| # Copyright (c) 2021 Project CHIP Authors |
| # |
| # Licensed under the Apache License, Version 2.0 (the "License"); |
| # you may not use this file except in compliance with the License. |
| # You may obtain a copy of the License at |
| # |
| # http://www.apache.org/licenses/LICENSE-2.0 |
| # |
| # Unless required by applicable law or agreed to in writing, software |
| # distributed under the License is distributed on an "AS IS" BASIS, |
| # WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| # See the License for the specific language governing permissions and |
| # limitations under the License. |
| # Auto-generated scripts for harness use only, please review before automation. The endpoints and cluster names are currently set to default |
| |
| name: |
| 4.1.9. [TC-CADMIN-1.9] Device exit commissioning mode after 20 failed |
| commission attempts [ECM] [DUT - Commissionee] |
| |
| PICS: |
| - CADMIN.S |
| |
| config: |
| nodeId: 0x12344321 |
| cluster: "Basic Information" |
| endpoint: 0 |
| |
| tests: |
| - label: "Precondition" |
| verification: | |
| Reset Devices to factory defaults |
| disabled: true |
| |
| - label: "TH_CR1 starts a commissioning process with DUT_CE" |
| PICS: CADMIN.S |
| verification: | |
| "1. Provision the DUT_CE (all-cluster-app) device using TH_CR1 (chip-tool ) on the raspi" |
| disabled: true |
| |
| - label: |
| "TH_CR1 opens a commissioning window on DUT_CE using a commissioning |
| timeout of PIXIT.CADMIN.CwDuration seconds using ECM" |
| PICS: CADMIN.S.C00.Rsp |
| verification: | |
| On TH_CR1 send the below command |
| |
| ./chip-tool pairing open-commissioning-window 1 1 900 1000 3841 |
| |
| Verify the Open commisioning window on the DUT_CE(all-cluster-app) Log: |
| |
| [1660904553.796857][3537:3537] CHIP:DMG: Received command for Endpoint=0 Cluster=0x0000_003C Command=0x0000_0000 |
| [1660904553.796951][3537:3537] CHIP:ZCL: Received command to open commissioning window |
| [1660904553.797255][3537:3537] CHIP:IN: SecureSession[0xaaab142ef7f0]: Allocated Type:1 LSID:34523 |
| |
| Verify the Manual pairing code on the TH_CR1(chip-tool) Log: |
| |
| [1635864513.699433][3850:3855] CHIP:DMG: ICR moving to [CommandSen] |
| [1635864513.699489][3850:3855] CHIP:CTL: Manual pairing code: [36177160937] |
| [1635864513.699566][3850:3855] CHIP:CTL: SetupQRCode: [MT:00000CQM00YZN476420] |
| [1635864513.699636][3850:3855] CHIP:EM: Sending Standalone Ack for MessageCounter:2599714227 on exchange 60688i |
| [1635864513.699685][3850:3855] CHIP:IN: Prepared plaintext message 0xffff8a7cd960 to 0x0000000000000000 of type |
| disabled: true |
| |
| - label: "DNS-SD records shows DUT_CE advertising" |
| verification: | |
| On TH_CR1 send the below command |
| avahi-browse -rt _matterc._udp |
| |
| + eth0 IPv6 B755245DE9E5E186 _matterc._udp local |
| = eth0 IPv6 B755245DE9E5E186 _matterc._udp local |
| hostname = [E45F010F27530000.local] |
| address = [fe80::e65f:1ff:fe0f:2753] |
| port = [5540] |
| txt = [""PI="" ""PH=36"" ""CM=2"" ""D=3840"" ""T=1"" ""SAI=300"" ""SII=5000"" ""VP=65521+32769""]" |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration set in step 2, Set |
| up a TH_CR2 to start attempting to do PASE to DUT_CE and failing 20 |
| times. This can be done using a valid onboarding payload with an |
| incorrect setupcode" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR2 send the below command |
| |
| The manualcode with wrong setupcode is generated by using below command |
| ./chip-tool payload generate-manualcode --discriminator 0xF00 --setup-pin-code 20202022 --version 0 --vendor-id 0xFFF1 --product-id 0x8001 --commissioning-mode 0 |
| [1658404815.887421][2367:2367] CHIP:TOO: Manual Code: 34970212338 |
| |
| Attempt to do pairing with wrong manual code for 20 times |
| ./chip-tool pairing code 2 34970212338 --timeout 40 --commissioner-name beta |
| |
| Verify the failure response in any one of following error for 20 attempts of wrong passcode in TH_CR2(chip-tool) |
| |
| [1660903056.889713][31261:31266] CHIP:SC: Failed to verify peer's MAC. This can happen when setup code is incorrect. |
| [1660903056.889744][31261:31266] CHIP:SC: Sending status report. Protocol code 2, exchange 28732 |
| [1660903056.889781][31261:31266] CHIP:EM: Piggybacking Ack for MessageCounter:72597021 on exchange: 28732i |
| [1660903056.889817][31261:31266] CHIP:IN: Prepared unauthenticated message 0x7fbf5403c308 to 0x0000000000000000 (0) of type 0x40 and protocolId (0, 0) on exchange 28732i with MessageCounter:110107069. |
| [1660903056.889855][31261:31266] CHIP:IN: Sending unauthenticated msg 0x7fbf5403c308 with MessageCounter:110107069 to 0x0000000000000000 at monotonic time: 00000000012CB695 msec |
| [1660903056.890044][31261:31266] CHIP:IN: SecureSession[0x55686a679ff0]: Released - Type:1 LSID:10585 |
| [1660903056.890094][31261:31266] CHIP:SC: Failed during PASE session setup: ../../third_party/connectedhomeip/src/crypto/CHIPCryptoPALOpenSSL.cpp:1437: CHIP Error 0x000000AC: Internal error |
| (or) |
| [1678862522.832525][700613:700613] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1678862522.832537][700613:700613] CHIP:DL: Inet Layer shutdown |
| [1678862522.832545][700613:700613] CHIP:DL: BLE shutdown |
| [1678862522.832554][700613:700613] CHIP:DL: System Layer shutdown |
| [1678862522.832663][700613:700613] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:215: CHIP Error 0x00000003: Incorrect state |
| disabled: true |
| |
| - label: |
| "Before the expiration of PIXIT.CADMIN.CwDuration set in step 2, |
| TH_CR2 attempts to do PASE to DUT_CE using the correct onboarding |
| payload" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR2 send the below command (with correct passcode) |
| |
| ./chip-tool pairing code 2 36177160937 --commissioner-name beta |
| Verify the following error on 21st attempt using correct passcode in TH_CR2(chip-tool) |
| |
| [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini) |
| [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown |
| [1665484807.016163][5399:5399] CHIP:DL: BLE shutdown |
| [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown |
| [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state |
| disabled: true |
| |
| - label: |
| "TH_CR3 starts a commissioning process with DUT_CE using the correct |
| PAKEVerifier" |
| PICS: CADMIN.S |
| verification: | |
| On TH_CR3 send the below command (with correct passcode) |
| |
| ./chip-tool pairing code 3 36177160938 (With correct passcode) --commissioner-name gamma |
| |
| Verify the following error on correct passcode in TH_CR3(chip-tool) |
| |
| [1665484807.015876][5399:5399] CHIP:DL: renamed tmp file to file (/tmp/chip_counters.ini) |
| [1665484807.016042][5399:5399] CHIP:DL: NVS set: chip-counters/total-operational-hours = 0 (0x0) |
| [1665484807.016108][5399:5399] CHIP:DL: Inet Layer shutdown |
| [1665484807.016163][5399:5399] CHIP:DL: BLE shutdown |
| [1665484807.016215][5399:5399] CHIP:DL: System Layer shutdown |
| [1665484807.016460][5399:5399] CHIP:TOO: Run command failure: ../../commands/pairing/PairingCommand.cpp:164: CHIP Error 0x00000003: Incorrect state |
| disabled: true |
