| # |
| # Copyright (c) 2022 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # |
| |
| rsource "../../zephyr/Kconfig" |
| |
| config TELINK_BLE_LIB |
| bool "Include third party Telink BLE SDK" |
| default n |
| help |
| Include third party Telink BLE SDK |
| |
| # See config/zephyr/Kconfig for full definition |
| config CHIP_OTA_REQUESTOR |
| bool |
| default y |
| imply BOOTLOADER_MCUBOOT |
| imply IMG_MANAGER |
| |
| config CHIP_OTA_REQUESTOR_BUFFER_SIZE |
| int "OTA Requestor image buffer size" |
| default 256 |
| depends on CHIP_OTA_REQUESTOR |
| help |
| Configures size of the buffer used by OTA Requestor when downloading and |
| writing a new firmware image to flash. |
| |
| config CHIP_OTA_REQUESTOR_REBOOT_ON_APPLY |
| bool "Auto-reboot when firmware update is applied" |
| default y |
| depends on CHIP_OTA_REQUESTOR |
| imply REBOOT |
| help |
| When a user consents to apply a firmware update, and the update package is |
| downloaded, reboot the device automatically to swap the old and the new |
| firmware images. |
| |
| # See config/zephyr/Kconfig for full definition |
| config CHIP_OTA_IMAGE_BUILD |
| bool |
| default y if CHIP_OTA_REQUESTOR |
| |
| config CHIP_EXAMPLE_DEVICE_INFO_PROVIDER |
| bool "Include default device information provider build" |
| default y |
| |
| # Enable getting reboot reasons information |
| config HWINFO |
| bool |
| default y |
| |
| config CHIP_FACTORY_DATA |
| bool "Enable Factory Data support" |
| select ZCBOR |
| help |
| Enables support for reading factory data from flash memory partition. |
| It requires factory_data partition to exist. |
| |
| config CHIP_FACTORY_DATA_CUSTOM_BACKEND |
| bool "Enable Factory Data custom backend" |
| depends on !CHIP_FACTORY_DATA |
| help |
| Enables user custom factory data implementation. It cannot be used |
| with the CHIP_FACTORY_DATA that enabled default Telink factory data |
| implementation. |
| |
| config CHIP_FACTORY_DATA_BUILD |
| bool "Enable Factory Data build" |
| default n |
| help |
| Enables generation of factory data during the building. |
| It requires factory_data partition to exist. |
| As a result a new output file factory_data.bin will be created. |
| |
| config CHIP_FACTORY_DATA_VERSION |
| int |
| default 1 |
| help |
| The Factory data version contains a current version of a factory data |
| parameter set that the user cannot change. |
| After moving to the next version of the factory data set, change the default value. |
| This config is used to validate the version of a factory data set on a device-side |
| with the version of factory data saved in the Flash memory. |
| |
| if CHIP_FACTORY_DATA_BUILD |
| |
| # Factory data definitions |
| config CHIP_FACTORY_DATA_MERGE_WITH_FIRMWARE |
| bool "Enable merging generated factory data with the build target .bin file" |
| default y |
| help |
| Enables merging generated factory data with the build target zephyr.bin file. |
| As a result, output file zephyr.bin will consist of all partitions including |
| factory data. |
| |
| # Use default certificates without generating or providing them |
| config CHIP_FACTORY_DATA_USE_DEFAULT_CERTS |
| bool "Use default certificates located in Matter repository" |
| default y |
| help |
| Pre-generated certificates can be used for development purpose. |
| This config includes default pre-generated certificates |
| which are located in credentials/development/attestation/ directory |
| instead of generating new ones. |
| If this config is set to `n` new certificates will be generated. |
| |
| # Configs for SPAKE2 generation |
| config CHIP_FACTORY_DATA_GENERATE_SPAKE2_VERIFIER |
| bool "Enable spake2 verifier generation" |
| help |
| Enables generation of spake2 verifier according to |
| given iteration counter, salt and passcode. |
| To generate Spake2 verifier a spake2p executable must be available |
| from system variables environment. |
| |
| config CHIP_DEVICE_GENERATE_ROTATING_DEVICE_UID |
| bool "Enable generation of a new Rotating device id unique id" |
| default y |
| help |
| Enables generation of a new Rotating device id unique id. |
| |
| endif #CHIP_FACTORY_DATA_BUILD |
| |
| # Factory data parameters |
| config CHIP_DEVICE_SERIAL_NUMBER |
| string "Serial number of device" |
| default "11223344556677889900" |
| help |
| A serial number parameter defines an unique number of manufactured device. |
| Maximum length of serial number is 32 characters. |
| |
| config CHIP_DEVICE_VENDOR_NAME |
| string "Human-readable vendor name" |
| default "Telink Semiconductor" |
| help |
| A human-readable vendor name which provides a simple string |
| containing identification of device's vendor for the Content APP. |
| This information should be included in the Matter Basic Cluster. |
| |
| config CHIP_DEVICE_PRODUCT_NAME |
| string "Human-readable product name" |
| default "not-specified" |
| help |
| A human-readable product name which provides a simple string |
| containing identification of the product for the Content APP. |
| |
| config CHIP_DEVICE_MANUFACTURING_DATE |
| string "Manufacturing date in ISO 8601" |
| default "2022-01-01" |
| help |
| A manufacturing date specifies the date that the device was manufactured. |
| The format used for providing a manufacturing date is ISO 8601 e.g. YYYY-MM-DD. |
| |
| config CHIP_DEVICE_HARDWARE_VERSION |
| int "Integer representation of hardware version" |
| default 0 |
| help |
| A hardware version number specifies the version number |
| of the hardware of the device. The meaning of its value, |
| and the versioning scheme, are vendor defined. |
| |
| config CHIP_DEVICE_HARDWARE_VERSION_STRING |
| string "user-friendly string representation of hardware version" |
| default "prerelease" |
| help |
| A hardware version string parameter specifies the version |
| of the hardware of the device as a more user-friendly value |
| than that represented by the hardware version integer value. |
| The meaning of its value, and the versioning scheme, are |
| vendor defined. |
| |
| config CHIP_DEVICE_DISCRIMINATOR |
| hex "Device pairing discriminator" |
| default 0xF00 |
| help |
| A 12-bit value matching the field of the same name in |
| the setup code. Discriminator is used during |
| a discovery process. |
| |
| config CHIP_DEVICE_SPAKE2_PASSCODE |
| int "Spake2+ passcode" |
| default 20202021 |
| range 1 99999998 |
| help |
| A pairing passcode is a 27-bit unsigned integer which serves |
| as a proof of possession during commissioning. |
| Its value shall be restricted to the values 0x0000001 to 0x5F5E0FE |
| (00000001 to 99999998 in decimal), excluding the invalid Passcode values: |
| - 00000000, 11111111, 22222222, 33333333, 44444444, 55555555, |
| 66666666, 77777777, 88888888, 99999999, 12345678, 87654321. |
| |
| config CHIP_DEVICE_SPAKE2_IT |
| int "Spake2+ iteration count" |
| default 1000 |
| help |
| The Spake2 iteration count is associated with the ephemeral |
| PAKE passcode verifier to be used for the commissioning. |
| The iteration count is used as a crypto parameter to process |
| spake2 verifier. |
| |
| config CHIP_DEVICE_SPAKE2_SALT |
| string "Spake2+ salt in string format" |
| default "U1BBS0UyUCBLZXkgU2FsdA==" |
| help |
| The spake2 salt is random data that is used as an additional input |
| to a one-way function that “hashes” data. |
| A new salt should be randomly generated for each password. |
| The minimum length of spake2 salt is 16 Bytes. |
| The maximum length of spake2 salt is 32 Bytes. |
| |
| config CHIP_DEVICE_SPAKE2_TEST_VERIFIER |
| string "Testing spake2+ verifier" |
| default "uWFwqugDNGiEck/po7KHwwMwwqZgN10XuyBajPGuyzUEV/iree4lOrao5GuwnlQ65CJzbeUB49s31EH+NEkg0JVI5MGCQGMMT/SRPFNRODm3wH/MBiehuFc6FJ/NH6Rmzw==" |
| help |
| The spake 2 verifier generated using default SPAKE2 salt, |
| iteration count and passcode. This value can be used for development |
| or testing purposes. |
| Generated with: |
| spake2p gen-verifier -o - -i 1000 -s "U1BBS0UyUCBLZXkgU2FsdA==" -p 20202021 |
| |
| config CHIP_DEVICE_ROTATING_DEVICE_UID |
| string "A rotating device id unique id" |
| default "91a9c12a7c80700a31ddcfa7fce63e44" |
| help |
| A device rotating id unique id which will be generated if |
| this config is not set in prj.conf file. |
| |
| config CHIP_DEVICE_ENABLE_KEY |
| string "Enable Key for triggering test actions on device" |
| default "00112233445566778899AABBCCDDEEFF" |
| help |
| The Enable Key is a 128-bit value that triggers test action |
| while invoking the TestEventTrigger Command. |
| Pattern: "FFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFF" |
| This value is used during Certification Tests, |
| and should not be present on production devices. |
| |
| config CHIP_CERTIFICATION_DECLARATION_STORAGE |
| bool "Enable storing Certification Declaration" |
| depends on CHIP_FACTORY_DATA |
| help |
| Enables storing Certification Declaration in Zephyr settings |
| instead of using hardcoded value from firmware. It also adds |
| support for including new Certification Declaration into a firmware |
| update image package sent via OTA Software Update. |
| |
| if CHIP_CERTIFICATION_DECLARATION_STORAGE |
| |
| config CHIP_CERTIFiCATION_DECLARATION_OTA_IMAGE_ID |
| int "Certification declaration OTA image id" |
| default 205 #0xcd |
| help |
| The image id of Certification Declaration image |
| for sending it via OTA Software Update purposes. |
| |
| endif |
