blob: 516d51e3abde4e1773ce4f99941dd7bae88e047c [file] [log] [blame]
#!/usr/bin/env python3
# Copyright (c) 2020 Project CHIP Authors
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
import json
import optparse
import os
import re
import shutil
import sys
import tarfile
import textwrap
from typing import Any, Dict
import constants
import stateful_shell
import yaml
from sample_app_util import zap_file_parser
TermColors = constants.TermColors
shell = stateful_shell.StatefulShell()
_CHEF_SCRIPT_PATH = os.path.abspath(os.path.dirname(__file__))
_REPO_BASE_PATH = os.path.join(_CHEF_SCRIPT_PATH, "../../")
_DEVICE_FOLDER = os.path.join(_CHEF_SCRIPT_PATH, "devices")
_DEVICE_LIST = [file[:-4]
for file in os.listdir(_DEVICE_FOLDER) if file.endswith(".zap")]
_CICD_CONFIG_FILE_NAME = os.path.join(_CHEF_SCRIPT_PATH, "cicd_config.json")
_CD_STAGING_DIR = os.path.join(_CHEF_SCRIPT_PATH, "staging")
gen_dir = "" # Filled in after sample app type is read from args.
def splash() -> None:
splashText = textwrap.dedent(
f"""\
{TermColors.STRBOLD}{TermColors.STRYELLOW}
______ __ __ _______ _______
/ || | | | | ____|| ____|
| ,----'| |__| | | |__ | |__
| | | __ | | __| | __|
| `----.| | | | | |____ | |
\\______||__| |__| |_______||__|{TermColors.STRRESET}
""")
flush_print(splashText)
def load_config() -> None:
config = dict()
config["nrfconnect"] = dict()
config["esp32"] = dict()
config["silabs-thread"] = dict()
config["ameba"] = dict()
configFile = f"{_CHEF_SCRIPT_PATH}/config.yaml"
if (os.path.exists(configFile)):
configStream = open(configFile, 'r')
config = yaml.load(configStream, Loader=yaml.SafeLoader)
configStream.close()
else:
flush_print("Running for the first time and configuring config.yaml. " +
"Change this configuration file to include correct configuration " +
"for the vendor's SDK")
configStream = open(configFile, 'w')
config["nrfconnect"]["ZEPHYR_BASE"] = os.environ.get('ZEPHYR_BASE')
config["nrfconnect"]["TTY"] = None
config["esp32"]["IDF_PATH"] = os.environ.get('IDF_PATH')
config["esp32"]["TTY"] = None
config["silabs-thread"]["GECKO_SDK"] = f"{_REPO_BASE_PATH}third_party/efr32_sdk/repo"
config["silabs-thread"]["TTY"] = None
config["silabs-thread"]["CU"] = None
config["silabs-thread"]["SILABS_BOARD"] = None
config["ameba"]["AMEBA_SDK"] = None
config["ameba"]["MATTER_SDK"] = None
config["ameba"]["MODEL"] = 'D'
config["ameba"]["TTY"] = None
flush_print(yaml.dump(config))
yaml.dump(config, configStream)
configStream.close()
return config
def check_python_version() -> None:
if sys.version_info[0] < 3:
flush_print('Must use Python 3. Current version is ' +
str(sys.version_info[0]))
exit(1)
def load_cicd_config() -> Dict[str, Any]:
with open(_CICD_CONFIG_FILE_NAME) as config_file:
config = json.loads(config_file.read())
return config
def flush_print(
to_print: str,
with_border: bool = False) -> None:
"""Prints and flushes stdout buffer.
Args:
to_print: The string to print.
with_border: Add boarder above and below to_print.
"""
if with_border:
border = ('-' * len(to_print)) + '\n'
to_print = f"{border}{to_print}\n{border}"
print(to_print, flush=True)
def unwrap_cmd(cmd: str) -> str:
"""Dedent and replace new line with space."""
return textwrap.dedent(cmd).replace("\n", " ")
def bundle(platform: str, device_name: str) -> None:
"""Filters files from the build output folder for CD.
Clears _CD_STAGING_DIR.
Calls bundle_{platform}(device_name).
exit(1) for missing bundle_{platform}.
Adds .matter files into _CD_STAGING_DIR.
Generates metadata for device in _CD_STAGING_DIR.
Args:
platform: The platform to bundle.
device_name: The example to bundle.
"""
bundler_name = f"bundle_{platform}"
matter_file = f"{device_name}.matter"
zap_file = os.path.join(_DEVICE_FOLDER, f"{device_name}.zap")
flush_print(f"Bundling {platform}", with_border=True)
flush_print(f"Cleaning {_CD_STAGING_DIR}")
shutil.rmtree(_CD_STAGING_DIR, ignore_errors=True)
os.mkdir(_CD_STAGING_DIR)
flush_print(f"Checking for {bundler_name}")
chef_module = sys.modules[__name__]
if hasattr(chef_module, bundler_name):
flush_print(f"Found {bundler_name}")
bundler = getattr(chef_module, bundler_name)
bundler(device_name)
else:
flush_print(f"No bundle function for {platform}!")
exit(1)
flush_print(f"Copying {matter_file}")
src_item = os.path.join(_DEVICE_FOLDER,
matter_file)
dest_item = os.path.join(_CD_STAGING_DIR, matter_file)
shutil.copy(src_item, dest_item)
flush_print(f"Generating metadata for {device_name}")
metadata_file = zap_file_parser.generate_metadata_file(zap_file)
metadata_dest = os.path.join(_CD_STAGING_DIR,
os.path.basename(metadata_file))
shutil.copy(metadata_file, metadata_dest)
#
# Per-platform bundle functions
#
def bundle_linux(device_name: str) -> None:
linux_root = os.path.join(_CHEF_SCRIPT_PATH,
"linux",
"out")
map_file_name = f"{device_name}.map"
src_item = os.path.join(linux_root, device_name)
dest_item = os.path.join(_CD_STAGING_DIR, device_name)
shutil.copy(src_item, dest_item)
src_item = os.path.join(linux_root, map_file_name)
dest_item = os.path.join(_CD_STAGING_DIR, map_file_name)
shutil.copy(src_item, dest_item)
def bundle_nrfconnect(device_name: str) -> None:
zephyr_exts = ["elf", "map", "hex"]
script_files = ["firmware_utils.py",
"nrfconnect_firmware_utils.py"]
nrf_root = os.path.join(_CHEF_SCRIPT_PATH,
"nrfconnect",
"build",
"zephyr")
scripts_root = os.path.join(_REPO_BASE_PATH,
"scripts",
"flashing")
gen_script_path = os.path.join(scripts_root,
"gen_flashing_script.py")
sub_dir = os.path.join(_CD_STAGING_DIR, device_name)
os.mkdir(sub_dir)
for zephyr_ext in zephyr_exts:
input_base = f"zephyr.{zephyr_ext}"
output_base = f"{device_name}.{zephyr_ext}"
src_item = os.path.join(nrf_root, input_base)
if zephyr_ext == "hex":
dest_item = os.path.join(sub_dir, output_base)
else:
dest_item = os.path.join(_CD_STAGING_DIR, output_base)
shutil.copy(src_item, dest_item)
for script_file in script_files:
src_item = os.path.join(scripts_root, script_file)
dest_item = os.path.join(sub_dir, script_file)
shutil.copy(src_item, dest_item)
shell.run_cmd(f"cd {sub_dir}")
command = f"""\
python3 {gen_script_path} nrfconnect
--output {device_name}.flash.py
--application {device_name}.hex"""
shell.run_cmd(unwrap_cmd(command))
def bundle_esp32(device_name: str) -> None:
"""Reference example for bundle_{platform}
functions, which should copy/move files from a build
output dir into _CD_STAGING_DIR to be archived.
Args:
device_name: The device to bundle.
"""
esp_root = os.path.join(_CHEF_SCRIPT_PATH,
"esp32",
"build")
manifest_file = os.path.join(esp_root,
"chip-shell.flashbundle.txt")
with open(manifest_file) as manifest:
for item in manifest:
item = item.strip()
src_item = os.path.join(esp_root, item)
dest_item = os.path.join(_CD_STAGING_DIR, item)
os.makedirs(os.path.dirname(dest_item), exist_ok=True)
shutil.copy(src_item, dest_item)
def main() -> int:
check_python_version()
config = load_config()
cicd_config = load_cicd_config()
#
# Build environment switches
#
if sys.platform == "win32":
flush_print(
'Windows is currently not supported. Use Linux or MacOS platforms')
exit(1)
#
# Arguments parser
#
deviceTypes = "\n ".join(_DEVICE_LIST)
usage = textwrap.dedent(f"""\
usage: chef.py [options]
Platforms:
nrfconnect
esp32
linux
silabs-thread
ameba
Device Types:
{deviceTypes}
Notes:
- Whenever you change a device type, make sure to also use options -zbe
- Be careful if you have more than one device connected.
The script assumes you have only one device connected and might flash the wrong one
""")
parser = optparse.OptionParser(usage=usage)
parser.add_option("-u", "--update_toolchain", help="updates toolchain & installs zap",
action="store_true", dest="do_update_toolchain")
parser.add_option("-b", "--build", help="builds",
action="store_true", dest="do_build")
parser.add_option("-c", "--clean", help="clean build. Only valid if also building",
action="store_true", dest="do_clean")
parser.add_option("-f", "--flash", help="flashes device",
action="store_true", dest="do_flash")
parser.add_option("-e", "--erase", help="erases flash before flashing. Only valid if also flashing",
action="store_true", dest="do_erase")
parser.add_option("-i", "--terminal", help="opens terminal to interact with with device",
action="store_true", dest="do_interact")
parser.add_option("-m", "--menuconfig", help="runs menuconfig on platforms that support it",
action="store_true", dest="do_menuconfig")
parser.add_option("-z", "--zap", help="runs zap to generate data model & interaction model artifacts",
action="store_true", dest="do_run_zap")
parser.add_option("-g", "--zapgui", help="runs zap GUI display to allow editing of data model",
action="store_true", dest="do_run_gui")
parser.add_option("-d", "--device", dest="sample_device_type_name",
help="specifies device type. Default is lighting. See info above for supported device types",
metavar="TARGET", choices=_DEVICE_LIST)
parser.add_option("-t", "--target", type='choice',
action='store',
dest="build_target",
help="specifies target platform. Default is esp32. See info below for currently supported target platforms",
choices=['nrfconnect', 'esp32',
'linux', 'silabs-thread', 'ameba'],
metavar="TARGET",
default="esp32")
parser.add_option("-r", "--rpc",
help=("enables Pigweed RPC interface. Enabling RPC disables the shell interface. "
"Your sdkconfig configurations will be reverted to default. Default is PW RPC off. "
"When enabling or disabling this flag, on the first build force a clean build with -c"),
action="store_true", dest="do_rpc", default=False)
parser.add_option("-a", "--automated_test_stamp",
help="provide the additional stamp \"branch:commit_id\" as the software version string for automated tests.",
action="store_true", dest="do_automated_test_stamp")
parser.add_option("-v", "--vid", dest="vid", type=int,
help="specifies the Vendor ID. Default is 0xFFF1", metavar="VID", default=0xFFF1)
parser.add_option("-p", "--pid", dest="pid", type=int,
help="specifies the Product ID. Default is 0x8000", metavar="PID", default=0x8000)
parser.add_option("-P", "--pname", dest="pname", type=str, metavar="PRODUCT_NAME",
help="specifies the Product Name. Default is TEST_PRODUCT", default="TEST_PRODUCT")
parser.add_option("", "--rpc_console", help="Opens PW RPC Console",
action="store_true", dest="do_rpc_console")
parser.add_option("-y", "--tty",
help="Enumerated USB tty/serial interface enumerated for your physical device. E.g.: /dev/ACM0",
dest="tty", metavar="TTY", default=None)
# Build CD params.
parser.add_option("", "--build_all",
help=("For use in CD only. Builds and bundles all chef examples for "
"the specified platform. Chef exits after completion."),
dest="build_all", action="store_true")
parser.add_option("", "--dry_run", help="Display list of target builds of the --build_all command without building them.",
dest="dry_run", action="store_true")
parser.add_option("", "--build_exclude",
help=("For use with --build_all. Build labels to exclude. "
"Accepts a regex pattern. Mutually exclusive with --build_include."),
dest="build_exclude")
parser.add_option("", "--build_include",
help=("For use with --build_all. Build labels to include. "
"Accepts a regex pattern. Mutually exclusive with --build_exclude."),
dest="build_include")
parser.add_option("-k", "--keep_going",
help="For use in CD only. Continues building all sample apps in the event of an error.",
dest="keep_going", action="store_true")
parser.add_option("", "--ci",
help=("Builds Chef examples defined in cicd_config. "
"Uses specified target from -t. Chef exits after completion."),
dest="ci", action="store_true")
parser.add_option(
"", "--enable_ipv4", help="Enable IPv4 mDNS. Only applicable to platforms that can support IPV4 (e.g, Linux, ESP32)",
action="store_true", default=False)
parser.add_option(
"", "--cpu_type", help="CPU type to compile for. Linux only.", choices=["arm64", "arm", "x64"])
options, _ = parser.parse_args(sys.argv[1:])
splash()
#
# CI
#
if options.ci:
for device_name in cicd_config["ci_allow_list"]:
if device_name not in _DEVICE_LIST:
flush_print(
f"{device_name} in CICD config but not {_DEVICE_FOLDER}!")
exit(1)
if options.build_target == "nrfconnect":
shell.run_cmd(
"export GNUARMEMB_TOOLCHAIN_PATH=\"$PW_ARM_CIPD_INSTALL_DIR\"")
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}")
command = f"./chef.py -cbr -d {device_name} -t {options.build_target}"
flush_print(f"Building {command}", with_border=True)
shell.run_cmd(command)
bundle(options.build_target, device_name)
exit(0)
#
# CD
#
if options.build_all:
if options.build_include and options.build_exclude:
flush_print(
"Error. --build_include and --build_exclude are mutually exclusive options.")
exit(1)
flush_print("Building all chef examples")
archive_prefix = "/workspace/artifacts/"
archive_suffix = ".tar.gz"
failed_builds = []
for device_name in _DEVICE_LIST:
for platform, label_args in cicd_config["cd_platforms"].items():
for label, args in label_args.items():
archive_name = f"{label}-{device_name}"
if options.build_exclude and re.search(options.build_exclude, archive_name):
continue
elif options.build_include and not re.search(options.build_include, archive_name):
continue
if options.dry_run:
flush_print(archive_name)
continue
command = f"./chef.py -cbr -d {device_name} -t {platform} "
command += " ".join(args)
flush_print(f"Building {command}", with_border=True)
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}")
shell.run_cmd(
"export GNUARMEMB_TOOLCHAIN_PATH=\"$PW_ARM_CIPD_INSTALL_DIR\"")
try:
shell.run_cmd(command)
except RuntimeError as build_fail_error:
failed_builds.append((device_name, platform, "build"))
flush_print(str(build_fail_error))
if not options.keep_going:
exit(1)
continue
try:
bundle(platform, device_name)
except FileNotFoundError as bundle_fail_error:
failed_builds.append((device_name, platform, "bundle"))
flush_print(str(bundle_fail_error))
if not options.keep_going:
exit(1)
continue
os.makedirs(archive_prefix, exist_ok=True)
archive_full_name = archive_prefix + archive_name + archive_suffix
flush_print(
f"Adding build output to archive {archive_full_name}")
if os.path.exists(archive_full_name):
os.remove(archive_full_name)
with tarfile.open(archive_full_name, "w:gz") as tar:
tar.add(_CD_STAGING_DIR, arcname=".")
if len(failed_builds) == 0:
flush_print("No build failures", with_border=True)
else:
flush_print("Logging build failures", with_border=True)
for failed_build in failed_builds:
fail_log = f"""\
Device: {failed_build[0]},
Platform: {failed_build[1]},
Phase: {failed_build[2]}"""
flush_print(unwrap_cmd(fail_log))
exit(0)
#
# Platform Folder
#
flush_print(f"Target is set to {options.sample_device_type_name}")
global gen_dir
gen_dir = (
f"{_CHEF_SCRIPT_PATH}/out/{options.sample_device_type_name}/zap-generated/")
flush_print("Setting up environment...")
if options.build_target == "esp32":
if config['esp32']['IDF_PATH'] is None:
flush_print(
'Path for esp32 SDK was not found. Make sure esp32.IDF_PATH is set on your config.yaml file')
exit(1)
shell.run_cmd(f'source {config["esp32"]["IDF_PATH"]}/export.sh')
elif options.build_target == "nrfconnect":
if config['nrfconnect']['ZEPHYR_BASE'] is None:
flush_print(
'Path for nrfconnect SDK was not found. Make sure nrfconnect.ZEPHYR_BASE is set on your config.yaml file')
exit(1)
shell.run_cmd(
f'source {config["nrfconnect"]["ZEPHYR_BASE"]}/zephyr-env.sh')
shell.run_cmd("export ZEPHYR_TOOLCHAIN_VARIANT=gnuarmemb")
elif options.build_target == "linux":
pass
elif options.build_target == "silabs-thread":
flush_print('Path to gecko sdk is configured within Matter.')
if 'SILABS_BOARD' not in config['silabs-thread'] or config['silabs-thread']['SILABS_BOARD'] is None:
flush_print(
'SILABS_BOARD was not configured. Make sure silabs-thread.SILABS_BOARD is set on your config.yaml file')
exit(1)
silabs_board = config['silabs-thread']['SILABS_BOARD']
elif options.build_target == "ameba":
if config['ameba']['AMEBA_SDK'] is None:
flush_print(
'Path for Ameba SDK was not found. Make sure AMEBA_SDK is set on your config.yaml file')
exit(1)
if config['ameba']['MATTER_SDK'] is None:
flush_print(
'Path for Matter SDK was not found. Make sure MATTER_SDK is set on your config.yaml file')
exit(1)
if (config['ameba']['MODEL'] != 'D' and config['ameba']['MODEL'] != 'Z2'):
flush_print("Ameba Model is not recognized, please input D or Z2")
exit(1)
else:
flush_print(f"Target {options.build_target} not supported")
shell.run_cmd(f"source {_REPO_BASE_PATH}/scripts/activate.sh")
#
# Toolchain update
#
if options.do_update_toolchain:
if options.build_target == "esp32":
flush_print("ESP32 toolchain update not supported. Skipping")
elif options.build_target == "nrfconnect":
flush_print("Updating toolchain")
shell.run_cmd(
f"cd {_REPO_BASE_PATH} && python3 scripts/setup/nrfconnect/update_ncs.py --update")
elif options.build_target == "silabs-thread":
flush_print("Silabs-thread toolchain not supported. Skipping")
elif options.build_target == "linux":
flush_print("Linux toolchain update not supported. Skipping")
elif options.build_target == "Ameba":
flush_print("Ameba toolchain update not supported. Skipping")
#
# Clean environment
#
if options.do_clean:
if options.build_target == "esp32":
shell.run_cmd(f"rm -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig")
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32")
shell.run_cmd(f"rm -rf {_CHEF_SCRIPT_PATH}/esp32/build")
shell.run_cmd("idf.py fullclean")
#
# Cluster customization
#
if options.do_run_gui:
flush_print("Starting ZAP GUI editor")
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/devices")
shell.run_cmd(
f"{_REPO_BASE_PATH}/scripts/tools/zap/run_zaptool.sh {options.sample_device_type_name}.zap")
if options.do_run_zap:
flush_print("Running ZAP script to generate artifacts")
shell.run_cmd(f"rm -rf {gen_dir}")
shell.run_cmd(f"mkdir -p {gen_dir}")
shell.run_cmd(
f"{_REPO_BASE_PATH}/scripts/tools/zap/generate.py "
f"{_CHEF_SCRIPT_PATH}/devices/{options.sample_device_type_name}.zap -o {gen_dir}")
# af-gen-event.h is not generated
shell.run_cmd(f"touch {gen_dir}/af-gen-event.h")
#
# Setup environment
#
if options.do_rpc:
flush_print("RPC PW enabled")
if options.build_target == "esp32":
shell.run_cmd(
f"export SDKCONFIG_DEFAULTS={_CHEF_SCRIPT_PATH}/esp32/sdkconfig_rpc.defaults")
shell.run_cmd(
f"[ -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig ] || cp "
f"{_CHEF_SCRIPT_PATH}/esp32/sdkconfig_rpc.defaults {_CHEF_SCRIPT_PATH}/esp32/sdkconfig")
else:
flush_print(f"RPC PW on {options.build_target} not supported")
else:
flush_print("RPC PW disabled")
if (options.build_target == "esp32"):
shell.run_cmd(
f"export SDKCONFIG_DEFAULTS={_CHEF_SCRIPT_PATH}/esp32/sdkconfig.defaults")
shell.run_cmd(
f"[ -f {_CHEF_SCRIPT_PATH}/esp32/sdkconfig ] || cp "
f"{_CHEF_SCRIPT_PATH}/esp32/sdkconfig.defaults {_CHEF_SCRIPT_PATH}/esp32/sdkconfig")
#
# Menuconfig
#
if options.do_menuconfig:
if options.build_target == "esp32":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32")
shell.run_cmd("idf.py menuconfig")
elif options.build_target == "nrfconnect":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect")
shell.run_cmd("west build -t menuconfig")
elif (options.build_target == "silabs-thread") or (options.build_target == "silabs-wifi"):
flush_print(
"Menuconfig not available on Silabs-thread target. Skipping")
elif options.build_target == "linux":
flush_print("Menuconfig not available on Linux target. Skipping")
elif options.build_target == "Ameba":
flush_print("Menuconfig not available on Ameba target. Skipping")
#
# Build
#
if options.do_build:
sw_ver_string = ""
if options.do_automated_test_stamp:
branch = ""
for branch_text in shell.run_cmd("git branch", return_cmd_output=True).split("\n"):
match_texts = re.findall(r"\* (.*)", branch_text)
if match_texts:
branch = match_texts[0]
break
commit_id = shell.run_cmd(
"git rev-parse HEAD", return_cmd_output=True).replace("\n", "")
sw_ver_string = f"""{branch}:{commit_id}"""
# 64 bytes space could only contain 63 bytes string + 1 byte EOS.
if len(sw_ver_string) >= 64:
truncated_sw_ver_string = f"""{branch[:22]}:{commit_id}"""
flush_print(
f"Truncate the software version string from \"{sw_ver_string}\" to "
f"\"{truncated_sw_ver_string}\" due to 64 bytes limitation")
sw_ver_string = truncated_sw_ver_string
flush_print(f"Software Version String: \"{sw_ver_string}\"")
flush_print(
f"Product ID 0x{options.pid:02X} / Vendor ID 0x{options.vid:02X}")
flush_print("Building...")
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}")
if (options.build_target == "esp32") or (options.build_target == "nrfconnect") or (options.build_target == "ameba"):
with open("project_include.cmake", "w") as f:
f.write(textwrap.dedent(f"""\
set(CONFIG_DEVICE_VENDOR_ID {options.vid})
set(CONFIG_DEVICE_PRODUCT_ID {options.pid})
set(CONFIG_DEVICE_PRODUCT_NAME \"{options.pname}\")
set(CONFIG_ENABLE_PW_RPC {"1" if options.do_rpc else "0"})
set(SAMPLE_NAME {options.sample_device_type_name})
set(CHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING \"{sw_ver_string}\")"""))
if options.build_target == "esp32":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32")
if options.enable_ipv4:
shell.run_cmd(
"sed -i 's/CONFIG_DISABLE_IPV4=y/#\\ CONFIG_DISABLE_IPV4\\ is\\ not\\ set/g' sdkconfig ")
else:
shell.run_cmd(
"sed -i 's/#\\ CONFIG_DISABLE_IPV4\\ is\\ not\\ set/CONFIG_DISABLE_IPV4=y/g' sdkconfig ")
shell.run_cmd("idf.py build")
shell.run_cmd("idf.py build flashing_script")
shell.run_cmd(
f"(cd build/ && tar cJvf $(git rev-parse HEAD)-{options.sample_device_type_name}.tar.xz "
f"--files-from=chip-shell.flashbundle.txt)")
shell.run_cmd(
f"cp build/$(git rev-parse HEAD)-{options.sample_device_type_name}.tar.xz {_CHEF_SCRIPT_PATH}")
elif options.build_target == "nrfconnect":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect")
nrf_build_cmds = ["west build -b nrf52840dk_nrf52840"]
if options.do_clean:
nrf_build_cmds.append("-p always")
if options.do_rpc:
nrf_build_cmds.append("-- -DOVERLAY_CONFIG=rpc.overlay")
shell.run_cmd(" ".join(nrf_build_cmds))
elif options.build_target == "silabs-thread":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/efr32")
if options.do_clean:
shell.run_cmd(f"rm -rf out/{options.sample_device_type_name}")
efr32_cmd_args = []
efr32_cmd_args.append(
f'{_REPO_BASE_PATH}/scripts/examples/gn_efr32_example.sh')
efr32_cmd_args.append('./')
efr32_cmd_args.append(f'out/{options.sample_device_type_name}')
efr32_cmd_args.append(f'{silabs_board}')
efr32_cmd_args.append(
f'\'sample_name=\"{options.sample_device_type_name}\"\'')
if sw_ver_string:
efr32_cmd_args.append(
f'\'chip_device_config_device_software_version_string=\"{sw_ver_string}\"\'')
efr32_cmd_args.append('enable_openthread_cli=true')
if options.do_rpc:
efr32_cmd_args.append('chip_build_libshell=false')
efr32_cmd_args.append('\'import("//with_pw_rpc.gni")\'')
else:
efr32_cmd_args.append('chip_build_libshell=true')
shell.run_cmd(" ".join(efr32_cmd_args))
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}")
elif options.build_target == "ameba":
if config['ameba']['MODEL'] == 'D':
shell.run_cmd(
f"cd {config['ameba']['AMEBA_SDK']}/project/realtek_amebaD_va0_example/GCC-RELEASE")
if options.do_clean:
shell.run_cmd("rm -rf out")
shell.run_cmd(
f"./build.sh {config['ameba']['MATTER_SDK']} ninja "
f"{config['ameba']['AMEBA_SDK']}/project/realtek_amebaD_va0_example/GCC-RELEASE/out chef-app")
shell.run_cmd("ninja -C out")
elif config['ameba']['MODEL'] == 'Z2':
shell.run_cmd(
f"cd {config['ameba']['AMEBA_SDK']}/project/realtek_amebaz2_v0_example/GCC-RELEASE")
shell.run_cmd("rm -f project_include.mk")
cmd = f"{config['ameba']['AMEBA_SDK']}/project/realtek_amebaz2_v0_example/GCC-RELEASE/project_include.mk"
with open(cmd, "w") as f:
f.write(textwrap.dedent(f"""\
SAMPLE_NAME = {options.sample_device_type_name}
CHEF_FLAGS =
CHEF_FLAGS += -DCONFIG_DEVICE_VENDOR_ID={options.vid}
CHEF_FLAGS += -DCONFIG_DEVICE_PRODUCT_ID={options.pid}
CHEF_FLAGS += -DCHIP_DEVICE_CONFIG_DEVICE_SOFTWARE_VERSION_STRING=\"{options.pid}\"
"""
))
if options.do_clean:
shell.run_cmd("make clean")
shell.run_cmd("make chef")
shell.run_cmd("make is")
elif options.build_target == "linux":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/linux")
linux_args = []
if options.do_rpc:
linux_args.append('import("//with_pw_rpc.gni")')
linux_args.extend([
'import("//build_overrides/chip.gni")',
'import("${chip_root}/config/standalone/args.gni")',
'chip_shell_cmd_server = false',
'chip_build_libshell = true',
'chip_config_network_layer_ble = false',
(f'target_defines = ["CHIP_DEVICE_CONFIG_DEVICE_VENDOR_ID={options.vid}", '
f'"CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_ID={options.pid}", '
f'"CONFIG_ENABLE_PW_RPC={int(options.do_rpc)}", '
f'"CHIP_DEVICE_CONFIG_DEVICE_PRODUCT_NAME=\\"{str(options.pname)}\\""]'),
])
uname_resp = shell.run_cmd("uname -m", return_cmd_output=True)
if "aarch" not in uname_resp and "arm" not in uname_resp:
if options.cpu_type == "arm64":
if "SYSROOT_AARCH64" not in shell.env:
flush_print(
"SYSROOT_AARCH64 env variable not set. "
"AARCH64 toolchain needed for cross-compiling for arm64.")
exit(1)
shell.env["PKG_CONFIG_PATH"] = (
f'{shell.env["SYSROOT_AARCH64"]}/lib/aarch64-linux-gnu/pkgconfig')
linux_args.append('target_cpu="arm64"')
linux_args.append('is_clang=true')
linux_args.append('chip_crypto="mbedtls"')
linux_args.append(
f'sysroot="{shell.env["SYSROOT_AARCH64"]}"')
elif options.cpu_type == "arm":
if "SYSROOT_ARMHF" not in shell.env:
flush_print(
"SYSROOT_ARMHF env variable not set. "
"ARMHF toolchain needed for cross-compiling for arm.")
exit(1)
shell.env["PKG_CONFIG_PATH"] = (
f'{shell.env["SYSROOT_ARMHF"]}/lib/arm-linux-gnueabihf/pkgconfig')
linux_args.append('target_cpu="arm"')
linux_args.append('is_clang=true')
linux_args.append('chip_crypto="mbedtls"')
linux_args.append(
f'sysroot="{shell.env["SYSROOT_ARMHF"]}"')
if options.cpu_type == "x64":
uname_resp = shell.run_cmd("uname -m", return_cmd_output=True)
if "x64" not in uname_resp and "x86_64" not in uname_resp:
flush_print(
f"Unable to cross compile for x64 on {uname_resp}")
exit(1)
if options.enable_ipv4:
linux_args.append("chip_inet_config_enable_ipv4=true")
else:
linux_args.append("chip_inet_config_enable_ipv4=false")
if sw_ver_string:
linux_args.append(
f'chip_device_config_device_software_version_string = "{sw_ver_string}"')
with open(f"{_CHEF_SCRIPT_PATH}/linux/args.gni", "w") as f:
f.write("\n".join(linux_args))
with open(f"{_CHEF_SCRIPT_PATH}/linux/sample.gni", "w") as f:
f.write(textwrap.dedent(f"""\
sample_zap_file = "{options.sample_device_type_name}.zap"
sample_name = "{options.sample_device_type_name}"
"""))
if options.do_clean:
shell.run_cmd("rm -rf out")
shell.run_cmd("gn gen out")
shell.run_cmd("ninja -C out")
#
# Compilation DB TODO
#
#
# Flash
#
if options.do_flash:
flush_print("Flashing target")
if options.build_target == "esp32":
if config['esp32']['TTY'] is None:
flush_print(
'The path for the serial enumeration for esp32 is not set. Make sure esp32.TTY is set on your config.yaml file')
exit(1)
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32")
if options.do_erase:
shell.run_cmd(
f"idf.py -p {config['esp32']['TTY']} erase-flash")
shell.run_cmd(f"idf.py -p {config['esp32']['TTY']} flash")
elif options.build_target == "nrfconnect":
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/nrfconnect")
if options.do_erase:
shell.run_cmd("west flash --erase")
else:
shell.run_cmd("west flash")
elif (options.build_target == "silabs-thread") or (options.build_target == "silabs-wifi"):
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/efr32")
shell.run_cmd(
f"python3 out/{options.sample_device_type_name}/{silabs_board}/matter-silabs-chef-example.flash.py")
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}")
elif (options.build_target == "ameba"):
if config['ameba']['MODEL'] == 'D':
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/ameba")
shell.run_cmd(
f"cd {config['ameba']['AMEBA_SDK']}/tools/AmebaD/Image_Tool_Linux")
shell.run_cmd((
f"{config['ameba']['AMEBA_SDK']}/tools/AmebaD/Image_Tool_Linux/flash.sh "
f"{config['ameba']['TTY']} {config['ameba']['AMEBA_SDK']}"
f"/project/realtek_amebaD_va0_example/GCC-RELEASE/out"
), raise_on_returncode=False)
else:
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/ameba")
shell.run_cmd(
f"cd {config['ameba']['AMEBA_SDK']}/tools/AmebaZ2/Image_Tool_Linux")
shell.run_cmd((
f"{config['ameba']['AMEBA_SDK']}/tools/AmebaZ2/Image_Tool_Linux/flash.sh "
f"{config['ameba']['TTY']} {config['ameba']['AMEBA_SDK']}"
f"/project/realtek_amebaz2_v0_example/GCC-RELEASE/application_is/Debug/bin"
), raise_on_returncode=False)
#
# Terminal interaction
#
if options.do_interact:
flush_print("Starting terminal...")
if options.build_target == "esp32":
if config['esp32']['TTY'] is None:
flush_print(
'The path for the serial enumeration for esp32 is not set. '
'Make sure esp32.TTY is set on your config.yaml file')
exit(1)
shell.run_cmd(f"cd {_CHEF_SCRIPT_PATH}/esp32")
shell.run_cmd(f"idf.py -p {config['esp32']['TTY']} monitor")
elif options.build_target == "nrfconnect":
if config['nrfconnect']['TTY'] is None:
flush_print(
'The path for the serial enumeration for nordic is not set. '
'Make sure nrfconnect.TTY is set on your config.yaml file')
exit(1)
shell.run_cmd("killall screen")
shell.run_cmd(f"screen {config['nrfconnect']['TTY']} 115200")
elif (options.build_target == "silabs-thread"):
if config['silabs-thread']['TTY'] is None:
flush_print(
'The path for the serial enumeration for silabs-thread is not set. '
'Make sure silabs-thread.TTY is set on your config.yaml file')
exit(1)
shell.run_cmd("killall screen")
shell.run_cmd(
f"screen {config['silabs-thread']['TTY']} 115200 8-N-1")
elif options.build_target == "linux":
flush_print(
f"{_CHEF_SCRIPT_PATH}/linux/out/{options.sample_device_type_name}")
shell.run_cmd(
f"{_CHEF_SCRIPT_PATH}/linux/out/{options.sample_device_type_name}")
elif options.build_target == "ameba":
if config['ameba']['TTY'] is None:
flush_print(
'The path for the serial enumeration for ameba is not set. Make sure ameba.TTY is set on your config.yaml file')
exit(1)
if config['ameba']['MODEL'] == 'D':
shell.run_cmd("killall screen")
shell.run_cmd(f"screen {config['ameba']['TTY']} 115200")
else:
flush_print("Ameba Z2 image has not been flashed yet")
#
# RPC Console
#
if options.do_rpc_console:
if options.build_target == "esp32":
shell.run_cmd(
f"python3 -m chip_rpc.console --device {config['esp32']['TTY']}")
elif (options.build_target == "silabs-thread"):
if (sys.platform == "linux") or (sys.platform == "linux2"):
if (config['silabs-thread']['TTY'] is None):
flush_print(
'The path for the serial enumeration for silabs-thread is not set. '
'Make sure silabs-thread.TTY is set on your config.yaml file')
exit(1)
shell.run_cmd(
f"python3 -m chip_rpc.console --device {config['silabs-thread']['TTY']} -b 115200")
elif sys.platform == "darwin":
if (config['silabs-thread']['CU'] is None):
flush_print(
'The path for the serial enumeration for silabs-thread is not set. '
'Make sure silabs-thread.CU is set on your config.yaml file')
exit(1)
shell.run_cmd(
f"python3 -m chip_rpc.console --device {config['silabs-thread']['CU']} -b 115200")
flush_print("Done")
return 0
if __name__ == '__main__':
sys.exit(main())