegate != nullptr) |
| { |
| return; |
| } |
| |
| MessageHandled(); |
| }); |
| |
| if (mDispatch.IsReliableTransmissionAllowed() && !IsGroupExchangeContext()) |
| { |
| if (!msgFlags.Has(MessageFlagValues::kDuplicateMessage) && payloadHeader.IsAckMsg() && |
| payloadHeader.GetAckMessageCounter().HasValue()) |
| { |
| HandleRcvdAck(payloadHeader.GetAckMessageCounter().Value()); |
| } |
| |
| if (payloadHeader.NeedsAck()) |
| { |
| // An acknowledgment needs to be sent back to the peer for this message on this exchange, |
| |
| HandleNeedsAck(messageCounter, msgFlags); |
| } |
| } |
| |
| if (IsAckPending() && !mDelegate) |
| { |
| // The incoming message wants an ack, but we have no delegate, so |
| // there's not going to be a response to piggyback on. Just flush the |
| // ack out right now. |
| ReturnErrorOnFailure(FlushAcks()); |
| } |
| |
| // The SecureChannel::StandaloneAck message type is only used for MRP; do not pass such messages to the application layer. |
| if (isStandaloneAck) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| // Since the message is duplicate, let's not forward it up the stack |
| if (isDuplicate) |
| { |
| return CHIP_NO_ERROR; |
| } |
| |
| if (IsEphemeralExchange()) |
| { |
| // The EphemeralExchange has done its job, since StandaloneAck is sent in previous FlushAcks() call. |
| return CHIP_NO_ERROR; |
| } |
| |
| if (IsMessageNotAcked()) |
| { |
| // The only way we can get here is a spec violation on the other side: |
| // we sent a message that needs an ack, and the other side responded |
| // with a message that does not contain an ack for the message we sent. |
| // Just drop this message; if we delivered it to our delegate it might |
| // try to send another message-needing-an-ack in response, which would |
| // violate our internal invariants. |
| ChipLogError(ExchangeManager, "Dropping message without piggyback ack when we are waiting for an ack."); |
| return CHIP_ERROR_INCORRECT_STATE; |
| } |
| |
| if (IsResponseExpected()) |
| { |
| // Since we got the response, cancel the response timer. |
| CancelResponseTimer(); |
| |
| // If the context was expecting a response to a previously sent message, this message |
| // is implicitly that response. |
| SetResponseExpected(false); |
| } |
| |
| // Don't send messages on to our delegate if our dispatch does not allow |
| // those messages. |
| if (mDelegate != nullptr && mDispatch.MessagePermitted(payloadHeader.GetProtocolID(), payloadHeader.GetMessageType())) |
| { |
| return mDelegate->OnMessageReceived(this, payloadHeader, std::move(msgBuf)); |
| } |
| |
| DefaultOnMessageReceived(this, payloadHeader.GetProtocolID(), payloadHeader.GetMessageType(), messageCounter, |
| std::move(msgBuf)); |
| return CHIP_NO_ERROR; |
| } |
| |
| void ExchangeContext::MessageHandled() |
| { |
| #if CONFIG_DEVICE_LAYER && CHIP_DEVICE_CONFIG_ENABLE_SED |
| UpdateSEDIntervalMode(); |
| #endif |
| |
| if (mFlags.Has(Flags::kFlagClosed) || IsResponseExpected() || IsSendExpected()) |
| { |
| return; |
| } |
| |
| Close(); |
| } |
| |
| ExchangeMessageDispatch & ExchangeContext::GetMessageDispatch(bool isEphemeralExchange, ExchangeDelegate * delegate) |
| { |
| if (isEphemeralExchange) |
| return EphemeralExchangeDispatch::Instance(); |
| |
| if (delegate != nullptr) |
| return delegate->GetMessageDispatch(); |
| |
| return ApplicationExchangeDispatch::Instance(); |
| } |
| |
| void ExchangeContext::AbortAllOtherCommunicationOnFabric() |
| { |
| if (!mSession || !mSession->IsSecureSession()) |
| { |
| ChipLogError(ExchangeManager, "AbortAllOtherCommunicationOnFabric called when we don't have a PASE/CASE session"); |
| return; |
| } |
| |
| // Save our session so it does not actually go away. |
| Optional<SessionHandle> session = mSession.Get(); |
| |
| SetIgnoreSessionRelease(true); |
| |
| GetExchangeMgr()->GetSessionManager()->ExpireAllSessionsForFabric(mSession->GetFabricIndex()); |
| |
| mSession.GrabExpiredSession(session.Value()); |
| |
| SetIgnoreSessionRelease(false); |
| } |
| |
| void ExchangeContext::ExchangeSessionHolder::GrabExpiredSession(const SessionHandle & session) |
| { |
| VerifyOrDie(session->AsSecureSession()->IsPendingEviction()); |
| GrabUnchecked(session); |
| } |
| |
| } // namespace Messaging |
| } // namespace chip |
